温度传感器在LCD上显示代码

温度传感器在LCD上显示代码：

#include   //头文件
#include 
#include    //数学公式头文件
#define uchar unsigned char
#define uint unsigned int
 sbit dula = P2^6;   //定义液晶显示屏的功能引脚
 sbit wela = P2^7;
 sbit rw = P1^1; 
 sbit RS = P1^0;  
 sbit LCDEN = P2^5;   //液晶数据显示
void delayUs()
{
    _nop_();        //延时
}
 void delayMs(uint a)         //毫秒级延时程序
{
    uint i, j;
    for(i = a; i > 0; i--)
        for(j = 100; j > 0; j--);
 }
/*****************************1602*******************************/
void writeComm(uchar comm)        //1602写指令程序
{
     RS = 0;    
    P0 = comm;
    LCDEN = 1;
     delayUs();
    LCDEN = 0;
    delayMs(1);
}
void writeData(uchar dat)//写数据:RS=1, RW=0;
{
     RS = 1;
     P0 = dat;        //P0口输出数据
     LCDEN = 1;
    delayUs();        //延时
    LCDEN = 0;
    delayMs(1);       //延时
 }
 void init()      //数据显示程序
 {
     rw = 0; 
     dula = wela = 0;
    writeComm(0x38);         //写入指令
   writeComm(0x0c); 
    writeComm(0x06);
    writeComm(0x01); 
}
void writeString(uchar * str, uchar length)   //字符串显示程序
{
     uchar i;
    for(i = 0; i < length; i++)
    {
         writeData(str[i]);    //写入字符串
     } }
/*****************************DS18B20*******************************/
 sbit ds = P2^2;          //定义温度传感器数据接口
void dsInit()           //读取温度传感器序列号
 {
    unsigned int i;  
    ds = 0;
    i = 100;  
     while(i>0) i--;
    ds = 1;   
    i = 4;
     while(i>0) i--;
 }
void dsWait()             //数据等待程序
 {
      unsigned int i;
      while(ds);  
      while(~ds);
      i = 4;
      while(i > 0) i--;
}
bit readBit()       //读取数据程序
{
    unsigned int i;
    bit b;
    ds = 0;
    i++;   
    ds = 1; 
   i++; i++;  
    b = ds;
    i = 8; 
    while(i>0) i--;
    return b;
}
unsigned char readByte()            //读取字节程序
{
    unsigned int i;
    unsigned char j, dat;
   dat = 0;
    for(i=0; i<8; i++)
    {
        j = readBit();
      
        dat = (j << 7) | (dat >> 1);
    }
    return dat;
}
void writeByte(unsigned char dat)              //写入字节数据
{
    unsigned int i;
    unsigned char j;
    bit b;
    for(j = 0; j < 8; j++)
    {
        b = dat & 0x01;
        dat >>= 1;
        if(b)   
        {
           ds = 0;          i++; i++;  
            ds = 1;    
            i = 8; while(i>0) i--;  
        }
        else  
        {
            ds = 0;
          i = 8; while(i>0) i--;  
            ds = 1;
           i++; i++;
        }}}
void sendChangeCmd()        //发送转换模式指令
{
    dsInit();    
    dsWait();   
    delayMs(1);    
    writeByte(0xcc);
    writeByte(0x44);
}
void sendReadCmd()
{
    dsInit();
    dsWait();
    delayMs(1);
    writeByte(0xcc); 
    writeByte(0xbe); 
}
int getTmpValue()
{
    unsigned int tmpvalue;
    int value; 
    float t;
    unsigned char low, high;
    sendReadCmd();
    low = readByte(); 
    high = readByte();
    tmpvalue = high;
    tmpvalue <<= 8;
    tmpvalue |= low;
    value = tmpvalue;
    \
    t = value * 0.0625;
    \
    value = t * 100 + (value > 0 ? 0.5 : -0.5); //大于0加0.5, 小于0减0.5
    return value;
}
void display(int v) 
{
    unsigned char count;
    unsigned char datas[] = {0, 0, 0, 0, 0};
    unsigned int tmp = abs(v);
    datas[0] = tmp / 10000;
    datas[1] = tmp % 10000 / 1000;
    datas[2] = tmp % 1000 / 100;
    datas[3] = tmp % 100 / 10;
    datas[4] = tmp % 10;
    writeComm(0xc0+3);
    if(v < 0)
    {
        writeString("- ", 2);
   }
    else
    {
       writeString("+ ", 2);
    }
    if(datas[0] != 0)
    {
        writeData('0'+datas[0]);
    }
    for(count = 1; count != 5; count++)
    {
        writeData('0'+datas[count]);
        if(count == 2)
        {
            writeData('.');
        }}}
/*****************************主函数*******************************/
void main()
{
    uchar table[] = " temputure: ";
    sendChangeCmd();
    init();
    writeComm(0x80);
    writeString(table, 4);
    while(1)
    {
        delayMs(1000); //温度转换时间需要750ms以上
        writeComm(0xc0);
        display(getTmpValue());
        sendChangeCmd();
    }}