注意：升级过程中请勿断电断网
 
开始前，将 AP通电，连接至AC（即WX6103）的交换板上g0/0/10口上。
 
步骤一，获取 FAT_AP的SN序号：
dis dev man
DEVICE_NAME:WA2220X-AGP
DEVICE_SERIAL_NUMBER: 210235A 29JB097000001
MAC_ADDRESS:0023-8949-3D20
MANUFACTURING_DATE:2009-07-12
VENDOR_NAME:H3C
 
步骤二，将 AP信息写入AC（即WX6103）中，所相应配置（注意，有Master和Backup两块主控板，一主一备，配置稍有区别）：
[AKDX_WX6103_Master]wlan ap test_2 model WA2220X-AGP
[AKDX_WX6103_Master-wlan-ap-test_2] priority level 6
[AKDX_WX6103_Master-wlan-ap-test_2] serial-id 210235A 29JB097000001
[AKDX_WX6103_Master-wlan-ap-test_2] radio 1
[AKDX_WX6103_Master-wlan-ap-test_2-radio-1] channel auto
[AKDX_WX6103_Master-wlan-ap-test_2-radio-1] max-power 19
[AKDX_WX6103_Master-wlan-ap-test_2-radio-1] radio 2
[AKDX_WX6103_Master-wlan-ap-test_2-radio-2] channel auto
[AKDX_WX6103_Master-wlan-ap-test_2-radio-2] max-power 27
[AKDX_WX6103_Master-wlan-ap-test_2-radio-2] service-template 1 vlan-id 3831
[AKDX_WX6103_Master-wlan-ap-test_2-radio-2] radio enable
[AKDX_WX6103_Master-wlan-ap-test_2-radio-2]qui
[AKDX_WX6103_Master-wlan-ap-test_2]quit
[AKDX_WX6103_Master] sav
The current configuration will be written to the device. Are you sure? [Y/N]: y
Please input the file name(*.cfg)[cfa0:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
cfa0:/startup.cfg exists, overwrite? [Y/N]: y
 Validating file. Please wait....
 Configuration is saved to device successfully.
 
 
参考模版：（双击图标打开）
______________________________________________
----------------------------------------------
WA2200X-AGP：
 
主控板_Master板上：
#
wlan ap test_2 model WA2220X-AGP
 priority level 6
 serial-id 210235A 29JB097000001
 radio 1
 channel auto
 max-power 19
 radio 2
 channel auto
 max-power 27
 service-template 1 vlan-id 3831
  radio enable
#
 
-------------------------------
相应，主控板_Backup板上：
#
wlan ap test_2 model WA2220X-AGP
 serial-id 210235A29JB097000001
 radio 1
 channel auto
 max-power 19
 radio 2
 channel auto
 max-power 27
 service-template 1 vlan-id 3831
 radio enable
#
 
_________________________________________________
-------------------------------------------------
WA2210-AG:
 
主控板_Master板上：
#
wlan ap test_0 model WA2210-AG
 priority level 6
 serial-id 210235A29DB092002160
 radio 1
 channel auto
 max-power 20
 service-template 1 vlan-id 3829
 radio enable
#
 
-------------------------------
相应，主控板_Backup板上：
#
wlan ap test_0 model WA2210-AG
 serial-id 210235A29DB092002160
 radio 1
 channel auto
 max-power 20
 service-template 1 vlan-id 3829
 radio enable
#
 
 
步骤三，命令行下，将 FAP_AP模式切换为FIT，开始自动升级过程。
ap-mode fit
 Change working mode will reboot system, do you want to continue? [Y/N]: y
 Change working mode to FIT now? [Y/N]: y
system start booting......Version 1.31
 
      *******************************************************
      *                                                     *
      *          H3C WA2200 BootWare , Ver 1.31             *
      *                                                     *
      *******************************************************
 Copyright(c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. and its licensors.
 Compiled date: Mar 4 2009, 19:30:07
 CPU type         : PPC405EP
 CPU L1 Cache     : 16KB
 CPU Clock Speed : 266MHz
 Memory Type      : SDRAM
 Memory Size      : 64MB
 Memory Speed     : 133MHz
 BootWare Size    : 512KB
 Flash Size      : 8MB
 
 HardWare Version is Ver.D
 
 
 Application program does not exist.
 
Press Ctrl+B to enter extended boot menu...
 Attaching network interface lo0...
 done.
 
 Trying to get the IP address from the DHCP server......
 DNS domain name got from DHCP server is: .
 DNS server's IP address is: 0.0.0.0.
 Default Gateway's IP address is: 10.80.172.1.
 DHCP server's IP address is: 10.80.172.254.
 This client's assigned address is: 10.80.172.156.
 This client's subnet mask is: 255.255.255.0.
 The length of option 43 is: 0.
 
 Change State : Idle to Broadcast Discovery
 Change State : Broadcast Discovery to Join
 Change State : Join to JoinAck
 Change State : JoinCfm to Image Download
Update
APP...........................................................................................
.................................
 Write size is less,
fails.........................................................................................
..............................................................................................
..............................................................................................
..............................................................................................
.............................................................................................
Update Success!
 [State : ImageLoad] Image download successful
 [State : Idle] Reset request, rebooting the AP
 Please make sure: the baud rate on the PC side is set to 9600 bps after reboot
 Rebooting......
 
system start booting......Version 1.31
 
      *******************************************************
      *                                                     *
      *          H3C WA2200 BootWare , Ver 1.31             *
      *                                                     *
      *******************************************************
 Copyright(c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. and its licensors.
 Compiled date: Mar 4 2009, 19:30:07
 CPU type         : PPC405EP
 CPU L1 Cache     : 16KB
 CPU Clock Speed : 266MHz
 Memory Type      : SDRAM
 Memory Size      : 64MB
 Memory Speed     : 133MHz
 BootWare Size    : 512KB
 Flash Size      : 8MB
 
 HardWare Version is Ver.D
 
 
Press Ctrl+B to enter extended boot menu...
Updating Extend BootWare................................................
Updating the Norm Basic BootWare................................
Update Bootware from packet ok, now reboot system.
 Please make sure: the baud rate on the PC side is set to 9600 bps after reboot
 Rebooting......
........
system start booting......Version 1.32
 
      *******************************************************
      *                                                     *
      *          H3C WA2200 BootWare , Ver 1.32             *
      *                                                     *
      *******************************************************
 Copyright(c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. and its licensors.
 Compiled date: Jun 16 2009, 19:11:36
 CPU type         : PPC405EP
 CPU L1 Cache     : 16KB
 CPU Clock Speed : 266MHz
 Memory Type      : SDRAM
 Memory Size      : 64MB
 Memory Speed     : 133MHz
 BootWare Size    : 512KB
 Flash Size      : 8MB
 
 HardWare Version is Ver.D
 
 
Press Ctrl+B to enter extended boot menu...
The main application file is self-decompressing...
Decompressing...done!........
Startup configuration file does not exist.
User interface con0 is available.
 
 
 
 
******************************************************************************
* Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved. *
* Without the owner's prior written consent,                                  *
* no decompiling or reverse-engineering shall be allowed.                     *
******************************************************************************
 
User interface con0 is available.
 
 
 
Please press ENTER.
 
 
步骤四：在 AC上查看AP能否注册成功。
 
以下是 AP 自动升级并重启后 AC 上显示信息：
[AKDX_WX6103_Master]
#Jul 23 12:08:22:894 2009 AKDX_WX6103_Master LWPS/4/Tunnel Up: Tunnel Up:1.3.6.1.4.1.25506.2.75.1.3.0.1 Serial Id:210235A29JB097000001 UpInfo:1
%Jul 23 12:08:23:027 2009 AKDX_WX6103_Master IFNET/4/LINK UPDOWN:
 WLAN-DBSS1:9: link status is UP
%Jul 23 12:08:23:033 2009 AKDX_WX6103_Master IFNET/4/LINK UPDOWN:
 WLAN-ESS1: link status is UP
#Jul 23 12:08:23:053 2009 AKDX_WX6103_Master IFNET/4/INTERFACE UPDOWN:
 Trap 1.3.6.1.6.3.1.1.5.4: Interface 12517376 is Up, ifAdminStatus is 1, ifOperStatus is 1 
#Jul 23 12:08:23:063 2009 AKDX_WX6103_Master IFNET/4/INTERFACE UPDOWN:
 Trap 1.3.6.1.6.3.1.1.5.4: Interface 12451840 is Up, ifAdminStatus is 1, ifOperStatus is 1 
[AKDX_WX6103_Master]
#Jul 23 12:08:56:663 2009 AKDX_WX6103_Master WMAC/4/Channel Change:Channel:1.3.6.1.4.1.25506.2.75.2.3.0.5 Serial Id:210235A29JB097000001 Serial Id:210235A29JB097000001 Radio Id:2 ChangeMode:2 Old:0 New:1
#Jul 23 12:09:08:333 2009 AKDX_WX6103_Master WMAC/4/Station Authorization Success:Station Auth Success:1.3.6.1.4.1.25506.2.75.3.2.0.6 StaMac1:00:1F:3C:6C:39:8E StaMac2:00:1F:3C:6C:39:8E UserName: StaMac3:00:1F:3C:6C:39:8E VLANId:3831 SessionStartTime:2009-7-23,12:9:8.0 Radioid:2 SSIDName:ChinaNet APID:210235A29JB097000001
#Jul 23 12:09:37:473 2009 AKDX_WX6103_Master WMAC/4/Station Deassociate:Station Deassoc:1.3.6.1.4.1.25506.2.75.3.2.0.5 StaMac1:00:1F:3C:6C:39:8E StaMac2:00:1F:3C:6C:39:8E UserName: StaMac3:00:1F:3C:6C:39:8E VLANId:3831 Radioid:2 SSIDName:ChinaNet SessionDuration:29 APID:210235A29JB097000001
#Jul 23 12:09:37:504 2009 AKDX_WX6103_Master WMAC/4/Station Roam Success:Station Roam Success:1.3.6.1.4.1.25506.2.75.3.2.0.7 StaMac1:00:1F:3C:6C:39:8E StaMac2:00:1F:3C:6C:39:8E Serial Id:210235A29JB097000001 UserName: StaMac3:00:1F:3C:6C:39:8E VLAN Id:3831 RoamingTime:84281 Radioid:2 SSIDName:ChinaNet AC IP Address:0.0.0.0
#Jul 23 12:09:37:533 2009 AKDX_WX6103_Master WMAC/4/Station Authorization Success:Station Auth Success:1.3.6.1.4.1.25506.2.75.3.2.0.6 StaMac1:00:1F:3C:6C:39:8E StaMac2:00:1F:3C:6C:39:8E UserName: StaMac3:00:1F:3C:6C:39:8E VLANId:3831 SessionStartTime:2009-7-23,12:9:37.0 Radioid:2 SSIDName:ChinaNet APID:210235A29JB097000001
#Jul 23 12:09:44:703 2009 AKDX_WX6103_Master WMAC/4/Station Authorization Success:Station Auth Success:1.3.6.1.4.1.25506.2.75.3.2.0.6 StaMac1:00:21:5C:4F:EE:87 StaMac2:00:21:5C:4F:EE:87 UserName: StaMac3:00:21:5C:4F:EE:87 VLANId:3831 SessionStartTime:2009-7-23,12:9:44.0 Radioid:2 SSIDName:ChinaNet APID:210235A29JB097000001
 
 
在 AC 上查看是否注册成功并获取管理地址：
[AKDX_WX6103_Master] _hidecmd
Now you enter a hidden command view for developer's testing, some commands may
affect operation by wrong use, please carefully use it with our engineer's
direction.
[AKDX_WX6103_Master-hidecmd] dis wlan ap name test_2 ver
                         AP Profile: test_2 
-------------------------------------------------------------------------------
 APID                           : 2
 AP System Name                 : Not Configured
 Map Configuration              : Not Configured
 State                          : Run
 Up Time(hh:mm:ss)              : 00:03:29
 
 Model                          : WA2220X-AGP
 Serial-ID                      : 210235A29JB097000001
 IP Address                     : 10.80.172.163
 
 H/W Version                    : Ver.D
 S/W Version                    : V100R001B58D016
 Boot-Rom Version               : 1.32
 Description                    : Not Configured
 
 
 Connection Type                : Master
 Peer AC MAC Address            : -NA-
 Priority Level                 : 6
 Echo Interval(s)               : 10
 Statistics report Interval(s) : 50
               
 Cir(Kbps)                      : -NA-
 Cbs(Bytes)                     : -NA-
 
 Jumboframe Threshold           : Disable
 
 Transmitted control packets    : 63
 Received control packets       : 63
 Transmitted data packets       : 4599
 Received data packets          : 381
 
 Configuration Failure Count    : -NA-
 Last Failure Reason            : -NA-
 
 Last Reboot Reason             : Normal
 
 Latest Join IP Address         : 10.80.172.163
 Tunnel Down Reason             : No Reason
-------------------------------------------------------------------------------
 AP Mode                        : Split
 AP operation mode              : Normal
 Portal Service                : Disable
 Device Detection               : Disable
 Maximum Number of Radios       : 2
 Current Number of Radios       : 2
 Client Keep-alive Interval     : Disable
 Client Idle Interval(s)        : 3600
 Broadcast-probe Reply Status : Enable
 Radio 1:
   Basic BSSID                 : 0023-8949-3d20
   Current BSS Count           : 0
   Running Clients Count       : 0
   Wireless Mode               : 11a
   Configured Channel          : auto
   Configured Power (dBm)      : 19
   Radio Policy                : default_rp
   Mesh Policy                 : default_mp_plcy
   ANI Support                 : Enable
   Admin State                 : DOWN
   Physical State              : UP
   Operational Rates (Mbps):
     6                         : mandatory
     9                         : supported
     12                        : mandatory
     18                        : supported
     24                        : mandatory
     36                        : supported
     48                        : supported
     54                        : supported
   Radar detected Channels     : None
 Radio 2:
   Basic BSSID                 : 0023-8949-3d30
   Current BSS Count           : 1
   Running Clients Count:
     11g                       : 2
     11b                       : 0
   Wireless Mode               : 11g
   Configured Channel          : auto(1)
   Configured Power (dBm)      : 27
   Interference (%)            : 0
   Channel Load (%)            : 0
   Utilization (%)             : 0
   Co-channel Neighbor Count   : 2
   Channel Health              : Good
   Preamble Type               : short
   Radio Policy                : default_rp
   Service Template            : 1   
     SSID                      : ChinaNet
     Port                      : WLAN-DBSS1:9
   Mesh Policy                 : default_mp_plcy
   ANI Support                 : Enable
   11g Protection              : Disable
   Admin State                 : UP
   Physical State              : UP
   Operational Rates (Mbps):
     1                         : mandatory
     2                         : mandatory
     5.5                       : mandatory
     6                         : supported
     9                         : supported
     11                        : mandatory
     12                        : supported
     18                        : supported
     24                        : supported
     36                        : supported
     48                        : supported
     54                        : supported
   Radar detected Channels     : None
-------------------------------------------------------------------------------
[AKDX_WX6103_Master-hidecmd]