wpa_supplicant 驱动分析

1. 接口定义实现wpa_drivers

    wpa_drivers的定义如下：

 struct wpa_driver_ops *wpa_drivers[] =
 {
 #ifdef CONFIG_DRIVER_WEXT
     &wpa_driver_wext_ops,  // 我的系统使用的这个老的接口
 #endif /* CONFIG_DRIVER_WEXT */
 #ifdef CONFIG_DRIVER_NL80211   // 现在流行的NL80211接口
     &wpa_driver_nl80211_ops,
 #endif /* CONFIG_DRIVER_NL80211 */
 #ifdef CONFIG_DRIVER_HOSTAP
     &wpa_driver_hostap_ops,
 #endif /* CONFIG_DRIVER_HOSTAP */
 #ifdef CONFIG_DRIVER_MADWIFI
     &wpa_driver_madwifi_ops,
 #endif /* CONFIG_DRIVER_MADWIFI */
 #ifdef CONFIG_DRIVER_BROADCOM
     &wpa_driver_broadcom_ops,
 #endif /* CONFIG_DRIVER_BROADCOM */
 #ifdef CONFIG_DRIVER_BSD
     &wpa_driver_bsd_ops,
 #endif /* CONFIG_DRIVER_BSD */
 #ifdef CONFIG_DRIVER_NDIS
     &wpa_driver_ndis_ops,
 #endif /* CONFIG_DRIVER_NDIS */
 #ifdef CONFIG_DRIVER_WIRED
     &wpa_driver_wired_ops,
 #endif /* CONFIG_DRIVER_WIRED */
 #ifdef CONFIG_DRIVER_TEST
     &wpa_driver_test_ops,
 #endif /* CONFIG_DRIVER_TEST */
 #ifdef CONFIG_DRIVER_RALINK
     &wpa_driver_ralink_ops,
 #endif /* CONFIG_DRIVER_RALINK */
 #ifdef CONFIG_DRIVER_OSX
     &wpa_driver_osx_ops,
 #endif /* CONFIG_DRIVER_OSX */
 #ifdef CONFIG_DRIVER_IPHONE
     &wpa_driver_iphone_ops,
 #endif /* CONFIG_DRIVER_IPHONE */
 #ifdef CONFIG_DRIVER_ROBOSWITCH
     &wpa_driver_roboswitch_ops,
 #endif /* CONFIG_DRIVER_ROBOSWITCH */
 #ifdef CONFIG_DRIVER_ATHEROS
     &wpa_driver_atheros_ops,
 #endif /* CONFIG_DRIVER_ATHEROS */
 #ifdef CONFIG_DRIVER_NONE
     &wpa_driver_none_ops,
 #endif /* CONFIG_DRIVER_NONE */
     NULL
 };

     具体选择哪一个driver，由wpa_supplicant的命令参数决定，如我的如下：
     在init.myboard.rc中定义：

 service wpa_supplicant /system/bin/wpa_supplicant \
     -Dwext -iwlan0 -c/data/misc/wifi/wpa_supplicant.conf
     #-Dnl80211 -iwlan0 -puse_p2p_group_interface=1 -e/data/misc/wifi/entropy.bin
     #   we will start as root and wpa_supplicant will switch to user wifi
     #   after setting up the capabilities required for WEXT
     #   user wifi
     #   group wifi inet keystore
     class main
     socket wpa_wlan0 dgram 660 wifi wifi
     disabled
     oneshot

     由上可见，我的选择是wext, 即选择了：wpa_driver_wext_ops。具体选择在以下函数中实现，并最后保存在wpa_supplicant->driver中，以供在wpa_drv_scan中使用。

 static int wpa_supplicant_set_driver(struct wpa_supplicant *wpa_s,
                      const char *name)
 {
     int i;
     size_t len;
     const char *pos, *driver = name;

     if (wpa_s == NULL)
         return -1;

        wpa_msg(wpa_s,MSG_ERROR,"***MY_WIFI:%s,name=%s\n",__FUNCTION__,name);

     if (wpa_drivers[0] == NULL) {
         wpa_msg(wpa_s, MSG_ERROR, "No driver interfaces build into "
             "wpa_supplicant");
         return -1;
     }

     if (name == NULL) {
         /* default to first driver in the list */
         wpa_s->driver = wpa_drivers[0];
         wpa_s->global_drv_priv = wpa_s->global->drv_priv[0];
         return 0;
     }

     do {
         pos = os_strchr(driver, ',');
         if (pos)
             len = pos - driver;
         else
             len = os_strlen(driver);

         for (i = 0; wpa_drivers[i]; i++) {
             if (os_strlen(wpa_drivers[i]->name) == len &&
                 os_strncmp(driver, wpa_drivers[i]->name, len) ==
                 0) {
                 wpa_s->driver = wpa_drivers[i];  // 根据name进行匹配，并最后保存到wpa_supplicant->dirver中
                 wpa_s->global_drv_priv =
                     wpa_s->global->drv_priv[i];
                 return 0;
             }
         }

         driver = pos + 1;
     } while (pos);

     wpa_msg(wpa_s, MSG_ERROR, "Unsupported driver '%s'", name);
     return -1;
 }

2. 接口操作函数实现

2.1 用户态实现

    用户态实现的操作函数如下：

    实现代码见：/external/wpa_supplicant_8/wpa_supplicant/src/drivers/driver_wext.c

 const struct wpa_driver_ops wpa_driver_wext_ops = {
     .name = "wext",
     .desc = "Linux wireless extensions (generic)",
     .get_bssid = wpa_driver_wext_get_bssid,
     .get_ssid = wpa_driver_wext_get_ssid,
 #ifdef WAPI
     .set_wapi = wpa_driver_wext_set_wapi,
 #endif
     .set_key = wpa_driver_wext_set_key,
     .set_countermeasures = wpa_driver_wext_set_countermeasures,
     .scan2 = wpa_driver_wext_scan,
     .get_scan_results2 = wpa_driver_wext_get_scan_results,
     .deauthenticate = wpa_driver_wext_deauthenticate,
     .disassociate = wpa_driver_wext_disassociate,
     .associate = wpa_driver_wext_associate,
     .init = wpa_driver_wext_init, // 初始ioctl socket, netlink socket
     .deinit = wpa_driver_wext_deinit,
     .add_pmkid = wpa_driver_wext_add_pmkid,
     .remove_pmkid = wpa_driver_wext_remove_pmkid,
     .flush_pmkid = wpa_driver_wext_flush_pmkid,
     .get_capa = wpa_driver_wext_get_capa,
     .set_operstate = wpa_driver_wext_set_operstate,
     .get_radio_name = wext_get_radio_name,
 #ifdef ANDROID
     .signal_poll = wpa_driver_signal_poll,
     .driver_cmd = wpa_driver_wext_driver_cmd, // 对应驱动中的 cfg80211_wext_setpriv
 #endif
 };

.driver_cmd处理以DRIVER开始的命令，如：

    DRIVER MACADDR

    DRIVER BTCOEXSCAN-STOP

    DRIVER RXFILTER-ADD 3

    DRIVER RXFILTER-START

    DRIVER RXFILTER-STOP

    DRIVER RXFILTER-REMOVE 2

    DRIVER RXFILTER-START

    DRIVER SETBAND 0

    DRIVER SCAN-ACTIVE

    DRIVER SCAN-PASSIVE

   执行流程如下所示：

    wpa_supplicant_ctrl_iface_process-> (根据命令字符串调用对应的函数)

      wpa_supplicant_driver_cmd->

        wpa_drv_driver_cmd->

          wpa_s->driver->driver_cmd->

            wpa_driver_wext_driver_cmd-> (User)

            ...

            cfg80211_wext_setpriv(Kernel)

    

2.2 Kernel态实现      

      Kernel态实现的操作函数如下：

      实现代码见：net/wireless/wext_compat.c

 static const iw_handler cfg80211_handlers[] = {
     [IW_IOCTL_IDX(SIOCGIWNAME)] = (iw_handler) cfg80211_wext_giwname,
     [IW_IOCTL_IDX(SIOCSIWFREQ)] = (iw_handler) cfg80211_wext_siwfreq,
     [IW_IOCTL_IDX(SIOCGIWFREQ)] = (iw_handler) cfg80211_wext_giwfreq,
     [IW_IOCTL_IDX(SIOCSIWMODE)] = (iw_handler) cfg80211_wext_siwmode,
     [IW_IOCTL_IDX(SIOCGIWMODE)] = (iw_handler) cfg80211_wext_giwmode,
     [IW_IOCTL_IDX(SIOCGIWRANGE)]    = (iw_handler) cfg80211_wext_giwrange,
     [IW_IOCTL_IDX(SIOCSIWAP)]   = (iw_handler) cfg80211_wext_siwap,
     [IW_IOCTL_IDX(SIOCGIWAP)]   = (iw_handler) cfg80211_wext_giwap,
     [IW_IOCTL_IDX(SIOCSIWMLME)] = (iw_handler) cfg80211_wext_siwmlme,
     [IW_IOCTL_IDX(SIOCSIWSCAN)] = (iw_handler) cfg80211_wext_siwscan,
     [IW_IOCTL_IDX(SIOCGIWSCAN)] = (iw_handler) cfg80211_wext_giwscan,
     [IW_IOCTL_IDX(SIOCSIWESSID)]    = (iw_handler) cfg80211_wext_siwessid,
     [IW_IOCTL_IDX(SIOCGIWESSID)]    = (iw_handler) cfg80211_wext_giwessid,
     [IW_IOCTL_IDX(SIOCSIWRATE)] = (iw_handler) cfg80211_wext_siwrate,
     [IW_IOCTL_IDX(SIOCGIWRATE)] = (iw_handler) cfg80211_wext_giwrate,
     [IW_IOCTL_IDX(SIOCSIWRTS)]  = (iw_handler) cfg80211_wext_siwrts,
     [IW_IOCTL_IDX(SIOCGIWRTS)]  = (iw_handler) cfg80211_wext_giwrts,
     [IW_IOCTL_IDX(SIOCSIWFRAG)] = (iw_handler) cfg80211_wext_siwfrag,
     [IW_IOCTL_IDX(SIOCGIWFRAG)] = (iw_handler) cfg80211_wext_giwfrag,
     [IW_IOCTL_IDX(SIOCSIWTXPOW)]    = (iw_handler) cfg80211_wext_siwtxpower,
     [IW_IOCTL_IDX(SIOCGIWTXPOW)]    = (iw_handler) cfg80211_wext_giwtxpower,
     [IW_IOCTL_IDX(SIOCSIWRETRY)]    = (iw_handler) cfg80211_wext_siwretry,
     [IW_IOCTL_IDX(SIOCGIWRETRY)]    = (iw_handler) cfg80211_wext_giwretry,
     [IW_IOCTL_IDX(SIOCSIWENCODE)]   = (iw_handler) cfg80211_wext_siwencode,
     [IW_IOCTL_IDX(SIOCGIWENCODE)]   = (iw_handler) cfg80211_wext_giwencode,
     [IW_IOCTL_IDX(SIOCSIWPOWER)]    = (iw_handler) cfg80211_wext_siwpower,
     [IW_IOCTL_IDX(SIOCGIWPOWER)]    = (iw_handler) cfg80211_wext_giwpower,
     [IW_IOCTL_IDX(SIOCSIWGENIE)]    = (iw_handler) cfg80211_wext_siwgenie,
     [IW_IOCTL_IDX(SIOCSIWAUTH)] = (iw_handler) cfg80211_wext_siwauth,
     [IW_IOCTL_IDX(SIOCGIWAUTH)] = (iw_handler) cfg80211_wext_giwauth,
     [IW_IOCTL_IDX(SIOCSIWENCODEEXT)]= (iw_handler) cfg80211_wext_siwencodeext,
     [IW_IOCTL_IDX(SIOCSIWPMKSA)]    = (iw_handler) cfg80211_wext_siwpmksa,
         [IW_IOCTL_IDX(SIOCSIWPRIV)] = (iw_handler)cfg80211_wext_setpriv
 };

 const struct iw_handler_def cfg80211_wext_handler = {
     .num_standard       = ARRAY_SIZE(cfg80211_handlers),
     .standard       = cfg80211_handlers,
     .get_wireless_stats = cfg80211_wireless_stats,
 };

2.3 用户态与Kernel态的交互

      用户态向Kernel态发送请求时，通过ioctl来实现。

      Kernel态向用户态发送事件通知，通过netlink来实现。

     其交互的初始化在wpa_driver_wext_init中实现，其代码如下：

 /**
  * wpa_driver_wext_init - Initialize WE driver interface
  * @ctx: context to be used when calling wpa_supplicant functions,
  * e.g., wpa_supplicant_event()
  * @ifname: interface name, e.g., wlan0
  * Returns: Pointer to private data, %NULL on failure
  */
 void * wpa_driver_wext_init(void *ctx, const char *ifname) // 我的ifname为wlan0
 {
     struct wpa_driver_wext_data *drv;
     struct netlink_config *cfg;
     struct rfkill_config *rcfg;
     char path[128];
     struct stat buf;

         wpa_printf(MSG_ERROR,"***MY_WIFI:%s,ifname=%s\n",__FUNCTION__,ifname);

     drv = os_zalloc(sizeof(*drv));
     if (drv == NULL)
         return NULL;
     drv->ctx = ctx;
     os_strlcpy(drv->ifname, ifname, sizeof(drv->ifname));

     os_snprintf(path, sizeof(path), "/sys/class/net/%s/phy80211", ifname);
     if (stat(path, &buf) == 0) {
         wpa_printf(MSG_DEBUG, "WEXT: cfg80211-based driver detected");
         drv->cfg80211 = 1;
         wext_get_phy_name(drv);
     }

     drv->ioctl_sock = socket(PF_INET, SOCK_DGRAM, 0);  // 此drv->ioctl_sock用作为ioctl命令的fd
     if (drv->ioctl_sock < 0) {
         perror("socket(PF_INET,SOCK_DGRAM)");
         goto err1;
     }

     cfg = os_zalloc(sizeof(*cfg));
     if (cfg == NULL)
         goto err1;
     cfg->ctx = drv;
     cfg->newlink_cb = wpa_driver_wext_event_rtm_newlink;
     cfg->dellink_cb = wpa_driver_wext_event_rtm_dellink;
     drv->netlink = netlink_init(cfg);  // 初始化netlink,并注册事件接收函数
     if (drv->netlink == NULL) {
         os_free(cfg);
         goto err2;
     }

     rcfg = os_zalloc(sizeof(*rcfg));
     if (rcfg == NULL)
         goto err3;
     rcfg->ctx = drv;
     os_strlcpy(rcfg->ifname, ifname, sizeof(rcfg->ifname));
     rcfg->blocked_cb = wpa_driver_wext_rfkill_blocked;
     rcfg->unblocked_cb = wpa_driver_wext_rfkill_unblocked;
     drv->rfkill = rfkill_init(rcfg);
     if (drv->rfkill == NULL) {
         wpa_printf(MSG_DEBUG, "WEXT: RFKILL status not available");
         os_free(rcfg);
     }

     drv->mlme_sock = -1;
 #ifdef ANDROID
     drv->errors = 0;
     drv->driver_is_started = TRUE;
     drv->skip_disconnect = 0;
     drv->bgscan_enabled = 0;
 #endif

     if (wpa_driver_wext_finish_drv_init(drv) < 0)
         goto err3;

     wpa_driver_wext_set_auth_param(drv, IW_AUTH_WPA_ENABLED, 1);

     return drv;

 err3:
     rfkill_deinit(drv->rfkill);
     netlink_deinit(drv->netlink);
 err2:
     close(drv->ioctl_sock);
 err1:
     os_free(drv);
     return NULL;
 }

其中参数ifname在/data/misc/wifi/wpa_supplicant.conf中被定义，如我的如下：

 update_config=1
 ctrl_interface=wlan0
 eapol_version=1
 ap_scan=1
 fast_reauth=1

2.3.1 ioctl实现方案

      在用户态可简单执行一个ioctl(fd,cmd,...)命令即可。

      在Kernel态则是通过唯一的cmd (SIOCIWFIRST--SIOCIWLAST) 来进行区分，从而执行cfg80211_handlers中对应的函数。

      socket文件操作如下：

 /*
  *  Socket files have a set of 'special' operations as well as the generic file ones. These don't appear
  *  in the operation structures but are done directly via the socketcall() multiplexor.
  */

 static const struct file_operations socket_file_ops = {
     .owner =    THIS_MODULE,
     .llseek =   no_llseek,
     .aio_read = sock_aio_read,
     .aio_write =    sock_aio_write,
     .poll =     sock_poll,
     .unlocked_ioctl = sock_ioctl, // 这个就是被执行的ioctl
 #ifdef CONFIG_COMPAT
     .compat_ioctl = compat_sock_ioctl,
 #endif
     .mmap =     sock_mmap,
     .open =     sock_no_open,   /* special open code to disallow open via /proc */
     .release =  sock_close,
     .fasync =   sock_fasync,
     .sendpage = sock_sendpage,
     .splice_write = generic_splice_sendpage,
     .splice_read =  sock_splice_read,
 };

从sock_ioctl到iw_handler的执行注程如下所示：

  sock_ioctl->

    dev_ioctl->

      wext_handle_ioctl-> (把执行结果从kernel态copy到用户态)

        wext_ioctl_dispatch->

          wireless_process_ioctl->

             1) get_handler

             2) ioctl_standard_call (执行cmd指定的iw_handler<cfg80211_handlers中定义的>，并返回结果) 

 static long sock_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 {
     struct socket *sock;
     struct sock *sk;
     void __user *argp = (void __user *)arg;
     int pid, err;
     struct net *net;

     sock = file->private_data;
     sk = sock->sk;
     net = sock_net(sk);
     if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
         err = dev_ioctl(net, cmd, argp);
     } else
 #ifdef CONFIG_WEXT_CORE
     if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) {
         err = dev_ioctl(net, cmd, argp); //执行dev_ioctl
     } else
 #endif
         ...
     }
     return err;
 }

 int dev_ioctl(struct net *net, unsigned int cmd, void __user *arg)
 {
     struct ifreq ifr;
     int ret;
     char *colon;


     /*
      *  See which interface the caller is talking about.
      */

     switch (cmd) {

     /*
      *  Unknown or private ioctl.
      */
     default:
         /* Take care of Wireless Extensions */
         if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST)
             return wext_handle_ioctl(net, &ifr, cmd, arg); // 执行wext_handle_ioctl
         return -ENOTTY;
     }
 }

 int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
               void __user *arg)
 {
     struct iw_request_info info = { .cmd = cmd, .flags = 0 };
     int ret;

     ret = wext_ioctl_dispatch(net, ifr, cmd, &info,  // 执行wext_ioctl_dispatch
                   ioctl_standard_call,
                   ioctl_private_call);
     if (ret >= 0 &&
         IW_IS_GET(cmd) &&
         copy_to_user(arg, ifr, sizeof(struct iwreq))) // 把执行结果copy到用户空间
         return -EFAULT;

     return ret;
 }

 /* entry point from dev ioctl */
 static int wext_ioctl_dispatch(struct net *net, struct ifreq *ifr,
                    unsigned int cmd, struct iw_request_info *info,
                    wext_ioctl_func standard,
                    wext_ioctl_func private)
 {
     int ret = wext_permission_check(cmd);

     if (ret)
         return ret;

     dev_load(net, ifr->ifr_name);
     rtnl_lock();
     ret = wireless_process_ioctl(net, ifr, cmd, info, standard, private); //执行wireless_process_ioctl

     rtnl_unlock();

     return ret;
 }

 static iw_handler get_handler(struct net_device *dev, unsigned int cmd)
 {
     /* Don't "optimise" the following variable, it will crash */
     unsigned int    index;      /* *MUST* be unsigned */
     const struct iw_handler_def *handlers = NULL;
     //printk("***IDONG_WIFI:%s,cmd=0x%x\n",__FUNCTION__,cmd);
 #ifdef CONFIG_CFG80211_WEXT
     if (dev->ieee80211_ptr && dev->ieee80211_ptr->wiphy)
         handlers = dev->ieee80211_ptr->wiphy->wext;
 #endif
 #ifdef CONFIG_WIRELESS_EXT
     if (dev->wireless_handlers)
         handlers = dev->wireless_handlers;
 #endif

     if (!handlers)
         return NULL;

     /* Try as a standard command */
     index = IW_IOCTL_IDX(cmd);
     if (index < handlers->num_standard)
         return handlers->standard[index];

 #ifdef CONFIG_WEXT_PRIV
     /* Try as a private command */
     index = cmd - SIOCIWFIRSTPRIV;
     if (index < handlers->num_private)
         return handlers->private[index];
 #endif

     /* Not found */
     return NULL;
 }

 static int wireless_process_ioctl(struct net *net, struct ifreq *ifr,
                   unsigned int cmd,
                   struct iw_request_info *info,
                   wext_ioctl_func standard,
                   wext_ioctl_func private)
 {
     struct iwreq *iwr = (struct iwreq *) ifr;
     struct net_device *dev;
     iw_handler  handler;

     /* Permissions are already checked in dev_ioctl() before calling us.
      * The copy_to/from_user() of ifr is also dealt with in there */

     /* Make sure the device exist */
     if ((dev = __dev_get_by_name(net, ifr->ifr_name)) == NULL)
         return -ENODEV;

     /* A bunch of special cases, then the generic case...
      * Note that 'cmd' is already filtered in dev_ioctl() with
      * (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) */
     if (cmd == SIOCGIWSTATS)
         return standard(dev, iwr, cmd, info,
                 &iw_handler_get_iwstats);

 #ifdef CONFIG_WEXT_PRIV
     if (cmd == SIOCGIWPRIV && dev->wireless_handlers)
         return standard(dev, iwr, cmd, info,
                 iw_handler_get_private);
 #endif

     /* Basic check */
     if (!netif_device_present(dev))
         return -ENODEV;

     /* New driver API : try to find the handler */
     handler = get_handler(dev, cmd);
     if (handler) {
         /* Standard and private are not the same */
         if (cmd < SIOCIWFIRSTPRIV)
             return standard(dev, iwr, cmd, info, handler); // 去执行对应的iw_handler
         else if (private)
             return private(dev, iwr, cmd, info, handler);
     }
     /* Old driver API : call driver ioctl handler */
     if (dev->netdev_ops->ndo_do_ioctl)
         return dev->netdev_ops->ndo_do_ioctl(dev, ifr, cmd);
     return -EOPNOTSUPP;
 }

2.3.2 用户态初始化netlink

 struct netlink_data * netlink_init(struct netlink_config *cfg)
 {
     struct netlink_data *netlink;
     struct sockaddr_nl local;

     netlink = os_zalloc(sizeof(*netlink));
     if (netlink == NULL)
         return NULL;

     netlink->cfg = cfg;

     netlink->sock = socket(PF_NETLINK, SOCK_RAW, NETLINK_ROUTE);
     if (netlink->sock < 0) {
         wpa_printf(MSG_ERROR, "netlink: Failed to open netlink "
                "socket: %s", strerror(errno));
         netlink_deinit(netlink);
         return NULL;
     }

     os_memset(&local, 0, sizeof(local));
     local.nl_family = AF_NETLINK;
     local.nl_groups = RTMGRP_LINK;
     if (bind(netlink->sock, (struct sockaddr *) &local, sizeof(local)) < 0)
     {
         wpa_printf(MSG_ERROR, "netlink: Failed to bind netlink "
                "socket: %s", strerror(errno));
         netlink_deinit(netlink);
         return NULL;
     }

     eloop_register_read_sock(netlink->sock, netlink_receive, netlink,
                  NULL);

     return netlink;
 }

2.3.3 用户态netlink事件接收函数netlink_receive

 static void netlink_receive(int sock, void *eloop_ctx, void *sock_ctx)
 {
     struct netlink_data *netlink = eloop_ctx;
     char buf[8192];
     int left;
     struct sockaddr_nl from;
     socklen_t fromlen;
     struct nlmsghdr *h;
     int max_events = 10;

 try_again:
     fromlen = sizeof(from);
     left = recvfrom(sock, buf, sizeof(buf), MSG_DONTWAIT, //从netlink读取事件
             (struct sockaddr *) &from, &fromlen);
     if (left < 0) {
         if (errno != EINTR && errno != EAGAIN)
             wpa_printf(MSG_INFO, "netlink: recvfrom failed: %s",
                    strerror(errno));
         return;
     }

     h = (struct nlmsghdr *) buf;
     while (NLMSG_OK(h, left)) {
         switch (h->nlmsg_type) {
         case RTM_NEWLINK:
             netlink_receive_link(netlink, netlink->cfg->newlink_cb,
                          h);
             break;
         case RTM_DELLINK:
             netlink_receive_link(netlink, netlink->cfg->dellink_cb,
                          h);
             break;
         }

         h = NLMSG_NEXT(h, left);
     }

     if (left > 0) {
         wpa_printf(MSG_DEBUG, "netlink: %d extra bytes in the end of "
                "netlink message", left);
     }

     if (--max_events > 0) {
         /*
          * Try to receive all events in one eloop call in order to
          * limit race condition on cases where AssocInfo event, Assoc
          * event, and EAPOL frames are received more or less at the
          * same time. We want to process the event messages first
          * before starting EAPOL processing.
          */
         goto try_again;
     }
 }

3. SCAN流程

wpa_supplicant_ctrl_iface_process-> ( buf 内容为SCAN )

  wpa_supplicant_req_scan->

    wpa_supplicant_scan->

      wpa_supplicant_trigger_scan->

        wpa_drv_scan->

          wpa_s->driver->scan2->

            wpa_driver_wext_scan-> (Request the driver to initiate scan)      

              wpa_driver_wext_combo_scan->

                ioctl(drv->ioctl_sock, SIOCSIWPRIV, &iwr)-> (User)

                ...

                cfg80211_wext_setpriv (cmd=CSCAN S)->

                  cfg80211_wext_siwscan->

                   rdev->ops->scan (cfg80211_ops mac80211_config_ops->scan)->

                    ieee80211_scan->

                     ieee80211_request_scan->

                      __ieee80211_start_scan->

                       ieee80211_start_sw_scan->

                         <1> drv_sw_scan_start->

                                  local->ops->sw_scan_start(ieee80211_ops ath9k_htc_ops->sw_scan_start)->

                                    ath9k_htc_sw_scan_start->

                         <2> ieee80211_hw_config-> (set power level at maximum rate for scanning)

                                 drv_config->  

                                   local->ops->config( ieee80211_ops ath9k_htc_ops->config)->  

                                      ath9k_htc_config->

                                        ath9k_htc_setpower(priv,ATH9K_PM_AWAKE)                     

                         <3>  ieee80211_queue_delayed_work(&local->scan_work)->

                                 (注：INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work))

                                   ieee80211_scan_work-> (根据local当前状态进行下一步工作，直到工作完成)

                                    __ieee80211_scan_completed-> (所有扫描的工作完成之后，调用此函数)

                                     drv_sw_scan_complete->

                                        local->ops->sw_scan_complete( ieee80211_ops ath9k_htc_ops->sw_scan_complete)

                                          ath9k_htc_sw_scan_complete

                                           

• ieee80211_scan_work函数详细代码如下:                                      

 void ieee80211_scan_work(struct work_struct *work)
 {
     struct ieee80211_local *local =
         container_of(work, struct ieee80211_local, scan_work.work);
     struct ieee80211_sub_if_data *sdata;
     unsigned long next_delay = 0;
     bool aborted, hw_scan;

     mutex_lock(&local->mtx);

     sdata = local->scan_sdata;

     if (test_and_clear_bit(SCAN_COMPLETED, &local->scanning)) {
         aborted = test_and_clear_bit(SCAN_ABORTED, &local->scanning);
         goto out_complete;
     }

     if (!sdata || !local->scan_req)
         goto out;

     if (local->scan_req && !local->scanning) {
         struct cfg80211_scan_request *req = local->scan_req;
         int rc;

         local->scan_req = NULL;
         local->scan_sdata = NULL;

         rc = __ieee80211_start_scan(sdata, req);
         if (rc) {
             /* need to complete scan in cfg80211 */
             local->scan_req = req;
             aborted = true;
             goto out_complete;
         } else
             goto out;
     }

     /*
      * Avoid re-scheduling when the sdata is going away.
      */
     if (!ieee80211_sdata_running(sdata)) {
         aborted = true;
         goto out_complete;
     }

     /*
      * as long as no delay is required advance immediately
      * without scheduling a new work
      */
     do {
         if (!ieee80211_sdata_running(sdata)) {
             aborted = true;
             goto out_complete;
         }

         switch (local->next_scan_state) {
         case SCAN_DECISION:
             /* if no more bands/channels left, complete scan */
             if (local->scan_channel_idx >= local->scan_req->n_channels) {
                 aborted = false;
                 goto out_complete;
             }
             ieee80211_scan_state_decision(local, &next_delay);
             break;
         case SCAN_SET_CHANNEL:
             ieee80211_scan_state_set_channel(local, &next_delay);
             break;
         case SCAN_SEND_PROBE:
             ieee80211_scan_state_send_probe(local, &next_delay);
             break;
         case SCAN_LEAVE_OPER_CHANNEL:
             ieee80211_scan_state_leave_oper_channel(local, &next_delay);
             break;
         case SCAN_ENTER_OPER_CHANNEL:
             ieee80211_scan_state_enter_oper_channel(local, &next_delay);
             break;
         }
     } while (next_delay == 0);

     ieee80211_queue_delayed_work(&local->hw, &local->scan_work, next_delay);
     goto out;

 out_complete:
     hw_scan = test_bit(SCAN_HW_SCANNING, &local->scanning);
     __ieee80211_scan_completed(&local->hw, aborted, hw_scan);
 out:
     mutex_unlock(&local->mtx);
 }