XMANAGER 连接到REDHAT AS 5 需要修改的地方

 

已经找不到出处了...

 

一、 XMANAGER  连接到 REDHAT AS 5  需要修改的地方。
 
rhel5
rhel4 不同的地方是, rhel5 裡没有 /etc/X11/gdm/ 这个目录, rhel5 gdm 的配置文件放在这裡 /usr/share/gdm/defaults.comf ,这一点可能是困扰大家的地方。

/usr/share/gdm/defaults.conf 裡确保有以下几句配置:

Enable=true
DisplaysPerHost=10
Port=177
/etc/inittab 裡把默认级别改為 5
id:5:initdefault:

再在这个文件裡加一句:
x:5:respawn:/usr/bin/gdm

后重啟系统。然后在 windows 系统上运行 xmanager2 裡的 Xbrowser 程序,在裡面新建一个 Xmanager Session ,在 Host 这裡输入 ip 地址,其它配置都不要改变(包括端口号),确定退出。然后双击这个 New Xmanager Session ,看到登录界面:


 
二、 如果允许 Root 用户连接到 XMANAGER 需要修改以下内容:
 
 
  # vi defaults.conf
 
[security]
# Allow root to login.  It makes sense to turn this off for kiosk use, when
# you want to minimize the possibility of break in.
AllowRoot=true
# Allow login as root via XDMCP.  This value will be overridden and set to
# false if the /etc/default/login file exists and contains
# "CONSOLE=/dev/login", and set to true if the /etc/default/login file exists
# and contains any other value or no value for CONSOLE.
AllowRemoteRoot=true
# This will allow remote timed login.
AllowRemoteAutoLogin=false
# 0 is the most restrictive, 1 allo
 
 
#vi /etc/securetty
......
tty2
tty3
tty4
tty5
tty6
tty7
tty8
tty9
tty10
tty11
pts/0
pts/1
pts/2
pts/3
pts/4

 
添加这一些。
 
 
# vi /etc/pam.d/login
 
#%PAM-1.0
#auth [user_unknown=ignore success=ok ignore=ignore default=bad] pam_securetty.so
auth       include      system-auth
account    required     pam_nologin.so
account    include      system-auth
password   include      system-auth
# pam_selinux.so close should be the first session rule
session    required     pam_selinux.so close
session    include      system-auth
session    required     pam_loginuid.so
session    optional     pam_console.so
# pam_selinux.so open should only be followed by sessions to be executed in the user context
session    required     pam_selinux.so open
session    optional     pam_keyinit.so force revoke
~
 
#vi  /etc/pam.d/remote
 
#%PAM-1.0
#auth       required     pam_securetty.so
auth       include      system-auth
account    required     pam_nologin.so
account    include      system-auth
password   include      system-auth
# pam_selinux.so close should be the first session rule
session    required     pam_selinux.so close
session    include      system-auth
session    required     pam_loginuid.so
session    optional     pam_console.so
# pam_selinux.so open should only be followed by sessions to be executed in the user context
session    required     pam_selinux.so open
session    optional     pam_keyinit.so force revoke
~
~
 
#vi /etc/xinetd.d/telnet
 
# default: on
# description: The telnet server serves telnet sessions; it uses \
#       unencrypted username/password pairs for authentication.
service telnet
{
        flags           = REUSE
        socket_type     = stream
        wait            = no
        user            = root
        server          = /usr/sbin/in.telnetd
        log_on_failure  += USERID
        disable         = no
}
~
~
 

~

你可能感兴趣的:(windows,redhat,socket,Security)