QT-Qpixmap实现图片鼠标缩放,鼠标拖动示例(详解)

通过 QPainter 绘画实现,以本地图片985*740为例
转载地址:https://www.cnblogs.com/lifexy/p/9057046.html
如下图所示:
QT-Qpixmap实现图片鼠标缩放,鼠标拖动示例(详解)_第1张图片
效果如下所示:

实现原理

主要通过以下函数实现:

void QPainter::drawTiledPixmap ( int x, int y, int w int h const QPixmap & pixmap, int sx = 0, int sy = 0 );
      //平铺显示pixmap
      //x y w h :表示绘画区域
      //sx  sy  :表示Qpixmap绘画起始位置

只要算出x y w h sx sy就能实现超出窗口不显示的效果

举个例子,如下图所示,居中显示1200*1200时:
QT-Qpixmap实现图片鼠标缩放,鼠标拖动示例(详解)_第2张图片
当图片左偏移600时,也就是offset=-600时,则只能在窗口上显示一半的图片:
QT-Qpixmap实现图片鼠标缩放,鼠标拖动示例(详解)_第3张图片
代码实现

widget.h:

#ifndef WIDGET_H
#define WIDGET_H

#include 
#include 

class Widget : public QWidget
{
    Q_OBJECT

private :
    QPixmap  *pix;
    int action;          //动作(放大,缩小,移动...)
    int pixW;            //图片宽
    int pixH;            //图片高

    QRect Paint;         //绘画区域

    float ratio;                //比例
    QPoint offset;              //一次的图片偏移值
    QPoint Alloffset;           //总偏移
    QLabel label;

    QPushButton  BigButton;
    QPushButton  LittleButton;
    QPushButton  LiftButton;
    QPushButton  RightButton;
    QPushButton  UpButton;
    QPushButton  DownButton;

    void AddComboItem(QComboBox* cmbo);
    bool event(QEvent * event);
    void wheelEvent(QWheelEvent* e);     //鼠标滑轮事件
private slots:
    void    onUpClicked();
    void    onDownClicked();
    void    OnLiftClicked();
    void    OnRightClicked();
    void    onLittleClicked();
    void    onBigClicked();


   void paintEvent(QPaintEvent *event);
public:
    explicit Widget();

    enum  Type {
        None          = 0,
        Amplification ,
        Shrink,
        Lift,
        Right,
        Up,
        Down,
        Move
    };

};
#endif // WIDGET_H

widget.cpp:

#include "widget.h"

Widget::Widget():
    BigButton("放大",this),
    LittleButton("缩小",this),
    LiftButton("向左",this),
    RightButton("向右",this),
    UpButton("向上",this),
    DownButton("向下",this),
    Paint(10,10,810,810),
    Alloffset(0,0),
    label("100%",this)
{
    ratio= 1.0;             //初始化图片缩放比例
    action = Widget::None;
    pixW = 985;            //设置图片尺寸为985*740
    pixH = 740;

    pix = new QPixmap;
    pix->load(":/pic/img.jpg");

    BigButton.setGeometry(822,10,60,25);
    connect(&BigButton,SIGNAL(clicked()),this,SLOT(onBigClicked()));

    LittleButton.setGeometry(822,40,60,25);
    connect(&LittleButton,SIGNAL(clicked()),this,SLOT(onLittleClicked()));

    LiftButton.setGeometry(822,70,60,25);
    connect(&LiftButton,SIGNAL(clicked()),this,SLOT(OnLiftClicked()));
    RightButton.setGeometry(822,100,60,25);
    connect(&RightButton,SIGNAL(clicked()),this,SLOT(OnRightClicked()));
    UpButton.setGeometry(822,130,60,25);
    connect(&UpButton,SIGNAL(clicked()),this,SLOT(onUpClicked()));
    DownButton.setGeometry(822,160,60,25);
    connect(&DownButton,SIGNAL(clicked()),this,SLOT(onDownClicked()));
    label.move(840,200);
    resize(890,850);

}

bool Widget::event(QEvent * event)
{
    static bool press=false;
    static QPoint PreDot;

    if(event->type() == QEvent::MouseButtonPress )
    {
           QMouseEvent *mouse = dynamic_cast<QMouseEvent* >(event);

           //判断鼠标是否是左键按下,且鼠标位置是否在绘画区域
           if(mouse->button()==Qt::LeftButton &&Paint.contains(mouse->pos()))
           {
               press=true;
               //QApplication::setOverrideCursor(Qt::OpenHandCursor); //设置鼠标样式
               this->setCursor(Qt::OpenHandCursor);

               PreDot = mouse->pos();
           }

    }
else if(event->type() == QEvent::MouseButtonRelease)
{
    QMouseEvent *mouse = dynamic_cast<QMouseEvent* >(event);

    //判断鼠标是否是左键释放,且之前是在绘画区域
    if(mouse->button()==Qt::LeftButton && press )
    {
        //QApplication::setOverrideCursor(Qt::ArrowCursor); //改回鼠标样式
        this->setCursor((Qt::ArrowCursor));
        press=false;
    }
}

 if(event->type() == QEvent::MouseMove)              //移动图片
 {
      if(press)
     {
        QMouseEvent *mouse = dynamic_cast<QMouseEvent* >(event);

        offset.setX(mouse->x() - PreDot.x());
        offset.setY(mouse->y() - PreDot.y());
        PreDot = mouse->pos();
        action = Widget::Move;
        this->update();
     }
 }
return QWidget::event(event);
}

void Widget::wheelEvent(QWheelEvent* event)     //鼠标滑轮事件
{
 if (event->delta()>0) {      //上滑,缩小

    action=Widget::Shrink;
    this->update();

 } else {                    //下滑,放大
     action=Widget::Amplification;
     this->update();
 }

 event->accept();
}



void Widget::paintEvent(QPaintEvent *event)
{
  QPainter painter(this);
  int NowW = ratio *pixW;
  int NowH = ratio *pixH;

if(action==Widget::Amplification)           //缩小
{
      ratio-=0.1*ratio;
    if(ratio<0.018)
      ratio = 0.01;

    /*显示比例*/
    QString str;
    str.sprintf("%.0f%",ratio*100);
    label.setText(str) ;
}
else  if(action==Widget::Shrink)           //放大
{

     ratio+=0.1*ratio;
   if(ratio>4.5)
     ratio = 5.000;

    /*显示比例*/
    QString str;
    str.sprintf("%.0f%",ratio*100);
    label.setText(str);
}
if(action==Widget::Amplification || action==Widget::Shrink)      //更新图片
{
  NowW = ratio *pixW;
  NowH = ratio *pixH;
  pix->load(":/pic/img.jpg");                 //重新装载,因为之前的图片已经被缩放过
  *pix = pix->scaled(NowW, NowH,Qt::KeepAspectRatio);
  action=Widget::None;

}

if(action==Widget::Move)                    //移动
{
    int offsetx=Alloffset.x()+offset.x();
    Alloffset.setX(offsetx);

    int offsety=Alloffset.y()+offset.y();
    Alloffset.setY(offsety);
    action=Widget::None;
}

if(abs(Alloffset.x())>=(Paint.width()/2 + NowW/2 -10))    //限制X偏移值
{
    if(Alloffset.x()>0)
        Alloffset.setX(Paint.width()/2 + NowW/2 -10);
    else
     Alloffset.setX(-Paint.width()/2 + -NowW/2 +10);
}
if(abs(Alloffset.y())>=(Paint.height()/2 + NowH/2 -10))    //限制Y偏移值
{
    if(Alloffset.y()>0)
        Alloffset.setY(Paint.height()/2 + NowH/2 -10);
    else
     Alloffset.setY(-Paint.height()/2 + -NowH/2 +10);

}

int x = Paint.width()/2 + Alloffset.x() -NowW/2;
if(x<0)
    x=0;

int y = Paint.height()/2 + Alloffset.y() -NowH/2;
if(y<0)
    y=0;

int  sx = NowW/2 - Paint.width()/2 - Alloffset.x();
if(sx<0)
    sx=0;

int  sy = NowH/2 - Paint.height()/2 - Alloffset.y();
if(sy<0)
    sy=0;

int w =(NowW - sx)>Paint.width()? Paint.width() : (NowW - sx);
if(w>(Paint.width()-x))
    w = Paint.width()-x;

int h =(NowH - sy)>Paint.height()? Paint.height() : (NowH - sy);
if(h>(Paint.height()-y))
    h = Paint.height()-y;

  painter.drawRect(Paint.x()-1,Paint.y()-1,Paint.width()+1,Paint.height()+1); //画框
  painter.drawTiledPixmap(x+Paint.x(),y+Paint.y(),w,h,*pix,sx,sy);             //绘画图形
}

void  Widget::onLittleClicked()
{
  action=Widget::Amplification;
  this->update();
}

void  Widget::onBigClicked()
{
  action=Widget::Shrink;
  this->update();
}
void Widget::onUpClicked()
{
  action=Widget::Move;
  offset.setX(0);
  offset.setY(-20);

  this->update();
}
void Widget::onDownClicked()
{
  action=Widget::Move;
  offset.setX(0);
  offset.setY(20);
  this->update();
}
void Widget::OnLiftClicked()
{
  action=Widget::Move;
  offset.setX(-20);
  offset.setY(0);

  this->update();
}
void Widget::OnRightClicked()
{
  action=Widget::Move;
  offset.setX(20) ;
  offset.setY(0) ;

  this->update();
}

实现原理分析:

  1. 在event函数中,捕获并响应鼠标左键按下,移动和释放事件。
    1) 判断是否为鼠标单击事件,并将基本Qt事件投射到鼠标事件
    判断是否是左键按下,判断鼠标是否在绘图区域
    若前述成立,设置鼠标按下标志位为true,改变鼠标样式,记录下鼠标当前坐标
    2)判断是否为鼠标按下事件,并将基本Qt事件投射到子类(鼠标事件)
    判断是否是鼠标左键按下,并读取鼠标按下标志位
    若前述成立,则标志着整个拖放事件完成,重设鼠标样式,复位鼠标按下标志位,即鼠标按下时,既可以响应拖放事件,也可以响应缩放事件
    3)判断鼠标移动事件
    判断鼠标按下标志位,并将基本Qt事件投射到子类(鼠标事件)
    若前述成立,根据鼠标左键按下事件和当前鼠标位置,设置鼠标偏移量。并更新记录鼠标当前值,设置窗口重构事件为移动事件,更新窗口显示
  2. 在wheelEvent事件中,判断滚轮滚动方向。设置窗口重构事件为Shrink或者 Amplification。更新窗口显示,结束滚轮事件。
  3. paintEvent用于响应窗口重构事件,更新窗口显示
    1)如果为缩小放大事件,重新设置缩放率,并且重新载入图片
    2)如果为移动事件,将偏移值传递给位置坐标
    3)最后需要设置x,y,w,h,sx,sy,其中x,y,w,h代表绘图的区域,sx,sy代表从原始图片中截取的左上角坐标。

你可能感兴趣的:(Qt)