Chipsee BeagleBone Black完整启动日志
Xshell for Xmanager Enterprise 5 (Build 0436)
Copyright (c) 2002-2014 NetSarang Computer, Inc. All rights reserved.
Type `help' to learn how to use Xshell prompt.
[C:\Users\zhwx]$
Connecting to COM3...
Connected.
U-Boot SPL 2011.09 (Aug 31 2015 - 16:46:38)
Chipsee AM335x EVM Board
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.09 (Aug 31 2015 - 16:46:38)
I2C: ready
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: HW ECC Hamming Code selected
No NAND device found!!!
0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment
Net: cpsw
Hit any key to stop autoboot: 0
SD/MMC found on device 0
reading uEnv.txt
200 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
reading uImage
3328672 bytes read
## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-3.2.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3328608 Bytes = 3.2 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 3.2.0 (zhwx@Myboot) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #2 Mon Aug 31 19:36:38 CST 2015
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: am335xevm
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] AM335X ES2.0 (sgx neon )
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyO0,115200n8 mem=512M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait rootdelay=1 init=/init ip=off
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 512840k/512840k available, 11448k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05eb000 (6028 kB)
[ 0.000000] .init : 0xc05eb000 - 0xc0627000 ( 240 kB)
[ 0.000000] .data : 0xc0628000 - 0xc0690b20 ( 419 kB)
[ 0.000000] .bss : 0xc0690b44 - 0xc06bfa24 ( 188 kB)
[ 0.000000] NR_IRQS:396
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER2 at 24000000 Hz
[ 0.000000] omap_dm_timer_switch_src: Switching to HW default clocksource(sys_clkin_ck) for timer1, this may impact timekeeping in low power state
[ 0.000000] OMAP clocksource: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000151] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.087753] pid_max: default: 32768 minimum: 301
[ 0.087850] Security Framework initialized
[ 0.087933] Mount-cache hash table entries: 512
[ 0.088238] CPU: Testing write buffer coherency: ok
[ 0.107547] omap_hwmod: pruss: failed to hardreset
[ 0.108460] print_constraints: dummy:
[ 0.108736] NET: Registered protocol family 16
[ 0.110370] OMAP GPIO hardware version 0.1
[ 0.112326] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.113804] omap_i2c.1: alias fck already exists
[ 0.114481] omap2_mcspi.1: alias fck already exists
[ 0.114650] omap2_mcspi.2: alias fck already exists
[ 0.115341] edma.0: alias fck already exists
[ 0.115357] edma.0: alias fck already exists
[ 0.115371] edma.0: alias fck already exists
[ 0.135575] bio: create slab at 0
[ 0.137292] SCSI subsystem initialized
[ 0.138567] usbcore: registered new interface driver usbfs
[ 0.138799] usbcore: registered new interface driver hub
[ 0.138955] usbcore: registered new device driver usb
[ 0.139082] musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3
[ 0.139302] musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1
[ 0.140157] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz
[ 0.141102] tps65910 1-002d: could not be detected
[ 0.142100] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.142958] Switching to clocksource gp timer
[ 0.154574] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.154720] musb-hdrc musb-hdrc.0: dma type: pio
[ 0.154977] MUSB0 controller's USBSS revision = 4ea20800
[ 0.154995] musb0: Enabled SW babble control
[ 0.155505] musb-hdrc musb-hdrc.0: USB OTG mode controller at e083c000 using PIO, IRQ 18
[ 0.155627] musb-hdrc musb-hdrc.1: dma type: pio
[ 0.155872] MUSB1 controller's USBSS revision = 4ea20800
[ 0.155886] musb1: Enabled SW babble control
[ 0.156013] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 0.156072] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ 0.156178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.156191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.156201] usb usb1: Product: MUSB HDRC host driver
[ 0.156209] usb usb1: Manufacturer: Linux 3.2.0 musb-hcd
[ 0.156217] usb usb1: SerialNumber: musb-hdrc.1
[ 0.156857] hub 1-0:1.0: USB hub found
[ 0.156881] hub 1-0:1.0: 1 port detected
[ 0.157318] musb-hdrc musb-hdrc.1: USB Host mode controller at e083e800 using PIO, IRQ 19
[ 0.157642] NET: Registered protocol family 2
[ 0.157798] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.158043] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.158258] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.158383] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.158393] TCP reno registered
[ 0.158403] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.158420] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.158555] NET: Registered protocol family 1
[ 0.158754] RPC: Registered named UNIX socket transport module.
[ 0.158765] RPC: Registered udp transport module.
[ 0.158772] RPC: Registered tcp transport module.
[ 0.158779] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.158959] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.175798] VFS: Disk quotas dquot_6.5.2
[ 0.175855] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.176473] msgmni has been set to 1001
[ 0.178887] alg: No test for stdrng (krng)
[ 0.179432] io scheduler noop registered
[ 0.179443] io scheduler deadline registered
[ 0.179504] io scheduler cfq registered (default)
[ 0.180414] Could not set LED4 to fully on
[ 0.213809] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
[ 0.789007] console [ttyO0] enabled
[ 0.793145] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
[ 0.800838] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
[ 0.808530] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3
[ 0.816218] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4
[ 0.823907] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5
[ 0.831929] omap4_rng omap4_rng: OMAP4 Random Number Generator ver. 2.00
[ 0.846003] brd: module loaded
[ 0.852908] loop: module loaded
[ 0.856393] i2c-core: driver [tsl2550] using legacy suspend method
[ 0.862854] i2c-core: driver [tsl2550] using legacy resume method
[ 0.869288] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
[ 0.876575] The board is a Chipsee Beaglebone Black Expansion.
[ 0.883034] omap_hsmmc.0: alias fck already exists
[ 0.888447] omap_hsmmc.1: alias fck already exists
[ 0.894084] da8xx_lcdc.0: alias fck already exists
[ 0.899483] da8xx_lcdc da8xx_lcdc.0: GLCD: Found HJ070NA13A panel
[ 0.905881] ==========zhwx===fb_probe===bpp is [32]
[ 0.917399] ==========zhwx===fb_check_var===bpp is [32]
[ 0.922864] ==========zhwx===da8xxfb_set_par===bpp is [32]
[ 0.928608] ==========zhwx===da8xxfb_set_par===raster_order is [0]
[ 0.936072] ==========zhwx===lcd_init===bpp is [32]
[ 0.941176] ==========zhwx===lcd_cfg_frame_buffer===bpp is [32]
[ 0.947992] ==========zhwx===da8xxfb_set_par===bpp is [32]
[ 0.948001] ==========zhwx===da8xxfb_set_par===raster_order is [0]
[ 0.949005] ==========zhwx===lcd_init===bpp is [32]
[ 0.949018] ==========zhwx===lcd_cfg_frame_buffer===bpp is [32]
[ 0.958866] Console: switching to colour frame buffer device 128x37
[ 0.998809] omap_i2c.2: alias fck already exists
[ 1.004138] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 100 kHz
[ 1.011021] davinci-mcasp.0: alias fck already exists
[ 1.017260] d_can.0: alias fck already exists
[ 1.024600] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.031639] omap2-nand driver initializing
[ 1.036103] OneNAND driver initializing
[ 1.041084] CAN device driver interface
[ 1.045139] CAN bus driver for Bosch D_CAN controller 1.0
[ 1.051555] d_can d_can.0: device registered (irq=52, irq_obj=53)
[ 1.103009] davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
[ 1.109477] davinci_mdio davinci_mdio.0: detected phy mask fffffffe
[ 1.116628] davinci_mdio.0: probed
[ 1.120185] davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver SMSC LAN8710/LAN8720
[ 1.129004] usbcore: registered new interface driver zd1201
[ 1.135006] usbcore: registered new interface driver cdc_ether
[ 1.141216] usbcore: registered new interface driver cdc_eem
[ 1.147304] usbcore: registered new interface driver dm9601
[ 1.153178] cdc_ncm: 04-Aug-2011
[ 1.156675] usbcore: registered new interface driver cdc_ncm
[ 1.162589] Initializing USB Mass Storage driver...
[ 1.167866] usbcore: registered new interface driver usb-storage
[ 1.174160] USB Mass Storage support registered.
[ 1.179336] mousedev: PS/2 mouse device common for all mice
[ 1.185782] ft5x06_ts 2-0038: failed to probe FT5X0X touchscreen device
[ 1.193294] input: ti-tsc as /devices/platform/omap/ti_tscadc/tsc/input/input0
[ 1.201596] rtc-pcf8563 2-0051: chip found, driver version 0.4.3
[ 1.209465] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[ 1.217212] rtc-pcf8563 2-0051: retrieved date/time is not valid.
[ 1.223882] rtc-pcf8563 2-0051: rtc core: registered rtc-pcf8563 as rtc0
[ 1.230999] i2c /dev entries driver
[ 1.235131] Linux video capture interface: v2.00
[ 1.240206] usbcore: registered new interface driver uvcvideo
[ 1.246231] USB Video Class driver (1.1.1)
[ 1.523793] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.530284] _regulator_get: deviceless supply vdd_mpu not found, using dummy regulator
[ 1.538930] cpuidle: using governor ladder
[ 1.543634] cpuidle: using governor menu
[ 1.551511] omap4_aes_mod_init: loading AM33X AES driver
[ 1.557195] omap4-aes omap4-aes: AM33X AES hw accel rev: 3.02
[ 1.563849] omap4_aes_probe: probe() done
[ 1.568223] omap4_sham_mod_init: loading AM33X SHA/MD5 driver
[ 1.574357] omap4-sham omap4-sham: AM33X SHA/MD5 hw accel rev: 4.03
[ 1.587891] omap4_sham_probe: probe() done
[ 1.597247] usbcore: registered new interface driver usbhid
[ 1.603095] usbhid: USB HID core driver
[ 1.607617] tiadc tiadc: attached adc driver
[ 1.612670] usbcore: registered new interface driver snd-usb-audio
[ 1.620670] _regulator_get: 2-001b supply IOVDD not found, using dummy regulator
[ 1.628487] _regulator_get: 2-001b supply DVDD not found, using dummy regulator
[ 1.636169] _regulator_get: 2-001b supply AVDD not found, using dummy regulator
[ 1.643853] _regulator_get: 2-001b supply DRVDD not found, using dummy regulator
[ 1.653661] asoc: tlv320aic3x-hifi <-> davinci-mcasp.0 mapping ok
[ 1.661085] ALSA device list:
[ 1.664223] #0: AM335X EVM
[ 1.667229] oprofile: hardware counters not available
[ 1.672504] oprofile: using timer interrupt.
[ 1.676993] nf_conntrack version 0.5.0 (8013 buckets, 32052 max)
[ 1.683738] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.689383] TCP cubic registered
[ 1.692756] NET: Registered protocol family 17
[ 1.697441] can: controller area network core (rev 20090105 abi 8)
[ 1.703988] NET: Registered protocol family 29
[ 1.708648] can: raw protocol (rev 20090105)
[ 1.713121] can: broadcast manager protocol (rev 20090105 t)
[ 1.719065] Registering the dns_resolver key type
[ 1.724048] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 1.732061] ThumbEE CPU extension supported.
[ 1.736591] mux: Failed to setup hwmod io irq -22
[ 1.742043] Power Management for AM33XX family
[ 1.746901] Trying to load am335x-pm-firmware.bin (60 secs timeout)
[ 1.753595] Copied the M3 firmware to UMEM
[ 1.757948] Cortex M3 Firmware Version = 0x18
[ 1.763067] sr_init: platform driver register failed
[ 1.771019] clock: disabling unused clocks to save power
[ 1.785936] Detected MACID=6c:ec:eb:a5:96:7f
[ 1.791241] cpsw: Detected MACID = 6c:ec:eb:a5:98:81
[ 1.798936] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[ 1.806705] rtc-pcf8563 2-0051: retrieved date/time is not valid.
[ 1.813087] rtc-pcf8563 2-0051: hctosys: invalid date/time
[ 1.819101] Waiting 1sec before mounting root device...
[ 1.834306] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 1.847031] mmc0: new high speed SDHC card at address aaaa
[ 1.853315] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
[ 1.859758] mmcblk0: p1 p2
[ 1.950531] mmc1: new high speed MMC card at address 0001
[ 1.956650] mmcblk1: mmc1:0001 MMC04G 3.60 GiB
[ 1.961482] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[ 1.967829] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[ 1.975102] mmcblk1: p1 p2
[ 1.979779] mmcblk1boot1: unknown partition table
[ 1.986211] mmcblk1boot0: unknown partition table
[ 4.153600] kjournald starting. Commit interval 5 seconds
[ 4.162583] EXT3-fs (mmcblk0p2): using internal journal
[ 4.168068] EXT3-fs (mmcblk0p2): recovery complete
[ 4.175572] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 4.182814] VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 4.189374] Freeing init memory: 240K
[ 4.194517] Failed to execute /init. Attempting defaults...
INIT: version 2.88 booting
Starting udev
[ 6.636309] EXT4-fs (mmcblk1p2): recovery complete
[ 6.641369] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
bootlogd.
ALSA: Restoring mixer settings...
Configuring network interfaces... [ 9.099412] net eth0: CPSW phy found : id is : 0x7c0f1
udhcpc (v1.20.2) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
done.
[ 18.242026] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[ 18.249818] rtc-pcf8563 2-0051: retrieved date/time is not valid.
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting Dropbear SSH server: dropbear.
Starting telnet daemon.
Performing wifi calibration...
rm: can't remove '/lib/firmware/ti-connectivity/wl1271-nvs.bin': No such file or directory
Error: Module wl12xx_sdio is not currently loaded
nl80211 not found.
[ 18.533514] Disabling lock debugging due to kernel taint
[ 18.553062] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[ 18.560816] rtc-pcf8563 2-0051: retrieved date/time is not valid.
Starting network benchmark server: netserver.
Starting syslogd/klogd: done
Starting thttpd.
[ 18.736879] ==========zhwx===fb_check_var===bpp is [32]
[ 18.736897] ==========zhwx===da8xxfb_set_par===bpp is [32]
[ 18.736904] ==========zhwx===da8xxfb_set_par===raster_order is [0]
[ 18.740915] ==========zhwx===lcd_init===bpp is [32]
[ 18.740932] ==========zhwx===lcd_cfg_frame_buffer===bpp is [32]
[ 18.779013] ==========zhwx===fb_check_var===bpp is [32]
[ 18.779032] ==========zhwx===da8xxfb_set_par===bpp is [32]
[ 18.779039] ==========zhwx===da8xxfb_set_par===raster_order is [0]
[ 18.788080] ==========zhwx===lcd_init===bpp is [32]
[ 18.788097] ==========zhwx===lcd_cfg_frame_buffer===bpp is [32]
Starting PVR
Starting Lighttpd Web Server: lighttpd.
2017-12-14 00:03:20: (log.c.166) server started
[ 19.410514] ==========zhwx===fb_check_var===bpp is [32]
[ 19.410530] ==========zhwx===da8xxfb_set_par===bpp is [32]
[ 19.410537] ==========zhwx===da8xxfb_set_par===raster_order is [0]
[ 19.427534] ==========zhwx===lcd_init===bpp is [32]
[ 19.427551] ==========zhwx===lcd_cfg_frame_buffer===bpp is [32]
/
Starting Matrix GUI application.
[ 21.494963] gadget: Mass Storage Function, version: 2009/09/11
[ 21.501187] gadget: Number of LUNs=1
[ 21.505058] lun0: LUN: removable file: /dev/mmcblk0p1
[ 21.510455] gadget: Mass Storage Gadget, version: 2009/09/11
[ 21.516490] gadget: userspace failed to provide iSerialNumber
[ 21.522599] gadget: g_mass_storage ready
[ 21.526810] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
[ 21.532394] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
[ 21.540233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 21.547345] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.554903] usb usb2: Product: MUSB HDRC host driver
[ 21.560092] usb usb2: Manufacturer: Linux 3.2.0 musb-hcd
[ 21.565648] usb usb2: SerialNumber: musb-hdrc.0
[ 21.570833] hub 2-0:1.0: USB hub found
[ 21.574789] hub 2-0:1.0: 1 port detected
***************************************************************
***************************************************************
NOTICE: This file system contains the followin GPLv3 packages:
binutils-symlinks
binutils
gdbserver
If you do not wish to distribute GPLv3 components please remove
the above packages prior to distribution. This can be done using
the opkg remove command. i.e.:
opkg remove
Where is the name printed in the list above
NOTE: If the package is a dependency of another package you
will be notified of the dependent packages. You should
use the --force-removal-of-dependent-packages option to
also remove the dependent packages as well
***************************************************************
***************************************************************
Stopping Bootlog daemon: bootlogd.
_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|
Arago Project http://arago-project.org am335x-evm ttyO0
Arago 2013.02 am335x-evm ttyO0
am335x-evm login: [ 72.270918] ti
Copyright (c) 2002-2014 NetSarang Computer, Inc. All rights reserved.
Type `help' to learn how to use Xshell prompt.
[C:\Users\zhwx]$
Connecting to COM3...
Connected.
U-Boot SPL 2011.09 (Aug 31 2015 - 16:46:38)
Chipsee AM335x EVM Board
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.09 (Aug 31 2015 - 16:46:38)
I2C: ready
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: HW ECC Hamming Code selected
No NAND device found!!!
0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment
Net: cpsw
Hit any key to stop autoboot: 0
SD/MMC found on device 0
reading uEnv.txt
200 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
reading uImage
3328672 bytes read
## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-3.2.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3328608 Bytes = 3.2 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 3.2.0 (zhwx@Myboot) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #2 Mon Aug 31 19:36:38 CST 2015
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: am335xevm
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] AM335X ES2.0 (sgx neon )
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyO0,115200n8 mem=512M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait rootdelay=1 init=/init ip=off
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 512840k/512840k available, 11448k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05eb000 (6028 kB)
[ 0.000000] .init : 0xc05eb000 - 0xc0627000 ( 240 kB)
[ 0.000000] .data : 0xc0628000 - 0xc0690b20 ( 419 kB)
[ 0.000000] .bss : 0xc0690b44 - 0xc06bfa24 ( 188 kB)
[ 0.000000] NR_IRQS:396
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER2 at 24000000 Hz
[ 0.000000] omap_dm_timer_switch_src: Switching to HW default clocksource(sys_clkin_ck) for timer1, this may impact timekeeping in low power state
[ 0.000000] OMAP clocksource: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000151] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.087753] pid_max: default: 32768 minimum: 301
[ 0.087850] Security Framework initialized
[ 0.087933] Mount-cache hash table entries: 512
[ 0.088238] CPU: Testing write buffer coherency: ok
[ 0.107547] omap_hwmod: pruss: failed to hardreset
[ 0.108460] print_constraints: dummy:
[ 0.108736] NET: Registered protocol family 16
[ 0.110370] OMAP GPIO hardware version 0.1
[ 0.112326] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.113804] omap_i2c.1: alias fck already exists
[ 0.114481] omap2_mcspi.1: alias fck already exists
[ 0.114650] omap2_mcspi.2: alias fck already exists
[ 0.115341] edma.0: alias fck already exists
[ 0.115357] edma.0: alias fck already exists
[ 0.115371] edma.0: alias fck already exists
[ 0.135575] bio: create slab
[ 0.137292] SCSI subsystem initialized
[ 0.138567] usbcore: registered new interface driver usbfs
[ 0.138799] usbcore: registered new interface driver hub
[ 0.138955] usbcore: registered new device driver usb
[ 0.139082] musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3
[ 0.139302] musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1
[ 0.140157] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz
[ 0.141102] tps65910 1-002d: could not be detected
[ 0.142100] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.142958] Switching to clocksource gp timer
[ 0.154574] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.154720] musb-hdrc musb-hdrc.0: dma type: pio
[ 0.154977] MUSB0 controller's USBSS revision = 4ea20800
[ 0.154995] musb0: Enabled SW babble control
[ 0.155505] musb-hdrc musb-hdrc.0: USB OTG mode controller at e083c000 using PIO, IRQ 18
[ 0.155627] musb-hdrc musb-hdrc.1: dma type: pio
[ 0.155872] MUSB1 controller's USBSS revision = 4ea20800
[ 0.155886] musb1: Enabled SW babble control
[ 0.156013] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 0.156072] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ 0.156178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.156191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.156201] usb usb1: Product: MUSB HDRC host driver
[ 0.156209] usb usb1: Manufacturer: Linux 3.2.0 musb-hcd
[ 0.156217] usb usb1: SerialNumber: musb-hdrc.1
[ 0.156857] hub 1-0:1.0: USB hub found
[ 0.156881] hub 1-0:1.0: 1 port detected
[ 0.157318] musb-hdrc musb-hdrc.1: USB Host mode controller at e083e800 using PIO, IRQ 19
[ 0.157642] NET: Registered protocol family 2
[ 0.157798] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.158043] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.158258] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.158383] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.158393] TCP reno registered
[ 0.158403] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.158420] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.158555] NET: Registered protocol family 1
[ 0.158754] RPC: Registered named UNIX socket transport module.
[ 0.158765] RPC: Registered udp transport module.
[ 0.158772] RPC: Registered tcp transport module.
[ 0.158779] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.158959] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.175798] VFS: Disk quotas dquot_6.5.2
[ 0.175855] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.176473] msgmni has been set to 1001
[ 0.178887] alg: No test for stdrng (krng)
[ 0.179432] io scheduler noop registered
[ 0.179443] io scheduler deadline registered
[ 0.179504] io scheduler cfq registered (default)
[ 0.180414] Could not set LED4 to fully on
[ 0.213809] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
[ 0.789007] console [ttyO0] enabled
[ 0.793145] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
[ 0.800838] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
[ 0.808530] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3
[ 0.816218] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4
[ 0.823907] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5
[ 0.831929] omap4_rng omap4_rng: OMAP4 Random Number Generator ver. 2.00
[ 0.846003] brd: module loaded
[ 0.852908] loop: module loaded
[ 0.856393] i2c-core: driver [tsl2550] using legacy suspend method
[ 0.862854] i2c-core: driver [tsl2550] using legacy resume method
[ 0.869288] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
[ 0.876575] The board is a Chipsee Beaglebone Black Expansion.
[ 0.883034] omap_hsmmc.0: alias fck already exists
[ 0.888447] omap_hsmmc.1: alias fck already exists
[ 0.894084] da8xx_lcdc.0: alias fck already exists
[ 0.899483] da8xx_lcdc da8xx_lcdc.0: GLCD: Found HJ070NA13A panel
[ 0.905881] ==========zhwx===fb_probe===bpp is [32]
[ 0.917399] ==========zhwx===fb_check_var===bpp is [32]
[ 0.922864] ==========zhwx===da8xxfb_set_par===bpp is [32]
[ 0.928608] ==========zhwx===da8xxfb_set_par===raster_order is [0]
[ 0.936072] ==========zhwx===lcd_init===bpp is [32]
[ 0.941176] ==========zhwx===lcd_cfg_frame_buffer===bpp is [32]
[ 0.947992] ==========zhwx===da8xxfb_set_par===bpp is [32]
[ 0.948001] ==========zhwx===da8xxfb_set_par===raster_order is [0]
[ 0.949005] ==========zhwx===lcd_init===bpp is [32]
[ 0.949018] ==========zhwx===lcd_cfg_frame_buffer===bpp is [32]
[ 0.958866] Console: switching to colour frame buffer device 128x37
[ 0.998809] omap_i2c.2: alias fck already exists
[ 1.004138] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 100 kHz
[ 1.011021] davinci-mcasp.0: alias fck already exists
[ 1.017260] d_can.0: alias fck already exists
[ 1.024600] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.031639] omap2-nand driver initializing
[ 1.036103] OneNAND driver initializing
[ 1.041084] CAN device driver interface
[ 1.045139] CAN bus driver for Bosch D_CAN controller 1.0
[ 1.051555] d_can d_can.0: device registered (irq=52, irq_obj=53)
[ 1.103009] davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
[ 1.109477] davinci_mdio davinci_mdio.0: detected phy mask fffffffe
[ 1.116628] davinci_mdio.0: probed
[ 1.120185] davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver SMSC LAN8710/LAN8720
[ 1.129004] usbcore: registered new interface driver zd1201
[ 1.135006] usbcore: registered new interface driver cdc_ether
[ 1.141216] usbcore: registered new interface driver cdc_eem
[ 1.147304] usbcore: registered new interface driver dm9601
[ 1.153178] cdc_ncm: 04-Aug-2011
[ 1.156675] usbcore: registered new interface driver cdc_ncm
[ 1.162589] Initializing USB Mass Storage driver...
[ 1.167866] usbcore: registered new interface driver usb-storage
[ 1.174160] USB Mass Storage support registered.
[ 1.179336] mousedev: PS/2 mouse device common for all mice
[ 1.185782] ft5x06_ts 2-0038: failed to probe FT5X0X touchscreen device
[ 1.193294] input: ti-tsc as /devices/platform/omap/ti_tscadc/tsc/input/input0
[ 1.201596] rtc-pcf8563 2-0051: chip found, driver version 0.4.3
[ 1.209465] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[ 1.217212] rtc-pcf8563 2-0051: retrieved date/time is not valid.
[ 1.223882] rtc-pcf8563 2-0051: rtc core: registered rtc-pcf8563 as rtc0
[ 1.230999] i2c /dev entries driver
[ 1.235131] Linux video capture interface: v2.00
[ 1.240206] usbcore: registered new interface driver uvcvideo
[ 1.246231] USB Video Class driver (1.1.1)
[ 1.523793] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.530284] _regulator_get: deviceless supply vdd_mpu not found, using dummy regulator
[ 1.538930] cpuidle: using governor ladder
[ 1.543634] cpuidle: using governor menu
[ 1.551511] omap4_aes_mod_init: loading AM33X AES driver
[ 1.557195] omap4-aes omap4-aes: AM33X AES hw accel rev: 3.02
[ 1.563849] omap4_aes_probe: probe() done
[ 1.568223] omap4_sham_mod_init: loading AM33X SHA/MD5 driver
[ 1.574357] omap4-sham omap4-sham: AM33X SHA/MD5 hw accel rev: 4.03
[ 1.587891] omap4_sham_probe: probe() done
[ 1.597247] usbcore: registered new interface driver usbhid
[ 1.603095] usbhid: USB HID core driver
[ 1.607617] tiadc tiadc: attached adc driver
[ 1.612670] usbcore: registered new interface driver snd-usb-audio
[ 1.620670] _regulator_get: 2-001b supply IOVDD not found, using dummy regulator
[ 1.628487] _regulator_get: 2-001b supply DVDD not found, using dummy regulator
[ 1.636169] _regulator_get: 2-001b supply AVDD not found, using dummy regulator
[ 1.643853] _regulator_get: 2-001b supply DRVDD not found, using dummy regulator
[ 1.653661] asoc: tlv320aic3x-hifi <-> davinci-mcasp.0 mapping ok
[ 1.661085] ALSA device list:
[ 1.664223] #0: AM335X EVM
[ 1.667229] oprofile: hardware counters not available
[ 1.672504] oprofile: using timer interrupt.
[ 1.676993] nf_conntrack version 0.5.0 (8013 buckets, 32052 max)
[ 1.683738] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.689383] TCP cubic registered
[ 1.692756] NET: Registered protocol family 17
[ 1.697441] can: controller area network core (rev 20090105 abi 8)
[ 1.703988] NET: Registered protocol family 29
[ 1.708648] can: raw protocol (rev 20090105)
[ 1.713121] can: broadcast manager protocol (rev 20090105 t)
[ 1.719065] Registering the dns_resolver key type
[ 1.724048] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 1.732061] ThumbEE CPU extension supported.
[ 1.736591] mux: Failed to setup hwmod io irq -22
[ 1.742043] Power Management for AM33XX family
[ 1.746901] Trying to load am335x-pm-firmware.bin (60 secs timeout)
[ 1.753595] Copied the M3 firmware to UMEM
[ 1.757948] Cortex M3 Firmware Version = 0x18
[ 1.763067] sr_init: platform driver register failed
[ 1.771019] clock: disabling unused clocks to save power
[ 1.785936] Detected MACID=6c:ec:eb:a5:96:7f
[ 1.791241] cpsw: Detected MACID = 6c:ec:eb:a5:98:81
[ 1.798936] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[ 1.806705] rtc-pcf8563 2-0051: retrieved date/time is not valid.
[ 1.813087] rtc-pcf8563 2-0051: hctosys: invalid date/time
[ 1.819101] Waiting 1sec before mounting root device...
[ 1.834306] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 1.847031] mmc0: new high speed SDHC card at address aaaa
[ 1.853315] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
[ 1.859758] mmcblk0: p1 p2
[ 1.950531] mmc1: new high speed MMC card at address 0001
[ 1.956650] mmcblk1: mmc1:0001 MMC04G 3.60 GiB
[ 1.961482] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[ 1.967829] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[ 1.975102] mmcblk1: p1 p2
[ 1.979779] mmcblk1boot1: unknown partition table
[ 1.986211] mmcblk1boot0: unknown partition table
[ 4.153600] kjournald starting. Commit interval 5 seconds
[ 4.162583] EXT3-fs (mmcblk0p2): using internal journal
[ 4.168068] EXT3-fs (mmcblk0p2): recovery complete
[ 4.175572] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 4.182814] VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 4.189374] Freeing init memory: 240K
[ 4.194517] Failed to execute /init. Attempting defaults...
INIT: version 2.88 booting
Starting udev
[ 6.636309] EXT4-fs (mmcblk1p2): recovery complete
[ 6.641369] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
bootlogd.
ALSA: Restoring mixer settings...
Configuring network interfaces... [ 9.099412] net eth0: CPSW phy found : id is : 0x7c0f1
udhcpc (v1.20.2) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
done.
[ 18.242026] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[ 18.249818] rtc-pcf8563 2-0051: retrieved date/time is not valid.
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting Dropbear SSH server: dropbear.
Starting telnet daemon.
Performing wifi calibration...
rm: can't remove '/lib/firmware/ti-connectivity/wl1271-nvs.bin': No such file or directory
Error: Module wl12xx_sdio is not currently loaded
nl80211 not found.
[ 18.533514] Disabling lock debugging due to kernel taint
[ 18.553062] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[ 18.560816] rtc-pcf8563 2-0051: retrieved date/time is not valid.
Starting network benchmark server: netserver.
Starting syslogd/klogd: done
Starting thttpd.
[ 18.736879] ==========zhwx===fb_check_var===bpp is [32]
[ 18.736897] ==========zhwx===da8xxfb_set_par===bpp is [32]
[ 18.736904] ==========zhwx===da8xxfb_set_par===raster_order is [0]
[ 18.740915] ==========zhwx===lcd_init===bpp is [32]
[ 18.740932] ==========zhwx===lcd_cfg_frame_buffer===bpp is [32]
[ 18.779013] ==========zhwx===fb_check_var===bpp is [32]
[ 18.779032] ==========zhwx===da8xxfb_set_par===bpp is [32]
[ 18.779039] ==========zhwx===da8xxfb_set_par===raster_order is [0]
[ 18.788080] ==========zhwx===lcd_init===bpp is [32]
[ 18.788097] ==========zhwx===lcd_cfg_frame_buffer===bpp is [32]
Starting PVR
Starting Lighttpd Web Server: lighttpd.
2017-12-14 00:03:20: (log.c.166) server started
[ 19.410514] ==========zhwx===fb_check_var===bpp is [32]
[ 19.410530] ==========zhwx===da8xxfb_set_par===bpp is [32]
[ 19.410537] ==========zhwx===da8xxfb_set_par===raster_order is [0]
[ 19.427534] ==========zhwx===lcd_init===bpp is [32]
[ 19.427551] ==========zhwx===lcd_cfg_frame_buffer===bpp is [32]
/
Starting Matrix GUI application.
[ 21.494963] gadget: Mass Storage Function, version: 2009/09/11
[ 21.501187] gadget: Number of LUNs=1
[ 21.505058] lun0: LUN: removable file: /dev/mmcblk0p1
[ 21.510455] gadget: Mass Storage Gadget, version: 2009/09/11
[ 21.516490] gadget: userspace failed to provide iSerialNumber
[ 21.522599] gadget: g_mass_storage ready
[ 21.526810] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
[ 21.532394] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
[ 21.540233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 21.547345] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.554903] usb usb2: Product: MUSB HDRC host driver
[ 21.560092] usb usb2: Manufacturer: Linux 3.2.0 musb-hcd
[ 21.565648] usb usb2: SerialNumber: musb-hdrc.0
[ 21.570833] hub 2-0:1.0: USB hub found
[ 21.574789] hub 2-0:1.0: 1 port detected
***************************************************************
***************************************************************
NOTICE: This file system contains the followin GPLv3 packages:
binutils-symlinks
binutils
gdbserver
If you do not wish to distribute GPLv3 components please remove
the above packages prior to distribution. This can be done using
the opkg remove command. i.e.:
opkg remove
Where
NOTE: If the package is a dependency of another package you
will be notified of the dependent packages. You should
use the --force-removal-of-dependent-packages option to
also remove the dependent packages as well
***************************************************************
***************************************************************
Stopping Bootlog daemon: bootlogd.
_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|
Arago Project http://arago-project.org am335x-evm ttyO0
Arago 2013.02 am335x-evm ttyO0
am335x-evm login: [ 72.270918] ti