HP-UX学习笔记
1.设置提示符前面显示完整路径
在/usr/lt/下编辑.profile
增加下面两行
PS1='${PWD}>'
export PS1
如果要支持输入中文
再增加一行
stty -istrip -parity cs8
2.执行.profile
/usr/lu>. ./.profile
在HP-UX平台上配置Apache需要注意的问题
HP-UX平台上配置Apache，和在其他平台上有所不同。需要设置用户和组，注意下面这段httpd.conf中的说明：
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
#
User nobody
Group #-1
需要修把User/Group修改为实际存在的用户和该用户所在的组名。
比如：
User www
Group other
否则，apache将无法正常启动。
4.把/usr/local/bin加入路径环境变量，加入/etc/PATH
在HP-UX上安装apache和Mysql和PHP的最简单过程
下载
mysql-max-4.0.20-hp-hpux11.11-hppa2.0w-64bit.tar.gz
httpd-2.0.50.tar.gz
php-4.3.8.tar.gz
首先解压缩
gzip -d *gz
再释放tar文件
tar xvf *tar
进入httpd-2.0.50和php-4.3.8
./configure
make
make install
注意在httpd.conf中有个地方
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
#
要改成下面的
User www
Group other
不然httpd无法启动
httpd -k start
注意我们没有用模块方式编译PHP必须在
httpd.conf加入
ScriptAlias /php/ "/usr/local/bin/"
AddType application/x-httpd-php .php .phtml
Action application/x-httpd-php "/php/php"
注意如果要使PHP能识别.php文件必须把.php文件的属性改成
chmod 755 *.php
进入mysql-max-4.0.20-hp-hpux11.11-hppa2.0w-64bit
按照INSTALL-BINARY说的做
shell> groupadd mysql
shell> useradd -g mysql mysql
shell> cd /usr/local
shell> gunzip < /path/to/mysql-VERSION-OS.tar.gz | tar xvf -
shell> ln -s full-path-to-mysql-VERSION-OS mysql
shell> cd mysql
shell> scripts/mysql_install_db --user=mysql
shell> chown -R root .
shell> chown -R mysql data
shell> chgrp -R mysql .
shell> bin/mysqld_safe --user=mysql &
注意把mysql-max-4.0.20-hp-hpux11.11-hppa2.0w-64bit目录直接mv过/usr/local去就不用
做第四行
一个有用的命令
如果建了一个包含“!”的目录名如Disczu!
通常的cp不能复制
可以这么干
find . -inum 1324 - exec cp -r {} Disczu