[emerg] 第4页

nginx: [emerg] bind() to 0.0.0.0:80 failed (10013: An attempt was made to access a socket in a way f

在下载了nginx后，cmd下运行nginx.exe文件时，出现错误nginx:[emerg]bind()to0.0.0.0:80failed(10013:Anattemptwasmadetoaccessasocketinawayforbiddenbyitsaccesspermissions

哈娃娃啊·2020-10-27 15:38

nginx端口被占用：nginx: [emerg] bind() to 0.0.0.0:80 failed(98: Address already in use)解决方法

1.判断端口是被Nginx自己所占用还是其他进程所占用；（lsof-i:80查看占用80端口的进程）2.如果是Nginx占用的话，说明这是你在开启Nginx没有关闭后再次启动Nginx，此时的Nginx已经打开，不用进行你这个再次启动的操作即可；如果你想要重启Nginx服务：systemctlrestartnginx.service如果是被Apache或者是其他的所占用的话，进行以下步骤：（1）关

FlySupper·2020-09-17 01:05

[emerg] 15060#200: bind() to 0.0.0.0:80 failed (10013: An attempt was made to access a socket ......

打开日志看一下，报错[emerg]15060#200:bind()to0.0.0.0:80failed(10013:Anattemptwasmadetoaccessasocketinawayforbiddenbyitsaccesspermissions

渐暖°·2020-09-17 00:40

解决Mac nginx问题 [emerg] 54933#0: bind() to 0.0.0.0:80 failed (13: Permission denied)

brewservicesrestartnginxStoppingnginx...(mighttakeawhile)==>Successfullystoppednginx(label:homebrew.mxcl.nginx)==>Successfullystartednginx(label:homebrew.mxcl.nginx)但是实际上没启动成功，查看下错误日志tail-n10/usr/loca

weixin_33829657·2020-09-17 00:00

启动nginx报错 [emerg] 23314#0: bind() to 0.0.0.0:80 failed (98: Address already in use)

昨天关掉nginx更新证书后启动nginx失败，错误信息如下：解决方法：netstat-ntlp查看端口占用情况，kill掉占用端口的对应进程，启动nginx即可

CocoaJerry·2020-09-16 23:33

nginx 服务重启报错

nginx服务重启报错：1、nginx:[emerg]open()"/usr/local/etc/nginx/nginx.conf"failed(2:Nosuchfileordirectory)2、nginx

kangsf1989·2020-09-16 23:31

已解决：[emerg] bind() to 0.0.0.0:80 failed (10013: An attempt was made to access a socket in a way forb

表示nginx监听80端口失败，很有可能是80端口被占用这里给出一个比较便捷地解决方法，我们在nginx目录下的conf文件夹中打开nginx.conf,修改监听的端口，我在这里改为了8085端口，保存后使用nginx-t检查就没有错误了最后去浏览器输入地址localhost:8085确认一下

CanXue6789·2020-09-16 22:31

nginx 使用HTTPS协议-SSL证书模块报错解决-附nginx安装 : [emerg] the ssl parameter requires ngx_http_ssl_module in n

nginx使用HTTPS协议-SSL证书模块报错解决-附nginx安装:[emerg]the"ssl"parameterrequiresngx_http_ssl_moduleinnginx.cLinux

wuhuhuan·2020-09-15 19:19

nginx bind() to 0.0.0.0:**** failed (13: Permission denied) 解决方案

nginx启动失败,日志里面报错信息如下:Startingnginx:nginx:[emerg]bind()to0.0.0.0:****failed(13:Permissiondenied)权限拒绝，经检查发现是开启

chouhunpo4240·2020-09-15 13:50

linux设备驱动学习笔记--内核调试方法之printk

，printk类似于用户态的printf函数，但是比printf函数多了一个日志级别，内核中最常见的日志输出都是通过调用printk来实现的，其打印级别有8种可能的记录字串,在头文件里定义:KERN_EMERG0

ITsenlin·2020-09-14 13:17

mac系统nginx: [emerg] getgrnam("") failed 以及brew无法启动nginx

所以想改下nginx的默认用户，改成自己的名字后还是报错，提示：nginx:[emerg]getgrnam("myname")failedngingx文档关于user的说明：Define

wangjinyu124419·2020-09-14 11:43

nginx证书报错： error:2006D080:BIO routines:BIO_new_file:no such file

ERROR:nginx:[emerg]BIO_new_file("/www/server/nginx/conf/cert/qipai.ml.crt")failed(SSL:error:02001002:

u010089114·2020-09-14 11:32

nginx: [emerg] getgrnam("nogroup") failed (2: No such file or directory) termux安装nginx

今天在termux上门安装nginxpkginstallnginx第二步切换模拟root权限tsu第三步，重新挂载，获取读写权限（不确定是不是必要的）mount-oremount,rw/system第四步，测试运行nginx（在模拟root权限下,-t是测试的意思）nginx-t然后出现了错误nginx:theconfigurationfile/data/data/com.termux/files

江湖人称黑哥·2020-09-14 11:42

Nginx 源码安装启动报错 nginx: [emerg] getgrnam("ninx") failed

Nginx源码安装源码安装完启动时，报错[root@localhost~]#/usr/local/nginx/sbin/nginxnginx:[emerg]getgrnam(“ninx”)failed一般出现这个问题

行走的猫儿·2020-09-14 10:26

nginx安装启动报错

[[email protected]]#/usr/local/nginx/sbin/nginxnginx:[emerg]getpwnam("nginx")failed[root@localhostnginx

weixin_43291687·2020-09-14 09:36

nginx报错：nginx: [emerg] unknown directive in /etc/nginx/conf.d/test.conf:4

nginx报错：nginx:[emerg]unknowndirectivein/etc/nginx/conf.d/test.conf:4解决:第四行出现了tab空格，换成正常的空格即可配置文件里的所有空格都删除从新用空格键敲出来空格即可

子钦加油·2020-09-13 13:36

nginx启动失败之nginx: [emerg] invalid number of arguments in "root" directive in nginx/nginx.conf:41

WriteByMonkeyfly以下内容均为原创，如需转载请注明出处。前提由于更换了新的SVN地址，所以必须在新的SVN地址上重新检出所有的项目至本地。因为之前都习惯用中文命名文件夹，这次就想尝试用英文命名。而且之前也听别人说中文命名可能会导致某些问题。命名的项目文件都会以文件路径的形式出现在nginx的conf配置文件中，所以建议用英文命名。我一直都是使用中文命名的，使用半年了，也从来没出现过问

monkeyfly007·2020-09-13 13:14

nginx: [emerg] directive "location" has no opening "{"

1.报错：[emerg]directive"location"hasnoopening"{"in.....解决方法：由于对应行或者附近行的“｛”前面缺少空格，导致该错误！

kunatnet·2020-09-13 12:33

nginx: [emerg] invalid number of arguments in "user" directive in /usr/local/nginx/conf/nginx.conf:5

修改配置文件后，启动nginx时报错：nginx:[emerg]invalidnumberofargumentsin"user"directivein/usr/local/nginx/conf/nginx.conf

别了耳听爱情的年龄·2020-09-13 10:14

重启NGINX 问题：nginx: [emerg] open()错误问题

在我重启Nginx的时候出现这样的提示：nginx...nginx:[emerg]open()"/export/Logs/nginx/nginx_error.log"failed(2:Nosuchfileordirectory

Seven7707·2020-09-13 03:15

nginx:[emerg] getgrnam("root") failed in /conf/nginx.conf:1 解决办法

前言自己在本地用nginx配置了反向代理，保存配置，重启时报错：nginx:[emerg]getgrnam(“root”)failedin/conf/nginx.conf:1，下面来看下如何解决。

大白快跑8·2020-09-11 20:58

nginx安装 nginx: [emerg] getpwnam(“www-data”) failed 错误

错误的原因是没有创建www这个用户，应该在服务器系统中添加www用户组和用户www，如下命令：#/usr/sbin/groupadd-fwww-data#/usr/sbin/useradd-gwww-datawww-data

SHUIPING_YANG·2020-09-11 20:18

nginx: [emerg] getpwnam(“www”) failed错误

linux64系统中安装nginx时如果出现错误：nginx:[emerg]getpwnam(“www”)failedin........解决方法1：在nginx.conf中把userwwwwww;的注释去掉

yuntian_zhongyi·2020-09-11 20:35

Nginx: [emerg] getpwnam(“www”) failed错误

Linux64系统中安装nginx时如果出现错误：nginx:[emerg]getpwnam(“www”)failedin........解决方法1：在nginx.conf中把userwwwwww;的注释去掉

Lansonli·2020-09-11 20:08

nginx: [emerg] getpwnam("nginx") failed in /usr/local/nginx/conf/nginx.conf:2

启动nginx报错：nginx:[emerg]getpwnam("nginx")failedin/usr/local/nginx/conf/nginx.conf:2是因为配制文件中使用的启动账户在系统中并没有找到解决办法

weixin_33971205·2020-09-11 20:20

Nginx启动报错： could not open error log file: open() &q

couldnotopenerrorlogfile:open()"/usr/local/nginx/logs/error.log"failed(13:Permissiondenied)2014/08/0420:35:45[emerg

weixin_30568591·2020-09-11 20:33

nginx:[emerg] : getpwnam("root") failed in /usr/local/nginx/conf/nginx.conf:2解决办法

最近在做一个网站项目，用的是nginx框架，在布置服务器启动nginx时，报出下面的错误信息：“[emerg]63883#0:getpwnam("root")failedin/usr/local/nginx

hi马后炮·2020-09-11 20:45

[emerg]: getpwnam(“nginx”) failed

这个问题解决后，又会报错：nginx:[emerg]mkdir()"/var/cache/nginx/client_temp"failed(2:Nosuchfileordirectory)只需要创建mkdir-p

灰暗角落里的琴·2020-09-11 20:02

nginx报错 [emerg] getpwnam("nginx") failed

这是编译安装时指定了nginx用户和组解决方法:useradd指定的用户然后就可以啦创建一个指定的用户

sclkw·2020-09-11 20:52

Linux下启动nginx服务时报错[emerg]: getpwnam(“nginx”) failed

[root@server1~]#/usr/local/nginx/sbin/nginxnginx:[emerg]getpwnam("nginx")failed没有安装nginx用户导致的无法启动[root

Cinjosy·2020-09-11 20:13

报错nginx: [emerg] getgrnam("nginx") failed

源码安装nginx后启动，报错[root@localhostsbin]#/aplication/nginx/sbin/nginxnginx:[emerg]getgrnam(“nginx”)failed解决方法

ST_jing·2020-09-11 20:32

[emerg]: getpwnam(“nginx”) failed

在启动nginx之前还需要添加nginx用户组，否则会提示[emerg]:getpwnam(“nginx”)failed添加用户组sudoadduser--system--no-create-home-

追寻北极·2020-09-11 19:41

nginx [emerg]: getpwnam(“www”) failed 处理办法

应该在服务器系统中添加www用户组和用户www，如下命令：/usr/sbin/groupadd-fwww/usr/sbin/useradd-gwwwwww

hinswhale·2020-09-11 19:03

nginx 错误记录

错误1：nginx:[emerg]mkdir()"/var/tmp/nginx/client/"failed(2:Nosuchfileordirectory)[[email protected]

Dylan_csdn·2020-09-11 19:53

nginx: [emerg] getpwnam("nobody") failed

【问题】nginx-t#校验配置下，出现如下错误nginx:[emerg]getpwnam("nobody")failed【解决方案】网上比较多的说法是nobody这个用户不存在，但在用户存在的情况下仍然会报错安装

xm_caiyq·2020-09-11 19:04

启动Nginx报错nginx: [emerg] getpwnam(

1、在安装和配置完成Nginx之后就差重新启动了结果报错了，报错如下：[root@Centos01]#/usr/local/nginx/sbin/nginxnginx:[emerg]getpwnam("

俊伟祺i·2020-09-11 19:57

nginx服务无法启动nginx: [emerg] getpwnam(“nginx”) failed

一、nginx:[emerg]getpwnam(“nginx”)failed启动服务时出现：nginx:[emerg]getpwnam(“nginx”)failed报错信息是安装nginx服务时没有创建

风之老凌·2020-09-11 19:19

nginx 出现 nginx: [emerg] getpwnam("nginx") failed 错误

[emerg]:getpwnam(“nginx”)failed[[email protected]]#/usr/local/nginx/sbin/nginxnginx:[emerg]getpwnam

weixin_39251838·2020-09-11 19:18

安装完nginx启动时，出现了nginx: [emerg] getpwnam("nginx") failed

检查配置nginx.conf是否有usernginx;(表示使用nginx启动子进程)?再查看系统是否有nginx这个用户，没有的话创建一个nginx用户,也可以注释掉

liuhehe321·2020-09-11 18:05

Linux环境下安装nginx,启动报错 nginx：nginx: [emerg] getpwnam("nginx") failed

解决方案：修改nginx.conf文件去掉usernobody前面的#注释修改为：重新启动nginx服务即可

大伟的博客·2020-09-11 18:02

nginx安装 nginx: [emerg] getpwnam(“www”) failed 错误

nginx安装nginx:[emerg]getpwnam(“www（nobody）”)failed错误解决方法1：在nginx.conf中把usernobody的注释去掉既可解决方法2：错误的原因是没有创建

故常无-欲以观其妙·2020-09-11 18:56

Nginx启动报错[emerg] getpwnam("nginx") failed

具体报错如下图:原因：Nginx编译的时候指定了用户组和用户，但是系统中并没有这个用户导致的问题解决方法：新建相应的用户组和用户名，或者不指定用户组和用户名重新编译一次Nginx

折木-Oreki·2020-09-11 18:36

nginx: [emerg] getpwnam(“www”) failed 错误处理方法

解决方案一在nginx.conf中把usernobody的注释去掉既可解决方案二原因是没有创建nginx这个用户，应该在服务器系统中添加nginx用户组和用户nginx，如下命令：groupadd-fnginxuseradd-gnginnginx

阿豪的BLOG·2020-09-11 18:04

排障集合———nginx: [emerg] getpwnam(“nginx“) failed报错

localhostnginx-1.15.9]#nginx-tnginx:theconfigurationfile/usr/local/nginx/conf/nginx.confsyntaxisok==nginx:[emerg

知无涯学无尽·2020-09-11 18:11

nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Ad

把服务从起一下发现提示错误如下：Startingnginx:nginx:[emerg]bind()to0.0.0.0:80failed(98:Addressalreadyinuse)nginx:[emerg

weixin_34301132·2020-09-11 17:46

windows 使用 nginx 命令报错: nginx: [emerg] CreateFile() logs/nginx.pid

系统:win7nginx:1.17.10命令行客户端:安装git时的命令行客户端(mingw)在使用命令行启动时,报如下错误:我使用的解决方案:1.在nginx的目录下创建一个nginx.sh脚本(名字可以自定),内容如下#!/bin/bashcurrent_dir=$(dirname$(readlink-f"$0"))params=""foriin"$@";doparams="${params}

ipuppy·2020-09-11 16:24

nginx错误之 nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)

这个是nginx重启时经常遇到的。原因是nginx重复重启，自己占用了80端口。解决方法：#killall-9nginx#杀掉nginx进程#/usr/local/nginx/sbin/nginx#然后启动这样就解决了。

snihcel·2020-09-11 16:42

CentOS7:nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)

小白记录在修改nginx配置时,用超级管理员运行报错[root@localhost~]#sudo/usr/sbin/nginxnginx:[emerg]bind()to0.0.0.0:80failed(

弗朗西斯赵四·2020-09-11 16:38

关于nginx启动报错问题的解决( bind() to 0.0.0.0:443 failed)

nginx报错日志:2018/11/0716:12:54[emerg]6456#15468:bind()to0.0.0.0:443failed(10013:Anattemptwasmadetoaccessasocketinawayforbiddenbyitsaccesspermissions

小白菜--jack·2020-09-11 15:37

centos7问题nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)

首先需要杀掉nginx进程killall-9nginx然后启动nginxsystemctlstartnginx.service

包子源·2020-09-11 13:44

推荐频道

[emerg]

nginx: [emerg] bind() to 0.0.0.0:80 failed (10013: An attempt was made to access a socket in a way f

nginx端口被占用：nginx: [emerg] bind() to 0.0.0.0:80 failed(98: Address already in use)解决方法

[emerg] 15060#200: bind() to 0.0.0.0:80 failed (10013: An attempt was made to access a socket ......

解决Mac nginx问题 [emerg] 54933#0: bind() to 0.0.0.0:80 failed (13: Permission denied)

启动nginx报错 [emerg] 23314#0: bind() to 0.0.0.0:80 failed (98: Address already in use)

nginx 服务重启报错

已解决：[emerg] bind() to 0.0.0.0:80 failed (10013: An attempt was made to access a socket in a way forb

nginx 使用HTTPS协议-SSL证书模块报错解决-附nginx安装 : [emerg] the ssl parameter requires ngx_http_ssl_module in n

nginx bind() to 0.0.0.0:**** failed (13: Permission denied) 解决方案

linux设备驱动学习笔记--内核调试方法之printk

mac系统nginx: [emerg] getgrnam("") failed 以及brew无法启动nginx

nginx证书报错： error:2006D080:BIO routines:BIO_new_file:no such file

nginx: [emerg] getgrnam("nogroup") failed (2: No such file or directory) termux安装nginx

Nginx 源码安装 启动报错 nginx: [emerg] getgrnam("ninx") failed

nginx安装启动报错

nginx报错：nginx: [emerg] unknown directive in /etc/nginx/conf.d/test.conf:4

nginx启动失败之nginx: [emerg] invalid number of arguments in "root" directive in nginx/nginx.conf:41

nginx: [emerg] directive "location" has no opening "{"

nginx: [emerg] invalid number of arguments in "user" directive in /usr/local/nginx/conf/nginx.conf:5

重启NGINX 问题：nginx: [emerg] open()错误问题

nginx:[emerg] getgrnam("root") failed in /conf/nginx.conf:1 解决办法

nginx安装 nginx: [emerg] getpwnam(“www-data”) failed 错误

nginx: [emerg] getpwnam(“www”) failed错误

Nginx: [emerg] getpwnam(“www”) failed错误

nginx: [emerg] getpwnam("nginx") failed in /usr/local/nginx/conf/nginx.conf:2

Nginx启动报错： could not open error log file: open() &q

nginx:[emerg] : getpwnam("root") failed in /usr/local/nginx/conf/nginx.conf:2解决办法

[emerg]: getpwnam(“nginx”) failed

nginx报错 [emerg] getpwnam("nginx") failed

Linux下启动nginx服务时报错[emerg]: getpwnam(“nginx”) failed

报错nginx: [emerg] getgrnam("nginx") failed

[emerg]: getpwnam(“nginx”) failed

nginx [emerg]: getpwnam(“www”) failed 处理办法

nginx 错误记录

nginx: [emerg] getpwnam("nobody") failed

启动Nginx报错nginx: [emerg] getpwnam(

nginx服务无法启动nginx: [emerg] getpwnam(“nginx”) failed

nginx 出现 nginx: [emerg] getpwnam("nginx") failed 错误

安装完nginx启动时，出现了nginx: [emerg] getpwnam("nginx") failed

Linux环境下安装nginx,启动报错 nginx：nginx: [emerg] getpwnam("nginx") failed

nginx安装 nginx: [emerg] getpwnam(“www”) failed 错误

Nginx启动报错[emerg] getpwnam("nginx") failed

nginx: [emerg] getpwnam(“www”) failed 错误处理方法

排障集合———nginx: [emerg] getpwnam(“nginx“) failed报错

nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Ad

windows 使用 nginx 命令报错: nginx: [emerg] CreateFile() logs/nginx.pid

nginx错误之 nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)

CentOS7:nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)

关于nginx启动报错问题的解决( bind() to 0.0.0.0:443 failed)

centos7问题nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)

Nginx 源码安装启动报错 nginx: [emerg] getgrnam("ninx") failed