注:如果环境不一样,请修改脚本中如下几个导出的环境变量为自己的环境变量,需要自己确定工具链版本及api版本
_ANDROID_NDK="android-ndk-r10b"
_ANDROID_EABI="arm-linux-androideabi-4.9"
_ANDROID_API="android-L"
以下是具体内容:(32、64稍有区别)
#! /bin/bash
# Cross-compile environment for Android on ARMv7 and x86
#
# Contents licensed under the terms of the OpenSSL license
# http://www.openssl.org/source/license.html
#
# See http://wiki.openssl.org/index.php/FIPS_Library_and_Android
# and http://wiki.openssl.org/index.php/Android
#####################################################################
ANDROID_NOD_ROOT="/home/aa/android-ndk-r10b"
_ANDROID_NOD_ROOT="/home/aa/android-ndk-r10b"
# Set ANDROID_NDK_ROOT to you NDK location. For example,
# /opt/android-ndk-r8e or /opt/android-ndk-r9. This can be done in a
# login script. If ANDROID_NDK_ROOT is not specified, the script will
# try to pick it up with the value of _ANDROID_NDK_ROOT below. If
# ANDROID_NDK_ROOT is set, then the value is ignored.
# _ANDROID_NDK="android-ndk-r8e"
_ANDROID_NDK="android-ndk-r10b"
# _ANDROID_NDK="android-ndk-r10"
# Set _ANDROID_EABI to the EABI you want to use. You can find the
# list in $ANDROID_NDK_ROOT/toolchains. This value is always used.
# _ANDROID_EABI="x86-4.6"
# _ANDROID_EABI="arm-linux-androideabi-4.6"
_ANDROID_EABI="arm-linux-androideabi-4.9"
# Set _ANDROID_ARCH to the architecture you are building for.
# This value is always used.
# _ANDROID_ARCH=arch-x86
_ANDROID_ARCH=arch-arm
# Set _ANDROID_API to the API you want to use. You should set it
# to one of: android-14, android-9, android-8, android-14, android-5
# android-4, or android-3. You can't set it to the latest (for
# example, API-17) because the NDK does not supply the platform. At
# Android 5.0, there will likely be another platform added (android-22?).
# This value is always used.
# _ANDROID_API="android-14"
#_ANDROID_API="android-24"
_ANDROID_API="android-L"
#####################################################################
# If the user did not specify the NDK location, try and pick it up.
# We expect something like ANDROID_NDK_ROOT=/opt/android-ndk-r8e
# or ANDROID_NDK_ROOT=/usr/local/android-ndk-r8e.
if [ -z "$ANDROID_NDK_ROOT" ]; then
_ANDROID_NDK_ROOT=""
if [ -z "$_ANDROID_NDK_ROOT" ] && [ -d "/usr/local/$_ANDROID_NDK" ]; then
_ANDROID_NDK_ROOT="/usr/local/$_ANDROID_NDK"
fi
if [ -z "$_ANDROID_NDK_ROOT" ] && [ -d "/opt/$_ANDROID_NDK" ]; then
_ANDROID_NDK_ROOT="/opt/$_ANDROID_NDK"
fi
if [ -z "$_ANDROID_NDK_ROOT" ] && [ -d "$HOME/$_ANDROID_NDK" ]; then
_ANDROID_NDK_ROOT="$HOME/$_ANDROID_NDK"
fi
if [ -z "$_ANDROID_NDK_ROOT" ] && [ -d "$PWD/$_ANDROID_NDK" ]; then
_ANDROID_NDK_ROOT="$PWD/$_ANDROID_NDK"
fi
# If a path was set, then export it
if [ ! -z "$_ANDROID_NDK_ROOT" ] && [ -d "$_ANDROID_NDK_ROOT" ]; then
export ANDROID_NDK_ROOT="$_ANDROID_NDK_ROOT"
fi
fi
# Error checking
# ANDROID_NDK_ROOT should always be set by the user (even when not running this script)
# http://groups.google.com/group/android-ndk/browse_thread/thread/a998e139aca71d77
if [ -z "$ANDROID_NDK_ROOT" ] || [ ! -d "$ANDROID_NDK_ROOT" ]; then
echo "Error: ANDROID_NDK_ROOT is not a valid path. Please edit this script."
# echo "$ANDROID_NDK_ROOT"
# exit 1
fi
# Error checking
if [ ! -d "$ANDROID_NDK_ROOT/toolchains" ]; then
echo "Error: ANDROID_NDK_ROOT/toolchains is not a valid path. Please edit this script."
# echo "$ANDROID_NDK_ROOT/toolchains"
# exit 1
fi
# Error checking
if [ ! -d "$ANDROID_NDK_ROOT/toolchains/$_ANDROID_EABI" ]; then
echo "Error: ANDROID_EABI is not a valid path. Please edit this script."
# echo "$ANDROID_NDK_ROOT/toolchains/$_ANDROID_EABI"
# exit 1
fi
#####################################################################
# Based on ANDROID_NDK_ROOT, try and pick up the required toolchain. We expect something like:
# /opt/android-ndk-r83/toolchains/arm-linux-androideabi-4.7/prebuilt/linux-x86_64/bin
# Once we locate the toolchain, we add it to the PATH. Note: this is the 'hard way' of
# doing things according to the NDK documentation for Ice Cream Sandwich.
# https://android.googlesource.com/platform/ndk/+/ics-mr0/docs/STANDALONE-TOOLCHAIN.html
ANDROID_TOOLCHAIN=""
for host in "linux-x86_64" "linux-x86" "darwin-x86_64" "darwin-x86"
do
if [ -d "$ANDROID_NDK_ROOT/toolchains/$_ANDROID_EABI/prebuilt/$host/bin" ]; then
ANDROID_TOOLCHAIN="$ANDROID_NDK_ROOT/toolchains/$_ANDROID_EABI/prebuilt/$host/bin"
break
fi
done
# Error checking
if [ -z "$ANDROID_TOOLCHAIN" ] || [ ! -d "$ANDROID_TOOLCHAIN" ]; then
echo "Error: ANDROID_TOOLCHAIN is not valid. Please edit this script."
# echo "$ANDROID_TOOLCHAIN"
# exit 1
fi
case $_ANDROID_ARCH in
arch-arm)
ANDROID_TOOLS="arm-linux-androideabi-gcc arm-linux-androideabi-ranlib arm-linux-androideabi-ld"
;;
arch-x86)
ANDROID_TOOLS="i686-linux-android-gcc i686-linux-android-ranlib i686-linux-android-ld"
;;
*)
echo "ERROR ERROR ERROR"
;;
esac
for tool in $ANDROID_TOOLS
do
# Error checking
if [ ! -e "$ANDROID_TOOLCHAIN/$tool" ]; then
echo "Error: Failed to find $tool. Please edit this script."
# echo "$ANDROID_TOOLCHAIN/$tool"
# exit 1
fi
done
# Only modify/export PATH if ANDROID_TOOLCHAIN good
if [ ! -z "$ANDROID_TOOLCHAIN" ]; then
export ANDROID_TOOLCHAIN="$ANDROID_TOOLCHAIN"
export PATH="$ANDROID_TOOLCHAIN":"$PATH"
fi
#####################################################################
# For the Android SYSROOT. Can be used on the command line with --sysroot
# https://android.googlesource.com/platform/ndk/+/ics-mr0/docs/STANDALONE-TOOLCHAIN.html
export ANDROID_SYSROOT="$ANDROID_NDK_ROOT/platforms/$_ANDROID_API/$_ANDROID_ARCH"
export CROSS_SYSROOT="$ANDROID_SYSROOT"
export NDK_SYSROOT="$ANDROID_SYSROOT"
# Error checking
if [ -z "$ANDROID_SYSROOT" ] || [ ! -d "$ANDROID_SYSROOT" ]; then
echo "Error: ANDROID_SYSROOT is not valid. Please edit this script."
# echo "$ANDROID_SYSROOT"
# exit 1
fi
#####################################################################
# If the user did not specify the FIPS_SIG location, try and pick it up
# If the user specified a bad location, then try and pick it up too.
if [ -z "$FIPS_SIG" ] || [ ! -e "$FIPS_SIG" ]; then
# Try and locate it
_FIPS_SIG=""
if [ -d "/usr/local/ssl/$_ANDROID_API" ]; then
_FIPS_SIG=`find "/usr/local/ssl/$_ANDROID_API" -name incore`
fi
if [ ! -e "$_FIPS_SIG" ]; then
_FIPS_SIG=`find $PWD -name incore`
fi
# If a path was set, then export it
if [ ! -z "$_FIPS_SIG" ] && [ -e "$_FIPS_SIG" ]; then
export FIPS_SIG="$_FIPS_SIG"
fi
fi
# Error checking. Its OK to ignore this if you are *not* building for FIPS
if [ -z "$FIPS_SIG" ] || [ ! -e "$FIPS_SIG" ]; then
echo "Error: FIPS_SIG does not specify incore module. Please edit this script."
# echo "$FIPS_SIG"
# exit 1
fi
#####################################################################
# Most of these should be OK (MACHINE, SYSTEM, ARCH). RELEASE is ignored.
export MACHINE=armv7
export RELEASE=2.6.37
export SYSTEM=android
export ARCH=armv7
export CROSS_COMPILE="arm-linux-androideabi-"
#export AR=arm-linux-androideabi-ar
export AS=arm-linux-androideabi-as
#export CC=arm-linux-androideabi-gcc
export CXX=arm-linux-androideabi-g++
export LD=arm-linux-androideabi-ld
export NM=arm-linux-androideabi-nm
export RANLIB=arm-linux-androideabi-ranlib
export STRIP=arm-linux-androideabi-strip
if [ "$_ANDROID_ARCH" == "arch-x86" ]; then
export MACHINE=i686
export RELEASE=2.6.37
export SYSTEM=android
export ARCH=x86
export CROSS_COMPILE="i686-linux-android-"
fi
# For the Android toolchain
# https://android.googlesource.com/platform/ndk/+/ics-mr0/docs/STANDALONE-TOOLCHAIN.html
export ANDROID_SYSROOT="$ANDROID_NDK_ROOT/platforms/$_ANDROID_API/$_ANDROID_ARCH"
export SYSROOT="$ANDROID_SYSROOT"
export NDK_SYSROOT="$ANDROID_SYSROOT"
export ANDROID_NDK_SYSROOT="$ANDROID_SYSROOT"
export ANDROID_API="$_ANDROID_API"
# CROSS_COMPILE and ANDROID_DEV are DFW (Don't Fiddle With). Its used by OpenSSL build system.
# export CROSS_COMPILE="arm-linux-androideabi-"
export ANDROID_DEV="$ANDROID_NDK_ROOT/platforms/$_ANDROID_API/$_ANDROID_ARCH/usr"
export HOSTCC=gcc
VERBOSE=1
if [ ! -z "$VERBOSE" ] && [ "$VERBOSE" != "0" ]; then
echo "ANDROID_NDK_ROOT: $ANDROID_NDK_ROOT"
echo "ANDROID_ARCH: $_ANDROID_ARCH"
echo "ANDROID_EABI: $_ANDROID_EABI"
echo "ANDROID_API: $ANDROID_API"
echo "ANDROID_SYSROOT: $ANDROID_SYSROOT"
echo "ANDROID_TOOLCHAIN: $ANDROID_TOOLCHAIN"
echo "FIPS_SIG: $FIPS_SIG"
echo "CROSS_COMPILE: $CROSS_COMPILE"
echo "ANDROID_DEV: $ANDROID_DEV"
echo "ARCH: $ARCH"
echo "AR: $AR"
echo "AS: $AS"
echo "CC: $CC"
echo "CXX: CXX"
echo "LD: $LD"
echo "NM: $NM"
echo "RANLIB: $RANLIB"
echo "STRIP: $STRIP"
fi
./config no-shared \
no-ssl2 \
no-ssl3 \
no-comp \
no-hw \
no-engine \
--openssldir=/home/aa/Downloads/openssl-1.1.0f/ssl/$ANDROID_API\
--prefix=/home/aa/Downloads/openssl-1.1.0f/openssl-output
make clean
make -j8
make install
三、编译
在终端执行命令:sudo ./setenv-android.sh
64位:
#!/bin/bash
# Cross-compile environment for Android on ARMv7 and x86
#
# Contents licensed under the terms of the OpenSSL license
# http://www.openssl.org/source/license.html
#
# See http://wiki.openssl.org/index.php/FIPS_Library_and_Android
# and http://wiki.openssl.org/index.php/Android
#####################################################################
ANDROID_NOD_ROOT="/home/aa/android-ndk-r10b"
_ANDROID_NOD_ROOT="/home/aa/android-ndk-r10b"
# Set ANDROID_NDK_ROOT to you NDK location. For example,
# /opt/android-ndk-r8e or /opt/android-ndk-r9. This can be done in a
# login script. If ANDROID_NDK_ROOT is not specified, the script will
# try to pick it up with the value of _ANDROID_NDK_ROOT below. If
# ANDROID_NDK_ROOT is set, then the value is ignored.
# _ANDROID_NDK="android-ndk-r8e"
_ANDROID_NDK="android-ndk-r10b"
# _ANDROID_NDK="android-ndk-r10"
# Set _ANDROID_EABI to the EABI you want to use. You can find the
# list in $ANDROID_NDK_ROOT/toolchains. This value is always used.
# _ANDROID_EABI="x86-4.6"
# _ANDROID_EABI="arm-linux-androideabi-4.6"
_ANDROID_EABI="aarch64-linux-android-4.9"
# Set _ANDROID_ARCH to the architecture you are building for.
# This value is always used.
# _ANDROID_ARCH=arch-x86
_ANDROID_ARCH=arch-arm64
# Set _ANDROID_API to the API you want to use. You should set it
# to one of: android-14, android-9, android-8, android-14, android-5
# android-4, or android-3. You can't set it to the latest (for
# example, API-17) because the NDK does not supply the platform. At
# Android 5.0, there will likely be another platform added (android-22?).
# This value is always used.
# _ANDROID_API="android-14"
_ANDROID_API="android-L"
# _ANDROID_API="android-19"
#####################################################################
# If the user did not specify the NDK location, try and pick it up.
# We expect something like ANDROID_NDK_ROOT=/opt/android-ndk-r8e
# or ANDROID_NDK_ROOT=/usr/local/android-ndk-r8e.
if [ -z "$ANDROID_NDK_ROOT" ]; then
_ANDROID_NDK_ROOT=""
if [ -z "$_ANDROID_NDK_ROOT" ] && [ -d "/usr/local/$_ANDROID_NDK" ]; then
_ANDROID_NDK_ROOT="/usr/local/$_ANDROID_NDK"
fi
if [ -z "$_ANDROID_NDK_ROOT" ] && [ -d "/opt/$_ANDROID_NDK" ]; then
_ANDROID_NDK_ROOT="/opt/$_ANDROID_NDK"
fi
if [ -z "$_ANDROID_NDK_ROOT" ] && [ -d "$HOME/$_ANDROID_NDK" ]; then
_ANDROID_NDK_ROOT="$HOME/$_ANDROID_NDK"
fi
if [ -z "$_ANDROID_NDK_ROOT" ] && [ -d "$PWD/$_ANDROID_NDK" ]; then
_ANDROID_NDK_ROOT="$PWD/$_ANDROID_NDK"
fi
# If a path was set, then export it
if [ ! -z "$_ANDROID_NDK_ROOT" ] && [ -d "$_ANDROID_NDK_ROOT" ]; then
export ANDROID_NDK_ROOT="$_ANDROID_NDK_ROOT"
fi
fi
# Error checking
# ANDROID_NDK_ROOT should always be set by the user (even when not running this script)
# http://groups.google.com/group/android-ndk/browse_thread/thread/a998e139aca71d77
if [ -z "$ANDROID_NDK_ROOT" ] || [ ! -d "$ANDROID_NDK_ROOT" ]; then
echo "Error: ANDROID_NDK_ROOT is not a valid path. Please edit this script."
# echo "$ANDROID_NDK_ROOT"
# exit 1
fi
# Error checking
if [ ! -d "$ANDROID_NDK_ROOT/toolchains" ]; then
echo "Error: ANDROID_NDK_ROOT/toolchains is not a valid path. Please edit this script."
# echo "$ANDROID_NDK_ROOT/toolchains"
# exit 1
fi
# Error checking
if [ ! -d "$ANDROID_NDK_ROOT/toolchains/$_ANDROID_EABI" ]; then
echo "Error: ANDROID_EABI is not a valid path. Please edit this script."
# echo "$ANDROID_NDK_ROOT/toolchains/$_ANDROID_EABI"
# exit 1
fi
#####################################################################
# Based on ANDROID_NDK_ROOT, try and pick up the required toolchain. We expect something like:
# /opt/android-ndk-r83/toolchains/arm-linux-androideabi-4.7/prebuilt/linux-x86_64/bin
# Once we locate the toolchain, we add it to the PATH. Note: this is the 'hard way' of
# doing things according to the NDK documentation for Ice Cream Sandwich.
# https://android.googlesource.com/platform/ndk/+/ics-mr0/docs/STANDALONE-TOOLCHAIN.html
ANDROID_TOOLCHAIN=""
for host in "linux-x86_64" "linux-x86" "darwin-x86_64" "darwin-x86"
do
if [ -d "$ANDROID_NDK_ROOT/toolchains/$_ANDROID_EABI/prebuilt/$host/bin" ]; then
ANDROID_TOOLCHAIN="$ANDROID_NDK_ROOT/toolchains/$_ANDROID_EABI/prebuilt/$host/bin"
break
fi
done
# Error checking
if [ -z "$ANDROID_TOOLCHAIN" ] || [ ! -d "$ANDROID_TOOLCHAIN" ]; then
echo "Error: ANDROID_TOOLCHAIN is not valid. Please edit this script."
# echo "$ANDROID_TOOLCHAIN"
# exit 1
fi
case $_ANDROID_ARCH in
arch-arm64)
ANDROID_TOOLS="aarch64-linux-android-gcc aarch64-linux-android-ranlib aarch64-linux-android-ld"
;;
arch-x86)
ANDROID_TOOLS="i686-linux-android-gcc i686-linux-android-ranlib i686-linux-android-ld"
;;
*)
echo "ERROR ERROR ERROR"
;;
esac
for tool in $ANDROID_TOOLS
do
# Error checking
if [ ! -e "$ANDROID_TOOLCHAIN/$tool" ]; then
echo "Error: Failed to find $tool. Please edit this script."
# echo "$ANDROID_TOOLCHAIN/$tool"
# exit 1
fi
done
# Only modify/export PATH if ANDROID_TOOLCHAIN good
if [ ! -z "$ANDROID_TOOLCHAIN" ]; then
export ANDROID_TOOLCHAIN="$ANDROID_TOOLCHAIN"
export PATH="$ANDROID_TOOLCHAIN":"$PATH"
fi
#####################################################################
# For the Android SYSROOT. Can be used on the command line with --sysroot
# https://android.googlesource.com/platform/ndk/+/ics-mr0/docs/STANDALONE-TOOLCHAIN.html
export ANDROID_SYSROOT="$ANDROID_NDK_ROOT/platforms/$_ANDROID_API/$_ANDROID_ARCH"
export CROSS_SYSROOT="$ANDROID_SYSROOT"
export NDK_SYSROOT="$ANDROID_SYSROOT"
# Error checking
if [ -z "$ANDROID_SYSROOT" ] || [ ! -d "$ANDROID_SYSROOT" ]; then
echo "Error: ANDROID_SYSROOT is not valid. Please edit this script."
# echo "$ANDROID_SYSROOT"
# exit 1
fi
#####################################################################
# If the user did not specify the FIPS_SIG location, try and pick it up
# If the user specified a bad location, then try and pick it up too.
if [ -z "$FIPS_SIG" ] || [ ! -e "$FIPS_SIG" ]; then
# Try and locate it
_FIPS_SIG=""
if [ -d "/usr/local/ssl/$_ANDROID_API" ]; then
_FIPS_SIG=`find "/usr/local/ssl/$_ANDROID_API" -name incore`
fi
if [ ! -e "$_FIPS_SIG" ]; then
_FIPS_SIG=`find $PWD -name incore`
fi
# If a path was set, then export it
if [ ! -z "$_FIPS_SIG" ] && [ -e "$_FIPS_SIG" ]; then
export FIPS_SIG="$_FIPS_SIG"
fi
fi
# Error checking. Its OK to ignore this if you are *not* building for FIPS
if [ -z "$FIPS_SIG" ] || [ ! -e "$FIPS_SIG" ]; then
echo "Error: FIPS_SIG does not specify incore module. Please edit this script."
# echo "$FIPS_SIG"
# exit 1
fi
#####################################################################
# Most of these should be OK (MACHINE, SYSTEM, ARCH). RELEASE is ignored.
export MACHINE=arm64-v8a
export RELEASE=2.6.37
export SYSTEM=android
export ARCH=arm64
export CROSS_COMPILE="aarch64-linux-android-"
#export AR=aarch64-linux-android-ar
export AS=aarch64-linux-android-as
#export CC=aarch64-linux-android-gcc
export CXX=aarch64-linux-android-g++
export LD=aarch64-linux-android-ld
export NM=aarch64-linux-android-nm
export RANLIB=aarch64-linux-android-ranlib
export STRIP=aarch64-linux-android-strip
if [ "$_ANDROID_ARCH" == "arch-x86" ]; then
export MACHINE=i686
export RELEASE=2.6.37
export SYSTEM=android
export ARCH=x86
export CROSS_COMPILE="i686-linux-android-"
fi
# For the Android toolchain
# https://android.googlesource.com/platform/ndk/+/ics-mr0/docs/STANDALONE-TOOLCHAIN.html
export ANDROID_SYSROOT="$ANDROID_NDK_ROOT/platforms/$_ANDROID_API/$_ANDROID_ARCH"
export SYSROOT="$ANDROID_SYSROOT"
export NDK_SYSROOT="$ANDROID_SYSROOT"
export ANDROID_NDK_SYSROOT="$ANDROID_SYSROOT"
export ANDROID_API="$_ANDROID_API"
# CROSS_COMPILE and ANDROID_DEV are DFW (Don't Fiddle With). Its used by OpenSSL build system.
# export CROSS_COMPILE="arm-linux-androideabi-"
export ANDROID_DEV="$ANDROID_NDK_ROOT/platforms/$_ANDROID_API/$_ANDROID_ARCH/usr"
export HOSTCC=gcc
VERBOSE=1
if [ ! -z "$VERBOSE" ] && [ "$VERBOSE" != "0" ]; then
echo "ANDROID_NDK_ROOT: $ANDROID_NDK_ROOT"
echo "ANDROID_ARCH: $_ANDROID_ARCH"
echo "ANDROID_EABI: $_ANDROID_EABI"
echo "ANDROID_API: $ANDROID_API"
echo "ANDROID_SYSROOT: $ANDROID_SYSROOT"
echo "ANDROID_TOOLCHAIN: $ANDROID_TOOLCHAIN"
echo "FIPS_SIG: $FIPS_SIG"
echo "CROSS_COMPILE: $CROSS_COMPILE"
echo "ANDROID_DEV: $ANDROID_DEV"
echo "ARCH: $ARCH"
echo "AR: $AR"
echo "AS: $AS"
echo "CC: $CC"
echo "CXX: CXX"
echo "LD: $LD"
echo "NM: $NM"
echo "RANLIB: $RANLIB"
echo "STRIP: $STRIP"
fi
./Configure no-shared no-ssl2 no-ssl3 no-comp no-hw no-engine android64-aarch64 \
--openssldir=/home/aa/Download/openssl-1.1.0f/ssl/$ANDROID_API\
--prefix=/home/aa/Downloads/openssl-1.1.0f/openssl-64
make clean
make -j8
make install