今天偶然想做FLEX里鼠标右键弹出菜单,但其实是很麻烦的,因为忘记了FLASH自己是有个鼠标右键菜单的,所以还是不动为秒,

但如果实在要动的话,也可以,转载之:

1.如果你是Desktop Application
监听事件的MouseEvent.RIGHT_CLICK事件
比如对某个控件a进行监控右键点击事件
a.addEventListener(MouseEvent.RIGHT_CLICK,func);
鼠标的其他事件也可以监听，具体见http://livedocs.adobe.com/flex/3_cn/langref/flash/events/MouseEvent.html
2.如果是Web Appliction（麻烦了！）
其基本思路为:

1,在FLEX中利用外部接口注册一个函数, 作为接收外部(HTML)右键事件的入口
2,在FLEX应用所在的HTML中拦截鼠标右键事件,调用FLEX外部函数,并取消事件的广播,以阻止事件到达FLEX应用.
3,在FLEX应用程序上监听mouseOver事件,并记录当前鼠标所在对象
4,当入口函数接收到HTML发送的右键事件后,模拟生成一个鼠标右键事件(buttonDown = false), 并发送到当前对象
5,在对象的mouseDown处理函数中,根据buttonDown的标志,分别处理鼠标左右键事件


这个思路比较清晰可行, 鼠标右键事件的流程为:

HTML鼠标右键事件----FLEX外部函数-----模拟的鼠标右键事件------相应的处理函数

具体的实现为:

1, 在FLEX所在的HTML增加


2, 修改FLEX的MXML



private var mouseTarget:DisplayObject;
function init()
{
ExternalInterface.addCallback("openRightClick", openRightClick);
}


function getMouseTarget(event:MenuEvent):void
{
mouseTarget = DisplayObject(event.target);
}

function openRightClick():void
{
var e:MouseEvent = new MouseEvent(MouseEvent.MOUSE_DOWN, true, false, mouseTarget.mouseX, mouseTarget.mouseY);
mouseTarget.dispatchEvent(e);
}

function showMouseEvent(event)
{
if(event.buttonDown == true)
Alert.show("Left");
else
Alert.show("Right");
}





在修改完后,满怀信心的进行测试,结果右键菜单还能够出现!试了很多办法也不行,幸亏我的同事赵辉发现了解决方法,在这里向他表示感谢!

具体的方法就是修改wmode参数, 将wmode设置为opaque或transparent都可以达到这个效果
AC_FL_RunContent(
"src", "playerProductInstall",
"FlashVars", "MMredirectURL="+MMredirectURL+'&MMplayerType='+MMPlayerType+'&MMdoctitle='+MMdoctitle+"",
"width", "100%",
"height", "100%",
"align", "middle",
"id", "FlexTest",
"wmode", "opaque", //////////////////////注意:这里是关键
"quality", "high",
"bgcolor", "#869ca7",
"name", "FlexTest",
"allowScriptAccess","sameDomain",
"type", "application/x-shockwave-flash",
"pluginspage", "http://www.adobe.com/go/getflashplayer"
);

ADOBE文档中对wmode的解释:
Sets the Window Mode property of the SWF file for transparency, layering, and positioning in the browser. Valid values of wmode are window, opaque, and transparent.

Set to window to play the SWF in its own rectangular window on a web page.

Set to opaque to hide everything on the page behind it.

Set to transparent so that the background of the HTML page shows through all transparent portions of the SWF file. This can slow animation performance.

To make sections of your SWF file transparent, you must set the alpha property to 0. To make your application's background transparent, set the alpha property on the tag to 0.

The wmode property is not supported in all browsers and platforms.