使用kubeadm工具箱创建kubernetes1.9集群

使用kubeadm工具箱创建kubernetes集群

  • https://kubernetes.io/docs/setup/independent/install-kubeadm

安装kubeadm

  • 环境准备:CentOS 7 16G Memory 16 CPUs (笔者服务器配置)

  • 每个节点的唯一主机名,MAC地址和product_uuid

  • 必须禁用swap为了使kubelet正常工作

swapoff 
# 修改/ets/fatab,注释swap的挂载配置/重要
  • 验证每个节点的MAC地址和product_uuid是唯一的
# 可以使用命令下面检查product_uuid:
sudo cat /sys/class/dmi/id/product_uuid
  • 检查网络适配器

如果您有多个网络适配器,并且您的Kubernetes组件在默认路由上无法访问,我们建议您添加IP路由,以便Kubernetes集群地址通过适当的适配器

  • 检查所需端口

Master node(s)

Protocol Direction Port Range Purpose
TCP Inbound 6443* Kubernetes API server
TCP Inbound 2379-2380 etcd server client API
TCP Inbound 10250 Kubelet API
TCP Inbound 10251 kube-scheduler
TCP Inbound 10252 kube-controller-manager
TCP Inbound 10255 Read-only Kubelet API

Worker node(s)

Protocol Direction Port Range Purpose
TCP Inbound 10250 Kubelet API
TCP Inbound 10255 Read-only Kubelet API
TCP Inbound 30000-32767 NodePort Services**

默认的端口范围:https://kubernetes.io/docs/concepts/services-networking/service/

安装Docker

参考:http://blog.csdn.net/wh211212/article/details/78662605
Docker官方安装:https://docs.docker.com/engine/installation/

yum install -y docker
systemctl enable docker && systemctl start docker
# 不建议使用官网的docker-ce版本、支持性不是很好、使用epel源支持的docker即可
[root@aniu-k8s ~]# docker version
Client:
 Version:         1.12.6
 API version:     1.24
 Package version: docker-1.12.6-68.gitec8512b.el7.centos.x86_64
 Go version:      go1.8.3
 Git commit:      ec8512b/1.12.6
 Built:           Mon Dec 11 16:08:42 2017
 OS/Arch:         linux/amd64

Server:
 Version:         1.12.6
 API version:     1.24
 Package version: docker-1.12.6-68.gitec8512b.el7.centos.x86_64
 Go version:      go1.8.3
 Git commit:      ec8512b/1.12.6
 Built:           Mon Dec 11 16:08:42 2017
 OS/Arch:         linux/amd64

在每台机器上安装Docker。建议使用v1.12版本,但v1.11,v1.13和17.03版本也是可以的。版本17.06+可能有效,但尚未经过Kubernetes节点团队的测试和验证。

请以root身份根据您的操作系统执行以下命令。通过SSH连接到每个主机后,您可以通过执行sudo -i成为root用户

  • 确保kubelet使用的cgroup驱动程序与Docker使用的相同。为了确保兼容性,您可以更新Docker,如下所示:
cat << EOF > /etc/docker/daemon.json
{
  "exec-opts": ["native.cgroupdriver=systemd"]
}
EOF
# 这里使用官网配置启动docker报错/启用使用默认配置

安装kubeadm, kubelet and kubectl

  • kubeadm:引导群集的命令

  • kubelet:运行在集群中所有机器上的组件,并执行诸如启动pods和容器的组件。

  • kubectl: 与集群交互

  • 配置官方kubernetes源:

cat < /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
EOF
  • 配置国内kubernetes源
# cat > /etc/yum.repo.d/kubernetes.repo <

禁用SELinux并关闭防火墙

sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config # 需重启
setenforce 0
#关闭防火墙 
systemctl stop firewalld && systemctl disable firewalld

RHEL / CentOS 7上的某些用户报告了由于iptables被绕过而导致流量被错误路由的问题。应该确保net.bridge.bridge-nf-call-iptables的sysctl配置中被设置为1,例如

cat <  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system
  • 安装kubelet kubeadm kubectl
[root@aniu-k8s ~]# yum install -y kubelet kubeadm kubectl
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.163.com
 * epel: mirrors.tongji.edu.cn
 * 
 extras: mirrors.163.com
 * updates: mirrors.163.com
Package kubelet-1.9.2-0.x86_64 already installed and latest version
Package kubeadm-1.9.2-0.x86_64 already installed and latest version
Package kubectl-1.9.2-0.x86_64 already installed and latest version
Nothing to do

# systemctl enable kubelet && systemctl start kubelet
  • 初始化kubeadm,否则启动kubelet报证书错误
[root@aniu-k8s ~]# kubeadm init --kubernetes-version=v1.9.2
[init] Using Kubernetes version: v1.9.2
[init] Using Authorization modes: [Node RBAC]
[preflight] Running pre-flight checks.
        [WARNING FileExisting-crictl]: crictl not found in system path
[preflight] Starting the kubelet service
[certificates] Generated ca certificate and key.
[certificates] Generated apiserver certificate and key.
[certificates] apiserver serving cert is signed for DNS names [aniu-k8s kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.10.10]
[certificates] Generated apiserver-kubelet-client certificate and key.
[certificates] Generated sa key and public key.
[certificates] Generated front-proxy-ca certificate and key.
[certificates] Generated front-proxy-client certificate and key.
[certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "scheduler.conf"
[controlplane] Wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml"
[controlplane] Wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml"
[controlplane] Wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml"
[etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml"
[init] Waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests".
[init] This might take a minute or longer if the control plane images have to be pulled.
[apiclient] All control plane components are healthy after 75.502276 seconds
[uploadconfig] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[markmaster] Will mark node aniu-k8s as master by adding a label and a taint
[markmaster] Master aniu-k8s tainted and labelled with key/value: node-role.kubernetes.io/master=""
[bootstraptoken] Using token: d9b013.26c2f690632cbef9
[bootstraptoken] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstraptoken] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: kube-dns
[addons] Applied essential addon: kube-proxy

Your Kubernetes master has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of machines by running the following on each node
as root:

  kubeadm join --token d9b013.26c2f690632cbef9 192.168.10.10:6443 --discovery-token-ca-cert-hash sha256:887a2ea3fccca1dec2caa12ad2e54f5baf806f29becf548a3b098ee3a869b518

使用kubeadm创建群集

参考:https://kubernetes.io/docs/setup/independent/create-cluster-kubeadm/

kubeadm是一个工具包,可帮助您以简单,合理安全和可扩展的方式引导最佳实践Kubernetes群集。它还支持为您管理Bootstrap令牌并升级/降级群集。

它在设计上并不为您安装网络解决方案,这意味着您必须使用kubectl apply自行安装第三方符合CNI的网络解决方案

  • 初始化master
[root@aniu-k8s ~]# kubeadm init --kubernetes-version=v1.9.2

要让kubectl为非root用户工作,您可能需要运行以下命令(这也是kubeadm init输出的一部分):

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
  • 查看集群状态
[root@aniu-k8s ~]# kubectl get cs
NAME                 STATUS    MESSAGE              ERROR
controller-manager   Healthy   ok                   
scheduler            Healthy   ok                   
etcd-0               Healthy   {"health": "true"} 

安装pod network

仅在Master节点执行,网络必须在任何应用程序之前部署。而且,kube-dns是一个内部帮助服务,在安装网络之前不会启动。 kubeadm仅支持基于容器网络接口(CNI)的网络(并且不支持kubenet)

  • 安装Flannel
# 将桥接的IPv4流量传递给iptables的链
sysctl net.bridge.bridge-nf-call-iptables=1
#
[root@aniu-k8s ~]# kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/v0.9.1/Documentation/kube-flannel.yml
# kubectl apply -f   https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
clusterrole "flannel" created
clusterrolebinding "flannel" created
serviceaccount "flannel" created
configmap "kube-flannel-cfg" created
daemonset "kube-flannel-ds" created

一旦安装了pod网络,就可以通过在kubectl get pods --all-namespaces的输出中检查kube-dns pod是否正在运行来确认它正在工作。 一旦kube-dns吊舱启动并运行,您可以继续加入您的节点

[root@aniu-k8s ~]# kubectl get pods --all-namespaces
NAMESPACE     NAME                               READY     STATUS              RESTARTS   AGE
kube-system   etcd-aniu-k8s                      1/1       Running             0          1h
kube-system   kube-apiserver-aniu-k8s            1/1       Running             0          1h
kube-system   kube-controller-manager-aniu-k8s   1/1       Running             0          1h
kube-system   kube-dns-6f4fd4bdf-2428k           0/3       ContainerCreating   0          1h
kube-system   kube-flannel-ds-2h2c6              0/1       CrashLoopBackOff    3          1m
kube-system   kube-proxy-wt74z                   1/1       Running             0          1h
kube-system   kube-scheduler-aniu-k8s            1/1       Running             0          1h
  • 注意:笔者安装pod network采用flannel有问题,故换成Weave Net
export kubever=$(kubectl version | base64 | tr -d '\n')
kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$kubever"
  • Master Isolation

使用kubeadm初始化的集群,出于安全考虑Pod不会被调度到Master Node上,可使用如下命令使Master节点参与工作负载。:

[root@aniu-k8s ~]# kubectl taint nodes --all node-role.kubernetes.io/master-
node "aniu-k8s" untainted
  • 查看节点状态
[root@aniu-k8s ~]# kubectl get pod --all-namespaces -o wide
NAMESPACE     NAME                                    READY     STATUS    RESTARTS   AGE       IP              NODE
kube-system   etcd-aniu-k8s                           1/1       Running   0          49m       192.168.10.10   aniu-k8s
kube-system   kube-apiserver-aniu-k8s                 1/1       Running   0          49m       192.168.10.10   aniu-k8s
kube-system   kube-controller-manager-aniu-k8s        1/1       Running   0          49m       192.168.10.10   aniu-k8s
kube-system   kube-dns-6f4fd4bdf-n4ctn                3/3       Running   0          50m       10.32.0.2       aniu-k8s
kube-system   kube-proxy-s5pnl                        1/1       Running   0          47m       192.168.0.209   aniu-saas-4
kube-system   kube-proxy-szs7k                        1/1       Running   0          50m       192.168.10.10   aniu-k8s
kube-system   kube-scheduler-aniu-k8s                 1/1       Running   0          49m       192.168.10.10   aniu-k8s
kube-system   weave-net-bkbs2                         2/2       Running   0          49m       192.168.10.10   aniu-k8s
kube-system   weave-net-cwvdk                         2/2       Running   0          47m       192.168.0.209   aniu-saas-4
# 可以看到全部的pod已经全部running
  • 向K8s集群中加入节点

节点是工作负载(containers and pods)运行的地方。要将新节点添加到群集,请为每台机器执行以下操作:

# 节点需要安装 yum install -y kubelet kubeadm kubectl

[root@aniu-saas-4 ~]# kubeadm join --token dc2313.9e3daddc83109625 192.168.10.10:6443 --discovery-token-ca-cert-hash sha256:8fe62dea8e88ff957dcd712f3c5948cc43f940abb3f34e8823576434d216ed5a
[preflight] Running pre-flight checks.
        [WARNING FileExisting-crictl]: crictl not found in system path
[preflight] Starting the kubelet service
[discovery] Trying to connect to API Server "192.168.10.10:6443"
[discovery] Created cluster-info discovery client, requesting info from "https://192.168.10.10:6443"
[discovery] Requesting info from "https://192.168.10.10:6443" again to validate TLS against the pinned public key
[discovery] Cluster info signature and contents are valid and TLS certificate validates against pinned roots, will use API Server "192.168.10.10:6443"
[discovery] Successfully established connection with API Server "192.168.10.10:6443"

This node has joined the cluster:
* Certificate signing request was sent to master and a response
  was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the master to see this node join the cluster.

  • 查看节点信息
[root@aniu-k8s ~]# kubectl get nodes
NAME          STATUS     ROLES     AGE       VERSION
aniu-k8s      Ready      master    1h        v1.9.2
aniu-saas-4   NotReady       17s       v1.9.2
  • 从其他机器或者笔记本终端操作集群
scp root@:/etc/kubernetes/admin.conf .
kubectl --kubeconfig ./admin.conf get nodes
  • 将API服务器代理到本地主机
scp root@:/etc/kubernetes/admin.conf .
kubectl --kubeconfig ./admin.conf proxy
  • 删除Kubernetes集群节点
kubectl drain  --delete-local-data --force --ignore-daemonsets
kubectl delete node 

注意事项

  • 如果kubeadm出错,修改完成之后需要 kubeadm reset在重启初始化
  • 官网文档只有修改docker配置哪一步,笔者没有操作,其他步骤和官网一致

错误

  • 查看系统日志仍存在相关错误:
# 
Error adding network: open /run/flannel/subnet.env: no such file or directory
#
oci-systemd-hook[12470]: systemdhook : Skipping as container command is /pause, not init or systemd
# 后面继续学习排查故障
  

部署Dashboard插件

  • 下载Dashboard配置文件
mkdir ~/k8s
cd ~/k8s
wget https://raw.githubusercontent.com/kubernetes/dashboard/master/src/deploy/recommended/kubernetes-dashboard.yaml
  • 修改Dashboard Service,编辑kubernetes-dashboard.yaml文件,在Dashboard Service中添加type: NodePort,暴露Dashboard服务
# ------------------- Dashboard Service ------------------- #

kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kube-system
spec:
  type: NodePort # 添加
  ports:
    - port: 443
      targetPort: 8443
  selector:
    k8s-app: kubernetes-dashboard
  • 安装Dashboard插件
[root@aniu-k8s k8s]# kubectl create -f kubernetes-dashboard.yaml 
secret "kubernetes-dashboard-certs" created
serviceaccount "kubernetes-dashboard" created
role "kubernetes-dashboard-minimal" created
rolebinding "kubernetes-dashboard-minimal" created
deployment "kubernetes-dashboard" created
service "kubernetes-dashboard" created
  • Dashboard账户集群管理权限

创建一个kubernetes-dashboard-admin的ServiceAccount并授予集群admin的权限,创建kubernetes-dashboard-admin.rbac.yaml

---
apiVersion: v1
kind: ServiceAccount
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-admin
  namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:
  name: kubernetes-dashboard-admin
  labels:
    k8s-app: kubernetes-dashboard
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin
subjects:
- kind: ServiceAccount
  name: kubernetes-dashboard-admin
  namespace: kube-system

执行命令:

[root@aniu-k8s ~]#  kubectl create -f kubernetes-dashboard-admin.rbac.yaml
serviceaccount "kubernetes-dashboard-admin" created
clusterrolebinding "kubernetes-dashboard-admin" created
  • 查看kubernete-dashboard-admin的token
[root@aniu-k8s ~]# kubectl -n kube-system get secret | grep kubernetes-dashboard-admin
kubernetes-dashboard-admin-token-c9sq2           kubernetes.io/service-account-token   3         12s
[root@aniu-k8s ~]# kubectl describe -n kube-system secret/kubernetes-dashboard-admin-token-c9sq2
Name:         kubernetes-dashboard-admin-token-c9sq2
Namespace:    kube-system
Labels:       
Annotations:  kubernetes.io/service-account.name=kubernetes-dashboard-admin
              kubernetes.io/service-account.uid=04821fef-061f-11e8-a2bc-d4ae528a3fba

Type:  kubernetes.io/service-account-token

Data
====
ca.crt:     1025 bytes
namespace:  11 bytes
token:      eyJhbGciOiJSUzI1NiIsInR5cCI6IkpXVCJ9.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.csPOFxpLHxj-btcmUpOEUFO4MgL5wVL_lSuECALt9aLlb6x72lBRIQZfXnu8MbchhUlDBEX-i4dNU6_nyTKTokbiLwtCbKM12g7wG44aw1c-RjmFRvVxe9tMjjQXEN4ZExHoqtrcU5qTHrXo9qQOy5fyPBc6rbnS7YuPwp6tpofMO9WHdHCp0PejveAKSk6V6f-rPCZuh6ScfCYNF9ytLW-SGY4Kly9DXPR1AYgSdi7y1pu61iqWPgWUMqCzd5qsQ8ml4avOgK-jM-StqoG5_Rftk0sCVoVqfiN4toQhoC28_9TGBu0IKPiM-e1Fo6J4bZ8MrDULHnzs8lMWz1c0lQ

  • 查看Dashboard服务端口
[root@aniu-k8s ~]# kubectl get svc -n kube-system
NAME                   TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)         AGE
kube-dns               ClusterIP   10.96.0.10             53/UDP,53/TCP   14h
kubernetes-dashboard   NodePort    10.96.219.54           443:30760/TCP   2m

参考链接

  • https://www.centos.bz/2017/12/%E4%BD%BF%E7%94%A8kubeadm%E5%9C%A8centos-7%E4%B8%8A%E5%AE%89%E8%A3%85kubernetes-1-8/
  • https://kubernetes.io/docs/setup/independent/create-cluster-kubeadm/
  • https://github.com/kubernetes/dashboard/wiki/Installation

你可能感兴趣的:(使用kubeadm工具箱创建kubernetes1.9集群)