CISCO PPPoE配置介绍

CISCO PPPoE配置介绍

下面我们分析一下CISCO PPPoE配置的内容。那么根据我们所示的案例，希望大家能够从以往的配置解析中找到相应的共同点，加深理解。

 

在路由器方面的设置非常多，这里我们主要讲解一下pppoe的配置。那么今天的路由器是CISCO路由器，具体的CISCO PPPoE配置就从下面来详细了解一下吧。

CISCO PPPoE配置如下：

Current configuration : 2496 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
aaa new-model
!
!
aaa group server radius pppoe
server 10.72.253.16 auth-port 1645 acct-port 1646
server 10.72.253.50 auth-port 1645 acct-port 1646
!
aaa authentication ppp default group pppoe
aaa authorization network default group pppoe
aaa accounting network default start-stop group pppoe
aaa session-id common
enable secret 5 $1$GJzG$hcJHvS/UMgYIf.GP3Xc/H1
!
username cisco password 0 cisco
ip subnet-zero
!
!
no ip domain-lookup
ip domain-name jxtvnet
ip name-server 10.72.255.131
!
ip audit notify log
ip audit po max-events 100
ip ssh time-out 120
ip ssh authentication-retries 3
vpdn enable
!
vpdn-group PPPOE
accept-dialin
protocol pppoe
virtual-template 10
pppoe limit max-sessions 500
!
async-bootp dns-server 10.72.255.131 10.72.255.132
!
crypto mib ipsec flowmib history tunnel size 200
crypto mib ipsec flowmib history failure size 200
interface Loopback0
ip address 10.1.1.1 255.255.255.0
!
interface GigabitEthernet0/0
no ip address
duplex full
speed 100
media-type rj45
pppoe enable
!
interface GigabitEthernet0/0.1
encapsulation dot1Q 1 native
ip address 172.19.4.254 255.255.255.248
!
interface GigabitEthernet0/0.2
encapsulation dot1Q 2
pppoe enable
!
interface GigabitEthernet0/0.3
encapsulation dot1Q 3
pppoe enable
!
interface GigabitEthernet0/0.4
encapsulation dot1Q 4
ip address 172.19.4.193 255.255.255.224
!
interface GigabitEthernet0/0.507
encapsulation dot1Q 507
pppoe enable
!
interface GigabitEthernet0/0.699
encapsulation dot1Q 699
pppoe enable
!
interface GigabitEthernet0/0.701
encapsulation dot1Q 701
pppoe enable
!
interface GigabitEthernet0/1
ip address 172.19.4.2 255.255.255.252
duplex full
speed 100
media-type rj45
!
interface Virtual-Template10
mtu 1492
ip unnumbered GigabitEthernet0/1
no peer default ip address
ppp authentication chap
!
ip classless
ip route 0.0.0.0 0.0.0.0 172.19.4.1
no ip http server
ip pim bidir-enable
!
!
snmp-server community jxnc-tv-ro RO
snmp-server community jxnc-tv-rw RW
!
!
radius-server host 10.72.253.16 auth-port 1645 acct-port 1646 key cisco
radius-server host 10.72.253.50 auth-port 1645 acct-port 1646 key cisco
radius-server retransmit 3
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
!
!
gatekeeper
shutdown
!
!
line con 0
login authentication no_tacacs
line aux 0
line vty 0 4
password cisco
!
!
end

CISCO PPPoE配置说明：

做了一个PPPOE RADIUS SERVER组，目的是提高网络的可靠性。相关配置：

aaa new-model
!
!
aaa group server radius pppoe
server 10.72.253.16 auth-port 1645 acct-port 1646
server 10.72.253.50 auth-port 1645 acct-port 1646
!
aaa authentication ppp default group pppoe
aaa authorization network default group pppoe
aaa accounting network default start-stop group pppoe
aaa session-id common
radius-server host 10.72.253.16 auth-port 1645 acct-port 1646 key cisco
radius-server host 10.72.253.50 auth-port 1645 acct-port 1646 key cisco
radius-server retransmit 3