PHP Configure

PHP Configure

一、
./configure --prefix=/usr/local/php7.0.8 --with-mcrypt=/usr/local/lib/ --with-curl --with-freetype-dir --with-gd --with-gettext --with-iconv-dir --with-kerberos --with-libdir=lib64 --with-libxml-dir --with-mysqli --with-openssl --with-pcre-regex --with-pdo-mysql --with-pdo-sqlite --with-pear --with-png-dir --with-xmlrpc --with-xsl --with-zlib --enable-fpm --enable-bcmath --enable-libxml --enable-inline-optimization --enable-gd-native-ttf --enable-mbregex --enable-mbstring --enable-opcache --enable-pcntl --enable-shmop --enable-soap --enable-sockets --enable-sysvsem --enable-xml --enable-zip --enable-cli —disable-posix-threads

'./configure' '--prefix=/usr/local/php7.0.8' '--with-curl' '--with-freetype-dir' '--with-gd' '--with-gettext' '--with-iconv-dir' '--with-kerberos' '--with-libdir=lib64' '--with-libxml-dir' '--with-mysqli' '--with-openssl' '--with-pcre-regex' '--with-pdo-mysql' '--with-pdo-sqlite' '--with-pear' '--with-png-dir' '--with-xmlrpc' '--with-xsl' '--with-zlib' '--enable-fpm' '--enable-bcmath' '--enable-libxml' '--enable-inline-optimization' '--enable-gd-native-ttf' '--enable-mbregex' '--enable-mbstring' '--enable-opcache' '--enable-pcntl' '--enable-shmop' '--enable-soap' '--enable-sockets' '--enable-sysvsem' '--enable-xml' '--enable-zip' '--enable-cli' '--with-mcrypt'

sudo yum install libmcrypt-devel

sudo make clean
sudo make & make install

sudo make & make install 报错

/bin/ld: ext/phar/.libs/util.o: undefined reference to symbol 'EVP_DigestInit@@libcrypto.so.10'
/bin/ld: note: 'EVP_DigestInit@@libcrypto.so.10' is defined in DSO /lib64/libcrypto.so.10 so try adding it to the linker command line
/lib64/libcrypto.so.10: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make: *** [sapi/cli/php] Error 1

使用 RepoForge

#1 查看 CPU architecture
uname -i

2 我的服务器芯片结构是 x86_64,我直接使用 wget 下载 rpm 安装包

wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm

Download the rpmforge-release package. Choose one of the two links below, selecting to match your host's architecture. If you are unsure of which one to use you can check your architecture with the command uname -i
i686 http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el6.rf.i686.rpm
x86_64 http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm

The preferred rpmforge-release package to retrieve and to install in order to enable that repository is one of the two listed above.

Install DAG's GPG key
rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt

If you get an error message like the following the key has already been imported:
error: http://apt.sw.be/RPM-GPG-KEY.dag.txt: key 1 import failed.

Verify the package you have downloaded
rpm -K rpmforge-release-0.5.3-1.el6.rf.*.rpm

Security warning: The rpmforge-release package imports GPG keys into your RPM database. As long as you have verified the md5sum of the key injection package, and trust Dag, et al., then it should be as safe as your trust of them extends.

Install the package
rpm -i rpmforge-release-0.5.3-1.el6.rf.*.rpm

This will add a yum repository config file and import the appropriate GPG keys.

Then try to install something like this
yum install htop

Makefile 内容
srcdir = /home/james/php-7.0.8
builddir = /home/james/php-7.0.8
top_srcdir = /home/james/php-7.0.8
top_builddir = /home/james/php-7.0.8
EGREP = /usr/bin/grep -E
SED = /usr/bin/sed
CONFIGURE_COMMAND = './configure' '--prefix=/usr/local/php7.0.8' '--with-curl' '--with-freetype-dir' '--with-gd' '--with-gettext' '--with-iconv-dir' '--with-kerberos' '--with-libdir=lib64' '--with-libxml-dir' '--with-mysqli' '--with-openssl' '--with-pcre-regex' '--with-pdo-mysql' '--with-pdo-sqlite' '--with-pear' '--with-png-dir' '--with-xmlrpc' '--with-xsl' '--with-zlib' '--enable-fpm' '--enable-bcmath' '--enable-libxml' '--enable-inline-optimization' '--enable-gd-native-ttf' '--enable-mbregex' '--enable-mbstring' '--enable-opcache' '--enable-pcntl' '--enable-shmop' '--enable-soap' '--enable-sockets' '--enable-sysvsem' '--enable-xml' '--enable-zip' '--enable-cli' '--with-mcrypt'
CONFIGURE_OPTIONS = '--prefix=/usr/local/php7.0.8' '--with-curl' '--with-freetype-dir' '--with-gd' '--with-gettext' '--with-iconv-dir' '--with-kerberos' '--with-libdir=lib64' '--with-libxml-dir' '--with-mysqli' '--with-openssl' '--with-pcre-regex' '--with-pdo-mysql' '--with-pdo-sqlite' '--with-pear' '--with-png-dir' '--with-xmlrpc' '--with-xsl' '--with-zlib' '--enable-fpm' '--enable-bcmath' '--enable-libxml' '--enable-inline-optimization' '--enable-gd-native-ttf' '--enable-mbregex' '--enable-mbstring' '--enable-opcache' '--enable-pcntl' '--enable-shmop' '--enable-soap' '--enable-sockets' '--enable-sysvsem' '--enable-xml' '--enable-zip' '--enable-cli' '--with-mcrypt'
PHP_MAJOR_VERSION = 7
PHP_MINOR_VERSION = 0
PHP_RELEASE_VERSION = 8
PHP_EXTRA_VERSION =
AWK = gawk
YACC = exit 0;
RE2C = exit 0;
RE2C_FLAGS =
SHLIB_SUFFIX_NAME = so
SHLIB_DL_SUFFIX_NAME = so
PHP_CLI_OBJS = sapi/cli/php_cli.lo sapi/cli/php_http_parser.lo sapi/cli/php_cli_server.lo sapi/cli/ps_title.lo sapi/cli/php_cli_process_title.lo
PHP_EXECUTABLE = $(top_builddir)/$(SAPI_CLI_PATH)
SAPI_CLI_PATH = sapi/cli/php
BUILD_CLI = $(LIBTOOL) --mode=link $(CC) -export-dynamic $(CFLAGS_CLEAN) $(EXTRA_CFLAGS) $(EXTRA_LDFLAGS_PROGRAM) $(LDFLAGS) $(PHP_RPATHS) $(PHP_GLOBAL_OBJS) $(PHP_BINARY_OBJS) $(PHP_CLI_OBJS) $(EXTRA_LIBS) $(ZEND_EXTRA_LIBS) -o $(SAPI_CLI_PATH)
php_fpm_systemd = simple
php_fpm_user = nobody
php_fpm_group = nobody
php_fpm_sysconfdir = /usr/local/php7.0.8/etc
php_fpm_localstatedir = /usr/local/php7.0.8/var
php_fpm_prefix = /usr/local/php7.0.8

homebrew#

'./configure' '--prefix=/usr/local/Cellar/php70/7.0.7' '--localstatedir=/usr/local/var' '--sysconfdir=/usr/local/etc/php/7.0' '--with-config-file-path=/usr/local/etc/php/7.0' '--with-config-file-scan-dir=/usr/local/etc/php/7.0/conf.d' '--mandir=/usr/local/Cellar/php70/7.0.7/share/man' '--enable-bcmath' '--enable-calendar' '--enable-dba' '--enable-exif' '--enable-ftp' '--enable-gd-native-ttf' '--enable-mbregex' '--enable-mbstring' '--enable-shmop' '--enable-soap' '--enable-sockets' '--enable-sysvmsg' '--enable-sysvsem' '--enable-sysvshm' '--enable-wddx' '--enable-zip' '--with-freetype-dir=/usr/local/opt/freetype' '--with-gd' '--with-gettext=/usr/local/opt/gettext' '--with-iconv-dir=/usr' '--with-icu-dir=/usr/local/opt/icu4c' '--with-jpeg-dir=/usr/local/opt/jpeg' '--with-kerberos=/usr' '--with-libedit' '--with-mhash' '--with-ndbm=/usr' '--with-png-dir=/usr/local/opt/libpng' '--with-xmlrpc' '--with-zlib=/usr' '--with-readline=/usr/local/opt/readline' '--without-gmp' '--without-snmp' '--with-libxml-dir=/usr/local/opt/libxml2' '--with-pdo-odbc=unixODBC,/usr/local/opt/unixodbc' '--with-unixODBC=/usr/local/opt/unixodbc' '--with-apxs2=/usr/sbin/apxs' '--libexecdir=/usr/local/Cellar/php70/7.0.7/libexec' '--with-bz2=/usr' '--disable-debug' '--with-openssl=/usr/local/opt/openssl' '--enable-fpm' '--with-fpm-user=_www' '--with-fpm-group=_www' '--with-curl' '--with-xsl=/usr' '--with-ldap' '--with-ldap-sasl=/usr' '--with-mysql-sock=/tmp/mysql.sock' '--with-mysqli=mysqlnd' '--with-mysql=mysqlnd' '--with-pdo-mysql=mysqlnd' '--disable-opcache' '--enable-pcntl' '--without-pear' '--enable-dtrace' '--disable-phpdbg' '--enable-zend-signals' 'CC=clang' 'CXX=clang++'

二、
cat /proc/meminfo
cat /proc/cpuinfo

less /proc/cpuinfo OR lscpu

Linux show free and used memory in the system

cat /proc/meminfo

free

free -m

free -mt

free -gt

See used and free memory and cpu usage and more

top

htop(command not found)

atop(command not found)

Linux find out the current running kernel version

cat /proc/version

Linux version 3.10.0-327.22.2.el7.x86_64 ([email protected]) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Thu Jun 23 17:05:11 UTC 2016

cat /etc/*-release

CentOS Linux release 7.2.1511 (Core)
NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"

CENTOS_MANTISBT_PROJECT="CentOS-7"
CENTOS_MANTISBT_PROJECT_VERSION="7"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="7"

CentOS Linux release 7.2.1511 (Core)
CentOS Linux release 7.2.1511 (Core)

Display installed hard disk and size

fdisk -l | grep ‘^Disk /dev/’

uname -a

name -mrs

PHP 编译安装
./configure --prefix=/usr/local/php7.0.8 --with-curl --with-freetype-dir --with-gd --with-gettext --with-iconv-dir --with-kerberos --with-libdir=lib64 --with-libxml-dir --with-mysqli --with-openssl --with-pcre-regex --with-pdo-mysql --with-pdo-sqlite --with-pear --with-png-dir --with-xmlrpc --with-xsl --with-zlib --enable-fpm --enable-bcmath --enable-libxml --enable-inline-optimization --enable-gd-native-ttf --enable-mbregex --enable-mbstring --enable-opcache --enable-pcntl --enable-shmop --enable-soap --enable-sockets --enable-sysvsem --enable-xml --enable-zip
582 2016-06-30 11:23:03 ./configure --prefix=/usr/local/php7.0.8 --with-curl --with-freetype-dir --with-gd --with-gettext --with-iconv-dir --with-kerberos --with-libdir=lib64 --with-libxml-dir --with-mysqli --with-openssl --with-pcre-regex --with-pdo-mysql --with-pdo-sqlite --with-pear --with-png-dir --with-xmlrpc --with-xsl --with-zlib --enable-fpm --enable-bcmath --enable-libxml --enable-inline-optimization --enable-gd-native-ttf --enable-mbregex --enable-mbstring --enable-opcache --enable-pcntl --enable-shmop --enable-soap --enable-sockets --enable-sysvsem --enable-xml --enable-zip
584 2016-06-30 11:27:24 ./configure --prefix=/usr/local/php7.0.8 --with-curl --with-freetype-dir --with-gd --with-gettext --with-iconv-dir --with-kerberos --with-libdir=lib64 --with-libxml-dir --with-mysqli --with-openssl --with-pcre-regex --with-pdo-mysql --with-pdo-sqlite --with-pear --with-png-dir --with-xmlrpc --with-xsl --with-zlib --enable-fpm --enable-bcmath --enable-libxml --enable-inline-optimization --enable-gd-native-ttf --enable-mbregex --enable-mbstring --enable-opcache --enable-pcntl --enable-shmop --enable-soap --enable-sockets --enable-sysvsem --enable-xml --enable-zip
586 2016-06-30 11:29:55 ./configure --prefix=/usr/local/php7.0.8 --with-curl --with-freetype-dir --with-gd --with-gettext --with-iconv-dir --with-kerberos --with-libdir=lib64 --with-libxml-dir --with-mysqli --with-openssl --with-pcre-regex --with-pdo-mysql --with-pdo-sqlite --with-pear --with-png-dir --with-xmlrpc --with-xsl --with-zlib --enable-fpm --enable-bcmath --enable-libxml --enable-inline-optimization --enable-gd-native-ttf --enable-mbregex --enable-mbstring --enable-opcache --enable-pcntl --enable-shmop --enable-soap --enable-sockets --enable-sysvsem --enable-xml --enable-zip
588 2016-06-30 11:31:47 ./configure --prefix=/usr/local/php7.0.8 --with-curl --with-freetype-dir --with-gd --with-gettext --with-iconv-dir --with-kerberos --with-libdir=lib64 --with-libxml-dir --with-mysqli --with-openssl --with-pcre-regex --with-pdo-mysql --with-pdo-sqlite --with-pear --with-png-dir --with-xmlrpc --with-xsl --with-zlib --enable-fpm --enable-bcmath --enable-libxml --enable-inline-optimization --enable-gd-native-ttf --enable-mbregex --enable-mbstring --enable-opcache --enable-pcntl --enable-shmop --enable-soap --enable-sockets --enable-sysvsem --enable-xml --enable-zip
590 2016-06-30 11:32:45 ./configure --prefix=/usr/local/php7.0.8 --with-curl --with-freetype-dir --with-gd --with-gettext --with-iconv-dir --with-kerberos --with-libdir=lib64 --with-libxml-dir --with-mysqli --with-openssl --with-pcre-regex --with-pdo-mysql --with-pdo-sqlite --with-pear --with-png-dir --with-xmlrpc --with-xsl --with-zlib --enable-fpm --enable-bcmath --enable-libxml --enable-inline-optimization --enable-gd-native-ttf --enable-mbregex --enable-mbstring --enable-opcache --enable-pcntl --enable-shmop --enable-soap --enable-sockets --enable-sysvsem --enable-xml --enable-zip —enable-cli

三、PHP CLI

The CLI SAPI is enable by default using —enable-cli, but may be disabled using the —disable-cli option when running ./configure.

The name, location and existence of the CLI/CGI binaries will differ depending on how PHP is installed on your system. By default when executing make, both the CGI and CLI are built and placed as sapi/cgi/php-cgi and sapi/cli/php respectively, in your PHP source directory. You will note that both are name php. What happens during make install depends on your configure line. If a module SAPI is chosen during configure, such as apes, or the —disable-cgi option is used, the CLI is copied to {PREFIX}/bin/php during make install otherwise the CGI is placed there. So, for example, if —with-apes is in your configure line then the CLI is copied to {PREFIX}/bin/php during make install. If you want to override the installation of the CGI binary, use

php -r "copy('https://getcomposer.org/installer', 'composer-setup.php');"
php -r "if (hash_file('SHA384', 'composer-setup.php') === 'e115a8dc7871f15d853148a7fbac7da27d6c0030b848d9b3dc09e2a0388afed865e6a3d6b3c0fad45c48e2b5fc1196ae') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('composer-setup.php'); } echo PHP_EOL;"
php composer-setup.php
php -r "unlink('composer-setup.php');"

你可能感兴趣的:(PHP Configure)