Enable multidex for apps with over 64K methods

Enable multidex for apps with over 64K methods

When your app and the libraries it references exceed 65,536 methods, you encounter a build error that indicates your app has reached the limit of the Android build architecture:

trouble writing output: 
Too many field references: 131000; max is 65536. 
You may try using --multi-dex option.

Older versions of the build system report a different error, which is an indication of the same problem:

Conversion to Dalvik format failed: 
Unable to execute dex: method ID not in [0, 0xffff]: 65536

Both these error conditions display a common number: 65536. This number represents the total number of references that can be invoked by the code within a single Dalvik Executable (DEX) bytecode file. This page explains how to move past this limitation by enabling an app configuration known as multidex, which allows your app to build and read multiple DEX files.

About the 64K reference limit

Android app (APK) files contain executable bytecode files in the form of Dalvik Executable (DEX) files, which contain the compiled code used to run your app. The Dalvik Executable specification limits the total number of methods that can be referenced within a single DEX file to 65,536—including Android framework methods, library methods, and methods in your own code. In the context of computer science, the term Kilo, K, denotes 1024 (or 2^10). Because 65,536 is equal to 64 X 1024, this limit is referred to as the '64K reference limit'.

Multidex support prior to Android 5.0

Versions of the platform prior to Android 5.0 (API level 21) use the Dalvik runtime for executing app code. By default, Dalvik limits apps to a single classes.dex bytecode file per APK. In order to get around this limitation, you can add the multidex support library to your project:

dependencies {
    implementation 'androidx:multidex:2.0.1'
}

If you aren't using AndroidX, add the following support library dependency instead:

dependencies {
  implementation 'com.android.support:multidex:1.0.3'
}

This library becomes part of the primary DEX file of your app and then manages access to the additional DEX files and the code they contain. More details are below in the section about how to configure your app for multidex.

Note: If your project is configured for multidex with minSdkVersion 20 or lower, and you deploy to target devices running Android 4.4 (API level 20) or lower, Android Studio disables Instant Run.

Multidex support for Android 5.0 and higher

Android 5.0 (API level 21) and higher uses a runtime called ART which natively supports loading multiple DEX files from APK files. ART performs pre-compilation at app install time which scans for classesN.dex files and compiles them into a single .oat file for execution by the Android device. Therefore, if your minSdkVersion is 21 or higher, you do not need the multidex support library.

For more information on the Android 5.0 runtime, read ART and Dalvik.

Note: While using Instant Run, Android Studio automatically configures your app for multidex when your app'sminSdkVersion is set to 21 or higher. Because Instant Run only works with the debug version of your app, you still need to configure your release build for multidex to avoid the 64K limit.

Avoid the 64K limit

Before configuring your app to enable use of 64K or more method references, you should take steps to reduce the total number of references called by your app code, including methods defined by your app code or included libraries. The following strategies can help you avoid hitting the DEX reference limit:

• Review your app's direct and transitive dependencies - Ensure any large library dependency you include in your app is used in a manner that outweighs the amount of code being added to the app. A common anti-pattern is to include a very large library because a few utility methods were useful. Reducing your app code dependencies can often help you avoid the DEX reference limit.

• Remove unused code with ProGuard - Enable code shrinking to run ProGuard for your release builds. Enabling shrinking ensures you are not shipping unused code with your APKs.

Using these techniques might help you avoid the need to enable multidex in your app while also decreasing the overall size of your APK.

Configure your app for multidex

Setting up your app project to use a multidex configuration requires that you make the following modifications to your app project, depending on the minimum Android version your app supports.

If your minSdkVersion is set to 21 or higher, all you need to do is set multiDexEnabled to true in your module-level build.gradle file, as shown here:

android {
    defaultConfig {
        ...
        minSdkVersion 21 
        targetSdkVersion 28
        multiDexEnabled true
    }
    ...
}

However, if your minSdkVersion is set to 20 or lower, then you must use the multidex support library as follows:

1. Modify the module-level build.gradle file to enable multidex and add the multidex library as a dependency, as shown here:

android {
    defaultConfig {
        ...
        minSdkVersion 15 
        targetSdkVersion 28
        multiDexEnabled true
    }
    ...
}

dependencies {
  compile 'com.android.support:multidex:1.0.3'
}

2. Depending on whether you override the Application class, perform one of the following:

• If you do not override the Application class, edit your manifest file to set android:name in the tag as follows:

    
        ...
    

• If you do override the Application class, change it to extend [MultiDexApplication](https://developer.android.com/reference/androidx/multidex/MultiDexApplication.html) (if possible) as follows:

public class MyApplication extends MultiDexApplication { ... }

class MyApplication : MultiDexApplication() {...}

• Or if you do override the Application class but it's not possible to change the base class, then you can instead override the attachBaseContext() method and call MultiDex.install(this) to enable multidex:

public class MyApplication extends SomeOtherApplication {
  @Override
  protected void attachBaseContext(Context base) {
     super.attachBaseContext(base);
     MultiDex.install(this);
  }
}

class MyApplication : SomeOtherApplication() {

    override fun attachBaseContext(base: Context) {
        super.attachBaseContext(base)
        MultiDex.install(this)
    }
}

Caution: Do not execute MultiDex.install() or any other code through reflection or JNI before MultiDex.install() is complete. Multidex tracing will not follow those calls, causing ClassNotFoundException or verify errors due to a bad class partition between DEX files.

Now when you build your app, the Android build tools construct a primary DEX file (classes.dex) and supporting DEX files (classes2.dex, classes3.dex, and so on) as needed. The build system then packages all DEX files into your APK.

At runtime, the multidex APIs use a special class loader to search all of the available DEX files for your methods (instead of searching only in the main classes.dex file).

Limitations of the multidex support library

The multidex support library has some known limitations that you should be aware of and test for when you incorporate it into your app build configuration:

• The installation of DEX files during startup onto a device's data partition is complex and can result in Application Not Responding (ANR) errors if the secondary DEX files are large. In this case, you should apply code shrinking with ProGuard to minimize the size of DEX files and remove unused portions of code.

• When running on versions prior to Android 5.0 (API level 21), using multidex is not enough to work around the linearalloc limit (issue 78035). This limit was increased in Android 4.0 (API level 14), but that did not solve it completely. And on versions lower than Android 4.0, you might reach the linearalloc limit before reaching the DEX index limit. So if you are targeting API levels lower than 14, test thoroughly on those versions of the platform, because your app might have issues at startup or when particular groups of classes are loaded.

  Code shrinking can reduce or possibly eliminate these issues.

Declare classes required in the primary DEX file

When building each DEX file for a multidex app, the build tools perform complex decision-making to determine which classes are needed in the primary DEX file so that your app can start successfully. If any class that's required during startup is not provided in the primary DEX file, then your app crashes with the error java.lang.NoClassDefFoundError.

This shouldn't happen for code that's accessed directly from your app code because the build tools recognize those code paths, but it can happen when the code paths are less visible such as when a library you use has complex dependencies. For example, if the code uses introspection or invocation of Java methods from native code, then those classes might not be recognized as required in the primary DEX file.

So if you receive java.lang.NoClassDefFoundError, then you must manually specify these additional classes as required in the primary DEX file by declaring them with the multiDexKeepFile or the multiDexKeepProguard property in your build type. If a class is matched in either the multiDexKeepFile or the multiDexKeepProguard file, then that class is added to the primary DEX file.

multiDexKeepFile property

The file you specify in multiDexKeepFile should contain one class per line, in the format com/example/MyClass.class. For example, you can create a file called multidex-config.txt that looks like this:

com/example/MyClass.class 
com/example/MyOtherClass.class

Then you can declare that file for a build type as follows:

android {
    buildTypes {
        release {
            multiDexKeepFile file('multidex-config.txt')
            ...
        }
    }
}

Remember that Gradle reads paths relative to the build.gradle file, so the above example works if multidex-config.txt is in the same directory as the build.gradle file.

multiDexKeepProguard property

The multiDexKeepProguard file uses the same format as Proguard and supports the entire Proguard grammar. For more information about Proguard format and grammar, see the Keep Options section in the Proguard manual.

The file you specify in multiDexKeepProguard should contain -keep options in any valid ProGuard syntax. For example, -keep com.example.MyClass.class. You can create a file called multidex-config.pro that looks like this:

-keep class com.example.MyClass 
-keep class com.example.MyClassToo

If you want to specify all classes in a package, the file looks like this:

-keep class com.example.** { *; } // All classes in the com.example package

Then you can declare that file for a build type as follows:

android {
    buildTypes {
        release {
            multiDexKeepProguard file('multidex-config.pro')
            ...
        }
    }
}

Optimize multidex in development builds

A multidex configuration requires significantly increased build processing time because the build system must make complex decisions about which classes must be included in the primary DEX file and which classes can be included in secondary DEX files. This means that incremental builds using multidex typically take longer and can potentially slow your development process.

To mitigate longer incremental build times, you should use pre-dexing to reuse multidex output between builds. Pre-dexing relies on an ART format available only on Android 5.0 (API level 21) and higher. If you're using Android Studio 2.3 and higher, the IDE automatically uses this feature when deploying your app to a device running Android 5.0 (API level 21) or higher.

Tip: Android plugin for Gradle 3.0.0 and higher include further improvements to optimize build speeds, such as per-class dexing (so that only the classes that you modify are re-dexed). In general, for the best development experience, you should always upgrade to the latest version of Android Studio and the Android plugin.

However, if you're running Gradle builds from the command line, you need to set the minSdkVersion to 21 or higher to enable pre-dexing. A helpful strategy to preserve settings for your production build is to create two versions of your appusing product flavors: a development flavor and a release flavor with different values for minSdkVersion, as shown below.

android {
    defaultConfig {
        ...
        multiDexEnabled true
        // The default minimum API level you want to support.
        minSdkVersion 15
    }
    productFlavors {
        // Includes settings you want to keep only while developing your app.
        dev {
            // Enables pre-dexing for command line builds. When using
            // Android Studio 2.3 or higher, the IDE enables pre-dexing
            // when deploying your app to a device running Android 5.0
            // (API level 21) or higher—regardless of what you set for
            // minSdkVersion.
            minSdkVersion 21
        }
        prod {
            // If you've configured the defaultConfig block for the production version of
            // your app, you can leave this block empty and Gradle uses configurations in
            // the defaultConfig block instead. You still need to include this flavor.
            // Otherwise, all variants use the "dev" flavor configurations.
        }
    }
    buildTypes {
        release {
            minifyEnabled true
            proguardFiles getDefaultProguardFile('proguard-android.txt'),
                                                 'proguard-rules.pro'
        }
    }
}
dependencies {
    compile 'com.android.support:multidex:1.0.3'
}

To learn more strategies to help improve build speeds (from either Android Studio or the command line), read Optimize Your Build Speed. For more information about using build variants, see Configure Build Variants.

Tip: Now that you have different build variants for different multidex needs, you can also provide a different manifest file for each variant (so only the one for API level 20 and lower changes the tag name), or create a different Application subclass for each variant (so only the one for API level 20 and lower extends the MultiDexApplication class or calls MultiDex.install(this)).

Test multidex apps

When you write instrumentation tests for multidex apps, no additional configuration is required if you use aMonitoringInstrumentation (or an AndroidJUnitRunner) instrumentation. If you use another Instrumentation, then you must override its onCreate() method with the following code:

public void onCreate(Bundle arguments) {
  MultiDex.install(getTargetContext());
  super.onCreate(arguments);
  ...
}

fun onCreate(arguments: Bundle) {
  MultiDex.install(targetContext)
  super.onCreate(arguments)
  ...
}

Notes:

• Don't use MultiDexTestRunner, which is deprecated; use AndroidJUnitRunner instead.
• Using multidex to create a test APK is not currently supported.

简体中文