HCL 2个交换机堆叠使用双线堆叠

2个交换机，使用双线堆叠
交换机的四个堆叠口，双线堆叠，要么用49 50 俩个口，要么用51 52俩个口，使用50 51 俩个口是不行的

交换机一：

sys
[H3C]irf member 1 priority 5
[H3C]interface Ten-GigabitEthernet 1/0/49
[H3C-Ten-GigabitEthernet1/0/49]shutdown
[H3C-Ten-GigabitEthernet1/0/49]interface Ten-GigabitEthernet 1/0/50
[H3C-Ten-GigabitEthernet1/0/50]shutdown
[H3C-Ten-GigabitEthernet1/0/50]quit
[H3C]irf-port 1/2
[H3C-irf-port1/2]port group interface Ten-GigabitEthernet 1/0/49
[H3C-irf-port1/2]port group interface Ten-GigabitEthernet 1/0/50
[H3C-irf-port1/2]quit
[H3C]interface Ten-GigabitEthernet 1/0/49
[H3C-Ten-GigabitEthernet1/0/49]undo shutdown
[H3C-Ten-GigabitEthernet1/0/49]interface Ten-GigabitEthernet 1/0/50
[H3C-Ten-GigabitEthernet1/0/50]undo shutdown
[H3C-Ten-GigabitEthernet1/0/50]quit
[H3C]save
[H3C]irf-port-configuration active
[H3C]display irf
MemberID    Role    Priority  CPU-Mac         Description
 *+1        Master  5         28be-3424-0104  ---
--------------------------------------------------
 * indicates the device is the master.
 + indicates the device through which the user logs in.

交换机二：

Press ENTER to get started.
%Aug  8 09:04:50:929 2018 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0.

sys
[H3C]irf member 1 renumber 2
Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y
[H3C]quit
reboot
Press ENTER to get started.
%Aug  8 09:07:17:161 2018 H3C SHELL/5/SHELL_LOGIN: Console logged in from con1.

sys
[H3C]display irf
MemberID    Role    Priority  CPU-Mac         Description
 *+2        Master  1         28be-3dcf-0204  ---
--------------------------------------------------
 * indicates the device is the master.
 + indicates the device through which the user logs in.
[H3C]interface Ten-GigabitEthernet 2/0/49
[H3C-Ten-GigabitEthernet2/0/49]shutdown
[H3C-Ten-GigabitEthernet2/0/49]quit
[H3C]interface Ten-GigabitEthernet 2/0/50
[H3C-Ten-GigabitEthernet2/0/50]shut
[H3C-Ten-GigabitEthernet2/0/50]shutdown
[H3C-Ten-GigabitEthernet2/0/50]quit
[H3C]irf-port 2/1
[H3C-irf-port2/1]port group interface Ten-GigabitEthernet 2/0/49
You must perform the following tasks for a successful IRF setup:
Save the configuration after completing IRF configuration.
Execute the "irf-port-configuration active" command to activate the IRF ports.
[H3C-irf-port2/1]port group interface Ten-GigabitEthernet 2/0/50
[H3C-irf-port2/1]quit
[H3C]interface Ten-GigabitEthernet 2/0/49
[H3C-Ten-GigabitEthernet2/0/49]undo shutdown
[H3C-Ten-GigabitEthernet2/0/49]interface Ten-GigabitEthernet 2/0/50
[H3C-Ten-GigabitEthernet2/0/50]undo shutdown
[H3C-Ten-GigabitEthernet2/0/50]quit
[H3C]save
[H3C]irf-port-configuration active

进入交换机1，dis irf link 可以看到结果是正确的

[H3C]display irf link
Member 1
 IRF Port  Interface                             Status
 1         disable                               --
 2         Ten-GigabitEthernet1/0/49             UP
           Ten-GigabitEthernet1/0/50             UP
Member 2
 IRF Port  Interface                             Status
 1         Ten-GigabitEthernet2/0/49             UP
           Ten-GigabitEthernet2/0/50             UP
 2         disable                               --

[H3C]dis irf
MemberID    Role    Priority  CPU-Mac         Description
 *+1        Master  5         28be-3424-0104  ---
   2        Standby 1         28be-3dcf-0204  ---
--------------------------------------------------
 * indicates the device is the master.
 + indicates the device through which the user logs in.

 The bridge MAC of the IRF is: 28be-3424-0100
 Auto upgrade                : yes
 Mac persistent              : 6 min
 Domain ID                   : 0