jslinux-network

阅读更多

git clone https://github.com/killinux/jslinux-network

把 jslinux-network 放在apache或者nginx中。

yum install python-virtualenv

virtualenv mysite

source mysite/bin/activate

pip install mod_pywebsocket

cd jslinux-network/websocketstuntap

这里需要tap_wsh.py

python -m mod_pywebsocket.standalone -d . --log-level=info -p 3000

或launch.sh

这时，ifconfig

假设本机IP是192.168.139.85
vim network-websockets.js
第7行改成

tuntapWS_connection = new WebSocket('ws://192.168.139.85:3000/tap', []);

chrome：
http://192.168.137.85/jslinux-network

先点boot
启动后，点connect or reconnect websockets启动websocket
chrome变黄色

这时观察后台launch.sh会建立个链接一个连接

(mysite)[root@centos32 websocketstuntap]# ./launch.sh 
[2016-05-30 10:54:50,203] [INFO] __main__.WebSocketServer: Create socket on: (10, 1, '', '', '')
[2016-05-30 10:54:50,204] [INFO] __main__.WebSocketServer: Create socket on: (2, 1, '', '', '')
[2016-05-30 10:54:50,204] [INFO] __main__.WebSocketServer: Bind on: (10, 1, '', '', '')
[2016-05-30 10:54:50,205] [INFO] __main__.WebSocketServer: Bind on: (2, 1, '', '', '')
[2016-05-30 10:54:50,205] [INFO] __main__.WebSocketServer: Listen on: (10, 1, '', '', '')
[2016-05-30 10:54:50,205] [INFO] __main__.WebSocketServer: Listen on: (2, 1, '', '', '')
[2016-05-30 10:54:50,205] [INFO] __main__.WebSocketServer: Skip by failure: error(98, 'Address already in use')
[2016-05-30 10:56:23,729] [INFO] mod_pywebsocket.handshake: Established (RFC 6455 protocol)
tuntapdevice: websockettuntap

ifconfig观察服务器会多个tap设备

websockettuntap: flags=4163  mtu 1500
        inet 10.0.2.1  netmask 255.0.0.0  broadcast 10.255.255.255
        inet6 fe80::d894:8ff:fec0:b547  prefixlen 64  scopeid 0x20
        ether da:94:08:c0:b5:47  txqueuelen 500  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@centos32 linuxstart-20120111]# 

默认IP是10.0.2.1

进入jslinux后
cat /dev/clipboard|sh
生成tap设备

默认的ip是10.0.2.2
ping 10.0.2.1
能ping通表示正常


如果是自己编译的内核
需要注意.config文件一定要多一条
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y

否则jslinux在建立tap设备的时候会说找不到设备的问题


chrome://appcache-internals/
可以看到浏览器的cache


如果想把120M的镜像放在这里
需要改
jslinux.js里面的

197     //params.hda = { url: "hda%d.bin", block_size: 64, nb_blocks: 912 };
198     params.hda = { url: "hda%d.bin", block_size: 64, nb_blocks: 2000 };

否则会报
attempt to access beyond end of device
的错误

• config.4.0.3.jpeg (95.8 KB)
• 下载次数: 1

• config.4.0.3.jpeg (95.8 KB)
• 下载次数: 1