postfix文档修正

安装mysql以后需要做两步处理.第一:设置环境变量的路径 echo "export PATH=$PATH:/usr/local/mysql/bin">>/etc/profile ,;soure /etc/profile 第2步: echo "/usr/local/mysql/lib/mysql ">>/etc/ld.so.conf ; ldconfig  这两个步骤的目的是为了后面安装courier-authlib做准备,否则易出现 "configure: error: --with-authmysql specified but no mysqlclient.so".设置mysql路径的目的是courier-authlib执行配置脚本时需要使用文件mysql-config. 如果没有设置好这两步,就是安装好了courier-authlib,它的配置目录里也不会有authmysqlrc文件!

 

安装courier-authlib需要先安装expect,用yum install expect比较省事.

检查系统,看是否存在文件courierauthconfig,一般在/usr/bin目录。先mv courierauthconfig courierauthconfig.old,不然在编译courier-authlib 会报“--with-mailgroup=vmail”之类的错误。安装好courier-authlib后需设定环境变量 COURIERAUTHCONFIG=/usr/local/authlib/bin/courierauthconfig

 

[root@postfix ~]#  /usr/local/sbin/amavisd debug
Problem in Amavis::DKIM code: Can't locate Crypt/OpenSSL/RSA.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8) at (. 81) line 25.
BEGIN failed--compilation aborted at (. 81) line 2

这一类错误产生的原因是缺少相应的perl模块,也是postfix安装最麻烦的成分.它的处理方法是执行 cpan  Crypt::OpenSSL::RSA 就可以很方便的安装好这个模块.再次执行 /usr/local/sbin/amavisd debug  还会出现类似的问题,依照此法一一解决.记住这个惯例,在安装时把斜线变成双冒号,同时省略文件的后缀(Crypt/OpenSSL/RSA.pm---->Crypt::OpenSSL::RSA.pm).实际上缺省的包大部分是2个斜杠的,如Archive/Zip.pm,做法也是相同的.

 

这是因为缺少模块DBI.pm,执行cpan DBI就解决了.

 

postfixadmin配置文件 config.inc.php需要特别注意的地方如下:

// Mailboxes

// If you want to store the mailboxes per domain set this to 'YES'.

// Example: /usr/local/virtual/domain.tld/[email protected]

$CONF['domain_path'] = 'YES';

// If you don't want to have the domain in your mailbox set this to 'NO'.

// Example: /usr/local/virtual/domain.tld/username

$CONF['domain_in_mailbox'] = 'NO';

默认的值分别为"$CONF['domain_path'] ='NO'及$CONF['domain_path'] ='YES'.这样修改后,在浏览器用postfixadmin添加邮件用户时,生成的目录形式式为/var/mailbox/sery.com/sery.

 

 

Aug 17 11:30:43 postfix authdaemond: supplied password 'hzdgwy' does not match clearpasswd '$1$02d45893$je5tgY.9XFlJzOWiuiN.70'  输入的密码本来是正确的,可是foxmail就是不能正确登陆收信,用web方式输入用户名和密码,确实是正常的.什么原因?courier-authlib配置文件authmysqlrc加密的条目为"MYSQL_CLEAR_PWFIELD     password",那么postfixadmin的配置文件config.ini.php相应的项目应为"$CONF['encrypt'] = 'cleartext';",默认为"$CONF['encrypt'] = 'md5crypt';",改成一致后就能验证了.另外webmail(extmail)的文件webmail.cf的条目也得是"SYS_CRYPT_TYPE = cleartext".

 

cleartext把密码也明文方式存储在数据库中

 

 

使用pop3 over ssl 一共4步（假定安装目录为/usr/local/imap）

1、进入目录 /usr/local/imap/share 修改一下文件mkpop3dcert，这个把有效期改一下，其结果如下（默认一年--365天，红色字体为更改值）

#! /bin/sh # # $Id: mkpop3dcert.in,v 1.2 2005/06/29 18:01:17 mrsam Exp $ # # Copyright 2000-2005 Double Precision, Inc.  See COPYING for # distribution information. # # This is a short . to quickly generate a self-signed X.509 key for # POP3 over SSL.  Normally this . would get called by an automatic # package installation routine.   test -x /usr/bin/openssl || exit 0   prefix="/usr/local/imap"   if test -f /usr/local/imap/share/pop3d.pem then         echo "/usr/local/imap/share/pop3d.pem already exists."         exit 1 fi   umask 077 cp /dev/null /usr/local/imap/share/pop3d.pem chmod 600 /usr/local/imap/share/pop3d.pem chown root /usr/local/imap/share/pop3d.pem   cleanup() {         rm -f /usr/local/imap/share/pop3d.pem         rm -f /usr/local/imap/share/pop3d.rand         exit 1 }   dd if=/dev/urandom of=/usr/local/imap/share/pop3d.rand count=1 2>/dev/null /usr/bin/openssl req -new -x509 -days 36500 -nodes \         -config /usr/local/imap/etc/pop3d.cnf -out /usr/local/imap/share/pop3d.pem -keyout /usr/local/imap/share/pop3d.pem || cleanu p /usr/bin/openssl gendh -rand /usr/local/imap/share/pop3d.rand 512 >>/usr/local/imap/share/pop3d.pem || cleanup /usr/bin/openssl x509 -subject -dates -fingerprint -noout -in /usr/local/imap/share/pop3d.pem || cleanup rm -f /usr/local/imap/share/pop3d.rand

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2、执行命令 / usr/local/imap/share/mkpop3dcert ，在同一目录生成所需的文件 pop3d.pem

 

3、启动pop3-ssl。执行命令 /usr/local/imap/libexec/pop3d-ssl.rc start  就ok。 执行后用 netstat -anp|grep 995 检查一下是否监听。

tcp        0      0 :::995                      :::*                        LISTEN      2412/couriertcpd

 

4、客户端更改。把客户端的pop端口由 110改成 995。然后收取一下，这样就能准确无误的验证ssl功能是否正常。