DHCP Server : Install

Install DHCP ( Dynamic Host Configuration Protocol ) Server.

[1]	Before settings DHCP, Configure AD DS in your LAN and make the DHCP Host join the Domain first.
[2]	Run Server Manager and Click [Add roles and features].

[3]	Click [Next] button.

[4]	Select [Role-based or feature-based installation].

[5]	Select a Host which you'd like to add services.

[6]	Check a box [DHCP Server].

[7]	Addtional features are required to add DHCP Server. Click [Add Features] button.

[8]	Click [Next] button.

[9]	Click [Next] button.

[10]	Click [Next] button.

[11]	Click [Install] button.

[12]	After finishing Installation, click [Close] button.

DHCP Server : Configure

Configure installed DHCP Server.

[1]	Run Server Manager and Click [DHCP] on the left menu.

[2]	Click [More...] link which is upper-right.

[3]	Click [Complete DHCP configuration] link which is upper-right.

[4]	Click [Next] button.

[5]	Specify the credencials to authorize this DHCP Server in AD DS and click [Commit] button.

[6]	After successing authorization normally, click [Close] button.

[7]	Back to Server Manager and open [Tools] - [DHCP].

[8]	Right-Click [IPv4] on the left pane and select [New Scope...].

[9]	Click [Next] button.

[10]	Input any name and decsription for this scope.

[11]	Define IP address range.

[12]	If you'd like to exclude specific IP address from the range set in previous section, Configure it on here.

[13]	Define lease duration.

[14]	Click [Next] button.

[15]	Define default gateway of your network.

[16]	Define domain name and DNS server of your network.

[17]	Define WINS Server. It's OK to keep empty here if you don't need it.

[18]	Click [Next] button.

[19]	Click [Finish] button to complete configuration.

[20]	New DHCP scope has beed added.