Active Session History (ASH) Performed An Emergency Flush Messages In The Alert Log

Active Session History (ASH) Performed An Emergency Flush Messages In The Alert Log (文档 ID 1385872.1)

---

In this Document   Symptoms   Cause   Solution   This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process and therefore has not been subject to an independent technical review. APPLIES TO: Oracle Database - Enterprise Edition - Version 11.1.0.6 and later Information in this document applies to any platform. SYMPTOMS Periodically see the following message in the alert log. Active Session History (ASH) performed an emergency flush. This may mean that ASH is undersized. If emergency flushes are a recurring issue, you may consider increasing ASH size by setting the value of _ASH_SIZE to a sufficiently large value. Currently, ASH size is bytes. Both ASH size and the total number of emergency flushes since instance startup can be monitored by running the following query: select total_size,awr_flush_emergency_count from v$ash_info; CAUSE Typically some activity on system causes more active sessions, therefore filling the ASH buffers faster than usual causing this message to be displayed. It is not a problem per se, just indicates the buffers might need to be increased to support peak activity on the database. SOLUTION The current ASH size is displayed in the message in the alert log, or can be found using the following SQL statement. select total_size from v$ash_info; Then increase the value for _ash_size by some value, like 50% more than what is currently allocated.  For example if total_size = 16MB, then an increase of 50% more would be (16MB + (16MB * 50%)) = 24MB.  sqlplus / as sysdba alter system set "_ash_size"=25165824; You can verify the change using the following select: select total_size from v$ash_info;       示例：         生产环境告警日志：    Active Session History (ASH) performed an emergency flush. This may mean that ASH is undersized. If emergency flushes are a recurring issue, you may consider increasing ASH size by setting the value of     _ASH_SIZE to a sufficiently large value. Currently, ASH size is 16777216 bytes. Both ASH size and the total number of emergency flushes since instance startup can be monitored by running the following query: select total_size,awr_flush_emergency_count from v$ash_info;   查询及处理：    SQL> select total_size/1024/1024,awr_flush_emergency_count from v$ash_info ; TOTAL_SIZE/1024/1024  AWR_FLUSH_EMERGENCY_COUNT --------------------                   -------------------------         16                                                1 SQL> alter system set _ash_size"=25165824; System altered.   SQL> select total_size/1024/1024,awr_flush_emergency_count from v$ash_info; TOTAL_SIZE/1024/1024 AWR_FLUSH_EMERGENCY_COUNT --------------------              -------------------------            24                                     2

转载于:https://www.cnblogs.com/velion-oracle/p/5174481.html