CentOS Linux release 7.6.1810全新安装 Zimbra 8.8.12邮箱

1.1  基础环境配置

1.1.1  主机名配置

[root@mail ~]# hostnamectl --static set-hostname mail.example.com
[root@mail ~]# hostname
mail.example.com

1.1.2  hosts解析配置

[root@mail ~]# echo "192.168.x.x mail.example.com mail" >> /etc/hosts
[root@mail ~]# cat /etc/hosts | tail -1
192.168.x.x mail.example.com mail

1.1.3  iptables配置

[root@mail ~]# iptables -A INPUT -p tcp -m multiport --dport 80,443,25,110,143,465,389,995,993,587,7025,8443,7071 -j ACCEPT

1.2  安装配置bind

1.2.1  安装bind

[root@mail ~]# yum install bind bind-utils -y

1.2.2  启动named服务并设置随开机启动

[root@mail ~]# systemctl enable named
[root@mail ~]# systemctl start named

1.2.3  修改/etc/named.conf主配置文件

[root@mail ~]# vim /etc/named.conf 
           attacks. Implementing BCP38 within your network would greatly
//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
// server as a caching only nameserver (as a localhost DNS resolver only).
//
// See /usr/share/doc/bind*/sample/ for example named configuration files.
//
// See the BIND Administrator's Reference Manual (ARM) for details about the
// configuration located in /usr/share/doc/bind-{version}/Bv9ARM.html

options {
        listen-on port 53 { 127.0.0.1;192.168.x.0/24; };
        listen-on-v6 port 53 { ::1; };
        directory       "/var/named";
        dump-file       "/var/named/data/cache_dump.db";
        statistics-file "/var/named/data/named_stats.txt";
        memstatistics-file "/var/named/data/named_mem_stats.txt";
        recursing-file  "/var/named/data/named.recursing";
        secroots-file   "/var/named/data/named.secroots";
        allow-query     { localhost;192.168.x.0/24; };

        /* 
         - If you are building an AUTHORITATIVE DNS server, do NOT enable recursion.
         - If you are building a RECURSIVE (caching) DNS server, you need to enable 
           recursion. 
         - If your recursive DNS server has a public IP address, you MUST enable access 
           control to limit queries to your legitimate users. Failing to do so will
           cause your server to become part of large scale DNS amplification 
           attacks. Implementing BCP38 within your network would greatly
           reduce such attack surface 
        */
        recursion yes;

        dnssec-enable yes;
        dnssec-validation yes;

        /* Path to ISC DLV key */
        bindkeys-file "/etc/named.iscdlv.key";

        managed-keys-directory "/var/named/dynamic";

        pid-file "/run/named/named.pid";
        session-keyfile "/run/named/session.key";
};

logging {
        channel default_debug {
                file "data/named.run";
                severity dynamic;
        };
};

zone "." IN {
        type hint;
        file "named.ca";
};

include "/etc/named.rfc1912.zones";
include "/etc/named.root.key";
include "/etc/named.example.zones";

1.2.4  创建/etc/named.example.zones区域配置文件

[root@mail ~]# vim /etc/named.example.zones 

//erp.com.zone Domain resolve IP
zone "example.com" IN {
        type master;
        file "example.com.zone";
};

//x.168.192.zone IP resolve Domain
zone "x.168.192.in-addr.arpa" IN {
        type master;
        file "x.168.192.zone";
};

1.2.5  创建正向解析配置文件/var/named/example.com.zone 

[root@mail ~]# vim /var/named/example.com.zone 
$TTL 1D
@       IN SOA  @ example.com. (
                                20190607        ; serial
                                        1D      ; refresh
                                        1H      ; retry
                                        1W      ; expire
                                        3H )    ; minimum
        NS      ns1.example.com.
        IN      MX 10    mail
        A       127.0.0.1
        AAAA    ::1
ns1     IN      A       192.168.x.x
dns01   IN      CNAME   ns1
mail    IN      A       192.168.x.x

1.2.6  创建反向解析配置文件/var/named/x.168.192.zone

[root@mail ~]# vim /var/named/x.168.192.zone 
$TTL 1D
@       IN SOA  @ ns1.example.com. (
                                20190607        ; serial
                                        1D      ; refresh
                                        1H      ; retry
                                        1W      ; expire
                                        3H )    ; minimum
        NS      ns1.example.com.
        A       127.0.0.1
        AAAA    ::1
        PTR     localhost.
x      PTR     ns1

1.2.7  更改配置文件相应的权限

[root@mail ~]# chown :named /etc/named.example.zones 
[root@mail ~]# chown :named /var/named/example.com.zone 
[root@mail ~]# chown :named /var/named/11.168.192.zone 

1.2.8  检查named配置文件语法是否正常

[root@mail ~]# named-checkconf 
[root@mail ~]# named-checkzone "example.com" /var/named/example.com.zone 
zone example.com/IN: loaded serial 20190607
OK
[root@mail ~]# named-checkzone "x.168.192.in-addr.arpa" /var/named/x.168.192.zone 
zone 11.168.192.in-addr.arpa/IN: loaded serial 20190607
OK

1.2.9  验证测试MX记录

[root@mail ~]# dig MX example.com

; <<>> DiG 9.9.4-RedHat-9.9.4-73.el7_6 <<>> MX example.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 11248
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 3

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
;; QUESTION SECTION:
;example.com.                  IN      MX

;; ANSWER SECTION:
example.com.           86400   IN      MX      10 mail.example.com.

;; AUTHORITY SECTION:
example.com.           86400   IN      NS      ns1.example.com.

;; ADDITIONAL SECTION:
mail.example.com.      86400   IN      A       192.168.x.x
ns1.example.com.       86400   IN      A       192.168.x.x

;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Tue Jun 11 16:53:11 CST 2019
;; MSG SIZE  rcvd: 112

1.3  安装配置zimbra

1.3.1  将下载好的zimbra上传至服务器,解压并改名

[root@mail opt]# tar zxvf zcs-8.8.12_GA_3794.RHEL7_64.20190329045002.tgz 
[root@mail opt]# mv zcs-8.8.12_GA_3794.RHEL7_64.20190329045002 zimbra

1.3.2  执行安装脚本./install.sh

[root@mail opt]# cd zimbra/
[root@mail zimbra]# ls
bin   docs        lib       readme_binary_en_US.txt  util
data  install.sh  packages  README.txt
[root@mail zimbra]# ./install.sh 

Operations logged to /tmp/install.log.DG9ri16l
Checking for existing installation...
    zimbra-drive...NOT FOUND
    zimbra-imapd...NOT FOUND
    zimbra-patch...NOT FOUND
    zimbra-mta-patch...NOT FOUND
    zimbra-proxy-patch...NOT FOUND
    zimbra-license-tools...NOT FOUND
    zimbra-license-extension...NOT FOUND
    zimbra-network-store...NOT FOUND
    zimbra-network-modules-ng...NOT FOUND
    zimbra-chat...NOT FOUND
    zimbra-talk...NOT FOUND
    zimbra-ldap...NOT FOUND
    zimbra-logger...NOT FOUND
    zimbra-mta...NOT FOUND
    zimbra-dnscache...NOT FOUND
    zimbra-snmp...NOT FOUND
    zimbra-store...NOT FOUND
    zimbra-apache...NOT FOUND
    zimbra-spell...NOT FOUND
    zimbra-convertd...NOT FOUND
    zimbra-memcached...NOT FOUND
    zimbra-proxy...NOT FOUND
    zimbra-archiving...NOT FOUND
    zimbra-core...NOT FOUND


----------------------------------------------------------------------
PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE.
SYNACOR, INC. ("SYNACOR") WILL ONLY LICENSE THIS SOFTWARE TO YOU IF YOU
FIRST ACCEPT THE TERMS OF THIS AGREEMENT. BY DOWNLOADING OR INSTALLING
THE SOFTWARE, OR USING THE PRODUCT, YOU ARE CONSENTING TO BE BOUND BY
THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS
AGREEMENT, THEN DO NOT DOWNLOAD, INSTALL OR USE THE PRODUCT.

License Terms for this Zimbra Collaboration Suite Software:
https://www.zimbra.com/license/zimbra-public-eula-2-6.html
----------------------------------------------------------------------



Do you agree with the terms of the software license agreement? [N] y





Use Zimbra's package repository [Y] y


Configuring package repository

Checking for installable packages

Found zimbra-core (local)
Found zimbra-ldap (local)
Found zimbra-logger (local)
Found zimbra-mta (local)
Found zimbra-dnscache (local)
Found zimbra-snmp (local)
Found zimbra-store (local)
Found zimbra-apache (local)
Found zimbra-spell (local)
Found zimbra-memcached (repo)
Found zimbra-proxy (local)
Found zimbra-drive (repo)
Found zimbra-imapd (local)
Found zimbra-patch (repo)
Found zimbra-mta-patch (repo)
Found zimbra-proxy-patch (repo)


The Zimbra Collaboration Server does not appear to be installed,
yet there appears to be a ZCS directory structure in /opt/zimbra.

Would you like to delete /opt/zimbra before installing? [N] n   

Select the packages to install

Install zimbra-ldap [Y] y

Install zimbra-logger [Y] y

Install zimbra-mta [Y] y

Install zimbra-dnscache [Y] n

Install zimbra-snmp [Y] y

Install zimbra-store [Y] y

Install zimbra-apache [Y] y

Install zimbra-spell [Y] y

Install zimbra-memcached [Y] y

Install zimbra-proxy [Y] y

Install zimbra-drive [Y] y

Install zimbra-imapd (BETA - for evaluation only) [N] n

Install zimbra-chat [Y] y
Checking required space for zimbra-core
Checking space for zimbra-store
Checking required packages for zimbra-store
zimbra-store package check complete.

Installing:
    zimbra-core
    zimbra-ldap
    zimbra-logger
    zimbra-mta
    zimbra-snmp
    zimbra-store
    zimbra-apache
    zimbra-spell
    zimbra-memcached
    zimbra-proxy
    zimbra-drive
    zimbra-patch
    zimbra-mta-patch
    zimbra-proxy-patch
    zimbra-chat

The system will be modified.  Continue? [N] y

Beginning Installation - see /tmp/install.log.DG9ri16l for details...

                          zimbra-core-components will be downloaded and installed.
                            zimbra-timezone-data will be installed.
                          zimbra-common-core-jar will be installed.
                         zimbra-common-mbox-conf will be installed.
                   zimbra-common-mbox-conf-attrs will be installed.
                    zimbra-common-mbox-conf-msgs will be installed.
                  zimbra-common-mbox-conf-rights will be installed.
                           zimbra-common-mbox-db will be installed.
                         zimbra-common-mbox-docs will be installed.
                   zimbra-common-mbox-native-lib will be installed.
                         zimbra-common-core-libs will be installed.
                                     zimbra-core will be installed.
                          zimbra-ldap-components will be downloaded and installed.
                                     zimbra-ldap will be installed.
                                   zimbra-logger will be installed.
                           zimbra-mta-components will be downloaded and installed.
                                      zimbra-mta will be installed.
                          zimbra-snmp-components will be downloaded and installed.
                                     zimbra-snmp will be installed.
                         zimbra-store-components will be downloaded and installed.
                       zimbra-jetty-distribution will be downloaded and installed.
                                zimbra-mbox-conf will be installed.
                                 zimbra-mbox-war will be installed.
                             zimbra-mbox-service will be installed.
                       zimbra-mbox-webclient-war will be installed.
                   zimbra-mbox-admin-console-war will be installed.
                          zimbra-mbox-store-libs will be installed.
                                    zimbra-store will be installed.
                        zimbra-apache-components will be downloaded and installed.
                                   zimbra-apache will be installed.
                         zimbra-spell-components will be downloaded and installed.
                                    zimbra-spell will be installed.
                                zimbra-memcached will be downloaded and installed.
                         zimbra-proxy-components will be downloaded and installed.
                                    zimbra-proxy will be installed.
                                    zimbra-drive will be downloaded and installed (later).
                                    zimbra-patch will be downloaded and installed (later).
                                zimbra-mta-patch will be downloaded and installed.
                              zimbra-proxy-patch will be downloaded and installed (later).
                                     zimbra-chat will be downloaded and installed (later).

Downloading packages (11):
   zimbra-core-components
   zimbra-ldap-components
   zimbra-mta-components
   zimbra-snmp-components
   zimbra-store-components
   zimbra-jetty-distribution
   zimbra-apache-components
   zimbra-spell-components
   zimbra-memcached
   zimbra-proxy-components
   zimbra-mta-patch
      ...done

Shutting down zimbra mail

Removing existing packages



Installing repo packages (11):
   zimbra-core-components
   zimbra-ldap-components
   zimbra-mta-components
   zimbra-snmp-components
   zimbra-store-components
   zimbra-jetty-distribution
   zimbra-apache-components
   zimbra-spell-components
   zimbra-memcached
   zimbra-proxy-components
   zimbra-mta-patch
      ...done

Installing local packages (25):
   zimbra-timezone-data
   zimbra-common-core-jar
   zimbra-common-mbox-conf
   zimbra-common-mbox-conf-attrs
   zimbra-common-mbox-conf-msgs
   zimbra-common-mbox-conf-rights
   zimbra-common-mbox-db
   zimbra-common-mbox-docs
   zimbra-common-mbox-native-lib
   zimbra-common-core-libs
   zimbra-core
   zimbra-ldap
   zimbra-logger
   zimbra-mta
   zimbra-snmp
   zimbra-mbox-conf
   zimbra-mbox-war
   zimbra-mbox-service
   zimbra-mbox-webclient-war
   zimbra-mbox-admin-console-war
   zimbra-mbox-store-libs
   zimbra-store
   zimbra-apache
   zimbra-spell
   zimbra-proxy
      ...done

Installing extra packages (4):
   zimbra-drive
   zimbra-patch
   zimbra-proxy-patch
   zimbra-chat
      ...done

Running Post Installation Configuration:
Operations logged to /tmp/zmsetup.20190611-120141.log
Installing LDAP configuration database...done.
Setting defaults...

DNS ERROR resolving MX for mail.example.com
It is suggested that the domain name have an MX record configured in DNS
Change domain name? [Yes] example.com
A Yes/No answer is required
Change domain name? [Yes] yes
Create domain: [mail.example.com] example.com
        MX: mail.example.com (192.168.x.x)

        Interface: 127.0.0.1
        Interface: 192.168.x.x
done.
Checking for port conflicts

Main menu

   1) Common Configuration:                                                  
   2) zimbra-ldap:                             Enabled                       
   3) zimbra-logger:                           Enabled                       
   4) zimbra-mta:                              Enabled                       
   5) zimbra-snmp:                             Enabled                       
   6) zimbra-store:                            Enabled                       
        +Create Admin User:                    yes                           
        +Admin user to create:                 [email protected]            
******* +Admin Password                        UNSET                         
        +Anti-virus quarantine user:           virus-[email protected]
        +Enable automated spam training:       yes                           
        +Spam training user:                   [email protected]   
        +Non-spam(Ham) training user:          [email protected]   
        +SMTP host:                            mail.example.com             
        +Web server HTTP port:                 8080                          
        +Web server HTTPS port:                8443                          
        +Web server mode:                      https                         
        +IMAP server port:                     7143                          
        +IMAP server SSL port:                 7993                          
        +POP server port:                      7110                          
        +POP server SSL port:                  7995                          
        +Use spell check server:               yes                           
        +Spell server URL:                     http://mail.example.com:7780/aspell.php
        +Enable version update checks:         TRUE                          
        +Enable version update notifications:  TRUE                          
        +Version update notification email:    [email protected]            
        +Version update source email:          [email protected]            
        +Install mailstore (service webapp):   yes                           
        +Install UI (zimbra,zimbraAdmin webapps): yes                           

   7) zimbra-spell:                            Enabled                       
   8) zimbra-proxy:                            Enabled                       
   9) Default Class of Service Configuration:                                
   s) Save config to file                                                    
   x) Expand menu                                                            
   q) Quit                                    

Address unconfigured (**) items  (? - help) 6


Store configuration

   1) Status:                                  Enabled                       
   2) Create Admin User:                       yes                           
   3) Admin user to create:                    [email protected]            
** 4) Admin Password                           UNSET                         
   5) Anti-virus quarantine user:              virus-[email protected]
   6) Enable automated spam training:          yes                           
   7) Spam training user:                      [email protected]   
   8) Non-spam(Ham) training user:             [email protected]   
   9) SMTP host:                               mail.example.com             
  10) Web server HTTP port:                    8080                          
  11) Web server HTTPS port:                   8443                          
  12) Web server mode:                         https                         
  13) IMAP server port:                        7143                          
  14) IMAP server SSL port:                    7993                          
  15) POP server port:                         7110                          
  16) POP server SSL port:                     7995                          
  17) Use spell check server:                  yes                           
  18) Spell server URL:                        http://mail.example.com:7780/aspell.php
  19) Enable version update checks:            TRUE                          
  20) Enable version update notifications:     TRUE                          
  21) Version update notification email:       [email protected]            
  22) Version update source email:             [email protected]            
  23) Install mailstore (service webapp):      yes                           
  24) Install UI (zimbra,zimbraAdmin webapps): yes                           

Select, or 'r' for previous menu [r] 4

Password for [email protected] (min 6 characters): [wB7cQ5qdt] amar_s0ft.

Store configuration

   1) Status:                                  Enabled                       
   2) Create Admin User:                       yes                           
   3) Admin user to create:                    [email protected]            
   4) Admin Password                           set                           
   5) Anti-virus quarantine user:              virus-[email protected]
   6) Enable automated spam training:          yes                           
   7) Spam training user:                      [email protected]   
   8) Non-spam(Ham) training user:             [email protected]   
   9) SMTP host:                               mail.example.com             
  10) Web server HTTP port:                    8080                          
  11) Web server HTTPS port:                   8443                          
  12) Web server mode:                         https                         
  13) IMAP server port:                        7143                          
  14) IMAP server SSL port:                    7993                          
  15) POP server port:                         7110                          
  16) POP server SSL port:                     7995                          
  17) Use spell check server:                  yes                           
  18) Spell server URL:                        http://mail.example.com:7780/aspell.php
  19) Enable version update checks:            TRUE                          
  20) Enable version update notifications:     TRUE                          
  21) Version update notification email:       [email protected]            
  22) Version update source email:             [email protected]            
  23) Install mailstore (service webapp):      yes                           
  24) Install UI (zimbra,zimbraAdmin webapps): yes                           

Select, or 'r' for previous menu [r] r

Main menu

   1) Common Configuration:                                                  
   2) zimbra-ldap:                             Enabled                       
   3) zimbra-logger:                           Enabled                       
   4) zimbra-mta:                              Enabled                       
   5) zimbra-snmp:                             Enabled                       
   6) zimbra-store:                            Enabled                       
   7) zimbra-spell:                            Enabled                       
   8) zimbra-proxy:                            Enabled                       
   9) Default Class of Service Configuration:                                
   s) Save config to file                                                    
   x) Expand menu                                                            
   q) Quit                                    

*** CONFIGURATION COMPLETE - press 'a' to apply
Select from menu, or press 'a' to apply config (? - help) a
Save configuration data to a file? [Yes] yes
Save config in file: [/opt/zimbra/config.718] 
Saving config in /opt/zimbra/config.718...done.
The system will be modified - continue? [No] yes
Operations logged to /tmp/zmsetup.20190611-120141.log
Setting local config values...done.
Initializing core config...Setting up CA...done.
Deploying CA to /opt/zimbra/conf/ca ...done.
Creating SSL zimbra-store certificate...done.
Creating new zimbra-ldap SSL certificate...done.
Creating new zimbra-mta SSL certificate...done.
Creating new zimbra-proxy SSL certificate...done.
Installing mailboxd SSL certificates...done.
Installing MTA SSL certificates...done.
Installing LDAP SSL certificate...done.
Installing Proxy SSL certificate...done.
Initializing ldap...done.
Setting replication password...done.
Setting Postfix password...done.
Setting amavis password...done.
Setting nginx password...done.
Setting BES searcher password...done.
Creating server entry for mail.example.com...done.
Setting Zimbra IP Mode...done.
Saving CA in ldap...done.
Saving SSL Certificate in ldap...done.
Setting spell check URL...done.
Setting service ports on mail.example.com...done.
Setting zimbraFeatureTasksEnabled=TRUE...done.
Setting zimbraFeatureBriefcasesEnabled=TRUE...done.
Checking current setting of zimbraReverseProxyAvailableLookupTargets
Querying LDAP for other mailstores
Searching LDAP for reverseProxyLookupTargets...done.
Adding mail.example.com to zimbraReverseProxyAvailableLookupTargets
Updating zimbraLDAPSchemaVersion to version '1537783098'
Setting TimeZone Preference...done.
Disabling strict server name enforcement on mail.example.com...done.
Initializing mta config...done.
Setting services on mail.example.com...done.
Adding mail.example.com to zimbraMailHostPool in default COS...done.
Creating domain example.com...done.
Setting default domain name...done.
Creating domain example.com...already exists.
Creating admin account [email protected]...done.
Creating root alias...done.
Creating postmaster alias...done.
Creating user [email protected]...done.
Creating user [email protected]...done.
Creating user virus[email protected]...done.
Setting spam training and Anti-virus quarantine accounts...done.
Initializing store sql database...done.
Setting zimbraSmtpHostname for mail.example.com...done.
Configuring SNMP...done.
Setting up syslog.conf...done.
Starting servers...Search error: Unable to determine enabled services from ldap.
Enabled services read from cache. Service list may be inaccurate.
done.
Installing common zimlets...
        com_zimbra_adminversioncheck...failed. This may impact system functionality.
        com_zimbra_attachcontacts...failed. This may impact system functionality.
        com_zimbra_attachmail...failed. This may impact system functionality.
        com_zimbra_bulkprovision...failed. This may impact system functionality.
        com_zimbra_cert_manager...failed. This may impact system functionality.
        com_zimbra_clientuploader...failed. This may impact system functionality.
        com_zimbra_date...failed. This may impact system functionality.
        com_zimbra_email...failed. This may impact system functionality.
        com_zimbra_mailarchive...failed. This may impact system functionality.
        com_zimbra_phone...failed. This may impact system functionality.
        com_zimbra_proxy_config...failed. This may impact system functionality.
        com_zimbra_srchhighlighter...failed. This may impact system functionality.
        com_zimbra_tooltip...failed. This may impact system functionality.
        com_zimbra_url...failed. This may impact system functionality.
        com_zimbra_viewmail...failed. This may impact system functionality.
        com_zimbra_webex...failed. This may impact system functionality.
        com_zimbra_ymemoticons...failed. This may impact system functionality.
        com_zextras_drive_open...failed. This may impact system functionality.
        com_zextras_chat_open...failed. This may impact system functionality.
Finished installing common zimlets.
Restarting mailboxd...done.
Creating galsync account for default domain...failed.

You have the option of notifying Zimbra of your installation.
This helps us to track the uptake of the Zimbra Collaboration Server.
The only information that will be transmitted is:
        The VERSION of zcs installed (8.8.12_GA_3794_RHEL7_64)
        The ADMIN EMAIL ADDRESS created ([email protected])

Notify Zimbra of your installation? [Yes] yes
Notifying Zimbra of installation via http://www.zimbra.com/cgi-bin/[email protected]

Notification complete

Checking if the NG started running...done. 
Setting up zimbra crontab...done.


Moving /tmp/zmsetup.20190611-120141.log to /opt/zimbra/log


Configuration complete - press return to exit 


[root@mail zimbra]# 

1.3.3  查看zimbra服务状态

[root@mail ~]# su - zimbra 
Last login: Tue Jun 11 15:19:39 CST 2019 on pts/1    
[zimbra@mail ~]$ zmcontrol status

Host mail.example.com
        amavis                  Running
        antispam                Running
        antivirus               Running
        ldap                    Running
        logger                  Running
        mailbox                 Running
        memcached               Running
        mta                     Running
        opendkim                Running
        proxy                   Running
        service webapp          Running
        snmp                    Running
        spell                   Running
        stats                   Running
        zimbra webapp           Running
        zimbraAdmin webapp      Running
        zimlet webapp           Running
        zmconfigd               Running
[zimbra@mail ~]$ 

1.3.4  客户端登录验证

1.3.4.1  管理员访问

CentOS Linux release 7.6.1810全新安装 Zimbra 8.8.12邮箱_第1张图片

1.3.4.2  普通用户访问

CentOS Linux release 7.6.1810全新安装 Zimbra 8.8.12邮箱_第2张图片

1.4  参考链接

1.4.1  相关文档

https://www.zimbra.com/documentation/
https://zimbra.github.io/installguides/latest/single.html#Installing_Zimbra_Collaboration_Software

 

转载于:https://www.cnblogs.com/Wolf-Dreams/p/11004930.html

你可能感兴趣的:(CentOS Linux release 7.6.1810全新安装 Zimbra 8.8.12邮箱)