ActiveMQ 安装windwos服务不能启动问题
一.AcitveMQ windwos 服务
1.安装目录下新建 temp文件夹
2.安装目录下\bin\win32\wrapper.conf指定java.io.tempdir目录
4.出现如下错误 Unable to execute Java command. 系统找不到指定的文件。 (0x2)
5.指定Java安装路径
二.ActiveMQ web界面安全验证配置
1.安装目录下\conf\jetty.xml 中
2.安装目录下\conf\jetty-realm.properties 中修改密码
1.安装目录下新建 temp文件夹
2.安装目录下\bin\win32\wrapper.conf指定java.io.tempdir目录
wrapper.java.additional.10=-Djava.io.tmpdir="%ACTIVEMQ_HOME%/temp"
# ------------------------------------------------------------------------ # Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed with # this work for additional information regarding copyright ownership. # The ASF licenses this file to You under the Apache License, Version 2.0 # (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # ------------------------------------------------------------------------ #******************************************************************** # Wrapper Properties #******************************************************************** #wrapper.debug=TRUE set.default.ACTIVEMQ_HOME=../.. set.default.ACTIVEMQ_BASE=../.. wrapper.working.dir=. # Java Application wrapper.java.command=java # Java Main class. This class must implement the WrapperListener interface # or guarantee that the WrapperManager class is initialized. Helper # classes are provided to do this for you. See the Integration section # of the documentation for details. wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp # Java Classpath (include wrapper.jar) Add class path elements as # needed starting from 1 wrapper.java.classpath.1=%ACTIVEMQ_HOME%/bin/wrapper.jar wrapper.java.classpath.2=%ACTIVEMQ_HOME%/bin/run.jar # Java Library Path (location of Wrapper.DLL or libwrapper.so) wrapper.java.library.path.1=%ACTIVEMQ_HOME%/bin/win32 # Java Additional Parameters # note that n is the parameter number starting from 1. wrapper.java.additional.1=-Dactivemq.home="%ACTIVEMQ_HOME%" wrapper.java.additional.2=-Dactivemq.base="%ACTIVEMQ_BASE%" wrapper.java.additional.3=-Djavax.net.ssl.keyStorePassword=password wrapper.java.additional.4=-Djavax.net.ssl.trustStorePassword=password wrapper.java.additional.5=-Djavax.net.ssl.keyStore="%ACTIVEMQ_BASE%/conf/broker.ks" wrapper.java.additional.6=-Djavax.net.ssl.trustStore="%ACTIVEMQ_BASE%/conf/broker.ts" wrapper.java.additional.7=-Dcom.sun.management.jmxremote wrapper.java.additional.8=-Dorg.apache.activemq.UseDedicatedTaskRunner=true wrapper.java.additional.9=-Djava.util.logging.config.file=logging.properties wrapper.java.additional.10=-Djava.io.tmpdir="%ACTIVEMQ_HOME%/temp" # Uncomment to enable remote jmx #wrapper.java.additional.n=-Dcom.sun.management.jmxremote.port=1616 #wrapper.java.additional.n=-Dcom.sun.management.jmxremote.authenticate=false #wrapper.java.additional.n=-Dcom.sun.management.jmxremote.ssl=false # Uncomment to enable YourKit profiling #wrapper.java.additional.n=-Xrunyjpagent # Uncomment to enable remote debugging #wrapper.java.additional.n=-Xdebug -Xnoagent -Djava.compiler=NONE #wrapper.java.additional.n=-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005 # Initial Java Heap Size (in MB) #wrapper.java.initmemory=3 # Maximum Java Heap Size (in MB) wrapper.java.maxmemory=512 # Application parameters. Add parameters as needed starting from 1 wrapper.app.parameter.1=org.apache.activemq.console.Main wrapper.app.parameter.2=start #******************************************************************** # Wrapper Logging Properties #******************************************************************** # Format of output for the console. (See docs for formats) wrapper.console.format=PM # Log Level for console output. (See docs for log levels) wrapper.console.loglevel=INFO # Log file to use for wrapper output logging. wrapper.logfile=%ACTIVEMQ_BASE%/data/wrapper.log # Format of output for the log file. (See docs for formats) wrapper.logfile.format=LPTM # Log Level for log file output. (See docs for log levels) wrapper.logfile.loglevel=INFO # Maximum size that the log file will be allowed to grow to before # the log is rolled. Size is specified in bytes. The default value # of 0, disables log rolling. May abbreviate with the 'k' (kb) or # 'm' (mb) suffix. For example: 10m = 10 megabytes. wrapper.logfile.maxsize=0 # Maximum number of rolled log files which will be allowed before old # files are deleted. The default value of 0 implies no limit. wrapper.logfile.maxfiles=0 # Log Level for sys/event log output. (See docs for log levels) wrapper.syslog.loglevel=NONE #******************************************************************** # Wrapper Windows Properties #******************************************************************** # Title to use when running as a console wrapper.console.title=ActiveMQ #******************************************************************** # Wrapper Windows NT/2000/XP Service Properties #******************************************************************** # WARNING - Do not modify any of these properties when an application # using this configuration file has been installed as a service. # Please uninstall the service before modifying this section. The # service can then be reinstalled. # Name of the service wrapper.ntservice.name=ActiveMQ # Display name of the service wrapper.ntservice.displayname=ActiveMQ # Description of the service wrapper.ntservice.description=ActiveMQ Broker # Service dependencies. Add dependencies as needed starting from 1 wrapper.ntservice.dependency.1= # Mode in which the service is installed. AUTO_START or DEMAND_START wrapper.ntservice.starttype=AUTO_START # Allow the service to interact with the desktop. wrapper.ntservice.interactive=false
4.出现如下错误 Unable to execute Java command. 系统找不到指定的文件。 (0x2)
5.指定Java安装路径
wrapper.java.command=C:/Program Files/Java/jdk1.7.0_25/bin/java
# ------------------------------------------------------------------------ # Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed with # this work for additional information regarding copyright ownership. # The ASF licenses this file to You under the Apache License, Version 2.0 # (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # ------------------------------------------------------------------------ #******************************************************************** # Wrapper Properties #******************************************************************** # wrapper.debug=TRUE set.default.ACTIVEMQ_HOME=../.. set.default.ACTIVEMQ_BASE=../.. wrapper.working.dir=. # Java Application wrapper.java.command=C:/Program Files/Java/jdk1.7.0_25/bin/java # Java Main class. This class must implement the WrapperListener interface # or guarantee that the WrapperManager class is initialized. Helper # classes are provided to do this for you. See the Integration section # of the documentation for details. wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp # Java Classpath (include wrapper.jar) Add class path elements as # needed starting from 1 wrapper.java.classpath.1=%ACTIVEMQ_HOME%/bin/wrapper.jar wrapper.java.classpath.2=%ACTIVEMQ_HOME%/bin/run.jar # Java Library Path (location of Wrapper.DLL or libwrapper.so) wrapper.java.library.path.1=%ACTIVEMQ_HOME%/bin/win32 # Java Additional Parameters # note that n is the parameter number starting from 1. wrapper.java.additional.1=-Dactivemq.home="%ACTIVEMQ_HOME%" wrapper.java.additional.2=-Dactivemq.base="%ACTIVEMQ_BASE%" wrapper.java.additional.3=-Djavax.net.ssl.keyStorePassword=password wrapper.java.additional.4=-Djavax.net.ssl.trustStorePassword=password wrapper.java.additional.5=-Djavax.net.ssl.keyStore="%ACTIVEMQ_BASE%/conf/broker.ks" wrapper.java.additional.6=-Djavax.net.ssl.trustStore="%ACTIVEMQ_BASE%/conf/broker.ts" wrapper.java.additional.7=-Dcom.sun.management.jmxremote wrapper.java.additional.8=-Dorg.apache.activemq.UseDedicatedTaskRunner=true wrapper.java.additional.9=-Djava.util.logging.config.file=logging.properties wrapper.java.additional.10=-Djava.io.tmpdir="%ACTIVEMQ_HOME%/temp" # Uncomment to enable remote jmx #wrapper.java.additional.n=-Dcom.sun.management.jmxremote.port=1616 #wrapper.java.additional.n=-Dcom.sun.management.jmxremote.authenticate=false #wrapper.java.additional.n=-Dcom.sun.management.jmxremote.ssl=false # Uncomment to enable YourKit profiling #wrapper.java.additional.n=-Xrunyjpagent # Uncomment to enable remote debugging #wrapper.java.additional.n=-Xdebug -Xnoagent -Djava.compiler=NONE #wrapper.java.additional.n=-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005 # Initial Java Heap Size (in MB) #wrapper.java.initmemory=3 # Maximum Java Heap Size (in MB) wrapper.java.maxmemory=512 # Application parameters. Add parameters as needed starting from 1 wrapper.app.parameter.1=org.apache.activemq.console.Main wrapper.app.parameter.2=start #******************************************************************** # Wrapper Logging Properties #******************************************************************** # Format of output for the console. (See docs for formats) wrapper.console.format=PM # Log Level for console output. (See docs for log levels) wrapper.console.loglevel=INFO # Log file to use for wrapper output logging. wrapper.logfile=%ACTIVEMQ_BASE%/data/wrapper.log # Format of output for the log file. (See docs for formats) wrapper.logfile.format=LPTM # Log Level for log file output. (See docs for log levels) wrapper.logfile.loglevel=INFO # Maximum size that the log file will be allowed to grow to before # the log is rolled. Size is specified in bytes. The default value # of 0, disables log rolling. May abbreviate with the 'k' (kb) or # 'm' (mb) suffix. For example: 10m = 10 megabytes. wrapper.logfile.maxsize=0 # Maximum number of rolled log files which will be allowed before old # files are deleted. The default value of 0 implies no limit. wrapper.logfile.maxfiles=0 # Log Level for sys/event log output. (See docs for log levels) wrapper.syslog.loglevel=NONE #******************************************************************** # Wrapper Windows Properties #******************************************************************** # Title to use when running as a console wrapper.console.title=ActiveMQ #******************************************************************** # Wrapper Windows NT/2000/XP Service Properties #******************************************************************** # WARNING - Do not modify any of these properties when an application # using this configuration file has been installed as a service. # Please uninstall the service before modifying this section. The # service can then be reinstalled. # Name of the service wrapper.ntservice.name=ActiveMQ # Display name of the service wrapper.ntservice.displayname=ActiveMQ # Description of the service wrapper.ntservice.description=ActiveMQ Broker # Service dependencies. Add dependencies as needed starting from 1 wrapper.ntservice.dependency.1= # Mode in which the service is installed. AUTO_START or DEMAND_START wrapper.ntservice.starttype=AUTO_START # Allow the service to interact with the desktop. wrapper.ntservice.interactive=false
二.ActiveMQ web界面安全验证配置
1.安装目录下\conf\jetty.xml 中
<bean id="securityConstraint" class="org.eclipse.jetty.http.security.Constraint">
<property name="name" value="BASIC" />
<property name="roles" value="admin" />
<property name="authenticate" value="false" />
</bean>改为
<property name="authenticate" value="true" />
2.安装目录下\conf\jetty-realm.properties 中修改密码