Oracle彻底删除11gR2 GI
环境：RHEL 6.5 + Oracle 11.2.0.4 GI
需求：在搭建Standby RAC时，安装GI软件期间由于GI安装遇到一些问题，root脚本执行hang住，且无任何报错（跟踪/opt/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_jystdrac1.log也无任何报错，几小时都不再刷新），因为11.2后的root脚本是可以重复执行的，所以反复尝试执行root脚本,但结果均未成功。
由于这个虚拟的系统环境是直接从很久前自己做的实验直接复制过来的，只能是怀疑环境本身有问题，现在想完全重新安装GI，在这之前需要Oracle彻底删除11g GI，这个操作可以参考MOS文档：
How to completely remove 11.2 and 12.1 Grid Infrastructure, CRS and/or Oracle Restart - IBM: Linux on System z (文档 ID 1413787.1)
注：我这里的实验环境由于是GI并未完全成功安装成功，所以有些命令的输出可能并不是标准输出。
主要步骤如下：
- 1.删除CRS配置
- 2.删除Oracle Restart
- 3.修改/etc/inittab
- 4.清除文件
- 5.重新安装前的准备
1.删除CRS配置
删除CRS配置
使用root用户，执行
/opt/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig -force -verbose
[root@jystdrac1 install]# /opt/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig -force -verbose
Using configuration parameter file: /opt/app/11.2.0/grid/crs/install/crsconfig_params
PRCR-1119 : Failed to look up CRS resources of ora.cluster_vip_net1.type type
PRCR-1068 : Failed to query resources
Cannot communicate with crsd
PRCR-1070 : Failed to check if resource ora.gsd is registered
Cannot communicate with crsd
PRCR-1070 : Failed to check if resource ora.ons is registered
Cannot communicate with crsd
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Stop failed, or completed with errors.
CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'jystdrac1'
CRS-2673: Attempting to stop 'ora.crf' on 'jystdrac1'
CRS-2673: Attempting to stop 'ora.mdnsd' on 'jystdrac1'
CRS-2677: Stop of 'ora.mdnsd' on 'jystdrac1' succeeded
CRS-2677: Stop of 'ora.crf' on 'jystdrac1' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'jystdrac1'
CRS-2677: Stop of 'ora.gipcd' on 'jystdrac1' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'jystdrac1'
CRS-2677: Stop of 'ora.gpnpd' on 'jystdrac1' succeeded
CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'jystdrac1' has completed
CRS-4133: Oracle High Availability Services has been stopped.
Removing Trace File Analyzer
error: package cvuqdisk is not installed
Successfully deconfigured Oracle clusterware stack on this node在GI的最后一个节点，你需要在rootcrs.pl命令后添加–lastnode参数
/opt/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig -lastnode -verbose -force
[root@jystdrac2 ~]# /opt/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig -lastnode -verbose -force
Using configuration parameter file: /opt/app/11.2.0/grid/crs/install/crsconfig_params
Adding Clusterware entries to upstart
crsexcl failed to start
Failed to start the Clusterware. Last 20 lines of the alert log follow:
****Unable to retrieve Oracle Clusterware home.
Start Oracle Clusterware stack and try again.
****Unable to retrieve Oracle Clusterware home.
Start Oracle Clusterware stack and try again.
****Unable to retrieve Oracle Clusterware home.
Start Oracle Clusterware stack and try again.
****Unable to retrieve Oracle Clusterware home.
Start Oracle Clusterware stack and try again.
****Unable to retrieve Oracle Clusterware home.
Start Oracle Clusterware stack and try again.
Failure in execution (rc=-1, 0, No such file or directory) for command /opt/app/11.2.0/grid/bin/crsctl stop res ora.registry.acfs -n jystdrac2 -f
Failure in execution (rc=-1, 0, No such file or directory) for command /opt/app/11.2.0/grid/bin/crsctl delete res ora.registry.acfs -f
Either /etc/oracle/ocr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
Either /etc/oracle/ocr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
sh: /opt/app/11.2.0/grid/bin/crsctl: No such file or directory
Failure in execution (rc=-1, 32512, No such file or directory) for command /opt/app/11.2.0/grid/bin/crsctl delete res ora.drivers.acfs -init -f
Either /etc/oracle/ocr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
Either /etc/oracle/ocr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
Failure in execution (rc=-1, 32512, No such file or directory) for command /opt/app/11.2.0/grid/bin/crsctl stop crs -f
Either /etc/oracle/ocr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
Either /etc/oracle/ocr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
################################################################
# You must kill processes or reboot the system to properly #
# cleanup the processes started by Oracle clusterware #
################################################################
Either /etc/oracle/ocr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
Either /etc/oracle/ocr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
Can't exec "/opt/app/11.2.0/grid/bin/clsecho": No such file or directory at /opt/app/11.2.0/grid/lib/acfslib.pm line 1464.
Either /etc/oracle/olr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
Either /etc/oracle/olr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
Failure in execution (rc=-1, 256, No such file or directory) for command /etc/init.d/ohasd deinstall
error: package cvuqdisk is not installed
Successfully deconfigured Oracle clusterware stack on this node2.删除Oracle Restart
使用root用户，执行：
/opt/app/11.2.0/grid/crs/install/roothas.pl -deconfig -verbose -force
[root@jystdrac1 app]# /opt/app/11.2.0/grid/crs/install/roothas.pl -deconfig -verbose -force
Using configuration parameter file: /opt/app/11.2.0/grid/crs/install/crsconfig_params
CRS-4047: No Oracle Clusterware components configured.
CRS-4000: Command Stop failed, or completed with errors.
CRS-4047: No Oracle Clusterware components configured.
CRS-4000: Command Delete failed, or completed with errors.
CRS-4047: No Oracle Clusterware components configured.
CRS-4000: Command Stop failed, or completed with errors.
You must kill ohasd processes or reboot the system to properly
cleanup the processes started by Oracle clusterware
ACFS-9313: No ADVM/ACFS installation detected.
Either /etc/oracle/olr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
Failure in execution (rc=-1, 256, No such file or directory) for command /etc/init.d/ohasd deinstall
Successfully deconfigured Oracle Restart stack第二个节点：
[root@jystdrac2 ~]# /opt/app/11.2.0/grid/crs/install/roothas.pl -deconfig -verbose -force
Using configuration parameter file: /opt/app/11.2.0/grid/crs/install/crsconfig_params
Failure in execution (rc=-1, 256, No such file or directory) for command /opt/app/11.2.0/grid/bin/crsctl stop resource ora.cssd -f
Failure in execution (rc=-1, 256, No such file or directory) for command /opt/app/11.2.0/grid/bin/crsctl delete resource ora.cssd -f
Failure in execution (rc=-1, 256, No such file or directory) for command /opt/app/11.2.0/grid/bin/crsctl stop has -f
You must kill ohasd processes or reboot the system to properly
cleanup the processes started by Oracle clusterware
Can't exec "/opt/app/11.2.0/grid/bin/clsecho": No such file or directory at /opt/app/11.2.0/grid/lib/acfslib.pm line 1464.
Either /etc/oracle/olr.loc does not exist or is not readable
Make sure the file exists and it has read and execute access
Failure in execution (rc=-1, 256, No such file or directory) for command /etc/init.d/ohasd deinstall
Successfully deconfigured Oracle Restart stack3.修改 /etc/inittab
修改/etc/inittab，移除相关配置信息：
tail /etc/inittab
#h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 我这里的实验环境这个文件还没有这个内容，所以不需要做操作，继续往下。
4.清除文件
按照MOS的描述，清除所有存在的相关文件：
If the Oracle Grid root.sh script has been run on any of the nodes previously, then the
Linux inittab file should be modified to remove the lines that were added.
Deconfig should remove this line but it is best to verify.
tail /etc/inittab
#h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 *********this is $ORACLE_BASE
rm -rf ****this is the central inventory loc pointed to by oraInst.loc
rm -rf **********this is the Grid Home
rm -rf **********this is the DB Home#5.重新安装前的准备
确认目录权限正确：
mkdir -p /opt/app/ && chown -R oracle:oinstall /opt/app/ && chmod 775 /opt/app && ls -lh /opt安装cvuqdisk的rpm包
rpm -ivh /opt/app/media/grid/rpm/cvuqdisk-1.0.9-1.rpm清除ocr/voting磁盘信息:
dd if=/dev/zero of=/dev/ bs=1M count=100
dd if=/dev/zero of=/dev/asm-diskb bs=1M count=100
dd if=/dev/zero of=/dev/asm-diskc bs=1M count=100
dd if=/dev/zero of=/dev/asm-diskd bs=1M count=100然后所有节点重启主机，准备在清空所有配置后的环境下进行一次全新的GI安装。