求解微分方程组的ODE算法

4阶5级龙格库塔法用于解一阶微分方程（组），对于高阶微分方程，可以将其转换为一阶微分方程组求解。原程序由John.H.Mathews编写（数值方法matlab版），但只能解微分方程，不能解微分方程组。由LiuLiu@uestc修改，使之能够解微分方程组。该程序精度比matlab自带的ode45更高。

function [Rt Rx]=rkf45(f,tspan,ya,m,tol)
% Input:
%          - f   function column vector
%          - tspan[a,b] left & right point of [a,b]
%          - ya  initial value column vector
%          -m    initial guess for number of steps
%          -tol  tolerance
% Output:
%          - Rt  solution: vector of abscissas
%          - Rx  solution: vector of ordinates
% Program by John.Mathews, improved by liuliu@uestc

if length(tspan)~=2
    error('length of vector tspan must be 2.');
end
if ~isnumeric(tspan)
    error('TSPAN should be a vector of integration steps.');
end
if ~isnumeric(ya)
    error('Ya should be a vector of initial conditions.');
end
h = diff(tspan);
if any(sign(h(1))*h <= 0)
    error('Entries of TSPAN are not in order.') ;
end 
a=tspan(1);
b=tspan(2);
ya=ya(:);

a2 = 1/4; b2 = 1/4; a3 = 3/8; b3 = 3/32; c3 = 9/32; a4 = 12/13;
b4 = 1932/2197; c4 = -7200/2197; d4 = 7296/2197; a5 = 1;
b5 = 439/216; c5 = -8; d5 = 3680/513; e5 = -845/4104; a6 = 1/2;
b6 = -8/27; c6 = 2; d6 = -3544/2565; e6 = 1859/4104; f6 = -11/40;
r1 = 1/360; r3 = -128/4275; r4 = -2197/75240; r5 = 1/50;
r6 = 2/55; n1 = 25/216; n3 = 1408/2565; n4 = 2197/4104; n5 = -1/5;
big = 1e15;
h = (b-a)/m;
hmin = h/64;% 步长自适应范围下限
hmax = 64*h;% 步长自适应范围上限
max1 = 200;% 迭代次数上限
Y(1,:) = ya;
T(1) = a;
j = 1;
% tj = T(1);
br = b - 0.00001*abs(b);
while (T(j)   if ((T(j)+h)>br), h = b - T(j); end
  
  %caculate values of k1...k6,y1...y6
  tj = T(j);
  yj = Y(j,:);
  y1 = yj;
  k1 = h*feval(f,tj,y1);
  y2 = yj+b2*k1;                            
  if big   k2 = h*feval(f,tj+a2*h,y2);
  y3 = yj+b3*k1+c3*k2;                      if big   k3 = h*feval(f,tj+a3*h,y3);
  y4 = yj+b4*k1+c4*k2+d4*k3;               if big   k4 = h*feval(f,tj+a4*h,y4);
  y5 = yj+b5*k1+c5.*k2+d5*k3+e5*k4;        if big   k5 = h*feval(f,tj+a5*h,y5);
  y6 = yj+b6*k1+c6.*k2+d6*k3+e6*k4+f6*k5; if big   k6 = h*feval(f,tj+a6*h,y6);
  err = abs(r1*k1+r3*k3+r4*k4+r5*k5+r6*k6);
  ynew = yj+n1*k1+n3*k3+n4*k4+n5*k5;
  % error and step size control
  if ( (err     Y(j+1,:) = ynew;
    if ((tj+h)>br),
      T(j+1) = b;
    else
      T(j+1) = tj + h;
    end
    j = j+1;
    tj = T(j); 
  end
  if (max(err)==0),
    s = 0;
  else
    s1 = 0.84*(tol.*h./err).^(0.25);% 最佳步长值
    s=min(s1);
  end
  if ((s<0.75)&(h>2*hmin)), h = h/2; end
  if ((s>1.50)&(2*h   if (  (big end
% [Rt Rx]=[T' Y];
Rt=T';
Rx=Y; 

使用方法：

首先编写方程（组）文件（注意与ode45不同，这儿方程组为1Xn数组：

function dx= fun(t,x)
dx=zeros(1,2);
dx(1)=x(1)+x(2)*2+0*t;
dx(2)=3*x(1)+x(2)*2+0*t;

然后使用：

[Rt,Rx]=rkf45(@fun,[0,0.2],[6;4],100,1e-7)