OAI 5G NR搭建gNB和UE（更新中）
OAI 5G NR搭建gNB和nrUE
有做这个的可以加我QQ ：2336508196一起交流学习
ubuntu 18.04
USRP N310
安装UHD驱动[1]
我们将在GitHub上git clone UHD源码库，切换到源码库的特定版本，然后从源代码构建和安装。
第一，在home目录下新建一个文件夹名字为git-repositories
cd $HOME
mkdir git-repositories
cd git-repositories
第二, clone 源码库, 然后进入uhd文件夹.
git clone https://github.com/EttusResearch/uhd
cd uhd
第三, 切换 UHD 版本 3.15.1.1.
git checkout v3.15.1.1
第四，新建文件夹
cd host
mkdir build
cd build
第五, 创建make文件.
cmake ../
第六, 运行 make去编译 UHD.-j8表示用8个CPU核心编译，加快速度，如果是四核的CPU可以用-j4或者不用
make -j8
第七，运行基本测试，以验证构建过程是否正确完成。
make test
第八, 安装 UHD, using the default install prefix, which will install UHD under the /usr/local/lib folder. You need to run this as root due to the permissions on that folder.
sudo make install
Next, update the system’s shared library cache.
sudo ldconfig
Finally, make sure that the LD_LIBRARY_PATH environment variable is defined, and includes the folder in which UHD was installed. Usually you can add the line below to the end of your $HOME/.bashrc file:
export LD_LIBRARY_PATH=/usr/local/lib
If the LD_LIBRARY_PATH environment variable is already defined with other folders in your $HOME/.bashrc file, then add the line below to the end of your $HOME/.bashrc file to preserve your current settings.
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
For this change to take effect, you will need to close the current terminal window, and open a new terminal window.
At this point, UHD should be installed and ready to use. Verify this by running uhd_find_devices. You should see something similar to the following.
[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501; UHD_3.15.0.0-0-unknown
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
serial: 31BAF1F
addr: 192.168.10.2
claimed: False
mgmt_addr: 192.168.10.2
mgmt_addr: 192.168.20.2
product: n310
type: n3xx
Now that UHD has been installed, we need to download the USRP FPGA images from the Ettus Research website. To do this, run the command listed below. The FPGA image files will be stored in the /usr/local/share/uhd/images folder.
sudo uhd_images_downloader
Next, we need to write the “HG” FPGA image to the USRP N310.
uhd_image_loader --args "type=n3xx,addr=192.168.10.2,fpga=HG"
Do not interrupt the writing program. If there is an interruption, an incomplete FPGA image will be written to flash memory, and the USRP 2974 will be bricked. To unbrick the device, you will need to write the FPGA via JTAG, and then re-write it with the uhd_image_loader utility.
Once the writing program successfully completes, reboot the USRP N310.
Verify that the FPGA image has been correctly written by running the uhd_usrp_probe utility.
UHD requires larger read and write socket buffer sizes than the default values to avoid potential overflows and underruns at high sample rates. A size of 32 MB should be sufficient. To do this, run the command listed below.
sudo sysctl -w net.core.rmem_max=33554432
sudo sysctl -w net.core.wmem_max=33554432
These settings will not persist across a reboot of the system. In order to make these settings permanent, add the following lines into the /etc/sysctl.conf file, as shown below.
net.core.rmem_max=33554432
net.core.wmem_max=33554432
Next, increase the system stack size limit, with the command below.
sudo ulimit -s 8192
When UHD spawns a new thread, it may try to boost the thread’s scheduling priority. If setting the new priority fails, then the UHD software prints a warning to the console, as shown below. This warning is harmless; it simply means that the thread will retain a normal or default scheduling priority.
UHD Warning:
Unable to set the thread priority. Performance may be negatively affected.
Please see the general application notes in the manual for instructions.
EnvironmentError: OSError: error in pthread_setschedparam
To address this issue, non-privileged (non-root) users need to be given special permission to change the scheduling priority. This can be enabled by creating a group usrp, adding your username to it, and then appending the line @usrp - rtprio 99 to the file /etc/security/limits.conf.
sudo groupadd usrp
sudo usermod -aG usrp $USER
Then add the line below to end of the file /etc/security/limits.conf:
@usrp - rtprio 99
You must log out and log back into the account for this settings to take effect.
Additional information about this is posted in the UHD User Manual here.
gNB搭建
基础文件下载
sudo apt-get update
sudo git clone https://gitlab.eurecom.fr/oai/openairinterface5g.git
切换到develop分支
cd ~/openairinterface5g
sudo git checkout develop
source oaienv
cd cmake_targets
第一、安装依赖：仅限于电脑之前从未安装过OAI，如果安装过就不需要了。可以采用build_oai -h 查看相关参数的说明（这一步需要较长时间）
sudo ./build_oai -I
第二、编译:使用USRP这里一定需要加-w USRP
sudo ./build_oai -w USRP --gNB --nrUE
显示如下：
sdr@sdr-eNB1:~/openairinterface5g/cmake_targets$ sudo ./build_oai -x -w USRP --gNB
[sudo] sdr 的密码：
Will generate the software oscilloscope features
Setting hardware to: OAI_USRP
Will compile gNB
CMAKE_CMD=cmake ..
No transport protocol has been selected (TP set to None)
RF HW set to OAI_USRP
Flags for Deadline scheduler: False
Flags for CPU Affinity: False
2. Setting the OAI PATHS ...
OPENAIR_DIR = /home/sdr/openairinterface5g
FreeDiameter prefix not found, install freeDiameter if EPC, HSS
3. building the compilation directives ...
-- The C compiler identification is GNU 7.5.0
-- The CXX compiler identification is GNU 7.5.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CUDA_TOOLKIT_ROOT_DIR not found or specified
-- Could NOT find CUDA (missing: CUDA_TOOLKIT_ROOT_DIR CUDA_NVCC_EXECUTABLE CUDA_INCLUDE_DIRS CUDA_CUDART_LIBRARY)
No CUDA tool installed
CMAKE_BUILD_TYPE is RelWithDebInfo
Architecture is x86_64
C_FLAGS_PROCESSOR is -mavx2 -msse4.1 -mssse3
-- Found Git: /usr/bin/git (found version "2.17.1")
git found: /usr/bin/git
Generated /home/sdr/openairinterface5g/cmake_targets/ran_build/build/CMakeFiles/RRC_Rel15/Makefile.am.libasncodec
Generated LTE_asn_constant.h
Generated /home/sdr/openairinterface5g/cmake_targets/ran_build/build/CMakeFiles/RRC_NR_Rel15/Makefile.am.libasncodec
Generated NR_asn_constant.h
WARNING: Parameterized type BeamFailureRecoveryConfig expected for BeamFailureRecoveryConfig at line 1460 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type CG-UCI-OnPUSCH expected for CG-UCI-OnPUSCH at line 1700 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type ConfiguredGrantConfig expected for ConfiguredGrantConfig at line 1458 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type CSI-AperiodicTriggerStateList expected for CSI-AperiodicTriggerStateList at line 1896 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type CSI-MeasConfig expected for CSI-MeasConfig at line 4469 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type CSI-RS-ResourceConfigMobility expected for CSI-RS-ResourceConfigMobility at line 2631 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type CSI-SemiPersistentOnPUSCH-TriggerStateList expected for CSI-SemiPersistentOnPUSCH-TriggerStateList at line 1897 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type DataInactivityTimer expected for DataInactivityTimer at line 2474 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type DMRS-DownlinkConfig expected for DMRS-DownlinkConfig at line 3082 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type DMRS-UplinkConfig expected for DMRS-UplinkConfig at line 3460 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type DownlinkPreemption expected for DownlinkPreemption at line 2957 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type DRX-Config expected for DRX-Config at line 2465 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type GapConfig expected for GapConfig at line 2510 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type LocationMeasurementInfo expected for LocationMeasurementInfo at line 260 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type MeasGapSharingScheme expected for MeasGapSharingScheme at line 2535 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type MRDC-SecondaryCellGroupConfig expected for MRDC-SecondaryCellGroupConfig at line 430 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type OverheatingAssistanceConfig expected for OverheatingAssistanceConfig at line 6576 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PDCCH-BlindDetection expected for PDCCH-BlindDetection at line 3212 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PDCCH-ConfigCommon expected for PDCCH-ConfigCommon at line 1410 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PDCCH-Config expected for PDCCH-Config at line 1419 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PDCCH-ServingCellConfig expected for PDCCH-ServingCellConfig at line 4467 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PDSCH-CodeBlockGroupTransmission expected for PDSCH-CodeBlockGroupTransmission at line 3142 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PDSCH-ConfigCommon expected for PDSCH-ConfigCommon at line 1411 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PDSCH-Config expected for PDSCH-Config at line 1420 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PDSCH-ServingCellConfig expected for PDSCH-ServingCellConfig at line 4468 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PDSCH-TimeDomainResourceAllocationList expected for PDSCH-TimeDomainResourceAllocationList at line 3089 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PHR-Config expected for PHR-Config at line 2469 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PTRS-DownlinkConfig expected for PTRS-DownlinkConfig at line 2192 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PTRS-UplinkConfig expected for PTRS-UplinkConfig at line 2202 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PUCCH-ConfigCommon expected for PUCCH-ConfigCommon at line 1448 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PUCCH-Config expected for PUCCH-Config at line 1456 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PUCCH-FormatConfig expected for PUCCH-FormatConfig at line 3288 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PUCCH-TPC-CommandConfig expected for PUCCH-TPC-CommandConfig at line 2959 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PUSCH-CodeBlockGroupTransmission expected for PUSCH-CodeBlockGroupTransmission at line 3563 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PUSCH-ConfigCommon expected for PUSCH-ConfigCommon at line 1447 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PUSCH-Config expected for PUSCH-Config at line 1457 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PUSCH-ServingCellConfig expected for PUSCH-ServingCellConfig at line 4492 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PUSCH-TimeDomainResourceAllocationList expected for PUSCH-TimeDomainResourceAllocationList at line 3468 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type PUSCH-TPC-CommandConfig expected for PUSCH-TPC-CommandConfig at line 2958 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type RACH-ConfigCommon expected for RACH-ConfigCommon at line 1446 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type RadioLinkMonitoringConfig expected for RadioLinkMonitoringConfig at line 1422 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type RateMatchPatternLTE-CRS expected for RateMatchPatternLTE-CRS at line 4480 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type RLF-TimersAndConstants expected for RLF-TimersAndConstants at line 1533 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type RNTI-Value expected for RNTI-Value at line 3202 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type SlotFormatIndicator expected for SlotFormatIndicator at line 3003 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type SPS-Config expected for SPS-Config at line 1421 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type SRS-CarrierSwitching expected for SRS-CarrierSwitching at line 4493 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type SRS-Config expected for SRS-Config at line 1459 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type SRS-TPC-CommandConfig expected for SRS-TPC-CommandConfig at line 2960 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type SSB-ToMeasure expected for SSB-ToMeasure at line 2636 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type UCI-OnPUSCH expected for UCI-OnPUSCH at line 3477 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
WARNING: Parameterized type ZP-CSI-RS-ResourceSet expected for ZP-CSI-RS-ResourceSet at line 3121 in /home/sdr/openairinterface5g/openair2/RRC/NR/MESSAGES/asn1c/ASN1_files/nr-rrc-15.6.0.asn1
Generated /home/sdr/openairinterface5g/cmake_targets/ran_build/build/CMakeFiles/S1AP_R15/Makefile.am.libasncodec
Generated S1AP_asn_constant.h
WARNING: Parameterized type maxnoofE-RABs expected for maxnoofE-RABs at line 1197 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type maxPrivateIEs expected for maxPrivateIEs at line 7342 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type maxProtocolExtensions expected for maxProtocolExtensions at line 7326 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type maxProtocolIEs expected for maxProtocolIEs at line 7275 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type S1AP-PRIVATE-IES expected for S1AP-PRIVATE-IES at line 7346 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type S1AP-PRIVATE-IES expected for S1AP-PRIVATE-IES at line 7347 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type S1AP-PRIVATE-IES expected for S1AP-PRIVATE-IES at line 7348 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type S1AP-PROTOCOL-EXTENSION expected for S1AP-PROTOCOL-EXTENSION at line 7330 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type S1AP-PROTOCOL-EXTENSION expected for S1AP-PROTOCOL-EXTENSION at line 7331 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type S1AP-PROTOCOL-EXTENSION expected for S1AP-PROTOCOL-EXTENSION at line 7332 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type S1AP-PROTOCOL-IES expected for S1AP-PROTOCOL-IES at line 7282 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type S1AP-PROTOCOL-IES expected for S1AP-PROTOCOL-IES at line 7283 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
WARNING: Parameterized type S1AP-PROTOCOL-IES expected for S1AP-PROTOCOL-IES at line 7284 in /home/sdr/openairinterface5g/openair3/S1AP/MESSAGES/ASN1/R15/s1ap-15.6.0.asn1
Generated /home/sdr/openairinterface5g/cmake_targets/ran_build/build/CMakeFiles/M2AP_R14/Makefile.am.libasncodec
Generated M2AP_asn_constant.h
WARNING: Parameterized type M2AP-PRIVATE-IES expected for M2AP-PRIVATE-IES at line 1890 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type M2AP-PRIVATE-IES expected for M2AP-PRIVATE-IES at line 1891 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type M2AP-PRIVATE-IES expected for M2AP-PRIVATE-IES at line 1892 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type M2AP-PROTOCOL-EXTENSION expected for M2AP-PROTOCOL-EXTENSION at line 1874 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type M2AP-PROTOCOL-EXTENSION expected for M2AP-PROTOCOL-EXTENSION at line 1875 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type M2AP-PROTOCOL-EXTENSION expected for M2AP-PROTOCOL-EXTENSION at line 1876 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type M2AP-PROTOCOL-IES expected for M2AP-PROTOCOL-IES at line 1826 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type M2AP-PROTOCOL-IES expected for M2AP-PROTOCOL-IES at line 1827 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type M2AP-PROTOCOL-IES expected for M2AP-PROTOCOL-IES at line 1828 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type maxPrivateIEs expected for maxPrivateIEs at line 1886 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type maxProtocolExtensions expected for maxProtocolExtensions at line 1870 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
WARNING: Parameterized type maxProtocolIEs expected for maxProtocolIEs at line 1819 in /home/sdr/openairinterface5g/openair2/M2AP/MESSAGES/ASN1/R14/m2ap-14.0.0.asn1
Generated /home/sdr/openairinterface5g/cmake_targets/ran_build/build/CMakeFiles/M3AP_R14/Makefile.am.libasncodec
Generated M3AP_asn_constant.h
WARNING: Parameterized type M3AP-PRIVATE-IES expected for M3AP-PRIVATE-IES at line 1060 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type M3AP-PRIVATE-IES expected for M3AP-PRIVATE-IES at line 1061 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type M3AP-PRIVATE-IES expected for M3AP-PRIVATE-IES at line 1062 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type M3AP-PROTOCOL-EXTENSION expected for M3AP-PROTOCOL-EXTENSION at line 1047 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type M3AP-PROTOCOL-EXTENSION expected for M3AP-PROTOCOL-EXTENSION at line 1048 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type M3AP-PROTOCOL-EXTENSION expected for M3AP-PROTOCOL-EXTENSION at line 1049 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type M3AP-PROTOCOL-IES expected for M3AP-PROTOCOL-IES at line 1008 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type M3AP-PROTOCOL-IES expected for M3AP-PROTOCOL-IES at line 1009 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type M3AP-PROTOCOL-IES expected for M3AP-PROTOCOL-IES at line 1010 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type maxPrivateIEs expected for maxPrivateIEs at line 1057 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type maxProtocolExtensions expected for maxProtocolExtensions at line 1044 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
WARNING: Parameterized type maxProtocolIEs expected for maxProtocolIEs at line 1003 in /home/sdr/openairinterface5g/openair3/M3AP/MESSAGES/ASN1/R14/m3ap-14.0.0.asn1
Generated /home/sdr/openairinterface5g/cmake_targets/ran_build/build/CMakeFiles/X2AP_R15/Makefile.am.libasncodec
Generated X2AP_asn_constant.h
WARNING: Parameterized type maxPrivateIEs expected for maxPrivateIEs at line 8436 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type maxProtocolExtensions expected for maxProtocolExtensions at line 8420 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type maxProtocolIEs expected for maxProtocolIEs at line 8369 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type X2AP-PRIVATE-IES expected for X2AP-PRIVATE-IES at line 8440 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type X2AP-PRIVATE-IES expected for X2AP-PRIVATE-IES at line 8441 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type X2AP-PRIVATE-IES expected for X2AP-PRIVATE-IES at line 8442 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type X2AP-PROTOCOL-EXTENSION expected for X2AP-PROTOCOL-EXTENSION at line 8424 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type X2AP-PROTOCOL-EXTENSION expected for X2AP-PROTOCOL-EXTENSION at line 8425 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type X2AP-PROTOCOL-EXTENSION expected for X2AP-PROTOCOL-EXTENSION at line 8426 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type X2AP-PROTOCOL-IES expected for X2AP-PROTOCOL-IES at line 8376 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type X2AP-PROTOCOL-IES expected for X2AP-PROTOCOL-IES at line 8377 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
WARNING: Parameterized type X2AP-PROTOCOL-IES expected for X2AP-PROTOCOL-IES at line 8378 in /home/sdr/openairinterface5g/openair2/X2AP/MESSAGES/ASN1/R15/x2ap-15.6.0.asn1
calling ASN1C_PREFIX=F1AP_ asn1c -gen-PER -no-gen-OER -fcompound-names -no-gen-example -findirect-choice -fno-include-deps -D /home/sdr/openairinterface5g/cmake_targets/ran_build/build/CMakeFiles/F1AP_R15.2.1 /home/sdr/openairinterface5g/openair2/F1AP/MESSAGES/ASN1/R15.2.1/F1AP-CommonDataTypes.asn;/home/sdr/openairinterface5g/openair2/F1AP/MESSAGES/ASN1/R15.2.1/F1AP-Constants.asn;/home/sdr/openairinterface5g/openair2/F1AP/MESSAGES/ASN1/R15.2.1/F1AP-PDU-Descriptions.asn;/home/sdr/openairinterface5g/openair2/F1AP/MESSAGES/ASN1/R15.2.1/F1AP-PDU-Contents.asn;/home/sdr/openairinterface5g/openair2/F1AP/MESSAGES/ASN1/R15.2.1/F1AP-IEs.asn;/home/sdr/openairinterface5g/openair2/F1AP/MESSAGES/ASN1/R15.2.1/F1AP-Containers.asn
DEADLINE_SCHEDULER flag is False
CPU_Affinity flag is False
-- Found Yaml: /usr/lib/x86_64-linux-gnu/libyaml.so
calling protoc_call=/home/sdr/openairinterface5g/cmake_targets/tools/generate_protobuf FSPT_C_DIR=/home/sdr/openairinterface5g/cmake_targets/ran_build/build/CMakeFiles/FSPT_V2 FSPT_MSG_DIR=/home/sdr/openairinterface5g/targets/COMMON/MESSAGES/V2 FSPT_MSG_FILES=/home/sdr/openairinterface5g/targets/COMMON/MESSAGES/V2/flexsplit.proto
[libprotobuf WARNING google/protobuf/compiler/parser.cc:546] No syntax specified for the proto file: flexsplit.proto. Please use 'syntax = "proto2";' or 'syntax = "proto3";' to specify a syntax version. (Defaulted to proto2 syntax.)
fspt c dir is : /home/sdr/openairinterface5g/cmake_targets/ran_build/build/CMakeFiles/FSPT_V2
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.1")
-- Checking for one of the modules 'libxml-2.0'
-- Checking for one of the modules 'libxslt'
-- Checking for one of the modules 'openssl'
-- Checking for one of the modules 'libconfig'
-- Checking for one of the modules 'libcrypto'
-- Boost version: 1.65.1
-- Checking for one of the modules 'openpgm-5.1;openpgm-5.2'
-- Checking for one of the modules 'nettle'
NETTLE VERSION_INSTALLED = 3.4
NETTLE_VERSION_MAJOR = 3
NETTLE_VERSION_MINOR = 4
-- Checking for one of the modules 'xpm'
Add enb specific telnet functions in libtelnetsrv_enb.so
No specific telnet functions for gnb
No specific telnet functions for 4gUE
No specific telnet functions for 5gUE
-- Configuring done
-- Generating done
-- Build files have been written to: /home/sdr/openairinterface5g/cmake_targets/ran_build/build
Compiling nr-softmodem...
Log file for compilation is being written to: /home/sdr/openairinterface5g/cmake_targets/log/nr-softmodem.Rel15.txt
nr-softmodem compiled
WARNING: 1 warnings. See /home/sdr/openairinterface5g/cmake_targets/log/nr-softmodem.Rel15.txt
Building shared libraries common to UE and gNB
Log file for compilation is being written to: /home/sdr/openairinterface5g/cmake_targets/log/params_libconfig.Rel15.txt
params_libconfig compiled
Log file for compilation is being written to: /home/sdr/openairinterface5g/cmake_targets/log/coding.Rel15.txt
coding compiled
Log file for compilation is being written to: /home/sdr/openairinterface5g/cmake_targets/log/nasmesh.Rel15.txt
nasmesh compiled
WARNING: 1 warnings. See /home/sdr/openairinterface5g/cmake_targets/log/nasmesh.Rel15.txt
Log file for compilation is being written to: /home/sdr/openairinterface5g/cmake_targets/log/rb_tool.Rel15.txt
rb_tool compiled
Log file for compilation is being written to: /home/sdr/openairinterface5g/cmake_targets/log/oai_usrpdevif.Rel15.txt
oai_usrpdevif compiled
liboai_device.so is linked to USRP device library
Compiling rfsimulator
Log file for compilation is being written to: /home/sdr/openairinterface5g/cmake_targets/log/rfsimulator.Rel15.txt
rfsimulator compiled
WARNING: 1 warnings. See /home/sdr/openairinterface5g/cmake_targets/log/rfsimulator.Rel15.txt
Compiling tcp_bridge_oai
Log file for compilation is being written to: /home/sdr/openairinterface5g/cmake_targets/log/tcp_bridge_oai.Rel15.txt
tcp_bridge_oai compiled
Building transport protocol libraries
Log file for compilation is being written to: /home/sdr/openairinterface5g/cmake_targets/log/oai_eth_transpro.Rel15.txt
oai_eth_transpro compiled
liboai_transpro.so is linked to ETHERNET transport
10. Bypassing the Tests ...
BUILD SHOULD BE SUCCESSFUL
修改配置文件：修改 ~/openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF/ 下n310配置文件gnb.band78.tm1.106PRB.usrpn300.conf的内容。电脑通过网线连接了网络，IP地址为192.168.0.9
sudo vim ~/openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.0.9/24";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.0.9/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
...
...
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
eNB_instances = [0];
sdr_addrs = "addr=192.168.20.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2";
clock_src = "external";
}
);
运行
sudo -E ./nr-softmodem --noS1 -O ~/openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf -d
sdr@sdr-eNB1:~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./nr-softmodem -O ~/openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf
[CONFIG] get parameters from libconfig /home/sdr/openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf , debug flags: 0x00000000
[CONFIG] function config_libconfig_init returned 0
[CONFIG] config module libconfig loaded
[LIBCONFIG] config: 1/1 parameters successfully set, (1 to default value)
Send signal 35 to display resource usage...
[LIBCONFIG] log_config: 3/3 parameters successfully set, (1 to default value)
[LIBCONFIG] log_config: 52/52 parameters successfully set, (46 to default value)
[LIBCONFIG] log_config: 52/52 parameters successfully set, (52 to default value)
[LIBCONFIG] log_config: 15/15 parameters successfully set, (15 to default value)
[LIBCONFIG] log_config: 15/15 parameters successfully set, (15 to default value)
log init done
[HW] # /dev/cpu_dma_latency set to 10 us
Reading in command-line options
[GNB_APP] Getting GNBSParams
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] THREAD_STRUCT.[0]: 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] THREAD_STRUCT.[0]: 2/2 parameters successfully set, (0 to default value)
[CONFIG] parallel_conf is set to 2
[CONFIG] worker_conf is set to 1
Configuration: nb_rrc_inst 1, nb_nr_L1_inst 1, nb_ru 1
[LIBCONFIG] (root): 23/23 parameters successfully set, (19 to default value)
[LIBCONFIG] (root): 5/5 parameters successfully set, (4 to default value)
[LIBCONFIG] TTracer: 4/4 parameters successfully set, (4 to default value)
configuring for RAU/RRU
CPU Freq is 3.600326
[TMR] Starting itti queue: TASK_UNKNOWN as task 0
[TMR] Starting itti queue: TASK_TIMER as task 1
[TMR] Starting itti queue: TASK_L2L1 as task 2
[TMR] Starting itti queue: TASK_BM as task 3
[TMR] Starting itti queue: TASK_PHY_ENB as task 4
[TMR] Starting itti queue: TASK_MAC_ENB as task 5
[TMR] Starting itti queue: TASK_RLC_ENB as task 6
[TMR] Starting itti queue: TASK_RRC_ENB_NB_IoT as task 7
[TMR] Starting itti queue: TASK_PDCP_ENB as task 8
[TMR] Starting itti queue: TASK_DATA_FORWARDING as task 9
[TMR] Starting itti queue: TASK_END_MARKER as task 10
[TMR] Starting itti queue: TASK_RRC_ENB as task 11
[TMR] Starting itti queue: TASK_RRC_GNB as task 12
[TMR] Starting itti queue: TASK_RAL_ENB as task 13
[TMR] Starting itti queue: TASK_S1AP as task 14
[TMR] Starting itti queue: TASK_X2AP as task 15
[TMR] Starting itti queue: TASK_M2AP_ENB as task 16
[TMR] Starting itti queue: TASK_M2AP_MCE as task 17
[TMR] Starting itti queue: TASK_M3AP as task 18
[TMR] Starting itti queue: TASK_M3AP_MME as task 19
[TMR] Starting itti queue: TASK_M3AP_MCE as task 20
[TMR] Starting itti queue: TASK_SCTP as task 21
[TMR] Starting itti queue: TASK_ENB_APP as task 22
[TMR] Starting itti queue: TASK_GNB_APP as task 23
[TMR] Starting itti queue: TASK_MCE_APP as task 24
[TMR] Starting itti queue: TASK_MME_APP as task 25
[TMR] Starting itti queue: TASK_FLEXRAN_AGENT as task 26
[TMR] Starting itti queue: TASK_PHY_UE as task 27
[TMR] Starting itti queue: TASK_MAC_UE as task 28
[TMR] Starting itti queue: TASK_RLC_UE as task 29
[TMR] Starting itti queue: TASK_PDCP_UE as task 30
[TMR] Starting itti queue: TASK_RRC_UE as task 31
[TMR] Starting itti queue: TASK_NAS_UE as task 32
[TMR] Starting itti queue: TASK_RAL_UE as task 33
[TMR] Starting itti queue: TASK_MSC as task 34
[TMR] Starting itti queue: TASK_GTPV1_U as task 35
[TMR] Starting itti queue: TASK_UDP as task 36
[TMR] Starting itti queue: TASK_CU_F1 as task 37
[TMR] Starting itti queue: TASK_DU_F1 as task 38
[LIBCONFIG] opt: 3/3 parameters successfully set, (3 to default value)
[OPT] OPT disabled
[NETLINK] Error opening socket -1 (93:Protocol not supported)
[NETLINK] Opened socket with fd -1
[NETLINK] Error fcntl (9:Bad file descriptor)
[HW] Version: Branch: develop Abrev. Hash: 2bf575841 Date: Fri Jul 10 16:49:26 2020 +0200
Wait for the ITTI initialize message
[TMR] Created Posix thread TASK_L2L1
[SCTP] Starting SCTP layer
[TMR] Created Posix thread TASK_SCTP
[LIBCONFIG] eNBs.[0]: 1/1 parameters successfully set, (1 to default value)
[LIBCONFIG] gNBs.[0]: 1/1 parameters successfully set, (1 to default value)
[X2AP] X2AP is disabled.
[UDP] Initializing UDP task interface
[UDP] Initializing UDP task interface: DONE
[TMR] Created Posix thread TASK_UDP
[TMR] Created Posix thread TASK_GTPV1_U
[PHY] gNB_app_task() Task ready initialize structures
[TMR] Created Posix thread TASK_GNB_APP
[NR_RRC] Creating NR RRC gNB Task
[GTPV1U] Initializing GTPU stack 0x562004f8f4b0
[NR_PHY] RC.gNB = 0x7fef8c000b20
[LIBCONFIG] L1s.[0]: 24/24 parameters successfully set, (22 to default value)
[NR_RRC] Entering main loop of NR_RRC message task
[TMR] Created Posix thread TASK_RRC_GNB
[NR_PHY] RC.gNB[0] = 0x7fef9ed5d010
Initializing northbound interface for L1
[PHY] l1_north_init_gNB() RC.nb_nr_L1_inst:1
[PHY] Installing callbacks for IF_Module - UL_indication
[MAC] Allocating shared L1/L2 interface structure for instance 0 @ 0x7fef8c001c40
[PHY] l1_north_init_gNB() RC.gNB[0] installing callbacks
[LIBCONFIG] MACRLCs.[0]: 20/20 parameters successfully set, (17 to default value)
[MAC] [MAIN] Init function start:nb_nr_macrlc_inst=1
NFAPI MODE:MONOLITHIC
START MAIN THREADS
RC.nb_nr_L1_inst:1
Initializing gNB threads single_thread_flag:1 wait_for_sync:0
[PHY] gNB L1 structure RC.gNB allocated @ 0x7fef8c000b20
[PHY] [lte-softmodem.c] gNB structure RC.gNB[0] allocated @ 0x7fef9ed5d010
[PHY] Initializing gNB 0 single_thread_flag:1
[PHY] Initializing gNB 0
[PHY] Registering with MAC interface module (before 0x7fef8c001c40)
[PHY] Installing callbacks for IF_Module - UL_indication
[PHY] Registering with MAC interface module (after 0x7fef8c001c40)
[PHY] Setting indication lists
[PHY] [nr-softmodem.c] gNB structure allocated
wait_gNBs()
Waiting for gNB L1 instances to all get configured ... sleeping 50ms (nb_nr_sL1_inst 1)
[PDCP] PDCP layer has been initialized
[PHY] Installing callbacks for IF_Module - UL_indication
[PHY] gNB_app_task() RC.nb_nr_L1_inst:1
[PHY] l1_north_init_gNB() RC.nb_nr_L1_inst:1
[PHY] Installing callbacks for IF_Module - UL_indication
[PHY] l1_north_init_gNB() RC.gNB[0] installing callbacks
[GNB_APP] Allocating gNB_RRC_INST for 1 instances
[PHY] gNB_app_task() RC.nb_nr_inst:1 RC.nrrrc:0x7fef8c002dd0
[PHY] gNB_app_task() Creating RRC instance RC.nrrrc[0]:0x7fef8c002df0 (1 of 1)
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] gNBs.[0]: 14/14 parameters successfully set, (8 to default value)
[LIBCONFIG] gNBs.[0].servingCellConfigCommon.[0]: 155/155 parameters successfully set, (83 to default value)
[RRC] Read in ServingCellConfigCommon (PhysCellId 0, ABSFREQSSB 641032, DLBand 78, ABSFREQPOINTA 640000, DLBW 106,RACH_TargetReceivedPower -118
Checking element 15 : 4294967295
removing pdsch_TimeDomainAllocationList element 15
List size now 15
Checking element 14 : 4294967295
removing pdsch_TimeDomainAllocationList element 14
List size now 14
Checking element 13 : 4294967295
removing pdsch_TimeDomainAllocationList element 13
List size now 13
Checking element 12 : 4294967295
removing pdsch_TimeDomainAllocationList element 12
List size now 12
Checking element 11 : 4294967295
removing pdsch_TimeDomainAllocationList element 11
List size now 11
Checking element 10 : 4294967295
removing pdsch_TimeDomainAllocationList element 10
List size now 10
Checking element 9 : 4294967295
removing pdsch_TimeDomainAllocationList element 9
List size now 9
Checking element 8 : 4294967295
removing pdsch_TimeDomainAllocationList element 8
List size now 8
Checking element 7 : 4294967295
removing pdsch_TimeDomainAllocationList element 7
List size now 7
Checking element 6 : 4294967295
removing pdsch_TimeDomainAllocationList element 6
List size now 6
Checking element 5 : 4294967295
removing pdsch_TimeDomainAllocationList element 5
List size now 5
Checking element 4 : 4294967295
removing pdsch_TimeDomainAllocationList element 4
List size now 4
Checking element 3 : 0
Checking element 2 : 0
Checking element 1 : 0
Checking element 0 : 0
NRRRC 0: Southbound Transport local_mac
[LIBCONFIG] gNBs.[0].plmn_list.[0]: 3/3 parameters successfully set, (0 to default value)
SSB SCO 31
pdsch_AntennaPorts 1
[GNB_APP] Sending configuration message to NR_RRC task
[GTPV1U] Configuring GTPu
[NR_RRC] Received message NRRRC_CONFIGURATION_REQ
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[NR_RRC] [gNB 0] Received NRRRC_CONFIGURATION_REQ : 0x7fef8c0043a0
[LIBCONFIG] gNBs.[0].NETWORK_INTERFACES: 3/3 parameters successfully set, (0 to default value)
[NR_RRC] [FRAME 00000][eNB][MOD 00][RNTI 0] Init...
[GTPV1U] Configuring GTPu address : 192.168.0.9 -> 900a8c0
[GNB_APP] [gNB 0] gNB_app_register for instance 0
[GTPV1U] Tx UDP_INIT IP addr 192.168.0.9 (868)
[UDP] Initializing UDP for local address 192.168.0.9 with port 2152
[NR_RRC] [FRAME 00000][eNB][MOD 00][RNTI 0] Checking release
[NR_RRC] Done init_NR_SI
[MAC] Configuring common parameters from NR ServingCellConfig
[PHY] config_common() dl_BandwidthP:40
[PHY] Computing dl_frequency (pointA 640000 => 3600000000 (dlmin 3300000, nr_bandtable[27].N_OFFs_DL 620000))
[PHY] config_common() dl_BandwidthP:40
[PHY] Computing dl_frequency (pointA 640000 => 3600000000 (dlmin 3300000, nr_bandtable[27].N_OFFs_DL 620000))
[UDP] Inserting new descriptor for task 35, sd 85
[PHY] Scanning band 1, dl_min 2110000, ul_min 1920000
[PHY] Scanning band 2, dl_min 1930000, ul_min 1850000
[PHY] Scanning band 3, dl_min 1805000, ul_min 1710000
[PHY] Scanning band 5, dl_min 869000, ul_min 824000
[PHY] Scanning band 7, dl_min 2620000, ul_min 2500000
[PHY] Scanning band 8, dl_min 925000, ul_min 880000
[PHY] Scanning band 12, dl_min 728000, ul_min 698000
[PHY] Scanning band 20, dl_min 791000, ul_min 832000
[PHY] Scanning band 25, dl_min 1930000, ul_min 1850000
[PHY] Scanning band 28, dl_min 758000, ul_min 703000
[PHY] Scanning band 34, dl_min 2010000, ul_min 2010000
[PHY] Scanning band 38, dl_min 2570000, ul_min 2570000
[PHY] Scanning band 39, dl_min 1880000, ul_min 1880000
[PHY] Scanning band 40, dl_min 2300000, ul_min 2300000
[PHY] Scanning band 41, dl_min 2496000, ul_min 2496000
[PHY] Scanning band 41, dl_min 2496000, ul_min 2496000
[PHY] Scanning band 50, dl_min 1432000, ul_min 1432000
[PHY] Scanning band 51, dl_min 1427000, ul_min 1427000
[PHY] Scanning band 66, dl_min 2110000, ul_min 1710000
[PHY] Scanning band 70, dl_min 1995000, ul_min 1695000
[PHY] Scanning band 71, dl_min 617000, ul_min 663000
[PHY] Scanning band 74, dl_min 1475000, ul_min 1427000
[PHY] Scanning band 75, dl_min 1432000, ul_min 0
[PHY] Scanning band 76, dl_min 1427000, ul_min 0
[PHY] Scanning band 77, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 77, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 78, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 78, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 79, dl_min 4400000, ul_min 4400000
[PHY] Scanning band 79, dl_min 4400000, ul_min 4400000
[PHY] Scanning band 80, dl_min 0, ul_min 1710000
[PHY] Scanning band 81, dl_min 0, ul_min 860000
[PHY] Scanning band 82, dl_min 0, ul_min 832000
[PHY] Scanning band 83, dl_min 0, ul_min 703000
[PHY] Scanning band 84, dl_min 0, ul_min 1920000
[PHY] Scanning band 86, dl_min 0, ul_min 1710000
[PHY] Scanning band 257, dl_min 26500000, ul_min 26500000
[PHY] Scanning band 257, dl_min 26500000, ul_min 26500000
[PHY] Scanning band 258, dl_min 24250000, ul_min 24250000
[PHY] Scanning band 258, dl_min 24250000, ul_min 24250000
[PHY] Scanning band 260, dl_min 37000000, ul_min 37000000
[PHY] Scanning band 260, dl_min 37000000, ul_min 37000000
[PHY] Scanning band 261, dl_min 27500000, ul_min 27500000
[PHY] Scanning band 261, dl_min 27500000, ul_min 27500000
[PHY] DL frequency 3600000000: band 78, frame_type 1, UL frequency 3600000000
[UDP] Initializing UDP for local address 192.168.0.9 with port 2152: DONE
found_sequences 16
[MAC] Set TX/RX antenna number to 1 (num ssb 1: 80000000,0)
[MAC] Setting TDD configuration period to 6
[PHY] TDD has been properly configurated
[MAC] rrc_mac_config_req_gNB() /home/sdr/openairinterface5g/openair2/LAYER2/NR_MAC_gNB/config.c:345 RC.nrmac[Mod_idP]->if_inst->NR_PHY_config_req:0x562003def380
[PHY] Scanning band 1, dl_min 2110000, ul_min 1920000
[PHY] Scanning band 2, dl_min 1930000, ul_min 1850000
[PHY] Scanning band 3, dl_min 1805000, ul_min 1710000
[PHY] Scanning band 5, dl_min 869000, ul_min 824000
[PHY] Scanning band 7, dl_min 2620000, ul_min 2500000
[PHY] Scanning band 8, dl_min 925000, ul_min 880000
[PHY] Scanning band 12, dl_min 728000, ul_min 698000
[PHY] Scanning band 20, dl_min 791000, ul_min 832000
[PHY] Scanning band 25, dl_min 1930000, ul_min 1850000
[PHY] Scanning band 28, dl_min 758000, ul_min 703000
[PHY] Scanning band 34, dl_min 2010000, ul_min 2010000
[PHY] Scanning band 38, dl_min 2570000, ul_min 2570000
[PHY] Scanning band 39, dl_min 1880000, ul_min 1880000
[PHY] Scanning band 40, dl_min 2300000, ul_min 2300000
[PHY] Scanning band 41, dl_min 2496000, ul_min 2496000
[PHY] Scanning band 41, dl_min 2496000, ul_min 2496000
[PHY] Scanning band 50, dl_min 1432000, ul_min 1432000
[PHY] Scanning band 51, dl_min 1427000, ul_min 1427000
[PHY] Scanning band 66, dl_min 2110000, ul_min 1710000
[PHY] Scanning band 70, dl_min 1995000, ul_min 1695000
[PHY] Scanning band 71, dl_min 617000, ul_min 663000
[PHY] Scanning band 74, dl_min 1475000, ul_min 1427000
[PHY] Scanning band 75, dl_min 1432000, ul_min 0
[PHY] Scanning band 76, dl_min 1427000, ul_min 0
[PHY] Scanning band 77, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 77, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 78, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 78, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 79, dl_min 4400000, ul_min 4400000
[PHY] Scanning band 79, dl_min 4400000, ul_min 4400000
[PHY] Scanning band 80, dl_min 0, ul_min 1710000
[PHY] Scanning band 81, dl_min 0, ul_min 860000
[PHY] Scanning band 82, dl_min 0, ul_min 832000
[PHY] Scanning band 83, dl_min 0, ul_min 703000
[PHY] Scanning band 84, dl_min 0, ul_min 1920000
[PHY] Scanning band 86, dl_min 0, ul_min 1710000
[PHY] Scanning band 257, dl_min 26500000, ul_min 26500000
[PHY] Scanning band 257, dl_min 26500000, ul_min 26500000
[PHY] Scanning band 258, dl_min 24250000, ul_min 24250000
[PHY] Scanning band 258, dl_min 24250000, ul_min 24250000
[PHY] Scanning band 260, dl_min 37000000, ul_min 37000000
[PHY] Scanning band 260, dl_min 37000000, ul_min 37000000
[PHY] Scanning band 261, dl_min 27500000, ul_min 27500000
[PHY] Scanning band 261, dl_min 27500000, ul_min 27500000
[PHY] DL frequency 3619080000: band 78, frame_type 1, UL frequency 3619080000
[PHY] Configuring MIB for instance 0, : (Nid_cell 0,DL freq 3619080000, UL freq 3619080000)
[PHY] Initializing frame parms for mu 1, N_RB 106, Ncp 0
[PHY] gNB 0 configured
[NR_RRC] [FRAME 00000][eNB][MOD 00][RNTI 0] gNB:OPENAIR NR RRC IN....
gNB L1 are configured
About to Init RU threads RC.nb_RU:1
Initializing RU threads
configuring RU from file
[LIBCONFIG] RUs.[0]: 27/27 parameters successfully set, (16 to default value)
Set RU mask to 1
Creating RC.ru[0]:0x562005a46490
Setting function for RU 0 to gNodeB_3GPP
[PHY] number of L1 instances 1, number of RU 1, number of CPU cores 8
[PHY] DJP - delete code above this /home/sdr/openairinterface5g/executables/nr-ru.c:2254
[PHY] Copying frame parms from gNB in RC to gNB 0 in ru 0 and frame_parms in ru
configuring ru_id 0 (start_rf 0x562003d98020)
[PHY] Starting ru_thread 0
[PHY] Initializing RU proc 0 (,synch_to_ext_device),
[PHY] Starting RU 0 (,synch_to_ext_device),
[PHY] Initializing frame parms for mu 1, N_RB 106, Ncp 0
[PHY] fp->scs=30000
[PHY] fp->ofdm_symbol_size=2048
[PHY] fp->nb_prefix_samples0=176
[PHY] fp->nb_prefix_samples=144
[PHY] fp->slots_per_subframe=2
[PHY] fp->samples_per_subframe_wCP=57344
[PHY] fp->samples_per_frame_wCP=573440
[PHY] fp->samples_per_subframe=61440
[PHY] fp->samples_per_frame=614400
[PHY] fp->dl_CarrierFreq=3619080000
[PHY] fp->ul_CarrierFreq=3619080000
channel 0, Setting tx_gain offset 0.000000, rx_gain offset 114.000000, tx_freq 3619080000.000000, rx_freq 3619080000.000000
[PHY] Initializing RU signal buffers (if_south local RF) nb_tx 1
[PHY] init_RU_proc() DJP - added creation of pthread_prach
[PHY] [INIT] common.txdata[0] = 0x7fef980b7040 (2457600 bytes)
[PHY] nb_tx 1
[PHY] init feptx thread 0
[PHY] rxdata_7_5kHz[0] 0x7fef9091a040 for RU 0
[PHY] init feptx thread 1
wait RUs
[PHY] Waiting for RUs to be configured ... RC.ru_mask:01
[PHY] [INIT] common.txdata_BF= 0x7fef7c000b00 (8 bytes)
[PHY] txdataF_BF[0] 0x7fef9ece3040 for RU 0
[PHY] rxdataF[0] 0x7fef98046040 for RU 0
[PHY] [INIT] nr_phy_init_RU() RC.nb_nr_L1_inst:1
[LIBCONFIG] device.recplay: 7/7 parameters successfully set, (7 to default value)
[LIBCONFIG] device: 1/1 parameters successfully set, (1 to default value)
[LIBCONFIG] loader: 2/2 parameters successfully set, (2 to default value)
[LIBCONFIG] loader.oai_device: 2/2 parameters successfully set, (1 to default value)
[LOADER] library liboai_device.so successfully loaded
[HW] UHD version 3.14.1.1-release (3.14.1)
[HW] Checking for USRP with args addr=192.168.10.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.14.1.1-release
[HW] Found USRP n3xx
Found USRP n300
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.10.2,type=n3xx,product=n310,serial=31BAF1F,claimed=False,addr=192.168.10.2,second_addr=192.168.20.2,master_clock_rate=122880000.000000
[INFO] [MPM.main] Launching USRP/MPM, version: 3.14.1.1-g0347a6d8
[INFO] [MPM.main] Spawning RPC process...
[INFO] [MPM.PeriphManager] Device serial number: 31BAF1F
[INFO] [MPM.PeriphManager] Initialized 2 daughterboard(s).
[INFO] [MPM.PeriphManager] init() called with device args `time_source=internal,clock_source=internal'.
[INFO] [MPM.RPCServer] RPC server ready!
[INFO] [MPM.RPCServer] Spawning watchdog task...
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[INFO] [MPM.PeriphManager] init() called with device args `time_source=internal,second_addr=192.168.20.2,clock_source=internal,master_clock_rate=122880000.000000,product=n310,mgmt_addr=192.168.10.2'.
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[ERROR] [MPMD] Failure during block enumeration: AssertionError: Failed to find a valid XML path for RFNoC blocks.
Try setting the enviroment variable UHD_RFNOC_DIR to the correct location
terminate called after throwing an instance of 'uhd::runtime_error'
what(): RuntimeError: Failed to run enumerate_rfnoc_blocks()
Linux signal Aborted...
/home/sdr/openairinterface5g/executables/softmodem-common.c:187 signal_handler() Exiting OAI softmodem: softmodem starting exit procedure
[PHY] ru_thread_prach() RACH waiting for RU to be configured
nr-softmodem: /usr/include/boost/thread/pthread/mutex.hpp:111: boost::mutex::~mutex(): Assertion `!res' failed.
Linux signal Aborted...
/home/sdr/openairinterface5g/executables/softmodem-common.c:187 signal_handler() Exiting OAI softmodem: softmodem starting exit procedure
[PHY] ru_thread_prach() RACH waiting for RU to be configured
注意到上面出现了 GNU C++ version 7.4.0; Boost_106501; UHD_3.14.1.1-release,可能是编译的时候安装了这个版本，所以尝试把这个UHD_3.14.1.1-release删除掉，然后更改build_helper文件，注释掉相关部分。
check_install_usrp_uhd_driver(){
# if [[ "$OS_DISTRO" == "ubuntu" ]]; then
# #first we remove old installation
# $SUDO apt-get remove -y uhd || true
# $SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y || true
# v=$(lsb_release -cs)
# # The new USRP repository
# # Raphael Defosseux: Adding a loop on adding PPA because in CI the gpg key retrieve may
# # timeout due to proxy / network latencies in Eurecom on VM
# echo_info "\nAdding PPA repository ettusresearch/uhd\n"
# x=0
# while [ $x -le 5 ]
# do
# if $SUDO add-apt-repository ppa:ettusresearch/uhd -y
# then
# echo_info "add-apt-repository successful\n"
# break
# else
# echo_info "add-apt-repository failed, retrying...\n"
# sleep 30
# fi
# x=$((x + 1))
# done
$SUDO apt-get update
# $SUDO apt-get -y install python python-tk libboost-all-dev libusb-1.0-0-dev
# $SUDO apt-get -y install libuhd-dev libuhd003 uhd-host
# elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
# $SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
# $SUDO -H pip install requests
# if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
# # until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
# $SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
# install_usrp_uhd_driver_from_source
# else
# $SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
# fi
# fi
}
install_usrp_uhd_driver() {
$SUDO apt-get update
# if [[ "$OS_DISTRO" == "ubuntu" ]]; then
# We move uhd-host apart because it depends on linux kernel version
# On newer kernels, it fails to install
# $SUDO apt-get -y install uhd-host
# fi
# quick workaround for RHE7.6
# local distribution=$(get_distribution_release)
# if [ -z $1 ]; then
# if [[ "$OS_DISTRO" == "rhel" ]]; then
# $SUDO /usr/local/bin/uhd_images_downloader
# else
# $SUDO uhd_images_downloader
# fi
# else
# if [[ "$OS_DISTRO" == "rhel" ]]; then
# $SUDO /usr/local/bin/uhd_images_downloader -i $1
# else
# $SUDO uhd_images_downloader -i $1
# fi
# fi
}
重新编译
sdr@sdr-eNB1:~/openairinterface5g/cmake_targets$./build_oai -c -C -I -w USRP --gNB
运行
sdr@sdr-eNB1:~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./nr-softmodem -O ~/openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --noS1
sdr@sdr-eNB1:~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./nr-softmodem -O ~/openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --noS1
[CONFIG] get parameters from libconfig /home/sdr/openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf , debug flags: 0x00000000
[CONFIG] function config_libconfig_init returned 0
[CONFIG] config module libconfig loaded
[LIBCONFIG] config: 1/1 parameters successfully set, (1 to default value)
Send signal 35 to display resource usage...
[LIBCONFIG] log_config: 3/3 parameters successfully set, (1 to default value)
[LIBCONFIG] log_config: 52/52 parameters successfully set, (46 to default value)
[LIBCONFIG] log_config: 52/52 parameters successfully set, (52 to default value)
[LIBCONFIG] log_config: 15/15 parameters successfully set, (15 to default value)
[LIBCONFIG] log_config: 15/15 parameters successfully set, (15 to default value)
log init done
[HW] # /dev/cpu_dma_latency set to 10 us
Reading in command-line options
[GNB_APP] Getting GNBSParams
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] THREAD_STRUCT.[0]: 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] THREAD_STRUCT.[0]: 2/2 parameters successfully set, (0 to default value)
[CONFIG] parallel_conf is set to 2
[CONFIG] worker_conf is set to 1
Configuration: nb_rrc_inst 1, nb_nr_L1_inst 1, nb_ru 1
[LIBCONFIG] (root): 23/23 parameters successfully set, (19 to default value)
[LIBCONFIG] (root): 5/5 parameters successfully set, (4 to default value)
[LIBCONFIG] TTracer: 4/4 parameters successfully set, (4 to default value)
configuring for RAU/RRU
CPU Freq is 3.600363
[TMR] Starting itti queue: TASK_UNKNOWN as task 0
[TMR] Starting itti queue: TASK_TIMER as task 1
[TMR] Starting itti queue: TASK_L2L1 as task 2
[TMR] Starting itti queue: TASK_BM as task 3
[TMR] Starting itti queue: TASK_PHY_ENB as task 4
[TMR] Starting itti queue: TASK_MAC_ENB as task 5
[TMR] Starting itti queue: TASK_RLC_ENB as task 6
[TMR] Starting itti queue: TASK_RRC_ENB_NB_IoT as task 7
[TMR] Starting itti queue: TASK_PDCP_ENB as task 8
[TMR] Starting itti queue: TASK_DATA_FORWARDING as task 9
[TMR] Starting itti queue: TASK_END_MARKER as task 10
[TMR] Starting itti queue: TASK_RRC_ENB as task 11
[TMR] Starting itti queue: TASK_RRC_GNB as task 12
[TMR] Starting itti queue: TASK_RAL_ENB as task 13
[TMR] Starting itti queue: TASK_S1AP as task 14
[TMR] Starting itti queue: TASK_X2AP as task 15
[TMR] Starting itti queue: TASK_M2AP_ENB as task 16
[TMR] Starting itti queue: TASK_M2AP_MCE as task 17
[TMR] Starting itti queue: TASK_M3AP as task 18
[TMR] Starting itti queue: TASK_M3AP_MME as task 19
[TMR] Starting itti queue: TASK_M3AP_MCE as task 20
[TMR] Starting itti queue: TASK_SCTP as task 21
[TMR] Starting itti queue: TASK_ENB_APP as task 22
[TMR] Starting itti queue: TASK_GNB_APP as task 23
[TMR] Starting itti queue: TASK_MCE_APP as task 24
[TMR] Starting itti queue: TASK_MME_APP as task 25
[TMR] Starting itti queue: TASK_FLEXRAN_AGENT as task 26
[TMR] Starting itti queue: TASK_PHY_UE as task 27
[TMR] Starting itti queue: TASK_MAC_UE as task 28
[TMR] Starting itti queue: TASK_RLC_UE as task 29
[TMR] Starting itti queue: TASK_PDCP_UE as task 30
[TMR] Starting itti queue: TASK_RRC_UE as task 31
[TMR] Starting itti queue: TASK_NAS_UE as task 32
[TMR] Starting itti queue: TASK_RAL_UE as task 33
[TMR] Starting itti queue: TASK_MSC as task 34
[TMR] Starting itti queue: TASK_GTPV1_U as task 35
[TMR] Starting itti queue: TASK_UDP as task 36
[TMR] Starting itti queue: TASK_CU_F1 as task 37
[TMR] Starting itti queue: TASK_DU_F1 as task 38
[LIBCONFIG] opt: 3/3 parameters successfully set, (3 to default value)
[OPT] OPT disabled
[HW] Version: Branch: develop Abrev. Hash: 2bf575841 Date: Fri Jul 10 16:49:26 2020 +0200
[PDCP] PDCP layer has been initialized
IS_SOFTMODEM_NOS1 option enabled
[PDCP] pdcp init, usenetlink
[LIBCONFIG] nas.noS1: 3/3 parameters successfully set, (3 to default value)
[NETLINK]Opened socket oaitun_enb1 with fd nas_sock_fd[0]=85
[OIP] Interface oaitun_enb1 successfully configured, ip address 10.0.1.1, mask 255.255.255.0 broadcast address 10.0.1.255
[PDCP] ENB pdcp will use tun interface
Wait for the ITTI initialize message
[TMR] Created Posix thread TASK_L2L1
[SCTP] Starting SCTP layer
[TMR] Created Posix thread TASK_SCTP
[LIBCONFIG] eNBs.[0]: 1/1 parameters successfully set, (1 to default value)
[LIBCONFIG] gNBs.[0]: 1/1 parameters successfully set, (1 to default value)
[X2AP] X2AP is disabled.
[PHY] gNB_app_task() Task ready initialize structures
[NR_PHY] RC.gNB = 0x7f8404000b20
[LIBCONFIG] L1s.[0]: 24/24 parameters successfully set, (22 to default value)
[NR_PHY] RC.gNB[0] = 0x7f840d5ce010
Initializing northbound interface for L1
[PHY] l1_north_init_gNB() RC.nb_nr_L1_inst:1
[PHY] Installing callbacks for IF_Module - UL_indication
[MAC] Allocating shared L1/L2 interface structure for instance 0 @ 0x7f8404001c40
[PHY] l1_north_init_gNB() RC.gNB[0] installing callbacks
[LIBCONFIG] MACRLCs.[0]: 20/20 parameters successfully set, (17 to default value)
[MAC] [MAIN] Init function start:nb_nr_macrlc_inst=1
[PDCP] PDCP layer has been initialized
add new uid is 0 1234
[PDCP] [FRAME 00000][eNB][MOD 00][RNTI 1234][DRB 01] Action ADD LCID 4 (DRB id 1) configured with SN size 12 bits and RLC UM
[PHY] Installing callbacks for IF_Module - UL_indication
[PHY] gNB_app_task() RC.nb_nr_L1_inst:1
[PHY] l1_north_init_gNB() RC.nb_nr_L1_inst:1
[PHY] Installing callbacks for IF_Module - UL_indication
[PHY] l1_north_init_gNB() RC.gNB[0] installing callbacks
[GNB_APP] Allocating gNB_RRC_INST for 1 instances
[PHY] gNB_app_task() RC.nb_nr_inst:1 RC.nrrrc:0x7f8404003570
[PHY] gNB_app_task() Creating RRC instance RC.nrrrc[0]:0x7f8404003590 (1 of 1)
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] gNBs.[0]: 14/14 parameters successfully set, (8 to default value)
[LIBCONFIG] gNBs.[0].servingCellConfigCommon.[0]: 155/155 parameters successfully set, (83 to default value)
[RRC] Read in ServingCellConfigCommon (PhysCellId 0, ABSFREQSSB 641032, DLBand 78, ABSFREQPOINTA 640000, DLBW 106,RACH_TargetReceivedPower -118
Checking element 15 : 4294967295
removing pdsch_TimeDomainAllocationList element 15
List size now 15
Checking element 14 : 4294967295
removing pdsch_TimeDomainAllocationList element 14
List size now 14
Checking element 13 : 4294967295
removing pdsch_TimeDomainAllocationList element 13
List size now 13
Checking element 12 : 4294967295
removing pdsch_TimeDomainAllocationList element 12
List size now 12
Checking element 11 : 4294967295
removing pdsch_TimeDomainAllocationList element 11
List size now 11
Checking element 10 : 4294967295
removing pdsch_TimeDomainAllocationList element 10
List size now 10
Checking element 9 : 4294967295
removing pdsch_TimeDomainAllocationList element 9
List size now 9
Checking element 8 : 4294967295
removing pdsch_TimeDomainAllocationList element 8
List size now 8
Checking element 7 : 4294967295
removing pdsch_TimeDomainAllocationList element 7
List size now 7
Checking element 6 : 4294967295
removing pdsch_TimeDomainAllocationList element 6
List size now 6
Checking element 5 : 4294967295
removing pdsch_TimeDomainAllocationList element 5
List size now 5
Checking element 4 : 4294967295
removing pdsch_TimeDomainAllocationList element 4
List size now 4
Checking element 3 : 0
Checking element 2 : 0
Checking element 1 : 0
Checking element 0 : 0
NRRRC 0: Southbound Transport local_mac
[LIBCONFIG] gNBs.[0].plmn_list.[0]: 3/3 parameters successfully set, (0 to default value)
SSB SCO 31
pdsch_AntennaPorts 1
[GNB_APP] Sending configuration message to NR_RRC task
[TMR] Created Posix thread TASK_GNB_APP
[NR_RRC] Creating NR RRC gNB Task
[NR_RRC] Entering main loop of NR_RRC message task
[TMR] Created Posix thread TASK_RRC_GNB
[NR_RRC] Received message NRRRC_CONFIGURATION_REQ
[NR_RRC] [gNB 0] Received NRRRC_CONFIGURATION_REQ : 0x7f8404004b40
[NR_RRC] [FRAME 00000][eNB][MOD 00][RNTI 0] Init...
[NR_RRC] [FRAME 00000][eNB][MOD 00][RNTI 0] Checking release
[NR_RRC] Done init_NR_SI
[MAC] Configuring common parameters from NR ServingCellConfig
[PHY] config_common() dl_BandwidthP:40
[PHY] Computing dl_frequency (pointA 640000 => 3600000000 (dlmin 3300000, nr_bandtable[27].N_OFFs_DL 620000))
[PHY] config_common() dl_BandwidthP:40
[PHY] Computing dl_frequency (pointA 640000 => 3600000000 (dlmin 3300000, nr_bandtable[27].N_OFFs_DL 620000))
[PHY] Scanning band 1, dl_min 2110000, ul_min 1920000
[PHY] Scanning band 2, dl_min 1930000, ul_min 1850000
[PHY] Scanning band 3, dl_min 1805000, ul_min 1710000
[PHY] Scanning band 5, dl_min 869000, ul_min 824000
[PHY] Scanning band 7, dl_min 2620000, ul_min 2500000
[PHY] Scanning band 8, dl_min 925000, ul_min 880000
[PHY] Scanning band 12, dl_min 728000, ul_min 698000
[PHY] Scanning band 20, dl_min 791000, ul_min 832000
[PHY] Scanning band 25, dl_min 1930000, ul_min 1850000
[PHY] Scanning band 28, dl_min 758000, ul_min 703000
[PHY] Scanning band 34, dl_min 2010000, ul_min 2010000
[PHY] Scanning band 38, dl_min 2570000, ul_min 2570000
[PHY] Scanning band 39, dl_min 1880000, ul_min 1880000
[PHY] Scanning band 40, dl_min 2300000, ul_min 2300000
[PHY] Scanning band 41, dl_min 2496000, ul_min 2496000
[PHY] Scanning band 41, dl_min 2496000, ul_min 2496000
[PHY] Scanning band 50, dl_min 1432000, ul_min 1432000
[PHY] Scanning band 51, dl_min 1427000, ul_min 1427000
[PHY] Scanning band 66, dl_min 2110000, ul_min 1710000
[PHY] Scanning band 70, dl_min 1995000, ul_min 1695000
[PHY] Scanning band 71, dl_min 617000, ul_min 663000
[PHY] Scanning band 74, dl_min 1475000, ul_min 1427000
[PHY] Scanning band 75, dl_min 1432000, ul_min 0
[PHY] Scanning band 76, dl_min 1427000, ul_min 0
[PHY] Scanning band 77, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 77, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 78, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 78, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 79, dl_min 4400000, ul_min 4400000
[PHY] Scanning band 79, dl_min 4400000, ul_min 4400000
[PHY] Scanning band 80, dl_min 0, ul_min 1710000
[PHY] Scanning band 81, dl_min 0, ul_min 860000
[PHY] Scanning band 82, dl_min 0, ul_min 832000
[PHY] Scanning band 83, dl_min 0, ul_min 703000
[PHY] Scanning band 84, dl_min 0, ul_min 1920000
[PHY] Scanning band 86, dl_min 0, ul_min 1710000
[PHY] Scanning band 257, dl_min 26500000, ul_min 26500000
[PHY] Scanning band 257, dl_min 26500000, ul_min 26500000
[PHY] Scanning band 258, dl_min 24250000, ul_min 24250000
[PHY] Scanning band 258, dl_min 24250000, ul_min 24250000
[PHY] Scanning band 260, dl_min 37000000, ul_min 37000000
[PHY] Scanning band 260, dl_min 37000000, ul_min 37000000
[PHY] Scanning band 261, dl_min 27500000, ul_min 27500000
[PHY] Scanning band 261, dl_min 27500000, ul_min 27500000
[PHY] DL frequency 3600000000: band 78, frame_type 1, UL frequency 3600000000
found_sequences 16
[MAC] Set TX/RX antenna number to 1 (num ssb 1: 80000000,0)
[MAC] Setting TDD configuration period to 6
[PHY] TDD has been properly configurated
[MAC] rrc_mac_config_req_gNB() /home/sdr/openairinterface5g/openair2/LAYER2/NR_MAC_gNB/config.c:345 RC.nrmac[Mod_idP]->if_inst->NR_PHY_config_req:0x55634a41d380
[PHY] Scanning band 1, dl_min 2110000, ul_min 1920000
[PHY] Scanning band 2, dl_min 1930000, ul_min 1850000
[PHY] Scanning band 3, dl_min 1805000, ul_min 1710000
[PHY] Scanning band 5, dl_min 869000, ul_min 824000
[PHY] Scanning band 7, dl_min 2620000, ul_min 2500000
[PHY] Scanning band 8, dl_min 925000, ul_min 880000
[PHY] Scanning band 12, dl_min 728000, ul_min 698000
[PHY] Scanning band 20, dl_min 791000, ul_min 832000
[PHY] Scanning band 25, dl_min 1930000, ul_min 1850000
[PHY] Scanning band 28, dl_min 758000, ul_min 703000
[PHY] Scanning band 34, dl_min 2010000, ul_min 2010000
[PHY] Scanning band 38, dl_min 2570000, ul_min 2570000
[PHY] Scanning band 39, dl_min 1880000, ul_min 1880000
[PHY] Scanning band 40, dl_min 2300000, ul_min 2300000
[PHY] Scanning band 41, dl_min 2496000, ul_min 2496000
[PHY] Scanning band 41, dl_min 2496000, ul_min 2496000
[PHY] Scanning band 50, dl_min 1432000, ul_min 1432000
[PHY] Scanning band 51, dl_min 1427000, ul_min 1427000
[PHY] Scanning band 66, dl_min 2110000, ul_min 1710000
[PHY] Scanning band 70, dl_min 1995000, ul_min 1695000
[PHY] Scanning band 71, dl_min 617000, ul_min 663000
[PHY] Scanning band 74, dl_min 1475000, ul_min 1427000
[PHY] Scanning band 75, dl_min 1432000, ul_min 0
[PHY] Scanning band 76, dl_min 1427000, ul_min 0
[PHY] Scanning band 77, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 77, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 78, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 78, dl_min 3300000, ul_min 3300000
[PHY] Scanning band 79, dl_min 4400000, ul_min 4400000
[PHY] Scanning band 79, dl_min 4400000, ul_min 4400000
[PHY] Scanning band 80, dl_min 0, ul_min 1710000
[PHY] Scanning band 81, dl_min 0, ul_min 860000
[PHY] Scanning band 82, dl_min 0, ul_min 832000
[PHY] Scanning band 83, dl_min 0, ul_min 703000
[PHY] Scanning band 84, dl_min 0, ul_min 1920000
[PHY] Scanning band 86, dl_min 0, ul_min 1710000
[PHY] Scanning band 257, dl_min 26500000, ul_min 26500000
[PHY] Scanning band 257, dl_min 26500000, ul_min 26500000
[PHY] Scanning band 258, dl_min 24250000, ul_min 24250000
[PHY] Scanning band 258, dl_min 24250000, ul_min 24250000
[PHY] Scanning band 260, dl_min 37000000, ul_min 37000000
[PHY] Scanning band 260, dl_min 37000000, ul_min 37000000
[PHY] Scanning band 261, dl_min 27500000, ul_min 27500000
[PHY] Scanning band 261, dl_min 27500000, ul_min 27500000
[PHY] DL frequency 3619080000: band 78, frame_type 1, UL frequency 3619080000
[PHY] Configuring MIB for instance 0, : (Nid_cell 0,DL freq 3619080000, UL freq 3619080000)
[PHY] Initializing frame parms for mu 1, N_RB 106, Ncp 0
[PHY] gNB 0 configured
[NR_RRC] [FRAME 00000][eNB][MOD 00][RNTI 0] gNB:OPENAIR NR RRC IN....
NFAPI MODE:MONOLITHIC
START MAIN THREADS
RC.nb_nr_L1_inst:1
Initializing gNB threads single_thread_flag:1 wait_for_sync:0
[PHY] gNB L1 structure RC.gNB allocated @ 0x7f8404000b20
[PHY] [lte-softmodem.c] gNB structure RC.gNB[0] allocated @ 0x7f840d5ce010
[PHY] Initializing gNB 0 single_thread_flag:1
[PHY] Initializing gNB 0
[PHY] Registering with MAC interface module (before 0x7f8404001c40)
[PHY] Installing callbacks for IF_Module - UL_indication
[PHY] Registering with MAC interface module (after 0x7f8404001c40)
[PHY] Setting indication lists
[PHY] [nr-softmodem.c] gNB structure allocated
wait_gNBs()
Waiting for gNB L1 instances to all get configured ... sleeping 50ms (nb_nr_sL1_inst 1)
gNB L1 are configured
About to Init RU threads RC.nb_RU:1
Initializing RU threads
configuring RU from file
[LIBCONFIG] RUs.[0]: 27/27 parameters successfully set, (16 to default value)
Set RU mask to 1
Creating RC.ru[0]:0x55634d019380
Setting function for RU 0 to gNodeB_3GPP
[PHY] number of L1 instances 1, number of RU 1, number of CPU cores 8
[PHY] DJP - delete code above this /home/sdr/openairinterface5g/executables/nr-ru.c:2254
[PHY] Copying frame parms from gNB in RC to gNB 0 in ru 0 and frame_parms in ru
configuring ru_id 0 (start_rf 0x55634a3c6020)
[PHY] Starting ru_thread 0
[PHY] Initializing RU proc 0 (,synch_to_ext_device),
[PHY] Starting RU 0 (,synch_to_ext_device),
[PHY] Initializing frame parms for mu 1, N_RB 106, Ncp 0
[PHY] fp->scs=30000
[PHY] fp->ofdm_symbol_size=2048
[PHY] fp->nb_prefix_samples0=176
[PHY] fp->nb_prefix_samples=144
[PHY] fp->slots_per_subframe=2
[PHY] fp->samples_per_subframe_wCP=57344
[PHY] fp->samples_per_frame_wCP=573440
[PHY] fp->samples_per_subframe=61440
[PHY] fp->samples_per_frame=614400
[PHY] fp->dl_CarrierFreq=3619080000
[PHY] fp->ul_CarrierFreq=3619080000
channel 0, Setting tx_gain offset 0.000000, rx_gain offset 114.000000, tx_freq 3619080000.000000, rx_freq 3619080000.000000
[PHY] Initializing RU signal buffers (if_south local RF) nb_tx 1
[PHY] [INIT] common.txdata[0] = 0x7f840812b040 (2457600 bytes)
[PHY] nb_tx 1
[PHY] rxdata_7_5kHz[0] 0x7f840803a040 for RU 0
[PHY] [INIT] common.txdata_BF= 0x7f83f4000b00 (8 bytes)
[PHY] txdataF_BF[0] 0x7f840d554040 for RU 0
[PHY] rxdataF[0] 0x7f840276d040 for RU 0
[PHY] [INIT] nr_phy_init_RU() RC.nb_nr_L1_inst:1
[LIBCONFIG] device.recplay: 7/7 parameters successfully set, (7 to default value)
[LIBCONFIG] device: 1/1 parameters successfully set, (1 to default value)
[LIBCONFIG] loader: 2/2 parameters successfully set, (2 to default value)
[LIBCONFIG] loader.oai_device: 2/2 parameters successfully set, (1 to default value)
[PHY] init_RU_proc() DJP - added creation of pthread_prach
[PHY] init feptx thread 0
[PHY] init feptx thread 1
wait RUs
[PHY] Waiting for RUs to be configured ... RC.ru_mask:01
[LOADER] library liboai_device.so successfully loaded
[HW] UHD version 3.15.0.0-0-unknown (3.15.0)
[HW] Checking for USRP with args addr=192.168.10.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2
[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501; UHD_3.15.0.0-0-unknown
[HW] Found USRP n3xx
Found USRP n300
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.10.2,type=n3xx,product=n310,serial=31CF3C1,claimed=False,addr=192.168.10.2,second_addr=192.168.20.2,master_clock_rate=122880000.000000
[WARNING] [MPM.RPCServer] A timeout event occured!
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[INFO] [MPM.PeriphManager] init() called with device args `clock_source=external,time_source=internal,second_addr=192.168.20.2,master_clock_rate=122880000.000000,product=n310,mgmt_addr=192.168.10.2'.
[INFO] [0/Replay_0] Initializing block control (NOC ID: 0x4E91A00000000004)
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[PHY] ru_thread_prach() RACH waiting for RU to be configured
[ERROR] [UHD] Exception caught in safe-call.
in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)0]
at /home/sdr/uhd-3.15.0.0/host/lib/rfnoc/ctrl_iface.cpp:52
this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_01_Port_40) no response packet - AssertionError: bool(buff)
in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)0; uint64_t = long unsigned int]
at /home/sdr/uhd-3.15.0.0/host/lib/rfnoc/ctrl_iface.cpp:151
[ERROR] [MPMD] Failure during block enumeration: EnvironmentError: IOError: Block ctrl (CE_01_Port_40) no response packet - AssertionError: bool(buff)
in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)0; uint64_t = long unsigned int]
at /home/sdr/uhd-3.15.0.0/host/lib/rfnoc/ctrl_iface.cpp:151
terminate called after throwing an instance of 'uhd::runtime_error'
what(): RuntimeError: Failed to run enumerate_rfnoc_blocks()
Linux signal Aborted...
/home/sdr/openairinterface5g/executables/softmodem-common.c:187 signal_handler() Exiting OAI softmodem: softmodem starting exit procedure
[PHY] ru_thread_prach() RACH waiting for RU to be configured