Linux 格式化扩展分区(Extended)

如果你在Linux系统中格式化磁盘时遇到如下错误，那么表示你正在格式化一个扩展分区。

[root@GETTestLNX06 ~]# mkfs.ext4 /dev/sdb1

mke2fs 1.41.12 (17-May-2010)

mkfs.ext4: inode_size (128) * inodes_count (0) too big for a

filesystem with 0 blocks, specify higher inode_ratio (-i)

or lower inode count (-N).

直接格式化扩展分区是不允许的，只能格式化主分区和逻辑分区。那么那么应该如何格式化一个扩展分区呢，我们要么删除该扩展分区，创建一个主分区；要么在扩展分区上创建逻辑分区，如下操作所示

1： 创建逻辑分区

[root@GETTestLNX06 ~]# fdisk /dev/sdb

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to

         switch off the mode (command 'c') and change display units to

         sectors (command 'u').

Command (m for help): p

Disk /dev/sdb: 107.4 GB, 107374182400 bytes

255 heads, 63 sectors/track, 13054 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xd61351c9

   Device Boot      Start         End      Blocks   Id  System

/dev/sdb1               1       13054   104856223+   5  Extended

Command (m for help): n

Command action

   l   logical (5 or over)

   p   primary partition (1-4)

l

First cylinder (1-13054, default 1): 1

Last cylinder, +cylinders or +size{K,M,G} (1-13054, default 13054): 

Using default value 13054

Command (m for help): p

Disk /dev/sdb: 107.4 GB, 107374182400 bytes

255 heads, 63 sectors/track, 13054 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xd61351c9

   Device Boot      Start         End      Blocks   Id  System

/dev/sdb1               1       13054   104856223+   5  Extended

/dev/sdb5               1       13054   104856192   83  Linux

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

2：格式化逻辑分区

[root@GETTestLNX06 ~]# mkfs.ext4 /dev/sdb5

mke2fs 1.41.12 (17-May-2010)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

6553600 inodes, 26214048 blocks

1310702 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=4294967296

800 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks: 

        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 

        4096000, 7962624, 11239424, 20480000, 23887872

Writing inode tables: done                            

Creating journal (32768 blocks): done

Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 28 mounts or

180 days, whichever comes first.  Use tune2fs -c or -i to override.

3：将挂载信息写入配置文件

编辑[root@GETTestLNX06 ~]# vi /etc/fstab

4：挂载新建的分区

[root@GETTestLNX06 ~]# cd /

[root@GETTestLNX06 /]# mkdir u01

[root@GETTestLNX06 /]# mount -a

[root@GETTestLNX06 /]# df -h

Filesystem            Size  Used Avail Use% Mounted on

/dev/mapper/vg_gettestlnx06-lv_root

                       44G  2.3G   40G   6% /

tmpfs                 3.9G     0  3.9G   0% /dev/shm

/dev/sda1             477M   33M  419M   8% /boot

/dev/sdb5              99G   60M   94G   1% /u01

[root@GETTestLNX06 /]# 

 

from:http://www.cnblogs.com/kerrycode/p/4423753.html