Windows Server 2016 NTP Client

[1]

Right-click [Start] button and open [run] and input [gpedit.msc] like follows.

[2]	Select [Administrative Templates] - [System] - [Windows Time Service] - [Time Providers] on the left pane, and Open [Enable Windows NTP Client] on the right pane.

[3]	Check a box [Enabled] which is upper-left like follows.

[4]	Click to open [Configure Windows NTP Client] on the right pane.

[5]

Check a box [Enabled] which is upper-left and change values for your environment. [NtpServer] ⇒ Hostname or IP address of your NTP Server. The value [0x9] is generally OK to keep default. [0x9] means [0x01] + [0x08]. They mean like follows.   0x01 SpecialInterval   0x02 UseAsFallbackOnly   0x04 SymmetricActive   0x08 NTP request in Client mode For [Type] section, It's OK to keep default [NT5DS] if your computer is in a Domain, but if not, change to [NTP]. For [SpecialPollInterval], set interval to sync time.

[6]	Open [Server Manager] - [Tools] - [Services].

[7]	Select [Windows Time] Service and click [Start the service] or [Restart the service]. Furthermore, Change [Startup type] to [Automatic] if it is not the value.