Tuning-primer.sh 检测mysql当前的运行情况，产生报告，并给出优化建议。
下载及使用：
1.wget http://www.day32.com/MySQL/tuning-primer.sh
2.将tuning-primer.sh拷贝到my.cnf同级目录
3.chmod +xtuning-primer.sh 执行：sh tuning-primer.sh
[root@DG-webDB software]#./tuning-primer.sh all
Using login values from ~/.my.cnf
- INITIAL LOGIN ATTEMPT FAILED -
Testing for stored webmin passwords:
NoneFound
Could not auto detect login info!
Found potential sockets:/home/mysql/data/mysql.sock
Using: /home/mysql/data/mysql.sock
Would you like to provide a differentsocket?: [y/N] n
Do you have your login handy ? [y/N] : y
User: root
Password: anyu@2015
Would you like me to create a ~/.my.cnffile for you? [y/N] : n
-- MYSQL PERFORMANCE TUNING PRIMER --
- By: Matthew Montgomery -
MySQL Version 5.5.17-log x86_64
Uptime = 5 days 18 hrs 32 min 31 sec
Avg. qps = 0
Total Questions = 106649
Threads Connected = 1
Server has been running for over 48hrs.
It should be safe to follow theserecommendations
To find out more information on how each ofthese
runtime variables effects performancevisit:
http://dev.mysql.com/doc/refman/5.5/en/server-system-variables.html
Visithttp://www.mysql.com/products/enterprise/advisors.html
for info about MySQL's EnterpriseMonitoring and Advisory Service
# 慢查询检查
SLOW QUERIES
The slow query log is enabled.
Current long_query_time = 3.000000 sec.
You have 0 out of 106670 that take longerthan 3.000000 sec. to complete
Your long_query_time seems to be fine
#二进制日志检查
BINARY UPDATE LOG
The binary update log is enabled
# 工作线程检查
WORKER THREADS
Current thread_cache_size = 64
Current threads_cached = 4
Current threads_per_sec = 0
Historic threads_per_sec = 0
Your thread_cache_size is fine
# 链接检查
MAX CONNECTIONS
Current max_connections = 2000
Current threads_connected = 1
Historic max_used_connections = 5
The number of used connections is 0% of theconfigured maximum.
You are using less than 10% of yourconfigured max_connections.
Lowering max_connections could help toavoid an over-allocation of memory
See "MEMORY USAGE" section tomake sure you are not over-allocating
# innodb状态检查
INNODB STATUS
Current InnoDB index space = 80 K
Current InnoDB data space = 224 K
Current InnoDB buffer pool free = 99 %
Current innodb_buffer_pool_size = 4.00 G
Depending on how much space your innodbindexes take up it may be safe
to increase this value to up to 2 / 3 oftotal system memory
# 内存状态检查
MEMORY USAGE
Max Memory Ever Allocated : 4.30 G
Configured Max Per-thread Buffers : 4.21 G
Configured Max Global Buffers : 4.29 G
Configured Max Memory Limit : 8.50 G
Physical Memory : 7.68 G
Max memory limit exceeds 90% of physicalmemory
# myisam 键值状态检查
KEY BUFFER
Current MyISAM index space = 105 K
Current key_buffer_size = 256 M
Key cache miss rate is 1 : 2
Key buffer free ratio = 81 %
Your key_buffer_size seems to be fine
# 查询缓存检查
QUERY CACHE
Query cache is supported but not enabled
Perhaps you should set the query_cache_size
# 排序操作检查
SORT OPERATIONS
Current sort_buffer_size = 1 M
Current read_rnd_buffer_size = 512 K
Sort buffer seems to be fine
# 表链接检查
JOINS
Current join_buffer_size = 132.00 K
You have had 0 queries where a join couldnot use an index properly
Your joins seem to be using indexesproperly
# 文件限制检查
OPEN FILES LIMIT
Current open_files_limit = 65535 files
The open_files_limit should typically beset to at least 2x-3x
that of table_cache if you have heavyMyISAM usage.
Your open_files_limit value seems to befine
# 变缓存检查
TABLE CACHE
Current table_open_cache = 4220 tables
Current table_definition_cache = 400 tables
You have a total of 55 tables
You have 56 open tables.
The table_cache value seems to be fine
# 临时表检查状态检查
TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 16 M
Of 53466 temp tables, 0% were created ondisk
Created disk tmp tables ratio seems fine
# 表扫描检查
TABLE SCANS
Current read_buffer_size = 256 K
Current table scan ratio = 52589 : 1
You have a high ratio of sequential acce***equests to SELECTs
You may benefit from raisingread_buffer_size and/or improving your use of indexes.
# 表锁检查
TABLE LOCKING
Current Lock Wait ratio = 1 : 91130
Your table locking seems to be fine
和 mysqltunner.sql 相比 tuning-primer的检测的更详细,主要是针对innodb的检测，
Mysqltunner.sql 不能对innodb进行检查的。