abaqus6.14导出网格inp以及导入inp以建模

建好part，组装后，划分网格，然后建立job，之后write input就可以在工作目录生成刚才新建网格的单元和节点编号信息了。

 1 *Heading
 2 ** Job name: buildmodel Model name: Model-1
 3 ** Generated by: Abaqus/CAE 6.14-1
 4 *Preprint, echo=NO, model=NO, history=NO, contact=NO
 5 **
 6 ** PARTS
 7 **
 8 *Part, name=Part-1
 9 *Node
10       1,          25.,          15.,           5.
11       2,          25.,          10.,           5.
12       3,          25.,           5.,           5.
13       4,          25.,           0.,           5.
14       5,          25.,          15.,           0.
15       6,          25.,          10.,           0.
16       7,          25.,           5.,           0.
17       8,          25.,           0.,           0.
18       9,          20.,          15.,           5.
19      10,          20.,          10.,           5.
20      11,          20.,           5.,           5.
21      12,          20.,           0.,           5.
22      13,          20.,          15.,           0.
23      14,          20.,          10.,           0.
24      15,          20.,           5.,           0.
25      16,          20.,           0.,           0.
26      17,          15.,          15.,           5.
27      18,          15.,          10.,           5.
28      19,          15.,           5.,           5.
29      20,          15.,           0.,           5.
30      21,          15.,          15.,           0.
31      22,          15.,          10.,           0.
32      23,          15.,           5.,           0.
33      24,          15.,           0.,           0.
34      25,          10.,          15.,           5.
35      26,          10.,          10.,           5.
36      27,          10.,           5.,           5.
37      28,          10.,           0.,           5.
38      29,          10.,          15.,           0.
39      30,          10.,          10.,           0.
40      31,          10.,           5.,           0.
41      32,          10.,           0.,           0.
42      33,           5.,          15.,           5.
43      34,           5.,          10.,           5.
44      35,           5.,           5.,           5.
45      36,           5.,           0.,           5.
46      37,           5.,          15.,           0.
47      38,           5.,          10.,           0.
48      39,           5.,           5.,           0.
49      40,           5.,           0.,           0.
50      41,           0.,          15.,           5.
51      42,           0.,          10.,           5.
52      43,           0.,           5.,           5.
53      44,           0.,           0.,           5.
54      45,           0.,          15.,           0.
55      46,           0.,          10.,           0.
56      47,           0.,           5.,           0.
57      48,           0.,           0.,           0.
58 *Element, type=C3D8R
59  1,  9, 10, 14, 13,  1,  2,  6,  5
60  2, 10, 11, 15, 14,  2,  3,  7,  6
61  3, 11, 12, 16, 15,  3,  4,  8,  7
62  4, 17, 18, 22, 21,  9, 10, 14, 13
63  5, 18, 19, 23, 22, 10, 11, 15, 14
64  6, 19, 20, 24, 23, 11, 12, 16, 15
65  7, 25, 26, 30, 29, 17, 18, 22, 21
66  8, 26, 27, 31, 30, 18, 19, 23, 22
67  9, 27, 28, 32, 31, 19, 20, 24, 23
68 10, 33, 34, 38, 37, 25, 26, 30, 29
69 11, 34, 35, 39, 38, 26, 27, 31, 30
70 12, 35, 36, 40, 39, 27, 28, 32, 31
71 13, 41, 42, 46, 45, 33, 34, 38, 37
72 14, 42, 43, 47, 46, 34, 35, 39, 38
73 15, 43, 44, 48, 47, 35, 36, 40, 39
74 *End Part
75 **  
76 **
77 ** ASSEMBLY
78 **
79 *Assembly, name=Assembly
80 **  
81 *Instance, name=Part-1-1, part=Part-1
82 *End Instance
83 **  
84 *End Assembly

buildModel.inp

 

---

导入inp以建模：

 

 

 

转载于:https://www.cnblogs.com/zhubinglong/p/9163642.html