ArcEngine和GDAL读写栅格数据机制对比（一）

　最近应用AE开发插值和栅格转等值线的程序，涉及到栅格读写的有关内容。联想到ArcGIS利用了GDAL的某些东西，从AE的OMD中也发现RasterDataset和RasterBand这些命名和GDAL的很相似。所以觉得应该对比学习一下：ArcEngine和GDAL读写栅格数据机制对比。

 

　　AE涉及栅格图像读写的主要是Workspace、RasterDataset、Pixel blocks和 RasterBand。如图所示。RasterDataset实现了接口IrasterBandCollection，是RasterBand的集合。所以RasterDataset依赖于RasterBand。

1)   RasterDataset：

The RasterDataset class represents a raster dataset stored in a storage media, file system, geodatabase, or in memory. RasterDataset is a file raster dataset if it is opened from a file system or a personal geodatabase, and it is a database raster dataset if it is opened from a file geodatabase or an ArcSDE geodatabase. A raster dataset in an unmanaged raster catalog, where raster datasets are stored in a file system, is also a file raster dataset. ArcGIS allows you to create an in-memory RasterDataset where the pixels are stored in memory. This type of raster dataset has the characteristics of a file raster dataset. A file raster dataset and a geodatabase raster dataset behave the same except for some minor differences.

Creating raster datasets in various workspaces requires specifying the properties of the raster data to be created as well as the properties of the storage container. In an ArcSDE geodatabase, raster data is stored as a set of database management system (DBMS) tables that are used to manage the pixel values, pyramids, and other auxiliary information. The pixels of raster data are divided into small tiles, and each tile is stored as a binary large object (BLOB) in a row of the block table. The raster column in the business table defines the properties of the raster dataset, and the geometry column defines properties of the footprint of the raster dataset. A file geodatabase raster has a similar implementation as an ArcSDE geodatabase. The only difference is that raster data is stored as a set of file geodatabase tables in the file system instead of in a relational geodatabase.

IRasterWorkspaceEx is used to create a raster dataset and a raster catalog in a geodatabase. When creating data in a geodatabase, RasterDef can be used to set the properties of the raster field, and RasterStorageDef can be used to specify the storage properties such as tile size, cell size, pyramid origin, and compression. Because raster data in a personal geodatabase is implemented by converting it to an IMAGINE file format and managing it in the personal geodatabase, only some of the raster storage properties apply to a personal geodatabase (such as cell size and compression).

Creating a geodatabase raster dataset using IRasterWorkspaceEx initially creates an empty raster dataset, which servers as a placeholder for the specified properties of the raster dataset. The extent and pixel values of the dataset can be populated by mosaicking from other raster dataset or, alternatively, writing using PixelBlock.

To create a raster dataset in any supported file raster format using IRasterWorkspace2, the origin, number of bands, pixel type, width, and height of the raster dataset must be specified along with other required parameters. The created raster dataset has a specified dimension and a default pixel value. The default pixel value is normally the maximum value of the specified pixel type and can be populated by writing pixel blocks. If IRasterWorkspace2 is used to create a geodatabase raster dataset, the default storage parameters are used.

2)   Raster

The Raster class, in contrast to the static RasterDataset and RasterBand classes, is transient in nature and can be modified without affecting the source data. This allows the raster to represent what you want—for example, you can set a transformation or a pixel filter on a raster, specify a projection or extent, and set other properties without changing the raster dataset. If you want to persist change, the modified raster can be saved to another raster dataset using the ISaveAs interface.

Although Raster is always transient in nature, it must be associated with one or more raster bands, which provides a source for the data to be read through the raster. As such, the Raster is most easily understood as a vehicle to provide resampling, transformation, and data type conversion from one or more raster bands to a desired output coordinate system.

3)   RasterBand

A representation of a single band of a raster dataset on disk.

RasterBand is a non-creatable object. References to non-creatable objects must be obtained through other objects.

The RasterBand object represents an existing band of a raster dataset. This band may be the only band in a single raster dataset or one band in a multiband raster dataset.

A RasterBand can be obtained from a RasterDataset or a Raster using IRasterBandCollection::Item.

The RasterBand class represents an existing band of a raster dataset. You can access a RasterBand of a Raster or a RasterDataset. Regardless of whether it is derived from the static RasterDataset or the transient Raster, the RasterBand always represents a static band of raster data.

The IRasterBand interface provides access to the raster color map, histogram, statistics, and attribute table if they exist. 

 4)       Pixel blocks

The PixelBlock class is a container for pixel arrays. It has the properties of width, height, pixel type, and number of planes. Each plane is a pixel array corresponding to one raster band. The PixelBlock class can handle generic pixel arrays from any raster data source. To support different pixel types, PixelBlock transports pixels in a SafeArray, which can contain many different data types.

The PixelBlock class is used to read, modify, and write pixel values or a portion of pixel values of the raster data. Create a pixel block from a raster using the IRaster.CreatePixelBlock method. This initializes the size and other properties of the pixel block. Use the IRaster.Read method to read the pixel values into the pixel block, then use IPixelBlock3.PixelData or PixelDataByRef to get or modify the pixel values of the pixel block. The IRasterEdit interface can be used to write the pixel block to the raster dataset.

GDAL涉及栅格图像读写的主要是GDALDataset和GDALRasterBand。

GDALDataset：A set of associated raster bands, usually from one file.

GDALRasterBand：A single raster band (or channel)

理解AE和GDAL的类似要从PixelBlock和RasterIO函数说起。RasterIO的参数说明可以参阅李民录的CADN博客。

CPLErr GDALDataset::RasterIO	(	GDALRWFlag	eRWFlag,
		int	nXOff,
		int	nYOff,
		int	nXSize,
		int	nYSize,
		void *	pData,
		int	nBufXSize,
		int	nBufYSize,
		GDALDataType	eBufType,
		int	nBandCount,
		int *	panBandMap,
		int	nPixelSpace,
		int	nLineSpace,
		int	nBandSpace
	)

eRWFlag	Either GF_Read to read a region of data, or GF_Write to write a region of data.
	nXOff	The pixel offset to the top left corner of the region of the band to be accessed. This would be zero to start from the left side.
	nYOff	The line offset to the top left corner of the region of the band to be accessed. This would be zero to start from the top.
	nXSize	The width of the region of the band to be accessed in pixels.
	nYSize	The height of the region of the band to be accessed in lines.
	pData	The buffer into which the data should be read, or from which it should be written. This buffer must contain at least nBufXSize * nBufYSize * nBandCount words of type eBufType. It is organized in left to right,top to bottom pixel order. Spacing is controlled by the nPixelSpace, and nLineSpace parameters.
	nBufXSize	the width of the buffer image into which the desired region is to be read, or from which it is to be written.
	nBufYSize	the height of the buffer image into which the desired region is to be read, or from which it is to be written.
	eBufType	the type of the pixel values in the pData data buffer. The pixel values will automatically be translated to/from the GDALRasterBand data type as needed.
	nBandCount	the number of bands being read or written.
	panBandMap	the list of nBandCount band numbers being read/written. Note band numbers are 1 based. This may be NULL to select the first nBandCount bands.
	nPixelSpace	The byte offset from the start of one pixel value in pData to the start of the next pixel value within a scanline. If defaulted (0) the size of the datatype eBufType is used.
	nLineSpace	The byte offset from the start of one scanline in pData to the start of the next. If defaulted (0) the size of the datatype eBufType * nBufXSize is used.
	nBandSpace	the byte offset from the start of one bands data to the start of the next. If defaulted (0) the value will be nLineSpace * nBufYSize implying band sequential organization of the data buffer.

PixelBlock的作用是不是和RasterIO函数中的pData、nXSize和nYSize很像?

Raster主要是将数据存储在内存中，用于显示，连接起显示和数据源。