fabric-samples环境搭建-bootstrap.sh下载二进制文件失败

在执行 ./bootstrap.sh 脚本自动下载fabric-samples和fabric镜像时，由于国内网络的原因，常常会下载 hyperledger-fabric-linux-amd64-1.4.0.tar.gz 失败的错误导致无法继续进行：

==> There was an error downloading the binary file. Switching to incremental download.
==> Downloading file...
Failure downloading binaries (curl RC=6). Please try again and the download will resume from where it stopped.

在这里你只需要根据脚本在超时后的提示地址下载镜像文件并解压使用。如果这个链接在浏览器中也无法打开，那只能从其他网站下载 hyperledger-fabric-linux-amd64-1.4.0.tar.gz （版本根据自己需要来选择）文件拷贝进来解压使用。

$ cd fabric-samples
$ wget https://nexus.hyperledger.org/content/repositories/releases/org/hyperledger/fabric/hyperledger-fabric/linux-amd64-1.4.0/hyperledger-fabric-linux-amd64-1.4.0.tar.gz
$ tar -xzf hyperledger-fabric-linux-amd64-1.4.0.tar.gz

*打开bootstrap.sh文件，将 binariesInstall 屏蔽后再执行 ./bootstrap.sh不会报错.

#!/bin/bash
#
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

# if version not passed in, default to latest released version
export VERSION=1.4.0
# if ca version not passed in, default to latest released version
export CA_VERSION=$VERSION
# current version of thirdparty images (couchdb, kafka and zookeeper) released
export THIRDPARTY_IMAGE_VERSION=0.4.14
export ARCH=$(echo "$(uname -s|tr '[:upper:]' '[:lower:]'|sed 's/mingw64_nt.*/windows/')-$(uname -m | sed 's/x86_64/amd64/g')")
export MARCH=$(uname -m)

printHelp() {
  echo "Usage: bootstrap.sh [version [ca_version [thirdparty_version]]] [options]"
  echo
  echo "options:"
  echo "-h : this help"
  echo "-d : bypass docker image download"
  echo "-s : bypass fabric-samples repo clone"
  echo "-b : bypass download of platform-specific binaries"
  echo
  echo "e.g. bootstrap.sh 1.4.0 -s"
  echo "would download docker images and binaries for version 1.4.0"
}

dockerFabricPull() {
  local FABRIC_TAG=$1
  for IMAGES in peer orderer ccenv javaenv tools; do
      echo "==> FABRIC IMAGE: $IMAGES"
      echo
      docker pull hyperledger/fabric-$IMAGES:$FABRIC_TAG
      docker tag hyperledger/fabric-$IMAGES:$FABRIC_TAG hyperledger/fabric-$IMAGES
  done
}

dockerThirdPartyImagesPull() {
  local THIRDPARTY_TAG=$1
  for IMAGES in couchdb kafka zookeeper; do
      echo "==> THIRDPARTY DOCKER IMAGE: $IMAGES"
      echo
      docker pull hyperledger/fabric-$IMAGES:$THIRDPARTY_TAG
      docker tag hyperledger/fabric-$IMAGES:$THIRDPARTY_TAG hyperledger/fabric-$IMAGES
  done
}

dockerCaPull() {
      local CA_TAG=$1
      echo "==> FABRIC CA IMAGE"
      echo
      docker pull hyperledger/fabric-ca:$CA_TAG
      docker tag hyperledger/fabric-ca:$CA_TAG hyperledger/fabric-ca
}

samplesInstall() {
  # clone (if needed) hyperledger/fabric-samples and checkout corresponding
  # version to the binaries and docker images to be downloaded
  if [ -d first-network ]; then
    # if we are in the fabric-samples repo, checkout corresponding version
    echo "===> Checking out v${VERSION} of hyperledger/fabric-samples"
    git checkout v${VERSION}
  elif [ -d fabric-samples ]; then
    # if fabric-samples repo already cloned and in current directory,
    # cd fabric-samples and checkout corresponding version
    echo "===> Checking out v${VERSION} of hyperledger/fabric-samples"
    cd fabric-samples && git checkout v${VERSION}
  else
    echo "===> Cloning hyperledger/fabric-samples repo and checkout v${VERSION}"
    git clone -b master https://gitee.com/itwolf5/fabric-samples.git && cd fabric-samples && git checkout v${VERSION}
  fi
}

# Incrementally downloads the .tar.gz file locally first, only decompressing it
# after the download is complete. This is slower than binaryDownload() but
# allows the download to be resumed.
binaryIncrementalDownload() {
      local BINARY_FILE=$1
      local URL=$2
      curl -f -s -C - ${URL} -o ${BINARY_FILE} || rc=$?
      # Due to limitations in the current Nexus repo:
      # curl returns 33 when there's a resume attempt with no more bytes to download
      # curl returns 2 after finishing a resumed download
      # with -f curl returns 22 on a 404
      if [ "$rc" = 22 ]; then
	  # looks like the requested file doesn't actually exist so stop here
	  return 22
      fi
      if [ -z "$rc" ] || [ $rc -eq 33 ] || [ $rc -eq 2 ]; then
          # The checksum validates that RC 33 or 2 are not real failures
          echo "==> File downloaded. Verifying the md5sum..."
          localMd5sum=$(md5sum ${BINARY_FILE} | awk '{print $1}')
          remoteMd5sum=$(curl -s ${URL}.md5)
          if [ "$localMd5sum" == "$remoteMd5sum" ]; then
              echo "==> Extracting ${BINARY_FILE}..."
              tar xzf ./${BINARY_FILE} --overwrite
	      echo "==> Done."
              rm -f ${BINARY_FILE} ${BINARY_FILE}.md5
          else
              echo "Download failed: the local md5sum is different from the remote md5sum. Please try again."
              rm -f ${BINARY_FILE} ${BINARY_FILE}.md5
              exit 1
          fi
      else
          echo "Failure downloading binaries (curl RC=$rc). Please try again and the download will resume from where it stopped."
          exit 1
      fi
}

# This will attempt to download the .tar.gz all at once, but will trigger the
# binaryIncrementalDownload() function upon a failure, allowing for resume
# if there are network failures.
binaryDownload() {
      local BINARY_FILE=$1
      local URL=$2
      echo "===> Downloading: " ${URL}
      # Check if a previous failure occurred and the file was partially downloaded
      if [ -e ${BINARY_FILE} ]; then
          echo "==> Partial binary file found. Resuming download..."
          binaryIncrementalDownload ${BINARY_FILE} ${URL}
      else
          curl ${URL} | tar xz || rc=$?
          if [ ! -z "$rc" ]; then
              echo "==> There was an error downloading the binary file. Switching to incremental download."
              echo "==> Downloading file..."
              binaryIncrementalDownload ${BINARY_FILE} ${URL}
	  else
	      echo "==> Done."
          fi
      fi
}

binariesInstall() {
  echo "===> Downloading version ${FABRIC_TAG} platform specific fabric binaries"
  binaryDownload ${BINARY_FILE} https://nexus.hyperledger.org/content/repositories/releases/org/hyperledger/fabric/hyperledger-fabric/${ARCH}-${VERSION}/${BINARY_FILE}
  if [ $? -eq 22 ]; then
     echo
     echo "------> ${FABRIC_TAG} platform specific fabric binary is not available to download <----"
     echo
   fi

  echo "===> Downloading version ${CA_TAG} platform specific fabric-ca-client binary"
  binaryDownload ${CA_BINARY_FILE} https://nexus.hyperledger.org/content/repositories/releases/org/hyperledger/fabric-ca/hyperledger-fabric-ca/${ARCH}-${CA_VERSION}/${CA_BINARY_FILE}
  if [ $? -eq 22 ]; then
     echo
     echo "------> ${CA_TAG} fabric-ca-client binary is not available to download  (Available from 1.1.0-rc1) <----"
     echo
   fi
}

dockerInstall() {
  which docker >& /dev/null
  NODOCKER=$?
  if [ "${NODOCKER}" == 0 ]; then
	  echo "===> Pulling fabric Images"
	  dockerFabricPull ${FABRIC_TAG}
	  echo "===> Pulling fabric ca Image"
	  dockerCaPull ${CA_TAG}
	  echo "===> Pulling thirdparty docker images"
	  dockerThirdPartyImagesPull ${THIRDPARTY_TAG}
	  echo
	  echo "===> List out hyperledger docker images"
	  docker images | grep hyperledger*
  else
    echo "========================================================="
    echo "Docker not installed, bypassing download of Fabric images"
    echo "========================================================="
  fi
}

DOCKER=true
SAMPLES=true
BINARIES=true

# Parse commandline args pull out
# version and/or ca-version strings first
if [ ! -z "$1" -a ${1:0:1} != "-" ]; then
  VERSION=$1;shift
  if [ ! -z "$1"  -a ${1:0:1} != "-" ]; then
    CA_VERSION=$1;shift
    if [ ! -z "$1"  -a ${1:0:1} != "-" ]; then
      THIRDPARTY_IMAGE_VERSION=$1;shift
    fi
  fi
fi

# prior to 1.2.0 architecture was determined by uname -m
if [[ $VERSION =~ ^1\.[0-1]\.* ]]; then
  export FABRIC_TAG=${MARCH}-${VERSION}
  export CA_TAG=${MARCH}-${CA_VERSION}
  export THIRDPARTY_TAG=${MARCH}-${THIRDPARTY_IMAGE_VERSION}
else
  # starting with 1.2.0, multi-arch images will be default
  : ${CA_TAG:="$CA_VERSION"}
  : ${FABRIC_TAG:="$VERSION"}
  : ${THIRDPARTY_TAG:="$THIRDPARTY_IMAGE_VERSION"}
fi

BINARY_FILE=hyperledger-fabric-${ARCH}-${VERSION}.tar.gz
CA_BINARY_FILE=hyperledger-fabric-ca-${ARCH}-${CA_VERSION}.tar.gz

# then parse opts
while getopts "h?dsb" opt; do
  case "$opt" in
    h|\?)
      printHelp
      exit 0
    ;;
    d)  DOCKER=false
    ;;
    s)  SAMPLES=false
    ;;
    b)  BINARIES=false
    ;;
  esac
done

if [ "$SAMPLES" == "true" ]; then
  echo
  echo "Installing hyperledger/fabric-samples repo"
  echo
  samplesInstall
fi
if [ "$BINARIES" == "true" ]; then
  echo
  echo "Installing Hyperledger Fabric binaries"
  echo
  #binariesInstall
fi
if [ "$DOCKER" == "true" ]; then
  echo
  echo "Installing Hyperledger Fabric docker images"
  echo
  dockerInstall
fi