LeetCode:Unique Paths I II

Unique Paths

A robot is located at the top-left corner of a m x n grid (marked 'Start' in the diagram below).

The robot can only move either down or right at any point in time. The robot is trying to reach the bottom-right corner of the grid (marked 'Finish' in the diagram below).

How many possible unique paths are there?

Above is a 3 x 7 grid. How many possible unique paths are there?

Note: m and n will be at most 100.

算法1：最容易想到的是递归解法，uniquePaths(m, n) = uniquePaths(m, n-1) + uniquePaths(m-1, n), 递归结束条件是m或n等于1，这个方法oj超时了

1 class Solution {

2 public:

3     int uniquePaths(int m, int n) {

4         if(m == 1 || n == 1)return 1;

5         else return  uniquePaths(m, n - 1) + uniquePaths(m - 1, n);

6     }

7 };

算法2：动态规划，算法1的递归解法中，其实我们计算了很多重复的子问题，比如计算uniquePaths(4, 5) 和 uniquePaths(5, 3)时都要计算子问题uniquePaths(3, 2)，再者由于uniquePaths(m, n) = uniquePaths(n, m)，这也使得许多子问题被重复计算了。要保存子问题的状态，这样很自然的就想到了动态规划方法，设dp[i][j] = uniquePaths(i, j)， 那么动态规划方程为：

• dp[i][j] = dp[i-1][j] + dp[i][j-1]
• 边界条件：dp[i][1] = 1, dp[1][j] = 1

 1 class Solution {

 2 public:

 3     int uniquePaths(int m, int n) {

 4         vector<vector<int> > dp(m+1, vector<int>(n+1, 1));

 5         for(int i = 2; i <= m; i++)

 6             for(int j = 2; j <= n; j++)

 7                 dp[i][j] = dp[i-1][j] + dp[i][j-1];

 8         return dp[m][n];

 9     }

10 };

上述过程其实是从左上角开始，逐行计算到达每个格子的路线数目，由递推公式可以看出，到达当前格子的路线数目和两个格子有关：1、上一行同列格子的路线数目；2、同一行上一列格子的路线数目。据此我们可以优化上面动态规划方法的空间:

 1 class Solution {

 2 public:

 3     int uniquePaths(int m, int n) {

 4         vector<int>dp(n+1, 1);

 5         for(int i = 2; i <= m; i++)

 6             for(int j = 2; j <= n; j++)

 7                 dp[j] =  dp[j] + dp[j-1];

 8         return dp[n];

 9     }

10 };

算法3：其实这个和组合数有关，对于m*n的网格，从左上角走到右下角，总共需要走m+n-2步，其中必定有m-1步是朝右走，n-1步是朝下走，那么这个问题的答案就是组合数：, 这里需要注意的是求组合数时防止乘法溢出         本文地址

 1 class Solution {

 2 public:

 3     int uniquePaths(int m, int n) {

 4         return combination(m+n-2, m-1);

 5     }

 6     

 7     int combination(int a, int b)

 8     {

 9         if(b > (a >> 1))b = a - b;

10         long long res = 1;

11         for(int i = 1; i <= b; i++)

12             res = res * (a - i + 1) / i;

13         return res;

14     }

15 };

 

---

 

Unique Paths II

Follow up for "Unique Paths":

Now consider if some obstacles are added to the grids. How many unique paths would there be?

An obstacle and empty space is marked as 1 and 0 respectively in the grid.

For example,

There is one obstacle in the middle of a 3x3 grid as illustrated below.

[

  [0,0,0],

  [0,1,0],

  [0,0,0]

]

The total number of unique paths is 2.

Note: m and n will be at most 100.

这一题可以完全采用和上一题一样的解法，只是需要注意dp的初始化值，和循环的起始值

 1 class Solution {

 2 public:

 3     int uniquePathsWithObstacles(vector<vector<int> > &obstacleGrid) {

 4         int m = obstacleGrid.size(), n = obstacleGrid[0].size();

 5         vector<int>dp(n+1, 0);

 6         dp[1] = (obstacleGrid[0][0] == 0) ? 1 : 0;

 7         for(int i = 1; i <= m; i++)

 8             for(int j = 1; j <= n; j++)

 9                 if(obstacleGrid[i-1][j-1] == 0)

10                     dp[j] = dp[j] + dp[j-1];

11                 else dp[j] = 0;

12         return dp[n];

13     }

14 };

 

【版权声明】转载请注明出处：http://www.cnblogs.com/TenosDoIt/p/3704091.html