uboot移植rtc
uboot中可能会有需求提供rtc的支持目的达到uboot启动也可以进行墙上时间的显示和后面判断。大部分rtc支持的一个必要条件就是已经有i2c的支持。因为很多的rtc是i2c接口控制的，uboot中i2c的移植在前一篇中已经提过。这里就只做rtc的移植。这里选择了常用的一款rtc芯片pcf8653来分析。
第一步 开启支持的选项，
uboot/include/configs/mpc5200-common.h这个配置文件中开启了8653这个芯片的支持。
/*
* RTC configuration
*/
define CONFIG_RTC_PCF8563
define CONFIG_SYS_I2C_RTC_ADDR 0x51
这里定义了8653的开启配置和他的i2c的device id
第二步：uboot/drivers/rtc/Makefile
COBJS-$(CONFIG_RTC_PCF8563) += pcf8563.o
确定有这么一条，如果移植里面不存在的你就要自己添加了。
第三步 实现pcf8563.c 这个文件，这个就相当于新建立一个命令。但是这个命令还是uboot做了统一的，这样就可以方便使用者了。
/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, [email protected].
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Date & Time support for Philips PCF8563 RTC
*/
/* #define DEBUG */
include
include
include
include
if defined(CONFIG_CMD_DATE)
static uchar rtc_read (uchar reg);
static void rtc_write (uchar reg, uchar val);
/* ————————————————————————- */
int rtc_get (struct rtc_time *tmp)
{
int rel = 0;
uchar sec, min, hour, mday, wday, mon_cent, year;
sec = rtc_read (0x02)-0x80;
min = rtc_read (0x03);
hour = rtc_read (0x04);
mday = rtc_read (0x05);
wday = rtc_read (0x06);
mon_cent= rtc_read (0x07);
year = rtc_read (0x08);
debug ( "Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
"hr: %02x min: %02x sec: %02x\n",
year, mon_cent, mday, wday,
hour, min, sec );
debug( "Alarms: wday: %02x day: %02x hour: %02x min: %02x\n",
rtc_read (0x0C),
rtc_read (0x0B),
rtc_read (0x0A),
rtc_read (0x09) );
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
/*
if (sec & 0x80) {
puts (“xu Warning: RTC Low Voltage - date/time not reliable\n”);
rel = -1;
}
*/
tmp->tm_sec = bcd2bin (sec & 0x7F);
tmp->tm_min = bcd2bin (min & 0x7F);
tmp->tm_hour = bcd2bin (hour & 0x3F);
tmp->tm_mday = bcd2bin (mday & 0x3F);
tmp->tm_mon = bcd2bin (mon_cent & 0x1F);
tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900);
tmp->tm_wday = bcd2bin (wday & 0x07);
tmp->tm_yday = 0;
tmp->tm_isdst= 0;
debug( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
return rel;
- 1
- 2
- 3
- 4
- 5
- 6
}
int rtc_set (struct rtc_time *tmp)
{
uchar century;
debug ( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
rtc_write (0x08, bin2bcd(tmp->tm_year % 100));
century = (tmp->tm_year >= 2000) ? 0x80 : 0;
rtc_write (0x07, bin2bcd(tmp->tm_mon) | century);
rtc_write (0x06, bin2bcd(tmp->tm_wday));
rtc_write (0x05, bin2bcd(tmp->tm_mday));
rtc_write (0x04, bin2bcd(tmp->tm_hour));
rtc_write (0x03, bin2bcd(tmp->tm_min ));
rtc_write (0x02, bin2bcd(tmp->tm_sec ));
return 0;
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
}
void rtc_reset (void)
{
/* clear all control & status registers */
rtc_write (0x00, 0x00);
rtc_write (0x01, 0x00);
rtc_write (0x0D, 0x00);
/* clear Voltage Low bit */
rtc_write (0x02, rtc_read (0x02) & 0x7F);
/* reset all alarms */
rtc_write (0x09, 0x00);
rtc_write (0x0A, 0x00);
rtc_write (0x0B, 0x00);
rtc_write (0x0C, 0x00);
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
}
/* ————————————————————————- */
static uchar rtc_read (uchar reg)
{
return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val)
{
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
endif
这俩可以看到
开启CONFIG_CMD_DATE 这个配置
在uboot/include/rtc.h中也是同样对rtc定义了几个标准函数：
int rtc_get (struct rtc_time *);
int rtc_set (struct rtc_time *);
void rtc_reset (void);
void GregorianDay (struct rtc_time *);
void to_tm (int, struct rtc_time *);
unsigned long mktime (unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int, unsigned int);
我们上面的8563文件中也是对应的实现这几个函数。按照标准的参数配置回应标准的数据或者配置。
这里还要关心一个date.c的文件 这个文件实现了date命令unsigned long mktime (unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int, unsigned int);