在以太坊私有网络中建立节点集群,并发生交易
为了在本地网络运行多个以太坊节点的实例,必须确保一下几点:
1. 每个实例都有独立的数据目录(–datadir)
2. 每个实例运行都有独立的端口.(eth和rpc两者都是)(–port 和 –rpcprot)
3. 在集群的情况下, 实例之间都必须要知道彼此.
4. 唯一的ipc通信端点,或者禁用ipc.
启动第一个节点(指定端口,并禁用ipc),运行命令和结果如下:
root@i-ct5y7t0o:/home/ubuntu/private-geth# geth --datadir ./data0 --networkid 31459 --ipcdisable --port 619 --rpcport 8200 console
INFO [06-28|14:52:52] Starting peer-to-peer node instance=Geth/v1.6.6-stable-10a45cb5/linux-amd64/go1.8.1
INFO [06-28|14:52:52] Allocated cache and file handles database=/home/ubuntu/private-geth/data0/geth/chaindata cache=128 handles=1024
INFO [06-28|14:52:52] Initialised chain configuration config="{ChainID: 666 Homestead: 0 DAO: DAOSupport: false EIP150: EIP155: 0 EIP158: 0 Metropolis: Engine: unknown}"
INFO [06-28|14:52:52] Disk storage enabled for ethash caches dir=/home/ubuntu/private-geth/data0/geth/ethash count=3
INFO [06-28|14:52:52] Disk storage enabled for ethash DAGs dir=/root/.ethash count=2
INFO [06-28|14:52:52] Initialising Ethereum protocol versions="[63 62]" network=31459
INFO [06-28|14:52:52] Loaded most recent local header number=546 hash=a511c3鈥40ac8 td=79201418
INFO [06-28|14:52:52] Loaded most recent local full block number=546 hash=a511c3鈥40ac8 td=79201418
INFO [06-28|14:52:52] Loaded most recent local fast block number=546 hash=a511c3鈥40ac8 td=79201418
WARN [06-28|14:52:52] Blockchain not empty, fast sync disabled
INFO [06-28|14:52:52] Starting P2P networking
INFO [06-28|14:52:54] UDP listener up self=enode://fc96d5fb078c82f33092c4944b31b3a8b9201ddec88b880ae245a131e1107b33f3d7833f5f6992d7c9ffdb557fbdd9ad2ab5b2ead2492f0bdb5690a0392c50f7@[::]:619
INFO [06-28|14:52:54] RLPx listener up self=enode://fc96d5fb078c82f33092c4944b31b3a8b9201ddec88b880ae245a131e1107b33f3d7833f5f6992d7c9ffdb557fbdd9ad2ab5b2ead2492f0bdb5690a0392c50f7@[::]:619
Welcome to the Geth JavaScript console!
instance: Geth/v1.6.6-stable-10a45cb5/linux-amd64/go1.8.1
coinbase: 0x66c62f1afa08eae5343bd2b3129e0ae9aa141fc3
at block: 546 (Wed, 28 Jun 2017 14:08:50 CST)
datadir: /home/ubuntu/private-geth/data0
modules: admin:1.0 debug:1.0 eth:1.0 miner:1.0 net:1.0 personal:1.0 rpc:1.0 txpool:1.0 web3:1.0上面的命令以命令行的(console)的方式启动了节点, 所以我们可以通过继续输入下面的命令获取节点实例的enode url:
> admin.nodeInfo.enode
"enode://fc96d5fb078c82f33092c4944b31b3a8b9201ddec88b880ae245a131e1107b33f3d7833f5f6992d7c9ffdb557fbdd9ad2ab5b2ead2492f0bdb5690a0392c50f7@[::]:619"获取本机IP地址
ubuntu@i-ct5y7t0o:~$ ip addr
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:0f:63:73:66 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.3/24 brd 192.168.0.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:fff:fe63:7366/64 scope link
valid_lft forever preferred_lft forever 再打开一个终端,初始化第二个节点:
root@i-ct5y7t0o:/home/ubuntu/private-geth# geth --datadir ./data1 init ./genesis.json
WARN [06-28|14:55:45] No etherbase set and no accounts found as default
INFO [06-28|14:55:45] Allocated cache and file handles database=/home/ubuntu/private-geth/data1/geth/chaindata cache=16 handles=16
INFO [06-28|14:55:45] Writing custom genesis block
INFO [06-28|14:55:45] Successfully wrote genesis state database=chaindata hash=e492a5鈥0420d
INFO [06-28|14:55:45] Allocated cache and file handles database=/home/ubuntu/private-geth/data1/geth/lightchaindata cache=16 handles=16
INFO [06-28|14:55:45] Writing custom genesis block
INFO [06-28|14:55:45] Successfully wrote genesis state database=lightchaindata hash=e492a5鈥0420d启动节点, 加上console 表示启动后,启用命令行:
root@i-ct5y7t0o:/home/ubuntu/private-geth# geth --datadir ./data1 --networkid 31459 --ipcdisable --port 6191 --rpcport 8101 --bootnodes "enode://fc96d5fb078c82f33092c4944b31b3a8b9201ddec88b880ae245a131e1107b33f3d7833f5f6992d7c9ffdb557fbdd9ad2ab5b2ead2492f0bdb5690a0392c50f7@192.168.0.3:619" console
WARN [06-28|15:01:27] No etherbase set and no accounts found as default
INFO [06-28|15:01:27] Starting peer-to-peer node instance=Geth/v1.6.6-stable-10a45cb5/linux-amd64/go1.8.1
INFO [06-28|15:01:27] Allocated cache and file handles database=/home/ubuntu/private-geth/data1/geth/chaindata cache=128 handles=1024
WARN [06-28|15:01:27] Upgrading chain database to use sequential keys
INFO [06-28|15:01:27] Initialised chain configuration config="{ChainID: 666 Homestead: 0 DAO: DAOSupport: false EIP150: EIP155: 0 EIP158: 0 Metropolis: Engine: unknown}"
INFO [06-28|15:01:27] Disk storage enabled for ethash caches dir=/home/ubuntu/private-geth/data1/geth/ethash count=3
INFO [06-28|15:01:27] Disk storage enabled for ethash DAGs dir=/root/.ethash count=2
WARN [06-28|15:01:27] Upgrading db log bloom bins
INFO [06-28|15:01:27] Bloom-bin upgrade completed elapsed=198.75碌s
INFO [06-28|15:01:27] Initialising Ethereum protocol versions="[63 62]" network=31459
INFO [06-28|15:01:27] Database conversion successful
INFO [06-28|15:01:27] Loaded most recent local header number=0 hash=e492a5鈥0420d td=1024
INFO [06-28|15:01:27] Loaded most recent local full block number=0 hash=e492a5鈥0420d td=1024
INFO [06-28|15:01:27] Loaded most recent local fast block number=0 hash=e492a5鈥0420d td=1024
INFO [06-28|15:01:27] Starting P2P networking
INFO [06-28|15:01:29] UDP listener up self=enode://769c6de9b913f40edac8a037bbc697242097c4fa8f1574240bd2aeb930c049fd0d85310b9ba04bf6027c9d1a36a13789210140c9f2e38525deff87e28c8f5a09@[::]:6191
INFO [06-28|15:01:29] RLPx listener up self=enode://769c6de9b913f40edac8a037bbc697242097c4fa8f1574240bd2aeb930c049fd0d85310b9ba04bf6027c9d1a36a13789210140c9f2e38525deff87e28c8f5a09@[::]:6191
Welcome to the Geth JavaScript console!
instance: Geth/v1.6.6-stable-10a45cb5/linux-amd64/go1.8.1
modules: admin:1.0 debug:1.0 eth:1.0 miner:1.0 net:1.0 personal:1.0 rpc:1.0 txpool:1.0 web3:1.0
然后他会自动同步区块链的数据上面的命令中,–bootndoes 是设置当前节点启动后,直接通过设置–bootndoes 的值来链接第一个节点, –bootnoedes 的值可以通过在第一个节的命令行中,输入:admin.nodeInfo.enode命令打印出来.
也可以不设置 –bootnodes, 直接启动,启动后进入命令行, 通过命令admin.addPeer(enodeUrlOfFirst Instance)把它作为一个peer添加进来.
为了确认链接成功,第二个节点输入:
> admin.nodeInfo
{
enode: "enode://769c6de9b913f40edac8a037bbc697242097c4fa8f1574240bd2aeb930c049fd0d85310b9ba04bf6027c9d1a36a13789210140c9f2e38525deff87e28c8f5a09@[::]:6191",
id: "769c6de9b913f40edac8a037bbc697242097c4fa8f1574240bd2aeb930c049fd0d85310b9ba04bf6027c9d1a36a13789210140c9f2e38525deff87e28c8f5a09",
ip: "::",
listenAddr: "[::]:6191",
name: "Geth/v1.6.6-stable-10a45cb5/linux-amd64/go1.8.1",
ports: {
discovery: 6191,
listener: 6191
},
protocols: {
eth: {
difficulty: 79750339,
genesis: "0xe492a51ac029fd78d9c27dd1ff018b233231d15aa795d90aab1bd7d1ebc0420d",
head: "0xdeeb2bc33146dccc9b5a3f02c56735d4fa4cb562fb92b3966053ede8880db8bf",
network: 31459
}
}
}第一个节点输入:
> admin.nodeInfo.enode
"enode://fc96d5fb078c82f33092c4944b31b3a8b9201ddec88b880ae245a131e1107b33f3d7833f5f6992d7c9ffdb557fbdd9ad2ab5b2ead2492f0bdb5690a0392c50f7@[::]:619"
> admin.nodeInfo
{
enode: "enode://fc96d5fb078c82f33092c4944b31b3a8b9201ddec88b880ae245a131e1107b33f3d7833f5f6992d7c9ffdb557fbdd9ad2ab5b2ead2492f0bdb5690a0392c50f7@[::]:619",
id: "fc96d5fb078c82f33092c4944b31b3a8b9201ddec88b880ae245a131e1107b33f3d7833f5f6992d7c9ffdb557fbdd9ad2ab5b2ead2492f0bdb5690a0392c50f7",
ip: "::",
listenAddr: "[::]:619",
name: "Geth/v1.6.6-stable-10a45cb5/linux-amd64/go1.8.1",
ports: {
discovery: 619,
listener: 619
},
protocols: {
eth: {
difficulty: 79750339,
genesis: "0xe492a51ac029fd78d9c27dd1ff018b233231d15aa795d90aab1bd7d1ebc0420d",
head: "0xdeeb2bc33146dccc9b5a3f02c56735d4fa4cb562fb92b3966053ede8880db8bf",
network: 31459
}
}
}
> net.peerCount
1
> admin.peers
[{
caps: ["eth/63"],
id: "769c6de9b913f40edac8a037bbc697242097c4fa8f1574240bd2aeb930c049fd0d85310b9ba04bf6027c9d1a36a13789210140c9f2e38525deff87e28c8f5a09",
name: "Geth/v1.6.6-stable-10a45cb5/linux-amd64/go1.8.1",
network: {
localAddress: "192.168.0.3:619",
remoteAddress: "192.168.0.3:38620"
},
protocols: {
eth: {
difficulty: 1024,
head: "0xe492a51ac029fd78d9c27dd1ff018b233231d15aa795d90aab1bd7d1ebc0420d",
version: 63
}
}
}]从得到的结果可以看出,第一个节点有1个peer链接, 链接的node id为:
“769c6de9b913f40edac8a037bbc697242097c4fa8f1574240bd2aeb930c049fd0d85310b9ba04bf6027c9d1a36a13789210140c9f2e38525deff87e28c8f5a09”
这个id,正好就是第二个节点的id.
按照这样的方式继续扩展,可以非常容易就可以建立本地节点集群.这些工作都可以写成脚本代码来完成, 里面还可以包含创建账户,挖矿等..
请参考:https://github.com/ethersphere/eth-utils下的gethcluster.sh脚本,以及README中的使用方法和示例.
链接成功后,使用我们在上一篇文章中挖矿的账户,向第二个节点发送 “ether”(以太币的货币单位,还有一种叫”Wei”).
首先查看第二个节点的Wei数量和整个网络的区块号,还有接收货币的账号id:
personal.newAccount()
Passphrase:
Repeat passphrase:
"0xd600f5622024bb8f53ca3f0506cf1a13c811e17b"
> INFO [06-28|15:07:38] New wallet appeared url=keystore:///home/ubuntu/private鈥[32mstatus=Locked
>
> eth.getBalance(eth.accounts[0])
0在第一个节点命令行中,执行下面的操作:
personal.unlockAccount(eth.accounts[0])
Unlock account 0x66c62f1afa08eae5343bd2b3129e0ae9aa141fc3
Passphrase:
true
> ^C
> eth.sendTransaction({from: "0x66c62f1afa08eae5343bd2b3129e0ae9aa141fc3", to: "0xd600f5622024bb8f53ca3f0506cf1a13c811e17b", value: web3.toWei(1, "ether")})
> miner.start()再在第二个节点的命令行输入:
eth.getBalance(eth.accounts[0])就可以查看转账成功再打开一个终端,初始化第三个节点:
root@i-ct5y7t0o:/home/ubuntu/private-geth# geth --datadir ./data2 init ./genesis.json
WARN [06-28|14:55:45] No etherbase set and no accounts found as default
INFO [06-28|14:55:45] Allocated cache and file handles database=/home/ubuntu/private-geth/data1/geth/chaindata cache=16 handles=16
INFO [06-28|14:55:45] Writing custom genesis block
INFO [06-28|14:55:45] Successfully wrote genesis state database=chaindata hash=e492a5鈥0420d
INFO [06-28|14:55:45] Allocated cache and file handles database=/home/ubuntu/private-geth/data1/geth/lightchaindata cache=16 handles=16
INFO [06-28|14:55:45] Writing custom genesis block
INFO [06-28|14:55:45] Successfully wrote genesis state database=lightchaindata hash=e492a5鈥0420d启动节点, 加上console 表示启动后,启用命令行:
root@i-ct5y7t0o:/home/ubuntu/private-geth# geth --datadir ./data2 --networkid 31459 --ipcdisable --port 6192 --rpcport 8100 --bootnodes "enode://fc96d5fb078c82f33092c4944b31b3a8b9201ddec88b880ae245a131e1107b33f3d7833f5f6992d7c9ffdb557fbdd9ad2ab5b2ead2492f0bdb5690a0392c50f7@192.168.0.3:619" console
WARN [06-28|15:01:27] No etherbase set and no accounts found as default
INFO [06-28|15:01:27] Starting peer-to-peer node instance=Geth/v1.6.6-stable-10a45cb5/linux-amd64/go1.8.1
INFO [06-28|15:01:27] Allocated cache and file handles database=/home/ubuntu/private-geth/data1/geth/chaindata cache=128 handles=1024
WARN [06-28|15:01:27] Upgrading chain database to use sequential keys
INFO [06-28|15:01:27] Initialised chain configuration config="{ChainID: 666 Homestead: 0 DAO: DAOSupport: false EIP150: EIP155: 0 EIP158: 0 Metropolis: Engine: unknown}"
INFO [06-28|15:01:27] Disk storage enabled for ethash caches dir=/home/ubuntu/private-geth/data1/geth/ethash count=3
INFO [06-28|15:01:27] Disk storage enabled for ethash DAGs dir=/root/.ethash count=2
WARN [06-28|15:01:27] Upgrading db log bloom bins
INFO [06-28|15:01:27] Bloom-bin upgrade completed elapsed=198.75碌s
INFO [06-28|15:01:27] Initialising Ethereum protocol versions="[63 62]" network=31459
INFO [06-28|15:01:27] Database conversion successful
INFO [06-28|15:01:27] Loaded most recent local header number=0 hash=e492a5鈥0420d td=1024
INFO [06-28|15:01:27] Loaded most recent local full block number=0 hash=e492a5鈥0420d td=1024
INFO [06-28|15:01:27] Loaded most recent local fast block number=0 hash=e492a5鈥0420d td=1024
INFO [06-28|15:01:27] Starting P2P networking
INFO [06-28|15:01:29] UDP listener up self=enode://769c6de9b913f40edac8a037bbc697242097c4fa8f1574240bd2aeb930c049fd0d85310b9ba04bf6027c9d1a36a13789210140c9f2e38525deff87e28c8f5a09@[::]:6191
INFO [06-28|15:01:29] RLPx listener up self=enode://769c6de9b913f40edac8a037bbc697242097c4fa8f1574240bd2aeb930c049fd0d85310b9ba04bf6027c9d1a36a13789210140c9f2e38525deff87e28c8f5a09@[::]:6191
Welcome to the Geth JavaScript console!
instance: Geth/v1.6.6-stable-10a45cb5/linux-amd64/go1.8.1
modules: admin:1.0 debug:1.0 eth:1.0 miner:1.0 net:1.0 personal:1.0 rpc:1.0 txpool:1.0 web3:1.0
然后他会自动同步区块链的数据这样这条链就有三个节点了