oracle中查看执行计划常用的方法

本文介绍了oracle中查看执行计划常用的方法。
1、EXPLAIN PLAN命令
2、AUTOTRACE开关
3、DBMS_XPLAN
4、10046事件

1、EXPLAIN PLAN命令

 SQL> explain plan for select * from t where object_id=101151;

 Explained.

 SQL> select * from table(dbms_xplan.display);

 PLAN_TABLE_OUTPUT
 ---------------------------------------------------------------------
 Plan hash value: 470836197

 ---------------------------------------------------------------------
 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
 ---------------------------------------------------------------------
 | 0 | SELECT STATEMENT | | 1 | 158 | 2 (0)| 00:00:01 |
 | 1 | TABLE ACCESS BY INDEX ROWID| T | 1 | 158 | 2 (0)| 00:00:01 |
 |* 2 | INDEX RANGE SCAN | T_IDX | 1 | | 1 (0)| 00:00:01 |
 ---------------------------------------------------------------------

 Predicate Information (identified by operation id):

 PLAN_TABLE_OUTPUT
 ---------------------------------------------------------------------

    2 - access("OBJECT_ID"=101151)

==》1、SQL没有被实际执行，所以得到的执行计划可能是不准确的，尤其是包含绑定变量时。

        2、PL/SQL Developer中的F5快捷键就是调用的explain plan命令

       3、因没被实际执行，能快速返回执行计划

2、AUTOTRACE开关

语法： set autotrace

Usage: SET AUTOT[RACE] {OFF | ON | TRACE[ONLY]} [EXP[LAIN]] [STAT[ISTICS]]

示例：

 SQL> set autot on
 SQL> select object_name from t where object_id=999;

 OBJECT_NAME
 ------------------------------
 INCFIL

 Execution Plan
 ----------------------------------------------------------
 Plan hash value: 1601196873

 --------------------------------------------------------------------------
 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
 --------------------------------------------------------------------------
 | 0 | SELECT STATEMENT | | 1 | 30 | 281 (1)| 00:00:04 |
 |* 1 | TABLE ACCESS FULL| T | 1 | 30 | 281 (1)| 00:00:04 |
 --------------------------------------------------------------------------

 Predicate Information (identified by operation id):
 ---------------------------------------------------
    1 - filter("OBJECT_ID"=999)
 Statistics
 ----------------------------------------------------------
           1 recursive calls
           0 db block gets
        1031 consistent gets
        1027 physical reads
           0 redo size
         533 bytes sent via SQL*Net to client
         523 bytes received via SQL*Net from client
           2 SQL*Net roundtrips to/from client
           0 sorts (memory)
           0 sorts (disk)
           1 rows processed

==>  1.该命令在sqlplus中使用。

       2.除了执行计划外，还能看到相关的统计信息。

       3.即使实际被执行获取的执行计划也可能不是正确的。

explain plan,AUTOTRACE无法获取真实执行计划示例：

 SQL> var a number;
 SQL> var b number;
 SQL> exec :a :=0;

 PL/SQL procedure successfully completed.

 SQL> exec :b :=70000;

 PL/SQL procedure successfully completed.
 SQL> explain plan for select count(*) from t where object_id between :a and :b;

 Explained.

 SQL> select * from table(dbms_xplan.display);

 PLAN_TABLE_OUTPUT
 --------------------------------------------------------------------------------
 Plan hash value: 2213771543

 ----------------------------------------------------------------------------
 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
 ----------------------------------------------------------------------------
 | 0 | SELECT STATEMENT | | 1 | 5 | 2 (0)| 00:00:01 |
 | 1 | SORT AGGREGATE | | 1 | 5 | | |
 |* 2 | FILTER | | | | | |
 |* 3 | INDEX RANGE SCAN| T_IDX | 180 | 900 | 2 (0)| 00:00:01 |
 ----------------------------------------------------------------------------
 。。。。省略部分

 SQL> set autot traceonly
 SQL> select count(*) from t where object_id between :a and :b;
 Execution Plan
 ----------------------------------------------------------
 Plan hash value: 2213771543

 ----------------------------------------------------------------------------
 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
 ----------------------------------------------------------------------------
 | 0 | SELECT STATEMENT | | 1 | 5 | 2 (0)| 00:00:01 |
 | 1 | SORT AGGREGATE | | 1 | 5 | | |
 |* 2 | FILTER | | | | | |
 |* 3 | INDEX RANGE SCAN| T_IDX | 180 | 900 | 2 (0)| 00:00:01 |
 。。。省略部分

 SQL> select count(*) from t where object_id between :a and :b;

   COUNT(*)
 ----------
     136544

 SQL> select * from table(dbms_xplan.display_cursor(null,null,'advanced'));

 PLAN_TABLE_OUTPUT
 --------------------------------------------------------------------------------
 SQL_ID 9cgwqzzvtw8wc, child number 0
 -------------------------------------
  select count(*) from t where object_id between :a and :b

 Plan hash value: 853742775

 --------------------------------------------------------------------------------
 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
 --------------------------------------------------------------------------------
 | 0 | SELECT STATEMENT | | | | 45 (100)| |
 | 1 | SORT AGGREGATE | | 1 | 5 | | |

 PLAN_TABLE_OUTPUT
 --------------------------------------------------------------------------------
 |* 2 | FILTER | | | | | |
 |* 3 | INDEX FAST FULL SCAN| T_IDX | 50561 | 246K| 45 (0)| 00:00:01 |

。。。省略部分

==》真实的执行计划应该是 INDEX  FAST FULL SCAN

3、DBMS_XPLAN

DBMS_XPLANB包的常用子程序为：

DISPLAY：配合explain plan for 使用

DISPLAY_CURSOR：适用于sqlplus刚刚执行过的sql执行计划，或在存储在shared pool中的执行计划。

DISPLAY_AWR：sql的执行计划从shared pool中aga out后，如果执行计划被采集到awr报告中，那么就可以使用该方法查看执行计划。

示例：

 SQL> select status from t where owner=user;
 VALID
 VALID
 VALID
 。。。省略部分

 31206 rows selected.

 SQL> select * from table(dbms_xplan.display_cursor(null,null,'advanced'));

 PLAN_TABLE_OUTPUT
 -----------------------------------------------------------------------------------------
 SQL_ID 7m7b6un3xtss3, child number 0
 -------------------------------------
 select status from t where owner=user

 Plan hash value: 47527108

 ------------------------------------------------------------------------------------------
 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
 ------------------------------------------------------------------------------------------
 | 0 | SELECT STATEMENT | | | | 13 (100)| |
 | 1 | TABLE ACCESS BY INDEX ROWID| T | 2255 | 27060 | 13 (0)| 00:00:01 |
 |* 2 | INDEX RANGE SCAN | DESC_T_INX | 70 | | 10 (0)| 00:00:01 |
 ------------------------------------------------------------------------------------------

 Query Block Name / Object Alias (identified by operation id):
 -------------------------------------------------------------

    1 - SEL$1 / T@SEL$1
    2 - SEL$1 / T@SEL$1

 Outline Data
 -------------

   /*+
       BEGIN_OUTLINE_DATA
       IGNORE_OPTIM_EMBEDDED_HINTS
       OPTIMIZER_FEATURES_ENABLE('11.2.0.1')
       DB_VERSION('11.2.0.1')
       ALL_ROWS
       OUTLINE_LEAF(@"SEL$1")
       INDEX_RS_ASC(@"SEL$1" "T"@"SEL$1" "DESC_T_INX")
       END_OUTLINE_DATA
   */

 Predicate Information (identified by operation id):
 ---------------------------------------------------

    2 - access("T"."SYS_NC00016$"=SYS_OP_DESCEND(USER@!))
        filter(SYS_OP_UNDESCEND("T"."SYS_NC00016$")=USER@!)

 Column Projection Information (identified by operation id):
 -----------------------------------------------------------

    1 - "STATUS"[VARCHAR2,7]
    2 - "T".ROWID[ROWID,10], "T"."SYS_NC00016$"[RAW,46]

 46 rows selected.

==>1.相比AUTOTRACE开关来说看不到相关的统计信息，而且要等到语句执行完成。但获得的执行计划是真实的

       2.这里format参数为advanced,相比较于参数all,多了Outline Data这部分的信息输出

       3.这里的Rows列值为估计值，要想看到真实值可以将format参数设置为'ALLSTATS LAST'

format参数设置为'ALLSTATS LAST'示例：

 SQL> alter session set statistics_level =all;

 Session altered.

  SQL> select status from t where owner=user;
 VALID
 VALID
 VALID
 。。。。。省略部分

 31206 rows selected.

 SQL> select * from table(dbms_xplan.display_cursor(null,null,'allstats last'));

 PLAN_TABLE_OUTPUT
 --------------------------------------------------------------------------------------------------------------
 SQL_ID 7m7b6un3xtss3, child number 1
 -------------------------------------
 select status from t where owner=user

 Plan hash value: 47527108

 -------------------------------------------------------------------------------------------------------------
 | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads |
 -------------------------------------------------------------------------------------------------------------
 | 0 | SELECT STATEMENT | | 1 | | 31206 |00:00:00.05 | 5555 | 829 |
 | 1 | TABLE ACCESS BY INDEX ROWID| T | 1 | 2255 | 31206 |00:00:00.05 | 5555 | 829 |
 |* 2 | INDEX RANGE SCAN | DESC_T_INX | 1 | 70 | 31206 |00:00:00.02 | 2190 | 114 |
 -------------------------------------------------------------------------------------------------------------

 Predicate Information (identified by operation id):
 ---------------------------------------------------

    2 - access("T"."SYS_NC00016$"=SYS_OP_DESCEND(USER@!))
        filter(SYS_OP_UNDESCEND("T"."SYS_NC00016$")=USER@!)

==》和advanced参数相比，少了部分输出，但是能够看到每一步获取的实际记录数。

 输入sqlid来查看执行计划示例：

 SQL> select sql_text,sql_id,version_count,executions from v$sqlarea where sql_text like 'select status from t where owner=user';

 SQL_TEXT SQL_ID VERSION_COUNT EXECUTIONS
 ---------------------------------------- ------------- ------------- ----------
 select status from t where owner=user 7m7b6un3xtss3 2 3

 SQL> select * from table(dbms_xplan.display_cursor('7m7b6un3xtss3',0,'advanced'));

 PLAN_TABLE_OUTPUT
 --------------------------------------------------------------------------------
 SQL_ID 7m7b6un3xtss3, child number 0
 -------------------------------------
 select status from t where owner=user

 Plan hash value: 47527108

 ------------------------------------------------------------------------------------------
 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
 ------------------------------------------------------------------------------------------
 | 0 | SELECT STATEMENT | | | | 13 (100)| |
 | 1 | TABLE ACCESS BY INDEX ROWID| T | 2255 | 27060 | 13 (0)| 00:00:01 |
 |* 2 | INDEX RANGE SCAN | DESC_T_INX | 70 | | 10 (0)| 00:00:01 |
 ------------------------------------------------------------------------------------------

 Query Block Name / Object Alias (identified by operation id):
 -------------------------------------------------------------

    1 - SEL$1 / T@SEL$1
    2 - SEL$1 / T@SEL$1

 Outline Data
 -------------

   /*+
       BEGIN_OUTLINE_DATA
       IGNORE_OPTIM_EMBEDDED_HINTS
       OPTIMIZER_FEATURES_ENABLE('11.2.0.1')
       DB_VERSION('11.2.0.1')
       ALL_ROWS
       OUTLINE_LEAF(@"SEL$1")
       INDEX_RS_ASC(@"SEL$1" "T"@"SEL$1" "DESC_T_INX")
       END_OUTLINE_DATA
   */

 Predicate Information (identified by operation id):
 ---------------------------------------------------

    2 - access("T"."SYS_NC00016$"=SYS_OP_DESCEND(USER@!))
        filter(SYS_OP_UNDESCEND("T"."SYS_NC00016$")=USER@!)

 Column Projection Information (identified by operation id):
 -----------------------------------------------------------

    1 - "STATUS"[VARCHAR2,7]
    2 - "T".ROWID[ROWID,10], "T"."SYS_NC00016$"[RAW,46]

display_awr 示例：

 SQL> select sql_text,sql_id,version_count,executions from v$sqlarea where sql_text like 'select status from t where owner=user';

 no rows selected

 SQL> select * from table(dbms_xplan.display_cursor('7m7b6un3xtss3',0,'advanced'));

 PLAN_TABLE_OUTPUT
 -------------------------------------------------------------------------
 SQL_ID: 7m7b6un3xtss3, child number: 0 cannot be found


 SQL> select * from table(dbms_xplan.display_awr('7m7b6un3xtss3'));

 PLAN_TABLE_OUTPUT
 -------------------------------------------------------------------------
 SQL_ID 7m7b6un3xtss3
 --------------------
 select status from t where owner=user

 Plan hash value: 47527108

 --------------------------------------------------------------------------
 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
 --------------------------------------------------------------------------
 | 0 | SELECT STATEMENT | | | | 13 (100)| |
 | 1 | TABLE ACCESS BY INDEX ROWID| T | 2255 | 27060 | 13 (0)| 00:00:01 |
 | 2 | INDEX RANGE SCAN | DESC_T_INX | 70 | | 10 (0)| 00:00:01 |

==>1、相同的执行计划也可以通过@?/rdbms/admin/awrsqrpt 命令获取。

4、10046方式

 SQL> alter session set tracefile_identifier=plan_10046;

 Session altered.

 SQL> alter session set events '10046 trace name context forever,level 12';

 Session altered.

  SQL> select status from t where owner=user;
 VALID
 VALID
 VALID
 。。。省略部分

 31206 rows selected.

 SQL>
 SQL> alter session set events '10046 trace name context off';

 Session altered.

==>可以根据diagnostic_dest 参数找到plan_10046的文件。

使用tkprof进行输出：

 [ora11@ora12c ~]$ tkprof /ora11_10/ora11/diag/rdbms/ora11/ora11/trace/ora11_ora_26758_PLAN_10046.trc PLAN_10046.trc

 TKPROF: Release 11.2.0.1.0 - Development on Tue Aug 15 21:14:49 2017

 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.


 SQL ID: 57fcnar0x2buq
 Plan Hash: 47527108
 select status
 from
  t where owner=user

 call count cpu elapsed disk query current rows
 ------- ------ -------- ---------- ---------- ---------- ---------- ----------
 Parse 1 0.00 0.00 11 57 0 0
 Execute 1 0.00 0.00 0 0 0 0
 Fetch 2082 0.13 0.13 1007 5555 0 31206
 ------- ------ -------- ---------- ---------- ---------- ---------- ----------
 total 2084 0.14 0.13 1018 5612 0 31206

 Misses in library cache during parse: 1
 Optimizer mode: ALL_ROWS
 Parsing user id: SYS

 Rows Row Source Operation
 ------- ---------------------------------------------------
   31206 TABLE ACCESS BY INDEX ROWID T (cr=5555 pr=1007 pw=0 time=76792 us cost=13 size=27060 card=2255)
   31206 INDEX RANGE SCAN DESC_T_INX (cr=2190 pr=114 pw=0 time=29158 us cost=10 size=0 card=70)(object id 99885)

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/25923810/viewspace-2144083/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/25923810/viewspace-2144083/