一：写bash脚本时候经常用到的颜色代码
COLOR_SUCCESS=$（echo -en "[url=file://\\033[1;32m]\\033[1;32m[/url]" ） COLOR_FAILURE=$(echo -en "[url=file://\\033[1;31m]\\033[1;31m[/url]" ) COLOR_WARNING=$(echo -en "[url=file://\\033[1;33m]\\033[1;33m[/url]") COLOR_NORMAL=$(echo -en "[url=file://\\033[0;39m]\\033[0;39m[/url]")
二：自动化部署简介
由于服务器数量的不断增加，面对数以千计的需要做Nagios 监控的客户端，自动化部署就会被提上日程了,自动化部署最简单的是把安装时的命令通过脚本组合在一起，再加上一些成功与否的判断
Nagios server 端Nagios服务器自动安装脚本部署脚本
#!/bin/sh #==================================== # $Name: nagios-server-install.sh # $Revision: 1.0 # $Function: install the nagios monitor # $Author: zangyunchao # $organization: 洛阳理工&zzu # $Create Date: 2013.05 #==================================== #颜色设置 COLOR_SUCCESS=$（echo -en "[url=file://\\033[1;32m]\\033[1;32m[/url]" ） COLOR_FAILURE=$(echo -en "[url=file://\\033[1;31m]\\033[1;31m[/url]" ) COLOR_WARNING=$(echo -en "[url=file://\\033[1;33m]\\033[1;33m[/url]") COLOR_NORMAL=$(echo -en "[url=file://\\033[0;39m]\\033[0;39m[/url]") yum -y install httpd gcc gcc-c++ glibc glibc-common gd gd-devel useradd nagios groupadd nagcmd usermod -G nagcmd nagios usermod -G nagcmd apache cd /usr/local/src wget http://nchc.dl.sourceforge.net/sourceforge/nagios/nagios-3.0.6.tar.gz wget http://nchc.dl.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.13.tar.gz wget http://prdownloads.sourceforge.net/sourceforge/nagios/nrpe-2.13.tar.gz tar zxvf nagios-3.0.6.tar.gz cd nagios-3.0.6 ./configure --with-command-group=nagcmd --prefix=/usr/local/nagios make all make install make install-init make install-config make install-commandmode make install-webconf cd ../ tar zxvf nagios-plugins-1.4.13.tar.gz cd nagios-plugins-1.4.13 ./configure --prefix=/usr/local/nagios --with-nagios-user=nagios --with-nagios-group=nagios make && make install cd ../ tar zxvf nrpe-2.13.tar.gz cd nrpe-2.13 ./configure make all make install-plugin make install-daemon make install-daemon-config htpasswd -bc /usr/local/nagios/etc/htpasswd.users xiaozang333 xiaozang333 #为nagios登录名和密码要牢记 echo "alias nagioscheck='/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg' " >> /root/.bashrc source /root/.bashrc chkconfig nagios on chkconfig httpd on service httpd start service nagios start service sendmail start
Nagios Client 端《linux系统》部署脚本
脚本一
#!/bin/sh #==================================== # $Name: nagios-server-install.sh # $Revision: 1.0 # $Function: install the nagios monitor # $Author: zangyunchao # $organization: 洛阳理工&zzu # $Create Date: 2013.05 #==================================== useradd nagios cd /usr/local/src wget http://nchc.dl.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.13.tar.gz wget http://prdownloads.sourceforge.net/sourceforge/nagios/nrpe-2.13.tar.gz tar zxvf nagios-plugins-1.4.13.tar.gz cd nagios-plugins-1.4.13 ./configure make make install chown nagios:nagios /usr/local/nagios chown -R nagios:nagios /usr/local/nagios/libexec cd ../ tar zxvf nrpe-2.13.tar.gz cd nrpe-2.13 ./configure make all make install-plugin make install-daemon make install-daemon-config sed -i 's@allowed_hosts=127.0.0.1@allowed_hosts=114.112.11.11@' /usr/local/nagios/etc/nrpe.cfg /usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d echo "/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d" >> /etc/rc.local
nagios服务监控端增加window主机脚本（windows系统）
## script begins here
#! /bin/bash
echo "Enter Host Name"
read name
echo "Enter IP Address of $name"
read ip_add
echo "
define host{
use windows-server //使用的主机组名
host_name $name //主机名
alias $name //主机别名
｝
nagios监控系统内存
#!/bin/sh #==================================== # $Name: sysmem_check.sh # $Revision: 1.0 # $Function: This Nagios plugin can be check linux system memory status # $Author: zangyunchao cp from Shundong Zhao # $organization: UnixHot # $Create Date: 2010-06-10 #==================================== USAGE_Method="$(basename $0) [-w|--warning][-c|--critical] " USAGE_Value="WARNING value must be large than CRITICAL value: `basename $0` $*" STATE_OK=0 STATE_WARNING=1 STATE_CRITICAL=2 STATE_UNKNOWN=3 #设置Nagios要求的状态 if [ $# -lt 4 ];then echo echo "Usage: $USAGE_Method" echo exit 0 fi while [ $# -gt 0 ];do case "$1" in -w|--warning) shift WARNING=$1 ;; -c|--critical) shift CRITICAL=$1 ;; esac shift done if [[ $WARNING -eq $CRITICAL || $WARNING -lt $CRITICAL ]] then echo echo "$USAGE_Value" echo echo "Usage: $USAGE_Method" echo exit 0 fi FREE_MEM=$(free -m | grep - | awk -F ' ' '{print $4}') #取当前未使用的内存，注意是未使用！ TOTAL_MEM=$(free -m | grep Mem | awk -F ' ' '{print $2}') #取当前系统总内存 PERCENT=$(bc <<< "scale=2;$FREE_MEM/$TOTAL_MEM" | tr '^.' ' ') #使用bc输出百分比 if [ "$PERCENT" -le "$CRITICAL" ] #如果监测百分比小于等于用户设置的严重错误值，返回2 then echo "CRITICAL - $FREE_MEM MB ($PERCENT%) Free Memory" exit 2 fi if [ "$PERCENT" -le "$WARNING" ] #如果百分比小于等于用户设置的警告值就警告并返回1 then echo "WARNING - $FREE_MEM MB ($PERCENT%) Free Memory" exit 1 fi if [ "$PERCENT" -gt "$WARNING" ] #如果百分比大于用户设置的警告值就输出OK返回0 then echo "OK - $FREE_MEM MB ($PERCENT%) Free Memory" exit 0 fi
nagios client 被监控端-----for linux系统
#/bin/bash
clear
echo "========================================================================="
echo "Welcome to UnixHot Linux Monitor"
echo "zangyunchao graduation created"
echo ""
echo "UHLM v1.0 client by UnixHot "
echo "========================================================================="
echo ""
echo "For more information please visit http://www.unixhot.com/"
echo ""
SOFTWARE_PATH=/usr/local/src
PACKAGE1=gcc
PACKAGE2=glibc
PACKAGE3=xinetd
#PACKAGE4=gd
download(){
echo "==================Start download Nagios Client package==========="
cd $SOFTWARE_PATH
wget
http://prdownloads.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.14.tar.gz
wget http://prdownloads.sourceforge.net/sourceforge/nagios/nrpe-2.12.tar.gz
chmod +x nagios-plugins-1.4.14.tar.gz
chmod +x nrpe-2.12.tar.gz
echo "Download packages finished!"
echo "================================================================="
}
nagios-plugins(){
echo "=======================install Nagios-plugins====================="
cd $SOFTWARE_PATH
useradd -s /sbin/nologin nagios
tar zxvf nagios-plugins-1.4.14.tar.gz
cd nagios-plugins-1.4.14
./configure
make && make install
}
nrpe(){
echo "=======================install nrpe================================"
cd $SOFTWARE_PATH
tar zxvf nrpe-2.12.tar.gz
cd nrpe-2.12
./configure && make all
make install-plugin
make install-daemon
make install-daemon-config
make install-xinetd
}
config(){
echo "=======================Config======================================"
sed -i 's/yes/no/g' /etc/xinetd.d/nrpe
sed -i 's/127.0.0.1/127.0.0.1 '$Nagios_Server'/g' /etc/xinetd.d/nrpe
echo "nrpe 5666/tcp #nrpe" >> /etc/services
chown -R nagios:nagios /usr/local/nagios
/etc/init.d/xinetd restart
sleep 5
netstat -na | grep 5666
echo "************************************************"
echo "If you look the LISTEN 5666 port,Congratulations, Nagios-Client Install are
successful"
echo "************************************************"
}
main(){
rpm -q $PACKAGE1 $PACKAGE2 $PACKAGE3 > /tmp/rpm.log
SOFTWARE_STATUS=`grep 'not installed' /tmp/rpm.log`
if [ -z "$SOFTWARE_STATUS" ];then
echo "Please input the Nagios Server IP Address"
read
echo "The Nagios server ip address is $REPLY"
Nagios_Server=$REPLY
download
nagios-plugins
nrpe
config
else
echo "Please install the following software first!"
echo ""
echo ""
grep 'not installed' /tmp/rpm.log
echo ""
fi
}