SMS短信的PDU编码规则

  目前,发送短消息常用Text和PDU(Protocol Data Unit,协议数据单元)模式。使用Text模式收发短信代码简单,实现起来十分容易,但最大的缺点是不能收发中文短信;而PDU模式不仅支持中文短信,也能发送英文短信。PDU模式收发短信可以使用3种编码:7-bit、8-bit和UCS2编码。7-bit编码用于发送普通的ASCII字符,8-bit编码通常用于发送数据消息,UCS2编码用于发送Unicode字符。一般的PDU编码由A B C D E F G H I J K L M十三项组成。

A:短信息中心地址长度,2位十六进制数(1字节)。
B:短信息中心号码类型,2位十六进制数。
C:短信息中心号码,B+C的长度将由A中的数据决定。
D:文件头字节,2位十六进制数。
E:信息类型,2位十六进制数。
F:被叫号码长度,2位十六进制数。
G:被叫号码类型,2位十六进制数,取值同B。
H:被叫号码,长度由F中的数据决定。
I:协议标识,2位十六进制数。
J:数据编码方案,2位十六进制数。
K:有效期,2位十六进制数。
L:用户数据长度,2位十六进制数。
M:用户数据,其长度由L中的数据决定。J中设定采用UCS2编码,这里是中英文的Unicode字符。

PDU编码协议简单说明

例1 发送:SMSC号码是+8613800250500,对方号码是13693092030,消息内容是“Hello!”。从手机发出的PDU串可以是
08 91 68 31 08 20 05 05 F0 11 00 0D 91 68 31 96 03 29 30 F0 00 00 00 06 C8 32 9B FD 0E 01
对照规范,具体分析:
分段 含义 说明
08 SMSC地址信息的长度 共8个八位字节(包括91)
91 SMSC地址格式(TON/NPI) 用国际格式号码(在前面加‘+’)
68 31 08 20 05 05 F0 SMSC地址 8613800250500,补‘F’凑成偶数个
11 基本参数(TP-MTI/VFP) 发送,TP-VP用相对格式
00 消息基准值(TP-MR) 0
0D 目标地址数字个数 共13个十进制数(不包括91和‘F’)
91 目标地址格式(TON/NPI) 用国际格式号码(在前面加‘+’)
68 31 96 03 29 30 F0 目标地址(TP-DA) 8613693092030,补‘F’凑成偶数个
00 协议标识(TP-PID) 是普通GSM类型,点到点方式
00 用户信息编码方式(TP-DCS) 7-bit编码
00 有效期(TP-VP) 5分钟
06 用户信息长度(TP-UDL) 实际长度6个字节
C8 32 9B FD 0E 01 用户信息(TP-UD) “Hello!”

例2 接收:SMSC号码是+8613800250500,对方号码是13693092030,消息内容是“你好!”。手机接收到的PDU串可以是
08 91 68 31 08 20 05 05 F0 84 0D 91 68 31 96 03 29 30 F0 00 08 30 30 21 80 63 54 80 06 4F 60 59 7D 00 21
对照规范,具体分析:
分段 含义 说明
08 地址信息的长度 个八位字节(包括91)
91 SMSC地址格式(TON/NPI) 用国际格式号码(在前面加‘+’)
68 31 08 20 05 05 F0 SMSC地址 8613800250500,补‘F’凑成偶数个
84 基本参数(TP-MTI/MMS/RP) 接收,无更多消息,有回复地址
0D 回复地址数字个数 共13个十进制数(不包括91和‘F’)
91 回复地址格式(TON/NPI) 用国际格式号码(在前面加‘+’)
68 31 96 03 29 30 F0 回复地址(TP-RA) 8613693092030,补‘F’凑成偶数个
00 协议标识(TP-PID) 是普通GSM类型,点到点方式
08 用户信息编码方式(TP-DCS) UCS2编码
30 30 21 80 63 54 80 时间戳(TP-SCTS) 2003-3-12 08:36:45  +8时区
06 用户信息长度(TP-UDL) 实际长度6个字节
4F 60 59 7D 00 21 用户信息(TP-UD) “你好!”


若基本参数的最高位(TP-RP)为0,则没有回复地址的三个段。从Internet上发出的短消息常常是这种情形。
注意号码和时间的表示方法,不是按正常顺序顺着来的,而且要以‘F’将奇数补成偶数。


在PDU Mode中,可以采用三种编码方式来对发送的内容进行编码,它们是7-bit、8-bit和UCS2编码。7-bit编码用于发送普通的ASCII字符,它将一串7-bit的字符(最高位为0)编码成8-bit的数据,每8个字符可“压缩”成7个;8-bit编码通常用于发送数据消息,比如图片和铃声等;而UCS2编码用于发送Unicode字符。PDU串的用户信息(TP-UD)段最大容量是140字节,所以在这三种编码方式下,可以发送的短消息的最大字符数分别是160、140和70。这里,将一个英文字母、一个汉字和一个数据字节都视为一个字符。


需要注意的是,PDU串的用户信息长度(TP-UDL),在各种编码方式下意义有所不同。7-bit编码时,指原始短消息的字符个数,而不是编码后的字节数。8-bit编码时,就是字节数。UCS2编码时,也是字节数,等于原始短消息的字符数的两倍。如果用户信息(TP-UD)中存在一个头(基本参数的TP-UDHI为1),在所有编码方式下,用户信息长度(TP-UDL)都等于头长度与编码后字节数之和。如果采用GSM 03.42所建议的压缩算法(TP-DCS的高3位为001),则该长度也是压缩编码后字节数或头长度与压缩编码后字节数之和。

2 参见详细英文说明:http://www.dreamfabric.com/sms/

3 delphi代码
{ ---------------------------------------------------------      }
{ Purposes :                                                     }
{      1. Convert ASCII to 7-bit PDU                             }
{      2. Convert 7-bit, 8-bit and 16-bit PDU to ASCII           }
{      3. Decode/Parsing the hexadecimal (PDU) of SMS message    }
{      4. Encode ASCII characters to be sent as SMS ready string }
{                                                                }
{ ---------------------------------------------------------      }
{ Coder   : Daniel Eka Nugraha                                   }
{ URL     : http://www.averagecoder.com/                         }
{ Email   : [email protected]                                     }
{ ---------------------------------------------------------      }
{ This is not a perfect one, so Use it at your own risk !        }
{ ---------------------------------------------------------      }

unit SMSCODEC;

interface

uses
  Windows, Messages, SysUtils, Classes, StrUtils, Math, Dialogs;

type
  TSMSCODEC = class(TComponent)
  private
    { Private declarations }
  protected
    { Protected declarations }
  public
    constructor Create(AOwner: TComponent); override;
    destructor Destroy; override;
    function Binerkan(Angka: integer): string;
    function Bin2Long(StrBiner: string): integer;
    function PDU7BIT2ASCII(StrPDU: string; PanjangUDH, PanjangData: integer): string;
    function PDU8BIT2ASCII(StrPDU: string; PanjangUDH, PanjangData: integer): string;
    function PDU16BIT2ASCII(StrPDU: string; PanjangUDH, PanjangData: integer): string;
    function ASCII2PDU7BIT(StrASCII: string): string;
    function DecodeSMS(StrSMS : string) : TStringList;
    function EncodeSMS(StrTujuan, StrPesan: string): string;
  published
    { Published declarations }
  end;

procedure Register;

implementation

var Nono: integer;
    EQ7BIT2ASCII : array [0..127] of integer;  // Table persamaan 7-bit ke ASCII
    EQASCII27BIT : array [0..255] of integer;  // Table persamaan ASCII ke 7-bit

procedure Register;
begin
  RegisterComponents('averagecoder', [TSMSCODEC]);
end;

constructor TSMSCODEC.Create(AOwner: TComponent);
var i : integer;
begin
   inherited Create(AOwner);

   // This is the transition table from 7-bit to ASCII

   Nono := -1;

   EQ7BIT2ASCII[0]  := 64;
   EQ7BIT2ASCII[1]  := 163;
   EQ7BIT2ASCII[2]  := 36;
   EQ7BIT2ASCII[3]  := 165;
   EQ7BIT2ASCII[4]  := 232;
   EQ7BIT2ASCII[5]  := 223;
   EQ7BIT2ASCII[6]  := 249;
   EQ7BIT2ASCII[7]  := 236;
   EQ7BIT2ASCII[8]  := 242;
   EQ7BIT2ASCII[9]  := 199;
   EQ7BIT2ASCII[10] := 10;
   EQ7BIT2ASCII[11] := 216;
   EQ7BIT2ASCII[12] := 248;
   EQ7BIT2ASCII[13] := 13;
   EQ7BIT2ASCII[14] := 197;
   EQ7BIT2ASCII[15] := 229;
   EQ7BIT2ASCII[16] := Nono;
   EQ7BIT2ASCII[17] := 95;
   EQ7BIT2ASCII[18] := Nono;
   EQ7BIT2ASCII[19] := Nono;
   EQ7BIT2ASCII[20] := Nono;
   EQ7BIT2ASCII[21] := Nono;
   EQ7BIT2ASCII[22] := Nono;
   EQ7BIT2ASCII[23] := Nono;
   EQ7BIT2ASCII[24] := Nono;
   EQ7BIT2ASCII[25] := Nono;
   EQ7BIT2ASCII[26] := Nono;
   EQ7BIT2ASCII[27] := Nono;
   EQ7BIT2ASCII[28] := 198;
   EQ7BIT2ASCII[29] := 230;
   EQ7BIT2ASCII[30] := 223;
   EQ7BIT2ASCII[31] := 201;
   EQ7BIT2ASCII[32] := 32;
   EQ7BIT2ASCII[33] := 33;
   EQ7BIT2ASCII[34] := 34;
   EQ7BIT2ASCII[35] := 35;
   EQ7BIT2ASCII[36] := 164;
   EQ7BIT2ASCII[37] := 37;
   EQ7BIT2ASCII[38] := 38;
   EQ7BIT2ASCII[39] := 39;
   EQ7BIT2ASCII[40] := 40;
   EQ7BIT2ASCII[41] := 41;
   EQ7BIT2ASCII[42] := 42;
   EQ7BIT2ASCII[43] := 43;
   EQ7BIT2ASCII[44] := 44;
   EQ7BIT2ASCII[45] := 45;
   EQ7BIT2ASCII[46] := 46;
   EQ7BIT2ASCII[47] := 47;
   EQ7BIT2ASCII[48] := 48;
   EQ7BIT2ASCII[49] := 49;
   EQ7BIT2ASCII[50] := 50;
   EQ7BIT2ASCII[51] := 51;
   EQ7BIT2ASCII[52] := 52;
   EQ7BIT2ASCII[53] := 53;
   EQ7BIT2ASCII[54] := 54;
   EQ7BIT2ASCII[55] := 55;
   EQ7BIT2ASCII[56] := 56;
   EQ7BIT2ASCII[57] := 57;
   EQ7BIT2ASCII[58] := 58;
   EQ7BIT2ASCII[59] := 59;
   EQ7BIT2ASCII[60] := 60;
   EQ7BIT2ASCII[61] := 61;
   EQ7BIT2ASCII[62] := 62;
   EQ7BIT2ASCII[63] := 63;
   EQ7BIT2ASCII[64] := 161;
   EQ7BIT2ASCII[65] := 65;
   EQ7BIT2ASCII[66] := 66;
   EQ7BIT2ASCII[67] := 67;
   EQ7BIT2ASCII[68] := 68;
   EQ7BIT2ASCII[69] := 69;
   EQ7BIT2ASCII[70] := 70;
   EQ7BIT2ASCII[71] := 71;
   EQ7BIT2ASCII[72] := 72;
   EQ7BIT2ASCII[73] := 73;
   EQ7BIT2ASCII[74] := 74;
   EQ7BIT2ASCII[75] := 75;
   EQ7BIT2ASCII[76] := 76;
   EQ7BIT2ASCII[77] := 77;
   EQ7BIT2ASCII[78] := 78;
   EQ7BIT2ASCII[79] := 79;
   EQ7BIT2ASCII[80] := 80;
   EQ7BIT2ASCII[81] := 81;
   EQ7BIT2ASCII[82] := 82;
   EQ7BIT2ASCII[83] := 83;
   EQ7BIT2ASCII[84] := 84;
   EQ7BIT2ASCII[85] := 85;
   EQ7BIT2ASCII[86] := 86;
   EQ7BIT2ASCII[87] := 87;
   EQ7BIT2ASCII[88] := 88;
   EQ7BIT2ASCII[89] := 89;
   EQ7BIT2ASCII[90] := 90;
   EQ7BIT2ASCII[91] := 196;
   EQ7BIT2ASCII[92] := 204;
   EQ7BIT2ASCII[93] := 209;
   EQ7BIT2ASCII[94] := 220;
   EQ7BIT2ASCII[95] := 167;
   EQ7BIT2ASCII[96] := 191;
   EQ7BIT2ASCII[97] := 97;
   EQ7BIT2ASCII[98] := 98;
   EQ7BIT2ASCII[99] := 99;
   EQ7BIT2ASCII[100] := 100;
   EQ7BIT2ASCII[101] := 101;
   EQ7BIT2ASCII[102] := 102;
   EQ7BIT2ASCII[103] := 103;
   EQ7BIT2ASCII[104] := 104;
   EQ7BIT2ASCII[105] := 105;
   EQ7BIT2ASCII[106] := 106;
   EQ7BIT2ASCII[107] := 107;
   EQ7BIT2ASCII[108] := 108;
   EQ7BIT2ASCII[109] := 109;
   EQ7BIT2ASCII[110] := 110;
   EQ7BIT2ASCII[111] := 111;
   EQ7BIT2ASCII[112] := 112;
   EQ7BIT2ASCII[113] := 113;
   EQ7BIT2ASCII[114] := 114;
   EQ7BIT2ASCII[115] := 115;
   EQ7BIT2ASCII[116] := 116;
   EQ7BIT2ASCII[117] := 117;
   EQ7BIT2ASCII[118] := 118;
   EQ7BIT2ASCII[119] := 119;
   EQ7BIT2ASCII[120] := 120;
   EQ7BIT2ASCII[121] := 121;
   EQ7BIT2ASCII[122] := 122;
   EQ7BIT2ASCII[123] := 228;
   EQ7BIT2ASCII[124] := 246;
   EQ7BIT2ASCII[125] := 241;
   EQ7BIT2ASCII[126] := 252;
   EQ7BIT2ASCII[127] := 224;

   // This is the transition table from ASCII to 7-BIT; index reversing :)

   for i := 0 to High(EQ7BIT2ASCII) do
   begin
       if EQ7BIT2ASCII[i] <> Nono then
          EQASCII27BIT[EQ7BIT2ASCII[i]] := i;
   end;
end; { TSMSCODEC.Create }


destructor TSMSCODEC.Destroy;
begin
  inherited Destroy;
end; { TSMSCODEC.Destroy }

 

{

--------------------------------------------------------------------------------
  function Binerkan

  -> Convert integer to binary
 
  -> parameters:
     Angka: integer; -> the integer value

  -> Return value: string of 1 and 0 (nothing genius at all :D)
--------------------------------------------------------------------------------

}

function TSMSCODEC.Binerkan(Angka : integer): string;
var i : Integer;
    hasil : array [0..7] of Integer;
    SISA : array [0..7] of Integer;
    StrHasil : string;
begin
    result := '';

    if angka > 1 Then
    begin
        i := 1;
        repeat
            hasil[i] := Trunc(angka / 2);
            SISA[i] := angka mod 2;
            angka := hasil[i];
            i := i + 1;
            StrHasil := IntToStr(SISA[i - 1]) + StrHasil;
        until hasil[i - 1] < 2;
        StrHasil := IntToStr(hasil[i - 1]) + StrHasil;
    end
    else if angka = 1 then
        StrHasil := '00000001'
    else if angka = 0 Then
        StrHasil := '00000000';

    for i := 1 to (8 - Length(StrHasil)) do
        StrHasil := '0' + StrHasil;

    result := StrHasil;
end;  { TSMSCODEC.Binerkan }


{

--------------------------------------------------------------------------------
  function Bin2Long

  -> Convert binaty string to integer
  -> Parameter:
     StrBiner: string; -> the binary string;

  -> Return value: integer;
--------------------------------------------------------------------------------

}

function TSMSCODEC.Bin2Long(StrBiner : string): integer;
var i, x : integer;
begin
    x := 0;
    for i := 1 to Length(StrBiner) do
    begin
       x := x + StrToInt(Copy(StrBiner, i, 1)) * Trunc(Power(2,(Length(StrBiner) - i)));
    end;
    result := x;
end; { TSMSCODEC.Bin2Long }

 

{

--------------------------------------------------------------------------------
  function PDU7BIT2ASCII

  -> Convert PDU (string 7-bit PDU) to ASCII
  -> Parameter:
     StrPDU: string -> the PDUString
     PanjangUDH: integer; -> the length of the UDH
     PanjangData: integer; -> the length of the data

  -> return value: ASCII string
--------------------------------------------------------------------------------

}

function TSMSCODEC.PDU7BIT2ASCII(StrPDU : string; PanjangUDH, PanjangData: integer) : string;
var i,j,x,z : integer;
    y, StrASCII : string;
    ArrPDU   : array of string;
    Arr7Bit  : array of string;
    ArrASCII : array of string;
begin
    j := 1;
    z := 0;

    // 2 PDU chars represent 1 ASCII chars, so the length of the
    // ASCII chars sequence is 1/2 of the string PDU length
    SetLength(ArrPDU,Length(StrPDU) div 2);

    // Load each pair of PDU string to the appropriate index of ArrPDU
    while j < Length(StrPDU) do
    begin
       ArrPDU[z] := '$' + Copy(StrPDU,j,2); // '$' + string = hexadecimal
       j := j + 2;
       Inc(z);
    end;

    // Convert each ArrPDU item to binary for decoding
    for i := 0 to High(ArrPDU) do
    begin
        y := ArrPDU[i];  
        ArrPDU[i] := ''; 
        ArrPDU[i] := Binerkan(StrToInt(y));
    end;

    x := 0;

    SetLength(Arr7BIT,x+1);

    // The core process - the bit mutation
    for i := 0 to High(ArrPDU) do
    begin
        if i mod 7 = 0 then
        begin
           Arr7BIT[x] := RightStr(ArrPDU[i],7);
        end
        else
        begin
           if i mod 7 = 6 then
           begin
              Arr7BIT[x] := RightStr(ArrPDU[i],1) + LeftStr(ArrPDU[i-1],6);
              x := x + 1;
              SetLength(Arr7BIT,x+1);
              Arr7BIT[x] := LeftStr(ArrPDU[i],7);
           end
           else
              Arr7BIT[x] := RightStr(ArrPDU[i],Length(ArrPDU[i])-(i mod 7)-1) + LeftStr(ArrPDU[i-1],i mod 7);
        end;
        x := x + 1;
        SetLength(Arr7BIT,x+1);
    end; { for }

    j := 0;

    while j <= High(Arr7BIT) do
    begin
        SetLength(ArrASCII,Length(ArrASCII)+1);

        if Bin2Long(Arr7BIT[j]) = 27 then
        begin
           inc(j);
           case Bin2Long(Arr7BIT[j]) of
                10 : ArrASCII[High(ArrASCII)] := Chr(12);
                20 : ArrASCII[High(ArrASCII)] := Chr(94);
                40 : ArrASCII[High(ArrASCII)] := Chr(123);
                41 : ArrASCII[High(ArrASCII)] := Chr(125);
                47 : ArrASCII[High(ArrASCII)] := Chr(92);
                60 : ArrASCII[High(ArrASCII)] := Chr(91);
                61 : ArrASCII[High(ArrASCII)] := Chr(126);
                62 : ArrASCII[High(ArrASCII)] := Chr(93);
                64 : ArrASCII[High(ArrASCII)] := Chr(124);
           else
                ArrASCII[High(ArrASCII)] := Chr(0);
           end;
        end
        else
        begin
           ArrASCII[High(ArrASCII)] := Chr(EQ7BIT2ASCII[Bin2Long(Arr7BIT[j])]);
        end;
        Inc(j);
    end; { while }

    SetLength(ArrASCII,PanjangData);

    for i := 0 to High(ArrASCII) do
        StrASCII := StrASCII + (ArrASCII[i]);

    ArrPDU   := nil; Arr7Bit  := nil; ArrASCII := nil;

    // if no UDH, ignore the octet info of UDH length,
    // not part of SMS message.
    if PanjangUDH > 0 then
       StrASCII := Copy(StrASCII,PanjangUDH + 3,Length(StrASCII));

    Result := StrASCII;
end; { TSMSCODEC.PDU7BIT2ASCII }

 

{

--------------------------------------------------------------------------------
  function PDU8BIT2ASCII

  -> Convert string 8-bit PDU to ASCII
  -> parameter:
     strPDU: string; -> the 8 bit PDU string
     PanjangUDH: integer; -> length of the UDH
     PanjangData: integer; -> Length of the data

  -> return value: string (ASCII)
--------------------------------------------------------------------------------

}

function TSMSCODEC.PDU8BIT2ASCII(StrPDU : string; PanjangUDH, PanjangData: integer) : string;
var StrASCII : string;
    i, x, PjPDUPesan : integer;
begin
    if PanjangUDH <> 0 then
    begin
       x := (PanjangUDH * 2) + 2; // PDU info UDH
       StrPDU := RightStr(StrPDU,(PanjangData * 2) - x); // PDU Pesan
    end;

    PjPDUPesan := Length(StrPDU);

    i := 1;

    while i <= PjPDUPesan do
    begin
       if i mod 2 = 0 then
       begin
          StrASCII := StrASCII + Chr(EQ7BIT2ASCII[StrToInt('$' + LeftStr(StrPDU,2))]);
          StrPDU := RightStr(StrPDU,Length(StrPDU)-2);
       end;
       Inc(i);
    end;
    result := StrASCII;
end; { TSMSCODEC.PDU8BIT2ASCII }

 

{

--------------------------------------------------------------------------------
  function PDU16BIT2ASCII

  -> COnvert StrPDU (string 16-bit PDU) to ASCII
  -> parameter:
     strPDU: string; -> the 8 bit PDU string
     PanjangUDH: integer; -> length of the UDH
     PanjangData: integer; -> Length of the data
 

  -> Return value: string (ASCII)
--------------------------------------------------------------------------------

}

function TSMSCODEC.PDU16BIT2ASCII(StrPDU : string; PanjangUDH, PanjangData: integer) : string;
var StrASCII : string;
    i, x, PjPDUPesan : integer;
begin
    if PanjangUDH <> 0 then
    begin
       x := (PanjangUDH * 2) + 2;
       StrPDU := RightStr(StrPDU,(PanjangData * 2) - x);
    end;

    PjPDUPesan := Length(StrPDU);

    i := 1;

    while i <= PjPDUPesan do
    begin
       if i mod 4 = 0 then
       begin
          StrASCII := StrASCII + Chr(EQ7BIT2ASCII[StrToInt('$' + LeftStr(StrPDU,4))]);
          StrPDU := RightStr(StrPDU,Length(StrPDU)-4);
       end;
       Inc(i);
    end;
    result := StrASCII;
end; { TSMSCODEC.PDU16BIT2ASCII }

 

{

--------------------------------------------------------------------------------
  function ASCII2PDU7BIT

  -> Convert par StrASCII (string ASCII) to 7-bit PDU
  -> parameter:
     strASCII: string; -> the ASCII string

  -> Return value: string (7-bit PDU)
--------------------------------------------------------------------------------

}

function TSMSCODEC.ASCII2PDU7BIT(StrASCII : string) : string;
var i,x,z : integer;
    ArrPDU   : array of string;
    Arr7Bit  : array of string;
    StrPDU  : string;
begin
   
    for i := 1 to Length(StrASCII) do
    begin
        SetLength(Arr7BIT,Length(Arr7BIT)+1);
        case Ord(StrASCII[i]) of
             12 : begin
                    SetLength(Arr7BIT,Length(Arr7BIT)+1);
                    Arr7BIT[High(Arr7BIT)-1] := RightStr(Binerkan(27),7);
                    Arr7BIT[High(Arr7BIT)] := RightStr(Binerkan(10),7);
                  end;
             94 : begin
                    SetLength(Arr7BIT,Length(Arr7BIT)+1);
                    Arr7BIT[High(Arr7BIT)-1] := RightStr(Binerkan(27),7);
                    Arr7BIT[High(Arr7BIT)] := RightStr(Binerkan(20),7);
                  end;
            123 : begin
                    SetLength(Arr7BIT,Length(Arr7BIT)+1);
                    Arr7BIT[High(Arr7BIT)-1] := RightStr(Binerkan(27),7);
                    Arr7BIT[High(Arr7BIT)] := RightStr(Binerkan(40),7);
                  end;
            125 : begin
                    SetLength(Arr7BIT,Length(Arr7BIT)+1);
                    Arr7BIT[High(Arr7BIT)-1] := RightStr(Binerkan(27),7);
                    Arr7BIT[High(Arr7BIT)] := RightStr(Binerkan(41),7);
                  end;
             92 : begin
                    SetLength(Arr7BIT,Length(Arr7BIT)+1);
                    Arr7BIT[High(Arr7BIT)-1] := RightStr(Binerkan(27),7);
                    Arr7BIT[High(Arr7BIT)] := RightStr(Binerkan(47),7);
                  end;
             91 : begin
                    SetLength(Arr7BIT,Length(Arr7BIT)+1);
                    Arr7BIT[High(Arr7BIT)-1] := RightStr(Binerkan(27),7);
                    Arr7BIT[High(Arr7BIT)] := RightStr(Binerkan(60),7);
                  end;
            126 : begin
                    SetLength(Arr7BIT,Length(Arr7BIT)+1);
                    Arr7BIT[High(Arr7BIT)-1] := RightStr(Binerkan(27),7);
                    Arr7BIT[High(Arr7BIT)] := RightStr(Binerkan(61),7);
                  end;
             93 : begin
                    SetLength(Arr7BIT,Length(Arr7BIT)+1);
                    Arr7BIT[High(Arr7BIT)-1] := RightStr(Binerkan(27),7);
                    Arr7BIT[High(Arr7BIT)] := RightStr(Binerkan(62),7);
                  end;
            124 : begin
                    SetLength(Arr7BIT,Length(Arr7BIT)+1);
                    Arr7BIT[High(Arr7BIT)-1] := RightStr(Binerkan(27),7);
                    Arr7BIT[High(Arr7BIT)] := RightStr(Binerkan(64),7);
                  end;
        else
        begin
             Arr7BIT[High(Arr7BIT)] := RightStr(Binerkan(EQASCII27BIT[Ord(StrASCII[i])]),7);
        end;
        end; { case }
    end; { for }

    i := 1;
    x := 1;
    z := 0;

    SetLength(ArrPDU,z+1);

 
    while i <= High(Arr7BIT) do
    begin
        if (i > 1) and ((i) mod 8 = 0) then
        begin
           x := 1;
           inc(i);
        end
        else
        begin
          ArrPDU[z] := RightStr(Arr7BIT[i],x) + Arr7BIT[i-1];
          SetLength(Arr7BIT[i],Length(Arr7BIT[i])-x);
          inc(z);
          SetLength(ArrPDU,z+1);
          Inc(x);
          Inc(i);
        end;
    end;

    ArrPDU[High(ArrPDU)] := Arr7BIT[High(Arr7BIT)];

    for i := 0 to High(ArrPDU) do
       StrPDU := StrPDU + IntToHex(Bin2Long(ArrPDU[i]),2);

    ArrPDU   := nil;
    Arr7Bit  := nil;

    {if RightStr(StrPDU,2) = '00' then
       StrPDU := LeftStr(StrPDU,Length(StrPDU)-2);}

    Result := StrPDU;
end; { TSMSCODEC.ASCII2PDU7BIT }


{

--------------------------------------------------------------------------------
  procedure DecodeSMS

  -> Decode the SMSPDU then parse the element (such as the sender and the message) to be returned.
 
  -> Return value: stringlist (length: 2, index 0: sender number, index 1: the message
--------------------------------------------------------------------------------

}

function TSMSCODEC.DecodeSMS(StrSMS : string) : TStringList;
var i, j, x, y, z, PanjangUDH, PanjangData : integer;
    StrBiner, StrPDU, StrPengirim, s : string;
    PakeUDH, Alpha : boolean; Elemen : TStringList;
    zDCS : integer; zDCSBinIdx23 : string;
begin
    Elemen := TStringList.Create;

    i := 1;

    PakeUDH := False;
    Alpha := False;

    x := StrToInt('$' + Copy(StrSMS,i,2));
    i := i + 2;

    i := i + (x * 2);

    x := StrToInt('$' + Copy(StrSMS,i,2));

    StrBiner := Binerkan(x);
    if StrBiner[2] = '1' then
    begin
       PakeUDH := True;
    end;

    i := i + 2;

    x := StrToInt('$' + Copy(StrSMS,i,2));
    y := x;

    i := i + 2;

    z := StrToInt('$' + Copy(StrSMS,i,2));
    StrBiner := Binerkan(z);

    if Copy(StrBiner,2,3) = '101' then
       Alpha := True;

    i := i + 2;

    if x mod 2 <> 0 then
       x := x + 1;

    s := Copy(StrSMS,i,x);

    for j := 1 to Length(s) do
    begin
       if j mod 2 = 0 then
       begin
          StrPengirim := StrPengirim + s[j] + s[j-1];
       end;
    end;

    if Alpha = True then
    begin
       StrPengirim := PDU7BIT2ASCII(s,0,Length(s));
       StrPengirim := StringReplace(StrPengirim,'@','',[rfReplaceAll]);
    end
    else
       StrPengirim := Copy(StrPengirim,1,y);

    Elemen.Add(StrPengirim);

    i := i + x + 2;

    // Data Coding Schemes (DCS)
    z := StrToInt('$' + Copy(StrSMS,i,2));
    StrBiner := Binerkan(z);

    zDCSBinIdx23 := Copy(StrBiner,5,2);

    zDCS := 0;

    if zDCSBinIdx23 = '00' then
       zDCS := 0; // 7-bit

    if zDCSBinIdx23 = '01' then
       zDCS := 1; // 8-bit

    if zDCSBinIdx23 = '10' then
       zDCS := 2; // UCS2

    if zDCSBinIdx23 = '11' then
       zDCS := 0; // reserved (pake 7-bit)

    i := i + 2;

    x := 14; // abaikan SCTS

    i := i + x;

    PanjangData := StrToInt('$' + Copy(StrSMS,i,2));

    i := i + 2;

    StrPDU := Copy(StrSMS,i,Length(StrSMS));

    if PakeUDH then
       PanjangUDH := StrToInt('$' + Copy(StrSMS,i,2))
    else
       PanjangUDH := 0;

    case zDCS of
         0 : Elemen.Add(PDU7BIT2ASCII(StrPDU, PanjangUDH, PanjangData));
         1 : Elemen.Add(PDU8BIT2ASCII(StrPDU, PanjangUDH, PanjangData));
         2 : Elemen.Add(PDU16BIT2ASCII(StrPDU, PanjangUDH, PanjangData));
    else
         Elemen.Add(PDU7BIT2ASCII(StrPDU, PanjangUDH, PanjangData));
    end;
    Result := Elemen;
end; { TSMSCODEC.DecodeSMS }


{

--------------------------------------------------------------------------------
  procedure EncodeSMS

  -> Compose an SMS message
  -> Paramaters:
     strTujuan = string; -> The destination number
     strPesan = string; -> Your message to be sent

  -> Return value: SMS-PDU
--------------------------------------------------------------------------------

}


function TSMSCODEC.EncodeSMS(StrTujuan, StrPesan: string): string;
var zTujuan, zPesan, Gabung: string;
    i, pjTujuan : integer;
begin
    pjTujuan := Length(StrTujuan);
    // If length of StrTujuan is odd, add "F" to the end
    if Length(StrTujuan) mod 2 = 1 then
       StrTujuan := StrTujuan + 'F';

    // The reversing process of destination number (swapped nibble)
    for i := 1 to Length(StrTujuan) do
    begin
       if i mod 2 = 0 then
       begin
          zTujuan := zTujuan + StrTujuan[i] + StrTujuan[i-1];
       end;
    end;

    // We use internasional format here, add 91 in front of the destination number
    zTujuan := IntToHex(pjTujuan,2) + '91' + zTujuan;
   
    if Length(StrPesan) > 0 then
       zPesan := ASCII2PDU7BIT(StrPesan); // We use 7Bit encoding here
      

    // Add the hexadecimal reperesentation of the PDU length (1/2 of the number of chars) in front of the PDU
    zPesan := IntToHex(Length(StrPesan),2) + zPesan;

    // We use the SMSC number in the cellphone/gsmmodem, no status report, no UDH
    Gabung := '000100' + zTujuan + '0000' + zPesan;
   
    result := Gabung;
end; { TSMSCODEC.EncodeSMS }

end.

4使用代码示例
procedure TForm1.Button1Click(Sender: TObject);
begin
   Edit2.Text := SMSCODEC1.ASCII2PDU7BIT(Edit1.Text);
   Edit6.Text := Edit2.Text;
end;

procedure TForm1.Button2Click(Sender: TObject);
begin
   Edit3.Text := SMSCODEC1.PDU7BIT2ASCII(Edit6.Text,0,Length(Edit2.Text));
end;

procedure TForm1.Label1Click(Sender: TObject);
begin
   ShellExecute(Handle,'open','http://www.averagecoder.com','','',SW_SHOWNORMAL);
end;

procedure TForm1.Label1MouseEnter(Sender: TObject);
begin
   Label1.Font.color := clBlue;
end;

procedure TForm1.Label1MouseLeave(Sender: TObject);
begin
   Label1.Font.color := clBlack;
end;

procedure TForm1.Button3Click(Sender: TObject);
var ResultList: TStringList;
begin
   ResultList := SMSCODEC1.DecodeSMS(Edit4.Text);
   Edit5.Text := ResultList.Strings[0]; // sender number
   Memo1.Text := ResultList.Strings[1]; // The message
end;

procedure TForm1.Button4Click(Sender: TObject);
begin
   Edit8.Text := SMSCODEC1.EncodeSMS(Edit7.Text,Memo2.Text)
end;

你可能感兴趣的:(算法,windows,F#,J#,Delphi)