返回目录
生词难句
- validity n. [计] 有效性；正确；正确性
- in the midst of processing
- midst n. 当中，中间 prep. 在…中间（等于amidst）
- as a byproduct of invoking m.signum()
- byproduct n. 副产品
- avoid the clutter of documenting
- clutter n. 杂乱，混乱 vt. 使凌乱；胡乱地填满 n. (Clutter)人名；(英)克拉特
- freestanding adj. 独立式的；非附属的；不需依靠支撑物的
- it is designed solely for use on list and array indices
- solely adv. 单独地，唯一地
- an object that violates its class invariants
- invariant adj. 不变的 n. [数] 不变量；[计] 不变式
- impractical adj. 不切实际的，不现实的；不能实行的
- mutually comparable
- adv. 互相地；互助
- Therefore, there would be little point in checking ahead of time that the elements in the list were mutually comparable
- little point 意义不大
- Note, however, that indiscriminate reliance on implicit validity checks can result in the loss of failure atomicity (Item 76)
- indiscriminate adj. 任意的；无差别的；不分皂白的
- reliance n. 信赖；信心；受信赖的人或物
- you should use the exception translation idiom
- idiom n. 成语，习语；土话
- Do not infer from this item that arbitrary restrictions on parameters are a good thing
- infer from 从...中导出
- The modest work that it entails will be paid back with interest the first time a validity check fails
- modest adj. 谦虚的，谦逊的；适度的；端庄的；羞怯的
- entail vt. 使需要，必需；承担；遗传给；蕴含 n. 引起；需要；继承
- pay back with interest 连本带利偿还
Item 49: Check parameters for validity
Most methods and constructors have some restrictions on what values may be passed into their parameters. For example, it is not uncommon that index values must be non-negative and object references must be non-null. You should clearly document all such restrictions and enforce them with checks at the beginning of the method body. This is a special case of the general principle that you should attempt to detect errors as soon as possible after they occur. Failing to do so makes it less likely that an error will be detected and makes it harder to determine the source of an error once it has been detected.
If an invalid parameter value is passed to a method and the method checks its parameters before execution, it will fail quickly and cleanly with an appropriate exception. If the method fails to check its parameters, several things could happen. The method could fail with a confusing exception in the midst of processing. Worse, the method could return normally but silently compute the wrong result. Worst of all, the method could return normally but leave some object in a compromised state, causing an error at some unrelated point in the code at some undetermined time in the future. In other words, failure to validate parameters, can result in a violation of failure atomicity (Item 76).
For public and protected methods, use the Javadoc @throws tag to document the exception that will be thrown if a restriction on parameter values is violated (Item 74). Typically, the resulting exception will be IllegalArgumentException, IndexOutOfBoundsException, or NullPointerException (Item 72). Once you’ve documented the restrictions on a method’s parameters and you’ve documented the exceptions that will be thrown if these restrictions are violated, it is a simple matter to enforce the restrictions. Here’s a typical example:
/**
* Returns a BigInteger whose value is (this mod m). This method
* differs from the remainder method in that it always returns a
* non-negative BigInteger.
*
* @param m the modulus, which must be positive
* @return this mod m
* @throws ArithmeticException if m is less than or equal to 0
*/
public BigInteger mod(BigInteger m) {
if (m.signum() <= 0)
throw new ArithmeticException("Modulus <= 0: " + m);
... // Do the computation
}
Note that the doc comment does not say “mod throws NullPointerException if m is null,” even though the method does exactly that, as a byproduct of invoking m.signum(). This exception is documented in the class-level doc comment for the enclosing BigInteger class. The class-level comment applies to all parameters in all of the class’s public methods. This is a good way to avoid the clutter of documenting every NullPointerException on every method individually. It may be combined with the use of @Nullable or a similar annotation to indicate that a particular parameter may be null, but this practice is not standard, and multiple annotations are in use for this purpose.
The Objects.requireNonNull method, added in Java 7, is flexible and convenient, so there’s no reason to perform null checks manually anymore. You can specify your own exception detail message if you wish. The method returns its input, so you can perform a null check at the same time as you use a value:
// Inline use of Java's null-checking facility
this.strategy = Objects.requireNonNull(strategy, "strategy");
You can also ignore the return value and use Objects.requireNonNull as a freestanding null check where that suits your needs.
In Java 9, a range-checking facility was added to java.util.Objects. This facility consists of three methods: checkFromIndexSize, checkFromToIndex, and checkIndex. This facility is not as flexible as the null-checking method. It doesn’t let you specify your own exception detail message, and it is designed solely for use on list and array indices. It does not handle closed ranges (which contain both of their endpoints). But if it does what you need, it’s a useful convenience.
For an unexported method, you, as the package author, control the circumstances under which the method is called, so you can and should ensure that only valid parameter values are ever passed in. Therefore, nonpublic methods can check their parameters using assertions, as shown below:
// Private helper function for a recursive sort
private static void sort(long a[], int offset, int length) {
assert a != null;
assert offset >= 0 && offset <= a.length;
assert length >= 0 && length <= a.length - offset;
... // Do the computation
}
In essence, these assertions are claims that the asserted condition will be true, regardless of how the enclosing package is used by its clients. Unlike normal validity checks, assertions throw AssertionError if they fail. And unlike normal validity checks, they have no effect and essentially no cost unless you enable them, which you do by passing the -ea (or -enableassertions) flag to the java command. For more information on assertions, see the tutorial [Asserts].
It is particularly important to check the validity of parameters that are not used by a method, but stored for later use. For example, consider the static factory method on page 101, which takes an int array and returns a List view of the array. If a client were to pass in null, the method would throw a NullPointerException because the method has an explicit check (the call to Objects.requireNonNull). Had the check been omitted, the method would return a reference to a newly created List instance that would throw a NullPointerException as soon as a client attempted to use it. By that time, the origin of the List instance might be difficult to determine, which could greatly complicate the task of debugging.
Constructors represent a special case of the principle that you should check the validity of parameters that are to be stored away for later use. It is critical to check the validity of constructor parameters to prevent the construction of an object that violates its class invariants.
There are exceptions to the rule that you should explicitly check a method’s parameters before performing its computation. An important exception is the case in which the validity check would be expensive or impractical and the check is performed implicitly in the process of doing the computation. For example, consider a method that sorts a list of objects, such as Collections.sort(List). All of the objects in the list must be mutually comparable. In the process of sorting the list, every object in the list will be compared to some other object in the list. If the objects aren’t mutually comparable, one of these comparisons will throw a ClassCastException, which is exactly what the sort method should do. Therefore, there would be little point in checking ahead of time that the elements in the list were mutually comparable. Note, however, that indiscriminate reliance on implicit validity checks can result in the loss of failure atomicity (Item 76).
Occasionally, a computation implicitly performs a required validity check but throws the wrong exception if the check fails. In other words, the exception that the computation would naturally throw as the result of an invalid parameter value doesn’t match the exception that the method is documented to throw. Under these circumstances, you should use the exception translation idiom, described in Item 73, to translate the natural exception into the correct one.
Do not infer from this item that arbitrary restrictions on parameters are a good thing. On the contrary, you should design methods to be as general as it is practical to make them. The fewer restrictions that you place on parameters, the better, assuming the method can do something reasonable with all of the parameter values that it accepts. Often, however, some restrictions are intrinsic to
the abstraction being implemented.
To summarize, each time you write a method or constructor, you should think about what restrictions exist on its parameters. You should document these restrictions and enforce them with explicit checks at the beginning of the method body. It is important to get into the habit of doing this. The modest work that it entails will be paid back with interest the first time a validity check fails.
当当当当，恭喜你，已经看到这里了，真是棒棒哒，希望这篇文章让你有所收获，如果有哪些不懂的地方，欢迎在评论中提出，大家一起探讨，当然，如有你碰到了一些自己不熟悉但是上方没有列出的词句，欢迎在下方评论中给出你查到的解释，这样也可以帮助到后来看文章的人，感激不尽
最后，如果哪位大款能施舍个一分两分的，也是极好的，哈哈哈