为openwrt 15.05(Chaos Calmer) 新增优酷土豆路由宝配置

一 主要修改的文件有：

• 修改： target/linux/ramips/base-files/etc/board.d/01_leds
• 修改： target/linux/ramips/base-files/etc/board.d/02_network
• 修改： target/linux/ramips/base-files/lib/ramips.sh
• 修改： target/linux/ramips/base-files/lib/upgrade/platform.sh
• 修改： target/linux/ramips/image/Makefile
• 新增： target/linux/ramips/dts/YOUKU.dts 

二 文件修改

• 修改： target/linux/ramips/base-files/etc/board.d/01_leds新增youku节点

•     xiaomi-miwifi-mini)
          ucidef_set_led_default "power" "power" "xiaomi:red:status" "1"
          ;;
      youku)
          ucidef_set_led_default "power" "power" "youku-yk1:blue:power" "1"
          ucidef_set_led_default "wan" "wan" "youku-yk1:blue:wan" "1"
          set_wifi_led "youku-yk1:blue:air"
          set_usb_led "youku-yk1:blue:usb"
          ;;
      y1 |\
      y1s)
          ucidef_set_led_default "power" "power" "lenovo:blue:power" "1"
          set_usb_led "lenovo:blue:usb"
          set_wifi_led "lenovo:blue:wifi"               ;;   

• 修改： target/linux/ramips/base-files/etc/board.d/02_network

• •     3g-6200n | \
        ai-br100 | \
        dir-610-a1 | \
        dir-300-b7 | \
        dir-320-b1 | \
        dir-615-h1 | \
        firewrt | \
        pbr-m1 | \
        hlk-rm04 | \
        mt7621 | \
        mt7628 | \
        mzk-w300nh2 | \
        mzk-750dhp | \
        whr-300hp2 | \
        whr-600d | \
        wsr-600 | \
        wsr-1166 | \
        wt1520 | \
        xiaomi-miwifi-mini |\
        youku |\
        y1|\
        zbt-wg2626)
            ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
            ucidef_add_switch "switch0" "1" "1"
            ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
            ucidef_add_switch_vlan "switch0" "2" "4 6t"
            ;;
    

  • 修改： target/linux/ramips/base-files/lib/ramips.sh

  •     *"Xiaomi MiWiFi Mini")
            name="xiaomi-miwifi-mini"
            ;;
        *"YOUKU")
            name="youku"
            ;;
        *"Sercomm NA930")
            name="na930"
            ;;
    

  • 修改： target/linux/ramips/base-files/lib/upgrade/platform.sh

  •     wr6202 |\
        wr8305rt |\
        wrtnode |\
        wt1520 |\
        wt3020 |\
        x5 |\
        x8 |\
        xiaomi-miwifi-mini |\
        youku |\
        y1 |\
        y1s |\
        zbt-wa05 |\
        zbt-wg2626 |\
        zte-q7)
            [ "$magic" != "27051956" ] && {
                echo "Invalid image type."
                return 1
            }
            return 0
            ;;
    

  • 修改： target/linux/ramips/image/Makefile

  • Image/Build/Profile/YOUKU=$(call BuildFirmware/Default32M/$(1),$(1),YOUKU,YOUKU)
    #Image/Build/Profile/E1700=$(call BuildFirmware/UMedia/$(1),$(1),e1700,E1700,0x013326)
    #ex2700_mtd_size=3866624
    #Image/Build/Profile/EX2700=$(call BuildFirmware/Netgear/$(1),$(1),ex2700,EX2700,65536,29764623+4+0+32+2x2+0,$(ex2700_mtd_size))
    #Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
    #Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
    #Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
    #Image/Build/Profile/MT7620a_V22SG=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG)
    #br100_mtd_size=8126464
    #Image/Build/Profile/AIBR100=$(call BuildFirmware/CustomFlash/$(1),$(1),ai-br100,AIBR100,$(br100_mtd_size),Ai-BR)
    #Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
    #whr_300hp2_mtd_size=7012352
    #Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
    #Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size))
    #whr_1166d_mtd_size=15400960
    #Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166hd_mtd_size))
    #dlink810l_mtd_size=6881280
    #Image/Build/Profile/CF-WR800N=$(call BuildFirmware/Default8M/$(1),$(1),cf-wr800n,CF-WR800N)
    #Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
    #na930_mtd_size=20971520
    #Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
    #Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
    #Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1)
    #Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S)
    #Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
    #Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2)
    #Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
    #Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
    #Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
    #Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
    #Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
    #Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),xiaomi-miwifi-mini,XIAOMI-MIWIFI-MINI)
    #Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
    #Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
    #Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
    #microwrt_mtd_size=16515072
    #Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size))
    
    
    ifeq ($(SUBTARGET),mt7620)
    define Image/Build/Profile/Default
        $(call Image/Build/Profile/YOUKU,$(1))
    #    $(call Image/Build/Profile/E1700,$(1))
    #    $(call Image/Build/Profile/EX2700,$(1))
    #    $(call Image/Build/Profile/MT7620a,$(1))
    #    $(call Image/Build/Profile/MT7620a_MT7610e,$(1))
    #    $(call Image/Build/Profile/MT7620a_MT7530,$(1))
    #    $(call Image/Build/Profile/MT7620a_V22SG,$(1))
    #    $(call Image/Build/Profile/CF-WR800N,$(1))
    #    $(call Image/Build/Profile/RP-N53,$(1))
    #    $(call Image/Build/Profile/DIR-810L,$(1))
    #    $(call Image/Build/Profile/WHR300HP2,$(1))
    #    $(call Image/Build/Profile/WHR600D,$(1))
    #    $(call Image/Build/Profile/WHR1166D,$(1))
    #    $(call Image/Build/Profile/MZK-750DHP,$(1))
    #    $(call Image/Build/Profile/NA930,$(1))
    #    $(call Image/Build/Profile/Y1,$(1))
    #    $(call Image/Build/Profile/Y1S,$(1))
    #    $(call Image/Build/Profile/MLW221,$(1))
    #    $(call Image/Build/Profile/MLWG2,$(1))
    #    $(call Image/Build/Profile/WMR300,$(1))
    #    $(call Image/Build/Profile/RT-N14U,$(1))
    #    $(call Image/Build/Profile/WR8305RT,$(1))
    #    $(call Image/Build/Profile/WRTNODE,$(1))
    #    $(call Image/Build/Profile/WT3020,$(1))
    #    $(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1))
    #    $(call Image/Build/Profile/ZTE-Q7,$(1))
    #    $(call Image/Build/Profile/ZBT-WA05,$(1))
    #    $(call Image/Build/Profile/ArcherC20i,$(1))
    #    $(call Image/Build/Profile/MicroWRT,$(1))
    endef
    endif
    

  • 新增： target/linux/ramips/dts/YOUKU.dts

  • /dts-v1/;
    
    /include/ "mt7620a.dtsi"
    
    / {
        compatible = "YOUKU", "ralink,mt7620a-soc";
        model = "YOUKU";
    
        chosen {
            bootargs = "console=ttyS0,115200";
        };
    
        palmbus@10000000 {
            gpio0: gpio@600 {
                status = "okay";
            };
    
            gpio1: gpio@638 {
                status = "okay";
            };
    
            gpio2: gpio@660 {
                status = "okay";
            };
    
            spi@b00 {
                status = "okay";
    
                m25p80@0 {
                    #address-cells = <1>;
                    #size-cells = <1>;
                    compatible = "w25q128";
                    reg = <0 0>;
                    linux,modalias = "m25p80", "w25q128";
                    spi-max-frequency = <10000000>;
    
                    partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                    };
    
                    partition@30000 {
                        label = "u-boot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                    };
    
                    factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                    };
    
                    partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x1f80000>;
                    };
    
                    partition@1fd0000 {
                        label = "crash";
                        reg = <0x1fd0000 0x10000>;
                    };
    
                    partition@1fe0000 {
                        label = "reserved";
                        reg = <0x1fe0000 0x10000>;
                        read-only;
                    };
    
                    partition@1ff0000 {
                        label = "Bdata";
                        reg = <0x1ff0000 0x10000>;
                    };
                };
            };
        };
    
        ehci@101c0000 {
            status = "okay";
        };
    
        ohci@101c1000 {
            status = "okay";
        };
    
        sdhci@10130000 {
            status = "okay";
        };
    
        ethernet@10100000 {
            pinctrl-names = "default";
            pinctrl-0 = <&ephy_pins>;
            mtd-mac-address = <&factory 0x4>;
            ralink,port-map = "llllw";
        };
    
        wmac@10180000 {
            ralink,mtd-eeprom = <&factory 0>;
        };
    
        pcie@10140000 {
            status = "okay";
    
            pcie-bridge {
                mt76@0,0 {
                    reg = <0x0000 0 0 0 0>;
                    device_type = "pci";
                    mediatek,mtd-eeprom = <&factory 0x8000>;
                    mediatek,2ghz = <0>;
                };
            };
        };
    
        pinctrl {
            state_default: pinctrl0 {
                gpio {
                    ralink,group = "i2c", "rgmii1";
                    ralink,function = "gpio";
                };
            };
        };
    
        gpio-leds {
            compatible = "gpio-leds";
            wan {
                label = "youku-yk1:blue:wan";
                gpios = <&gpio2 4 1>;
            };
            air {
                label = "youku-yk1:blue:air";
                gpios = <&gpio3 0 1>;
            };
            usb {
                label = "youku-yk1:blue:usb";
                gpios = <&gpio1 11 1>;
            };
            power {
                label = "youku-yk1:blue:power";
                gpios = <&gpio1 5 1>;
            };
        };
    
        gpio-keys-polled {
            compatible = "gpio-keys-polled";
            #address-cells = <1>;
            #size-cells = <0>;
            poll-interval = <20>;
            reset {
                label = "reset";
                gpios = <&gpio0 1 1>;
                linux,code = <0x198>;
            };
        };
    };

  
  

• 转载自：http://www.tuicool.com/articles/VZba6r3