手动配置电脑ip 外网的网线连接无线路由器的wan口 电脑连接无线路由器lan口（不能用无线连接必须有线连接）
路由的ip地址 192.168.1.1 子网掩码 255.255.255.0
路由器的 DHCP服务 和upnp 关闭
虚拟机服务
VMware NAT Service
VMware DHCP Service 这两项必须开启
下载Wiwiz的虚拟机镜像。下载后解压缩到本地硬盘。双击解压缩后的扩展名是.vmx的文件，VMWare就会自动启动虚拟机
打开虚拟机 选择 移动它
等待虚拟机启动加载完成，直到出现“wiwiz login: ”字样
输入 root
密码 wiwiz-user 上面不会有显示
然后输入
# /usr/local/hsbuilder/hsbuilder_setup.sh setup
选择
piease select external NIC typically the one going out to the inernet
eth0
piease select internal NIC typically wifi interface
eth1
piease input hotspot ID
你的无线热点ID
piease input user name
你的wiwiz登录账号
piease input server address and
cp.wiwiz.com:80,cp.wiwiz.co.cc:80,cp2.wiwiz.com:80,cp3.wiwiz.com
:80,125,39,111,239:80,123.150.173.239:80,74.117.62.157:80
Do you want DHCP service to be configured? lf you select NO to skip
it, you need to configure DHCP service manually later.
yes
DHCP setting: piease input Network ip
192.168.1.0
DHCP setting:piease input NETMASK
255.255.255.0
DHCP setting:piease input IP of Gateway (it should be the IP of this machine)
193.168.1.250
DHCP setting please input DNS
192.168.124.2
DHCP setting please input IP Range of this Network
192.168.1.10 192.168.1.249
DHCP SERVICE CONFIGURATION completed. THE new
conf iguration file is saved to
/etc/dhcpd.conf.the old conf iguration file isbacked up to /etc/dhcpd.conf.bak
ok
本文章由http://www.wifidog.pro/2015/06/01/wiwiz%E8%99%9A%E6%8B%9F%E6%9C%BA%E8%AF%A6%E7%BB%86%E6%95%99%E7%A8%8B.html整理编辑，转载请注明出处