DNS域名解析记录查询枚举
示例域名: zhaoka.com
字典文件: zhaoka.com.txt
DNSenum 命令:
基本使用:
dnsenum zhaoka.com
dnsenum --enum zhaoka.com
dnsenum zhaoka.com -f zhaoka.com.txt --threads 5
命令帮助:
dnsenum.pl VERSION:1.2.3
Usage: dnsenum.pl [Options]
[Options]:
Note: the brute force -f switch is obligatory.
GENERAL OPTIONS:
--dnsserver
Use this DNS server for A, NS and MX queries.
--enum Shortcut option equivalent to --threads 5 -s 15 -w.
-h, --help Print this help message.
--noreverse Skip the reverse lookup operations.
--nocolor Disable ANSIColor output.
--private Show and save private ips at the end of the file domain_ips.txt.
--subfile Write all valid subdomains to this file.
-t, --timeout The tcp and udp timeout values in seconds (default: 10s).
--threads The number of threads that will perform different queries.
-v, --verbose Be verbose: show all the progress and all the error messages.
GOOGLE SCRAPING OPTIONS:
-p, --pages The number of google search pages to process when scraping names,
the default is 5 pages, the -s switch must be specified.
-s, --scrap The maximum number of subdomains that will be scraped from Google (default 15).
BRUTE FORCE OPTIONS:
-f, --file Read subdomains from this file to perform brute force.
-u, --update
Update the file specified with the -f switch with valid subdomains.
a (all) Update using all results.
g Update using only google scraping results.
r Update using only reverse lookup results.
z Update using only zonetransfer results.
-r, --recursion Recursion on subdomains, brute force all discovred subdomains that have an NS record.
WHOIS NETRANGE OPTIONS:
-d, --delay The maximum value of seconds to wait between whois queries, the value is defined randomly, default:
3s. -w, --whois Perform the whois queries on c class network ranges.
**Warning**: this can generate very large netranges and it will take lot of time to performe rever
se lookups.REVERSE LOOKUP OPTIONS:
-e, --exclude
Exclude PTR records that match the regexp expression from reverse lookup results, useful on invalid
hostnames.OUTPUT OPTIONS:
-o --output Output in XML format. Can be imported in MagicTree (www.gremwell.com)
fierce 命令
简单使用:
fierce -dns zhaoka.com
使用字典
fierce -dns zhaoka.com -wordlist zhaoka.com.txt
多线程/指定DNS服务器/使用字典
# 只扫出 ns 记录其它都没扫出来
fierce -dns zhaoka.com -dnsserver 180.76.76.76 -threads 5 -wordlist zhaoka.com.txt
range 用法 (没试出来怎么用)
fierce -range 192.168.1.0-255 -dnsserver 192.168.1.8
命令帮助:
Options:
-connect Attempt to make http connections to any non RFC1918
(public) addresses. This will output the return headers but
be warned, this could take a long time against a company with
many targets, depending on network/machine lag. I wouldn't
recommend doing this unless it's a small company or you have a
lot of free time on your hands (could take hours-days).
Inside the file specified the text "Host:\n" will be replaced
by the host specified. Usage:
perl fierce.pl -dns example.com -connect headers.txt
-delay The number of seconds to wait between lookups.
-dns The domain you would like scanned.
-dnsfile Use DNS servers provided by a file (one per line) for
reverse lookups (brute force).
-dnsserver Use a particular DNS server for reverse lookups
(probably should be the DNS server of the target). Fierce
uses your DNS server for the initial SOA query and then uses
the target's DNS server for all additional queries by default.
-file A file you would like to output to be logged to.
-fulloutput When combined with -connect this will output everything
the webserver sends back, not just the HTTP headers.
-help This screen.
-nopattern Don't use a search pattern when looking for nearby
hosts. Instead dump everything. This is really noisy but
is useful for finding other domains that spammers might be
using. It will also give you lots of false positives,
especially on large domains.
-range Scan an internal IP range (must be combined with
-dnsserver). Note, that this does not support a pattern
and will simply output anything it finds. Usage:
perl fierce.pl -range 111.222.333.0-255 -dnsserver ns1.example.co
-search Search list. When fierce attempts to traverse up and
down ipspace it may encounter other servers within other
domains that may belong to the same company. If you supply a
comma delimited list to fierce it will report anything found.
This is especially useful if the corporate servers are named
different from the public facing website. Usage:
perl fierce.pl -dns examplecompany.com -search corpcompany,blahcompany
Note that using search could also greatly expand the number of
hosts found, as it will continue to traverse once it locates
servers that you specified in your search list. The more the
better.
-suppress Suppress all TTY output (when combined with -file).
-tcptimeout Specify a different timeout (default 10 seconds). You
may want to increase this if the DNS server you are querying
is slow or has a lot of network lag.
-threads Specify how many threads to use while scanning (default
is single threaded).
-traverse Specify a number of IPs above and below whatever IP you
have found to look for nearby IPs. Default is 5 above and
below. Traverse will not move into other C blocks.
-version Output the version number.
-wide Scan the entire class C after finding any matching
hostnames in that class C. This generates a lot more traffic
but can uncover a lot more information.
-wordlist Use a seperate wordlist (one word per line). Usage:
perl fierce.pl -dns examplecompany.com -wordlist dictionary.txt
host 命令:
查询 NS 记录 (域名解析服务器)
host -t ns zhaoka.com
zhaoka.com name server ns2.dnsv2.com.
zhaoka.com name server ns1.dnsv2.com.
查询 A 记录
host -t a zhaoka.com
zhaoka.com has address 122.224.178.105
查询 MX 记录
host -t mx zhaoka.com
zhaoka.com mail is handled by 5 mail.jsqix.com.
命令帮助:
host --help
host: illegal option -- -
Usage: host [-aCdlriTwv] [-c class] [-N ndots] [-t type] [-
W time] [-R number] [-m flag] hostname [server]
-a is equivalent to -v -t ANY
-c specifies query class for non-IN data
-C compares SOA records on authoritative nameservers
-d is equivalent to -v
-l lists all hosts in a domain, using AXFR
-i IP6.INT reverse lookups
-N changes the number of dots allowed before root lo
okup is done -r disables recursive processing
-R specifies number of retries for UDP packets
-s a SERVFAIL response should stop query
-t specifies the query type
-T enables TCP/IP mode
-v enables verbose output
-w specifies to wait forever for a reply
-W specifies how long to wait for a reply
-4 use IPv4 query transport only
-6 use IPv6 query transport only
-m set memory debugging flag (trace|record|usage)
-V print version number and exit
