STM32 Makefile C/C++ 通用

由Nordic SDK的gcc编译文件修改

 

Makefile:

##########################################################################################################################
# File automatically-generated by tool: [projectgenerator] version: [3.7.1] date: [Fri Jul 03 22:12:12 CST 2020]
##########################################################################################################################

# ------------------------------------------------
# Generic Makefile (based on gcc)
#
# ChangeLog :
#	2017-02-10 - Several enhancements + project update mode
#   2015-07-22 - first version
# ------------------------------------------------

######################################
# building variables
######################################
# debug build?
DEBUG = 1

######################################
# target
######################################
TARGET = stmm32wb55_prohect1

PROJECT_NAME     := stmm32wb55_prohect1
TARGETS          := stm32wb55xx
OUTPUT_DIRECTORY := _build


HAL_DRIVER := Drivers/STM32WBxx_HAL_Driver
PROJ_DIR := Src/


$(OUTPUT_DIRECTORY)/stm32wb55xx.out: \
  LINKER_SCRIPT  := stm32wb55xx_flash_cm4.ld


SRC_FILES += \
Src/main.c \
Src/stm32wbxx_it.c \
Src/stm32wbxx_hal_msp.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c \
Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \
Src/system_stm32wbxx.c\
startup_stm32wb55xx_cm4.s\
Src/a.cpp \

# Include folders common to all targets
INC_FOLDERS += \
Inc \
Drivers/STM32WBxx_HAL_Driver/Inc \
Drivers/STM32WBxx_HAL_Driver/Inc/Legacy \
Drivers/CMSIS/Device/ST/STM32WBxx/Include \
Drivers/CMSIS/Include \
Drivers/CMSIS/Include


# Libraries common to all targets
LIB_FILES += \


# Optimization flags
OPT = -O3 -g3
# Uncomment the line below to enable link time optimization
#OPT += -flto


# C flags common to all targets
CFLAGS += $(OPT)
CFLAGS += -DUSE_HAL_DRIVER
CFLAGS += -DSTM32WB55xx
CFLAGS += -mcpu=cortex-m4
CFLAGS += -mthumb -mabi=aapcs
CFLAGS += -Wall -Werror
CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
# keep every function in a separate section, this allows linker to discard unused ones
CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
CFLAGS += -fno-builtin -fshort-enums
ifeq ($(DEBUG), 1)
CFLAGS += -g -gdwarf-2
endif


# C++ flags common to all targets
CXXFLAGS += $(OPT)

# Assembler flags common to all targets
ASMFLAGS += -g3
ASMFLAGS += -mcpu=cortex-m4
ASMFLAGS += -mthumb -mabi=aapcs
ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16

# Linker flags
LDFLAGS += $(OPT)
LDFLAGS += -mthumb -mabi=aapcs -T$(LINKER_SCRIPT)
LDFLAGS += -mcpu=cortex-m4
LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
# let linker dump unused sections
LDFLAGS += -Wl,--gc-sections
# use newlib in nano version
LDFLAGS += --specs=nano.specs

# Add standard libraries at the very end of the linker input, after all objects
# that may need symbols provided by these libraries.
LIB_FILES += -lc -lnosys -lm -lstdc++


.PHONY: default help

# Default target - first one defined
default: stm32wb55xx

# Print all targets that can be built
help:
	@echo following targets are available:
	@echo		stm32wb55xx
	@echo		flash_softdevice
	@echo		sdk_config - starting external tool for editing sdk_config.h
	@echo		flash      - flashing binary

TEMPLATE_PATH := toolchain/gcc


include $(TEMPLATE_PATH)/Makefile.common

$(foreach target, $(TARGETS), $(call define_target, $(target)))

dump.mk

$(info $($(VARIABLE)))
all: ;

Makefile.common

# Copyright (c) 2016 - 2017, Nordic Semiconductor ASA
# 
# All rights reserved.
# 
# Redistribution and use in source and binary forms, with or without modification,
# are permitted provided that the following conditions are met:
# 
# 1. Redistributions of source code must retain the above copyright notice, this
#    list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form, except as embedded into a Nordic
#    Semiconductor ASA integrated circuit in a product or a software update for
#    such product, must reproduce the above copyright notice, this list of
#    conditions and the following disclaimer in the documentation and/or other
#    materials provided with the distribution.
# 
# 3. Neither the name of Nordic Semiconductor ASA nor the names of its
#    contributors may be used to endorse or promote products derived from this
#    software without specific prior written permission.
# 
# 4. This software, with or without modification, must only be used with a
#    Nordic Semiconductor ASA integrated circuit.
# 
# 5. Any software provided in binary form under this license must not be reverse
#    engineered, decompiled, modified and/or disassembled.
# 
# THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
# GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


# Options:
#   VERBOSE=1 (default is 0) - print each executed command
#   PRETTY=1  (default is 0) - show progress, in percentage
#   ABSOLUTE_PATHS=1 (default is 0) - convert all include folders and source
#     file paths to their absolute forms
#   PASS_INCLUDE_PATHS_VIA_FILE=1 (default is 0) - use .inc file
#     to pass include paths to gcc
#   PASS_LINKER_INPUT_VIA_FILE=0  (default is 1) - don't use .in file
#     to pass the list of linker input files
VERBOSE ?= 0
PRETTY  ?= 0
ABSOLUTE_PATHS ?= 0
PASS_INCLUDE_PATHS_VIA_FILE ?= 0
PASS_LINKER_INPUT_VIA_FILE  ?= 1

.SUFFIXES: # ignore built-in rules
%.d:       # don't try to make .d files
.PRECIOUS: %.d %.o

MK := mkdir
RM := rm -rf

# echo suspend
ifeq ($(VERBOSE),1)
  NO_ECHO :=
else
  NO_ECHO := @
endif

ifneq (,$(filter clean, $(MAKECMDGOALS)))

OTHER_GOALS := $(filter-out clean, $(MAKECMDGOALS))
ifneq (, $(OTHER_GOALS))
$(info Cannot make anything in parallel with "clean".)
$(info Execute "$(MAKE) clean \
  $(foreach goal, $(OTHER_GOALS),&& $(MAKE) $(goal))" instead.)
$(error Cannot continue)
else
.PHONY: clean
clean:
	$(RM) $(OUTPUT_DIRECTORY)
endif # ifneq(, $(OTHER_GOALS))

else # ifneq (,$(filter clean, $(MAKECMDGOALS)))

ifndef PROGRESS

ifeq ($(PRETTY),1)
    X     := @
    EMPTY :=
    SPACE := $(EMPTY) $(EMPTY)
    TOTAL := $(subst $(SPACE),,$(filter $(X), \
               $(shell "$(MAKE)" $(MAKECMDGOALS) --dry-run \
                 --no-print-directory PROGRESS=$(X))))

    5   := $(X)$(X)$(X)$(X)$(X)
    25  := $(5)$(5)$(5)$(5)$(5)
    100 := $(25)$(25)$(25)$(25)

    C       :=
    COUNTER  = $(eval C := $(C)$(100))$(C)
    P       :=
    count    = $(if $(filter $1%,$2),$(eval \
                 P += 1)$(call count,$1,$(2:$1%=%)),$(eval \
                 C := $2))
    print    = [$(if $(word 99,$1),99,$(if $(word 10,$1),, )$(words $1))%]
    PROGRESS = $(call count,$(TOTAL),$(COUNTER))$(call print,$(P)) $1
else
    PROGRESS = $1
endif # ifeq ($(PRETTY),1)

PLATFORM_SUFFIX := $(if $(filter Windows%,$(OS)),windows,posix)
TOOLCHAIN_CONFIG_FILE := $(TEMPLATE_PATH)/Makefile.$(PLATFORM_SUFFIX)
include $(TOOLCHAIN_CONFIG_FILE)

# $1 path
define quote
'$(subst ','\'',$(1))'
endef

# Toolchain commands
CC      := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-gcc)
CXX     := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-c++)
AS      := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-as)
AR      := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-ar) -r
LD      := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-ld)
NM      := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-nm)
OBJDUMP := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-objdump)
OBJCOPY := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-objcopy)
SIZE    := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-size)
$(if $(shell $(CC) --version),,$(info Cannot find: $(CC).) \
  $(info Please set values in: "$(abspath $(TOOLCHAIN_CONFIG_FILE))") \
  $(info according to the actual configuration of your system.) \
  $(error Cannot continue))

# Use ccache on linux if available
CCACHE := $(if $(filter Windows%,$(OS)),, \
               $(if $(wildcard /usr/bin/ccache),ccache))
CC     := $(CCACHE) $(CC)

endif # ifndef PROGRESS

# $1 type of item
# $2 items paths to check
define ensure_exists_each
$(foreach item, $(2), \
  $(if $(wildcard $(item)),, $(warning Cannot find $(1): $(item))))
endef

ifeq ($(PASS_INCLUDE_PATHS_VIA_FILE),1)
INC_PATHS = @$($@_INC)
GENERATE_INC_FILE := 1
else
INC_PATHS = $(call target_specific, INC_PATHS, $($@_TGT))
GENERATE_INC_FILE :=
endif

# $1 object file
# $2 source file
# $3 include paths container file
# $4 target name
define bind_obj_with_src
$(eval $(1)     := $(2)) \
$(eval $(1)_INC := $(3)) \
$(eval $(1)_TGT := $(4)) \
$(eval $(1): Makefile | $(dir $(1)).) \
$(if $(GENERATE_INC_FILE), $(eval $(1): $(3)))
endef

# $1 target name
# $2 source file name
# Note: this additional .o for .s files is a workaround for issues with make 4.1
#       from MinGW (it does nothing to remake .s.o files when a rule for .S.o
#       files is defined as well).
define get_object_file_name
$(OUTPUT_DIRECTORY)/$(strip $(1))/$(notdir $(2:%.s=%.s.o)).o
endef

# $1 target name
# $2 include paths container file
# $3 list of source files
define get_object_files
$(call ensure_exists_each,source file, $(3)) \
$(foreach src_file, $(3), \
  $(eval obj_file := $(call get_object_file_name, $(1), $(src_file))) \
  $(eval DEPENDENCIES += $(obj_file:.o=.d)) \
  $(call bind_obj_with_src, $(obj_file), $(src_file), $(2), $(1)) \
  $(obj_file))
endef

# $1 variable name
# $2 target name
define target_specific
$($(addsuffix _$(strip $(2)), $(1)))
endef

ifeq ($(ABSOLUTE_PATHS),1)
get_path = $(call quote,$(abspath $1))
else
get_path = $1
endif

# $1 list of include folders
define get_inc_paths
$(call ensure_exists_each,include folder,$(1)) \
$(foreach folder,$(1),-I$(call get_path,$(folder)))
endef

# $1 target name
# $2 include paths container file
# $3 build goal name
define prepare_build
$(eval DEPENDENCIES :=) \
$(eval $(3): \
  $(call get_object_files, $(1), $(2), \
    $(SRC_FILES) $(call target_specific, SRC_FILES, $(1)))) \
$(eval -include $(DEPENDENCIES)) \
$(eval INC_PATHS_$(strip $(1)) := \
  $(call get_inc_paths, \
    $(INC_FOLDERS) $(call target_specific, INC_FOLDERS, $(1))))
endef

# $1 target name
define define_target
$(eval OUTPUT_FILE := $(OUTPUT_DIRECTORY)/$(strip $(1))) \
$(eval $(1): $(OUTPUT_FILE).out $(OUTPUT_FILE).hex $(OUTPUT_FILE).bin \
           ; @echo DONE $(strip $(1))) \
$(call prepare_build, $(1), $(OUTPUT_FILE).inc, $(OUTPUT_FILE).out)
endef

# $1 target name
# $2 library file name
define define_library
$(eval OUTPUT_FILE := $(OUTPUT_DIRECTORY)/$(strip $(1))) \
$(eval $(1) := $(2)) \
$(call prepare_build, $(1), $(OUTPUT_FILE).inc, $(1))
endef

# $1 content to be dumped
# Invokes another instance of MAKE to dump the specified content to stdout,
# which may be then redirected in shell to a file and this way stored there.
# MAKE in version prior to 4.0 does not provide the $(file ...) function.
define dump
$(eval CONTENT_TO_DUMP := $(1)) \
"$(MAKE)" -s --no-print-directory \
  -f "$(TEMPLATE_PATH)/dump.mk" VARIABLE=CONTENT_TO_DUMP
endef
export CONTENT_TO_DUMP

.PHONY: $(TARGETS) all

all: $(TARGETS)

# Create build directories
$(OUTPUT_DIRECTORY):
	$(MK) $@
$(OUTPUT_DIRECTORY)/%/.: | $(OUTPUT_DIRECTORY)
	cd $(OUTPUT_DIRECTORY) && $(MK) $*

$(OUTPUT_DIRECTORY)/%.inc: Makefile | $(OUTPUT_DIRECTORY)
	$(info Generating $@)
	$(NO_ECHO)$(call dump, $(call target_specific, INC_PATHS, $*)) > $@

# $1 command
# $2 flags
# $3 message
define run
$(info $(call PROGRESS,$(3) file: $(notdir $($@)))) \
$(NO_ECHO)$(1) -MP -MD -c -o $@ $(call get_path,$($@)) $(2) $(INC_PATHS)
endef

# Create object files from C source files
%.c.o:
	$(call run,$(CC) -std=c99,$(CFLAGS),Compiling)


# Create object files from C++ source files
%.cpp.o:
	$(call run,$(CXX),$(CFLAGS) $(CXXFLAGS),Compiling C++)

# Create object files from assembly source files
%.S.o %.s.o.o:
	$(call run,$(CC) -x assembler-with-cpp,$(ASMFLAGS),Assembling)

ifeq ($(PASS_LINKER_INPUT_VIA_FILE),1)
GENERATE_LD_INPUT_FILE = $(call dump, $^ $(LIB_FILES)) > $(@:.out=.in)
LD_INPUT               = @$(@:.out=.in)
else
GENERATE_LD_INPUT_FILE =
LD_INPUT               = $^ $(LIB_FILES)
endif

# Link object files
%.out:
	$(info $(call PROGRESS,Linking target: $@))
	$(NO_ECHO)$(GENERATE_LD_INPUT_FILE)
	$(NO_ECHO)$(CC) $(LDFLAGS) $(LD_INPUT) -Wl,-Map=$(@:.out=.map) -o $@
	$(NO_ECHO)$(SIZE) $@

# Create binary .bin file from the .out file
%.bin: %.out
	$(info Preparing: $@)
	$(NO_ECHO)$(OBJCOPY) -O binary $< $@

# Create binary .hex file from the .out file
%.hex: %.out
	$(info Preparing: $@)
	$(NO_ECHO)$(OBJCOPY) -O ihex $< $@

endif # ifneq (,$(filter clean, $(MAKECMDGOALS)))

 

 

Makefile.posix

 

GNU_INSTALL_ROOT ?= /usr/local/gcc-arm-none-eabi-9-2020-q2/gcc-arm-none-eabi-9-2020-q2-update/bin/
GNU_VERSION ?= 9.3.1
GNU_PREFIX ?= arm-none-eabi

Makefile.windows

 

GNU_INSTALL_ROOT := C:/Program Files (x86)/GNU Tools ARM Embedded/7 2018-q2-update/bin/
GNU_VERSION := 7.3.1
GNU_PREFIX := arm-none-eabi