在ubuntu 10.10下安装KScope代码阅读器

在网上查找kscope的安装，建议使用如下脚本：

#!/bin/bash
# This script helps you install Kscope on Ubuntu 9.04.
# You can also use it to fix "Kscope doesn't run in KDE4" bug.

echo "Determining machine hardware name... "
MACHINE=`uname -m`
case "$MACHINE" in
i386 | i586 | i686)
ARCH="i386"
;;
x86_64)
ARCH="amd64"
;;
*)
ARCH="i386"
;;
esac

# If Kscope is not installed, install it.
which kscope &> /dev/null
if [ $? -ne 0 ]; then
echo "Installing kscope..."
sudo apt-get install kscope || /
wget http://archive.ubuntu.com/ubuntu/pool/universe/k/kscope/kscope_1.6.0-1_${ARCH}.deb && /
sudo dpkg -i kscope_*.deb || /
sudo apt-get -fy install || /
echo "Oops, some error happens..."
fi

kscope -v &> /dev/null
if [ $? -eq 0 ]; then
echo "Kscope works fine."
exit
fi

echo "Downloading KDE3 libraries needed by kscope..."
wget http://ftp.debian.org/debian/pool/main/k/kdebase/kate_3.5.9.dfsg.1-6+lenny1_${ARCH}.deb
dpkg -x kate_3*.deb kate

echo "Installing KDE3 libraries..."
sudo cp kate/usr/lib/libkateinterfaces.so.0.0.0 /usr/local/lib/
sudo cp kate/usr/lib/libkateutils.so.0.0.0 /usr/local/lib
sudo ln -s /usr/local/lib/libkateinterfaces.so.0.0.0 /usr/local/lib/libkateinterfaces.so.0
sudo ln -s /usr/local/lib/libkateutils.so.0.0.0 /usr/local/lib/libkateutils.so.0
sudo ldconfig

echo "Finished."

可是在使用的时候出现如下错误提示：

Determining machine hardware name...
Downloading KDE3 libraries needed by kscope...
--2010-12-30 22:44:04-- http://ftp.debian.org/debian/pool/main/k/kdebase/kate_3.5.9.dfsg.1-6_amd64.deb
登陆http://ftp.debian.org/debian/pool/main/k/kdebase/目录下，发现/kate_3.5.9.dfsg.1-6_amd64.deb已经变为kate_3.5.9.dfsg.1-6+lenny1_${ARCH}.deb，将脚本重新修改一下文件名然后执行，就可以正常安装kscope使用了。

注意，如果安装出了问题可以：

sudo apt-get install -f

或者

sudo dpkg --configure -a