在华为usg防火墙上配置了snmp v3，通过python的netsnmp模块获取接口上的公网上。

  • usg上的snmp配置，将yorur_usernam、your_auth_pass、yoru_priva_pass替换你自己的设置
snmp-agent
snmp-agent sys-info version v3
snmp-agent group v3 v3group privacy read-view v3view write-view v3view notify-view v3view
snmp-agent mib-view included v3view iso
snmp-agent usm-user v3 your_username
snmp-agent usm-user v3 your_username group v3group
snmp-agent usm-user v3 your_username authentication-mode sha cipher your_auth_pass
snmp-agent usm-user v3 your_username privacy-mode aes128 cipher yoru_priva_pass
snmp-agent trap source Vlanif11
snmp-agent trap enable

int vlan 11
service-manage snmp permit

  • 在linux下通过下面的命令可以获取usg接口上的所有IP

    snmpwalk  -O n -v 3 -u your_username \
-a SHA -A 'your_auth_pass' \
    -x AES -X 'yoru_priva_pass' \
    -l authPriv your_vlan11_ip  IP-MIB::ipAdEntAddr
  • 通过python脚本获取接口上的公网IP
#!/usr/.bin/pythyon
import netsnmp
from IPy  import IP

ips = netsnmp.snmpwalk(".1.3.6.1.2.1.4.20.1.1",
                                      Version=3,
                                      SecName="your_username",
                                      DestHost="yoru_vlan11_ip",
                                      AuthProto="SHA",
                                      AuthPass="your_auth_pass",
                                      PrivProto="AES",
                                      PrivPass="yoru_priva_pass",
                                      SecLevel="authPriv"
                                      )

for ip in ips:
    if IP(ip).iptype() is 'PUBLIC':
        print ip