qualcomm msm8974ab bring up kernel log

<6>[    0.000000] Booting Linux on physical CPU 0


<6>[    0.000000] Initializing cgroup subsys cpu


<5>[    0.000000] Linux version 3.4.0-g0595304-dirty (author.fu@androidserver1) (gcc version 4.7 (GCC) ) #2 SMP PREEMPT Fri Jan 17 10:13:53 CST 2014


<4>[    0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d


<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache


<6>[    0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974Pro-AA/AB CDP


<6>[    0.000000] qcom,ion-heap@28 reserved EBI1 size 614000


<6>[    0.000000] qcom,mdss_fb_primary reserved EBI1 size ff0000


<6>[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000


<6>[    0.000000] qcom,msm-rtb reserved EBI1 size 100000


<6>[    0.000000] qcom,msm-contig-mem reserved EBI1 size 280000


<6>[    0.000000] Node qcom,msm-mem-hole removed memory 5a00000-d200000


<6>[    0.000000] Node qcom,msm-mem-hole removed memory fa00000-ff00000


<6>[    0.000000] memory pool 3 (start 0x7e600000 size 1a00000) initialized


<6>[    0.000000] cma: CMA: reserved 16 MiB at 36400000


<6>[    0.000000] cma: Found secure_region, memory base 0, size 252 MiB


<6>[    0.000000] cma: CMA: reserved 252 MiB at 6e800000


<6>[    0.000000] cma: Found adsp_region, memory base 0, size 63 MiB


<6>[    0.000000] cma: CMA: reserved 64 MiB at 6a800000


<6>[    0.000000] cma: Found qsecom_region, memory base 0, size 17 MiB


<6>[    0.000000] cma: CMA: reserved 20 MiB at 69400000


<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc


<6>[    0.000000] IMEM DT static mapping successful


<7>[    0.000000] On node 0 totalpages: 485632


<7>[    0.000000] free_area_init_node: node 0, pgdat c0fd68c0, node_mem_map cd200000


<7>[    0.000000]   Normal zone: 1992 pages used for memmap


<7>[    0.000000]   Normal zone: 0 pages reserved


<7>[    0.000000]   Normal zone: 192568 pages, LIFO batch:31


<7>[    0.000000]   HighMem zone: 2617 pages used for memmap


<7>[    0.000000]   HighMem zone: 288455 pages, LIFO batch:31


<6>[    0.000000] PERCPU: Embedded 10 pages/cpu @ce456000 s16768 r8192 d16000 u40960


<7>[    0.000000] pcpu-alloc: s16768 r8192 d16000 u40960 alloc=10*4096


<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 


<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 481023


<5>[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 androidboot.emmc=true androidboot.serialno=1ad073ab androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_toshiba_720p_video


<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)


<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)


<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)


<6>[    0.000000] Memory: 90MB 40MB 1767MB = 1897MB total


<5>[    0.000000] Memory: 1513980k/1513980k available, 455172k reserved, 820224K highmem


<5>[    0.000000] Virtual kernel memory layout:


<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)


<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)


<5>[    0.000000]   vmalloc : 0xf7800000 - 0xff000000   ( 120 MB)


<5>[    0.000000]    lowmem : 0xcff00000 - 0xf7500000   ( 630 MB)


<5>[    0.000000]   vmalloc : 0xcfa00000 - 0xcff00000   (   5 MB)


<5>[    0.000000]    lowmem : 0xcd200000 - 0xcfa00000   (  40 MB)


<5>[    0.000000]   vmalloc : 0xc5a00000 - 0xcd200000   ( 120 MB)


<5>[    0.000000]    lowmem : 0xc0000000 - 0xc5a00000   (  90 MB)


<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)


<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)


<5>[    0.000000]       .text : 0xc0008000 - 0xc0dba90c   (14027 kB)


<5>[    0.000000]       .init : 0xc0e00000 - 0xc0f16180   (1113 kB)


<5>[    0.000000]       .data : 0xc0f18000 - 0xc100f69c   ( 990 kB)


<5>[    0.000000]        .bss : 0xc100f6c0 - 0xc1275e50   (2458 kB)


<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1


<6>[    0.000000] Preemptible hierarchical RCU implementation.


<6>[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.


<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16


<6>[    0.000000] kmemleak: Kernel memory leak detector disabled


<6>[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms


<6>[    0.000000] Switching to timer-based delay loop


<6>[    0.000000] Console: colour dummy device 80x30


<6>[    0.000153] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)


<6>[    0.000172] pid_max: default: 32768 minimum: 301


<6>[    0.000420] Security Framework initialized


<6>[    0.000446] SELinux:  Initializing.


<7>[    0.000489] SELinux:  Starting in permissive mode


<6>[    0.000570] Mount-cache hash table entries: 512


<6>[    0.001671] Initializing cgroup subsys debug


<6>[    0.001684] Initializing cgroup subsys cpuacct


<6>[    0.001694] Initializing cgroup subsys freezer


<6>[    0.001745] CPU: Testing write buffer coherency: ok


<6>[    0.002162] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000


<6>[    0.002224] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available


<6>[    0.005389] Setting up static identity map for 0x9110a8 - 0x911130


<6>[    0.005423] Configuring XPU violations to be fatal errors


<6>[    0.005436] MSM Memory Dump table set up


<6>[    0.007519] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001


<6>[    0.008614] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002


<6>[    0.009879] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003


<6>[    0.010101] Brought up 4 CPUs


<6>[    0.010115] SMP: Total of 4 processors activated (153.60 BogoMIPS).


<6>[    0.024256] dummy: 


<6>[    0.375287] NET: Registered protocol family 16


<6>[    0.387094] DMA: preallocated 256 KiB pool for atomic coherent allocations


<6>[    0.388869] KPI: Bootloader start count = 107893376


<6>[    0.388880] KPI: Bootloader end count = 1170527843


<6>[    0.388889] KPI: Bootloader display count = 2890732124


<6>[    0.388899] KPI: Bootloader load kernel count = 3797236245


<6>[    0.388909] KPI: Kernel MPM timestamp = 183720


<6>[    0.388918] KPI: Kernel MPM Clock frequency = 32768


<6>[    0.388935] socinfo_print: v8, id=218, ver=1.0, raw_id=1976, raw_ver=0, hw_plat=1, hw_plat_ver=65536


<6>[    0.388940]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609


<3>[    0.389181] msm_8974_init_gpiomux:1385 socinfo_get_version 10000


<6>[    0.409764] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio


<6>[    0.433249] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized


<6>[    0.459074] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle 


<6>[    0.459718] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle 


<6>[    0.460379] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle 


<6>[    0.461016] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle 


<6>[    0.461670] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle 


<6>[    0.462304] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle 


<6>[    0.462939] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle 


<6>[    0.463650] 8841_s3: 1050 mV normal idle 


<6>[    0.464349] 8841_s4: 815 <--> 900 mV at 0 mV normal idle 


<6>[    0.464957] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle 


<6>[    0.465654] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle 


<6>[    0.466361] 8941_s1: 1300 mV normal idle 


<6>[    0.467011] 8941_s2: 2150 mV normal idle 


<6>[    0.467718] 8941_s3: 1800 mV normal idle 


<6>[    0.468376] 8941_l1: 1225 mV normal idle 


<6>[    0.469065] 8941_l2: 1200 mV normal idle 


<6>[    0.469747] 8941_l3: 1225 mV normal idle 


<6>[    0.470397] 8941_l4: 1225 mV normal idle 


<6>[    0.471061] 8941_l5: 1800 mV normal idle 


<6>[    0.471757] 8941_l6: 1800 mV normal idle 


<6>[    0.472391] 8941_l7: 1800 mV normal idle 


<6>[    0.473089] 8941_l8: 1800 mV normal idle 


<6>[    0.473806] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle 


<6>[    0.474473] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle 


<6>[    0.475161] 8941_l11: 1300 <--> 1350 mV at 1300 mV normal idle 


<6>[    0.475846] 8941_l12: 1800 mV normal idle 


<6>[    0.476492] 8941_l12_ao: 1800 mV normal idle 


<6>[    0.477190] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle 


<6>[    0.477866] 8941_l14: 1800 mV normal idle 


<6>[    0.478521] 8941_l15: 2050 mV normal idle 


<6>[    0.479246] 8941_l16: 2700 mV normal idle 


<6>[    0.479919] 8941_l17: 2850 mV normal idle 


<6>[    0.480578] 8941_l18: 2850 mV normal idle 


<6>[    0.481266] 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle 


<6>[    0.481927] 8941_l20: 2950 mV normal idle 


<6>[    0.482601] 8941_l21: 2950 mV normal idle 


<6>[    0.483340] 8941_l22: 1500 mV normal idle 


<6>[    0.484037] 8941_l23: 3000 mV normal idle 


<6>[    0.484732] 8941_l24: 3075 mV normal idle 


<6>[    0.485416] 8941_lvs1: 


<6>[    0.486012] 8941_lvs2: 


<6>[    0.486617] 8941_lvs3: 


<6>[    0.489215] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4


<6>[    0.489228] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4


<6>[    0.489686] krait0: 500 <--> 1120 mV at 900 mV fast normal idle 


<6>[    0.490429] krait1: 500 <--> 1120 mV at 900 mV fast normal idle 


<6>[    0.491126] krait2: 500 <--> 1120 mV at 900 mV fast normal idle 


<6>[    0.491809] krait3: 500 <--> 1120 mV at 900 mV fast normal idle 


<6>[    0.543001] msm-thermal qcom,msm-thermal.68: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues


<6>[    0.543830] vdd_restriction_reg_init:Defer vdd rstr freq init


<6>[    0.543847] msm-thermal qcom,msm-thermal.68: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues


<6>[    0.544381] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.


<6>[    0.544393] hw-breakpoint: maximum watchpoint size is 8 bytes.


<6>[    0.545123] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized


<6>[    0.549198] 8941_boost: 5000 mV 


<6>[    0.549877] 8941_mvs1: 


<3>[    0.549940] qcom,qpnp-regulator qpnp-regulator-f614b000: Failed to find supply parent


<6>[    0.550141] spmi qpnp-regulator-f614b000: Driver qcom,qpnp-regulator requests probe deferral


<6>[    0.550492] 8941_mvs2: 


<6>[    0.550536] 8941_mvs2: supplied by 8941_boost


<4>[    0.552411] kworker/u:1 used greatest stack depth: 6248 bytes left


<6>[    0.555051] sps:BAM 0xf9984000 (va:0xc5ae0000) enabled: ver:0x6, number of pipes:20


<6>[    0.555064] sps:BAM 0xf9984000 is registered.


<6>[    0.555086] sps:sps is ready.


<6>[    0.556300] spmi qpnp-bsi-f6149600: Driver qcom,qpnp-bsi requests probe deferral


<6>[    0.557970] gdsc_venus: 


<6>[    0.558473] gdsc_mdss: 


<6>[    0.558931] gdsc_jpeg: 


<6>[    0.559502] gdsc_vfe: 


<6>[    0.559911] gdsc_oxili_gx: 


<6>[    0.559979] gdsc_oxili_gx: supplied by 8841_s4_corner


<6>[    0.560492] gdsc_oxili_cx: 


<6>[    0.560936] gdsc_usb_hsic: 


<3>[    0.561667] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver


<6>[    0.563322] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized


<6>[    0.564789] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized


<6>[    0.566309] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized


<4>[    0.568189] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120


<6>[    0.569100] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized


<4>[    0.569417] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 6144


<6>[    0.570349] msm_bus_fabric fc470000.msm-ocmem-noc: msmbus_coresight initialized


<6>[    0.571334] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5c00000


<6>[    0.571816] Physical OCMEM zone layout:


<6>[    0.571829]  zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)


<6>[    0.571846]  zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)


<6>[    0.571861]  zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)


<6>[    0.605696] bio: create slab at 0


<6>[    0.606736] platform spi_eth_phy_vreg.78: Driver reg-fixed-voltage requests probe deferral


<6>[    0.606846] platform regulator-tpd4s214.81: Driver reg-fixed-voltage requests probe deferral


<6>[    0.607752] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device


<3>[    0.607856] ION-heap mm: Cannot specify alignment for this type of heap


<6>[    0.607970] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device


<3>[    0.608070] ION-heap adsp: Cannot specify alignment for this type of heap


<6>[    0.608208] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device


<6>[    0.609137] ION heap system created


<6>[    0.609306] ION heap kmalloc created


<6>[    0.609346] ION heap mm created at 0x6e800000 with size fc00000


<6>[    0.609381] ION heap adsp created at 0x6a800000 with size 3f00000


<6>[    0.609415] ION heap qsecom created at 0x69400000 with size 1100000


<6>[    0.609471] ION heap audio created at 0x7e600000 with size 614000


<6>[    0.609509] ION heap pil_1 created at 0x05a00000 with size 2100000


<6>[    0.609546] ION heap pil_2 created at 0x08000000 with size 5000000


<5>[    0.611817] SCSI subsystem initialized


<6>[    0.612035] usbcore: registered new interface driver usbfs


<6>[    0.612150] usbcore: registered new interface driver hub


<6>[    0.612327] usbcore: registered new device driver usb


<6>[    0.612836] Linux media interface: v0.10


<6>[    0.612934] Linux video capture interface: v2.00


<6>[    0.616398] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5da0000, with 3 ctx banks


<6>[    0.618642] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5dc0000, with 3 ctx banks


<6>[    0.621643] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5de0000, with 5 ctx banks


<6>[    0.623921] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c5e00000, with 3 ctx banks


<6>[    0.626097] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c5e20000, with 3 ctx banks


<6>[    0.628077] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0


<6>[    0.628282] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1


<6>[    0.628485] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2


<6>[    0.628715] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0


<6>[    0.628932] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1


<6>[    0.629175] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2


<6>[    0.629435] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0


<6>[    0.629652] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1


<6>[    0.629869] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2


<6>[    0.630070] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3


<6>[    0.630272] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4


<6>[    0.630499] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0


<6>[    0.630701] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1


<6>[    0.630903] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2


<6>[    0.631119] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0


<6>[    0.631320] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1


<6>[    0.631538] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2


<6>[    0.632915] Advanced Linux Sound Architecture Driver Version 1.0.25.


<6>[    0.633637] Bluetooth: Core ver 2.16


<6>[    0.633698] NET: Registered protocol family 31


<6>[    0.633708] Bluetooth: HCI device and connection manager initialized


<6>[    0.633723] Bluetooth: HCI socket layer initialized


<6>[    0.633736] Bluetooth: L2CAP socket layer initialized


<6>[    0.634092] Bluetooth: SCO socket layer initialized


<6>[    0.634509] cfg80211: Calling CRDA to update world regulatory domain


<6>[    0.634554] cfg80211: World regulatory domain updated:


<6>[    0.634564] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)


<6>[    0.634578] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)


<6>[    0.634591] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)


<6>[    0.634604] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)


<6>[    0.634616] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)


<6>[    0.634629] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)


<6>[    0.634641] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)


<6>[    0.635346] Switching to clocksource arch_sys_counter


<6>[    0.693101] NET: Registered protocol family 2


<6>[    0.693609] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)


<6>[    0.696340] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)


<6>[    0.702172] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)


<6>[    0.703003] TCP: Hash tables configured (established 131072 bind 65536)


<6>[    0.703015] TCP: reno registered


<6>[    0.703088] UDP hash table entries: 512 (order: 2, 24576 bytes)


<6>[    0.703169] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)


<6>[    0.703531] NET: Registered protocol family 1


<6>[    0.703953] Trying to unpack rootfs image as initramfs...


<6>[    0.744019] Freeing initrd memory: 544K


<6>[    0.746973] Detected 9 counters on the L2CC PMU.


<7>[    0.748925] gpiochip_find_base: found new base at 992


<6>[    0.749065] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p


<7>[    0.749874] gpiochip_find_base: found new base at 960


<6>[    0.750022] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p


<7>[    0.750076] gpiochip_find_base: found new base at 928


<6>[    0.750207] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p


<7>[    0.751017] gpiochip_find_base: found new base at 896


<6>[    0.751150] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p


<7>[    0.751220] gpiochip_find_base: found new base at 864


<6>[    0.751377] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel


<7>[    0.752194] gpiochip_find_base: found new base at 832


<6>[    0.752327] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel


<7>[    0.752414] gpiochip_find_base: found new base at 800


<6>[    0.752562] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p


<7>[    0.753402] gpiochip_find_base: found new base at 768


<6>[    0.753535] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p


<7>[    0.753589] gpiochip_find_base: found new base at 736


<6>[    0.753737] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel


<7>[    0.754588] gpiochip_find_base: found new base at 704


<6>[    0.754721] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel


<7>[    0.754803] gpiochip_find_base: found new base at 672


<6>[    0.754952] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p


<7>[    0.755869] gpiochip_find_base: found new base at 640


<6>[    0.756003] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p


<7>[    0.756055] gpiochip_find_base: found new base at 608


<6>[    0.756205] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel


<7>[    0.757110] gpiochip_find_base: found new base at 576


<6>[    0.757244] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel


<7>[    0.757340] gpiochip_find_base: found new base at 544


<6>[    0.757474] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg


<7>[    0.758395] gpiochip_find_base: found new base at 512


<6>[    0.758530] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg


<7>[    0.758588] gpiochip_find_base: found new base at 480


<6>[    0.758721] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg


<7>[    0.759657] gpiochip_find_base: found new base at 448


<6>[    0.759808] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg


<6>[    0.761595] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot


<6>[    0.766328] pil_pronto fb21b000.qcom,pronto: using secure boot


<6>[    0.768539] pil_venus fdce0000.qcom,venus: using secure boot


<6>[    0.781347] NET: Registered protocol family 27


<6>[    0.788374] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 1


<6>[    0.788389] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 4


<6>[    0.788402] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 0


<6>[    0.793468] L2 @ 729600 KHz


<6>[    0.793637] CPU0 @ 960000 KHz


<6>[    0.793647] CPU1 @ unknown rate. Forcing new rate.


<6>[    0.793938] CPU1 @ 300000 KHz


<6>[    0.793962] CPU2 @ unknown rate. Forcing new rate.


<6>[    0.794261] CPU2 @ 300000 KHz


<6>[    0.794284] CPU3 @ unknown rate. Forcing new rate.


<6>[    0.794580] CPU3 @ 300000 KHz


<5>[    0.809035] msm_rpm_log_probe: OK


<3>[    0.859939] ocmem: Client sensors (id: 6) not allowed to use OCMEM


<3>[    0.859970] OCMEM notifier registration failed


<3>[    0.859999] sns_ocmem_main: sns_ocmem_init failed -14


<6>[    0.866884] mpm_counter: [    0.866869]:(199381)


<6>[    0.873246] audit: initializing netlink socket (disabled)


<5>[    0.873289] type=2000 audit(0.860:1): initialized


<4>[    0.934226] highmem bounce pool size: 64 pages


<6>[    0.939470] fuse init (API version 7.18)


<6>[    0.939740] msgmni has been set to 1388


<7>[    0.939768] SELinux:  Registering netfilter hooks


<6>[    0.941939] Block layer SCSI generic (bsg) driver version 0.4 loaded (author 247)


<6>[    0.941946] io scheduler noop registered


<6>[    0.941951] io scheduler deadline registered


<6>[    0.941963] io scheduler row registered (default)


<6>[    0.942066] io scheduler cfq registered


<6>[    0.942072] io scheduler test-iosched registered


<7>[    0.942471] gpiochip_find_base: found new base at 444


<6>[    0.942544] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp


<7>[    0.942748] qcom,qpnp-pin qpnp-pin-f6148a00: qpnp_pin_probe: gpio_chip registered between 444-447


<3>[    0.944086] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd0 incorrect owner 4


<3>[    0.944151] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd1 incorrect owner 4


<3>[    0.944333] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd4 incorrect owner 4


<3>[    0.944762] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xdb incorrect owner 2


<3>[    0.944945] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xde incorrect owner 2


<7>[    0.945257] gpiochip_find_base: found new base at 408


<6>[    0.945323] gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio


<7>[    0.946370] qcom,qpnp-pin qpnp-pin-f614a200: qpnp_pin_probe: gpio_chip registered between 408-443


<3>[    0.949180] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa2 incorrect owner 2


<7>[    0.949486] gpiochip_find_base: found new base at 401


<6>[    0.949545] gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp


<7>[    0.949900] qcom,qpnp-pin qpnp-pin-f614a400: qpnp_pin_probe: gpio_chip registered between 401-407


<6>[    0.950623] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5e40000


<6>[    0.950648] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5df4000


<4>[    0.950915] mdss_mdp_parse_bootarg: mdss_mdp_parse_bootarg:1435: pan_name=[1:dsi:0:qcom,mdss_dsi_toshiba_720p_video] end=[y]


<6>[    0.952716] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0


<6>[    0.952766] mdss_dsi_panel_init: Panel Name = toshiba 720p video mode dsi panel


<6>[    0.952880] mdss_dsi_panel_init:953 Continuous splash flag not found.


<6>[    0.952887] mdss_dsi_panel_init:969 Partial update disabled.


<6>[    0.953249] mdss_dsi_retrieve_ctrl_resources: dsi base=c5df8800 size=600


<6>[    0.954184] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi


<6>[    0.955631] hdmi_tx_init_resource: 'core_physical': start = 0xc5dfa100, len=0x370


<6>[    0.955644] hdmi_tx_init_resource: 'phy_physical': start = 0xc5dfc500, len=0x7c


<6>[    0.955656] hdmi_tx_init_resource: 'qfprom_physical': start = 0xc5e18000, len=0x60f0


<4>[    0.955942] hdmi_tx_check_capability: HDCP disabled


<6>[    0.956317] mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx


<6>[    0.959090] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.5


<6>[    0.959752] mdss_fb_alloc_fbmem_iommu: mdss_fb_alloc_fbmem_iommu frame buffer reserve_size=0xff0000


<6>[    0.960083] mdss_fb_alloc_fbmem_iommu: allocating 16711680 bytes at c7000000 (7ee00000 phys) for fb 0


<6>[    0.960179] mdss_fb_register: FrameBuffer[0] 1080x1920 size=16711680 registered successfully!


<7>[    0.960258] Registered led device: lcd-backlight


<6>[    0.960369] mdss_fb_register: FrameBuffer[1] 640x480 size=0 registered successfully!


<6>[    0.960552] mdss_fb_register: FrameBuffer[2] 1920x1080 size=0 registered successfully!


<3>[    0.984829] sps: BAM device 0xf9944000 is not registered yet.


<6>[    0.984842] sps:BAM 0xf9944000 is registered.


<6>[    0.984846] msm_serial_hs: BAM device registered. bam_handle=0x0


<6>[    0.987410] f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART


<6>[    0.989221] msm_serial_hs module loaded


<6>[    0.989393] msm_serial_hsl_probe: detected port #0 (ttyHSL0)


<6>[    0.989496] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM


<6>[    0.990982] msm_hsl_console_setup: console setup on port #0


<6>[    2.947557] console [ttyHSL0] enabled


<6>[    2.951439] msm_serial_hsl_init: driver initialized


<6>[    2.959483] diagchar initialized nowkgsl bus ib [0] = 1600000000


<4>[    2.965053] kgsl bus ib [1] = 2456000000


<4>[    2.968980] kgsl bus ib [2] = 3680000000


<4>[    2.972865] kgsl bus ib [3] = 4912000000


<4>[    2.976787] kgsl bus ib [4] = 6400000000


<4>[    2.980677] kgsl bus ib [5] = 7464000000


<4>[    2.984583] kgsl bus index is 5 for pwrlevel 0


<4>[    2.989026] kgsl bus index is 4 for pwrlevel 1


<4>[    2.993437] kgsl bus index is 3 for pwrlevel 2


<4>[    2.997881] kgsl bus index is 2 for pwrlevel 3


<4>[    3.002292] kgsl bus index is 1 for pwrlevel 4


<6>[    3.007416] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU


<4>[    3.015926] kgsl: num bus is 6


<6>[    3.022979] brd: module loaded


<6>[    3.027128] loop: module loaded


<7>[    3.029653] gpio_request: gpio-86 (haptic_en_gpio) status -16


<3>[    3.029660] isa1200 0-0048: isa1200_probe: gpio 86 request failed


<4>[    3.035722] isa1200: probe of 0-0048 failed with error -16


<4>[    3.040785] i2c-core: driver [isa1200] using legacy suspend method


<4>[    3.046949] i2c-core: driver [isa1200] using legacy resume method


<4>[    3.053291] QSEECOM: qseecom_probe: bam_pipe_pair=0x2


<4>[    3.057887] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0


<4>[    3.063424] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1


<4>[    3.069028] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000


<4>[    3.077136] i2c-core: driver [tabla-i2c-core] using legacy suspend method


<4>[    3.083474] i2c-core: driver [tabla-i2c-core] using legacy resume method


<4>[    3.090252] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method


<4>[    3.097120] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method


<6>[    3.104409] SCSI Media Changer driver v0.25 


<6>[    3.108840] sps:BAM 0xf9944000 (va:0xc5e80000) enabled: ver:0x13, number of pipes:24


<6>[    3.116253] spi_qsd f9966000.spi: master is unqueued, this is deprecated


<3>[    3.123076] sps: BAM device 0xf9904000 is not registered yet.


<6>[    3.128379] sps:BAM 0xf9904000 is registered.


<6>[    3.132827] sps:BAM 0xf9904000 (va:0xc5f00000) enabled: ver:0x13, number of pipes:24


<6>[    3.140719] spi_qsd f9923000.spi: master is unqueued, this is deprecated


<6>[    3.151346] tun: Universal TUN/TAP device driver, 1.6


<6>[    3.155351] tun: (C) 1999-2004 Max Krasnyansky


<6>[    3.161588] rmnet_init: BAM devices[9]


<6>[    3.169799] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).


<6>[    3.178427] CSLIP: code copyright 1989 Regents of the University of California.


<6>[    3.185931] wcnss_wlan probed in built-in mode


<6>[    3.191242] usbcore: registered new interface driver asix


<6>[    3.195661] usbcore: registered new interface driver cdc_ether


<6>[    3.201446] usbcore: registered new interface driver net1080


<6>[    3.207096] usbcore: registered new interface driver cdc_subset


<6>[    3.212988] usbcore: registered new interface driver zaurus


<6>[    3.218675] usbcore: registered new interface driver cdc_ncm


<6>[    3.482201] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver


<6>[    3.500558] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC


<6>[    3.507026] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1


<6>[    3.545451] msm_hsic_host msm_hsic_host: irq 168, io mem 0xf9a00000


<6>[    3.565428] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00


<6>[    3.570763] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002


<6>[    3.577436] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1


<6>[    3.584623] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC


<6>[    3.591237] usb usb1: Manufacturer: Linux 3.4.0-g0595304-dirty ehci_hcd


<6>[    3.597834] usb usb1: SerialNumber: msm_hsic_host


<6>[    3.602747] hub 1-0:1.0: USB hub found


<6>[    3.606270] hub 1-0:1.0: 1 port detected


<6>[    3.611495] usbcore: registered new interface driver cdc_acm


<6>[    3.616161] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters


<6>[    3.624109] Initializing USB Mass Storage driver...


<6>[    3.629022] usbcore: registered new interface driver usb-storage


<6>[    3.634944] USB Mass Storage support registered.


<6>[    3.639595] usbcore: registered new interface driver ums-alauda


<6>[    3.645488] usbcore: registered new interface driver ums-cypress


<6>[    3.651463] usbcore: registered new interface driver ums-datafab


<6>[    3.657468] usbcore: registered new interface driver ums_eneub6250


<6>[    3.663615] usbcore: registered new interface driver ums-freecom


<6>[    3.669621] usbcore: registered new interface driver ums-isd200


<6>[    3.675524] usbcore: registered new interface driver ums-jumpshot


<6>[    3.681592] usbcore: registered new interface driver ums-karma


<6>[    3.687417] usbcore: registered new interface driver ums-onetouch


<6>[    3.693477] usbcore: registered new interface driver ums-sddr09


<6>[    3.699397] usbcore: registered new interface driver ums-sddr55


<6>[    3.705283] usbcore: registered new interface driver ums-usbat


<6>[    3.715465] usbcore: registered new interface driver usb_ehset_test


<6>[    3.721211] mbim_init: initialize 1 instances


<6>[    3.725077] mbim_init: Initialized 1 ports


<6>[    3.730288] rndis_qc_init: initialize rndis QC instance


<6>[    3.734844]  gadget: Mass Storage Function, version: 2009/09/11


<6>[    3.740390]  gadget: Number of LUNs=1


<6>[    3.744016]  lun0: LUN: removable file: (no medium)


<6>[    3.749084]  gadget: android_usb ready


<6>[    3.753814] mousedev: PS/2 mouse device common for all mice


<6>[    3.758580] usbcore: registered new interface driver xpad


<6>[    3.764255] input: ft5x06_ts as /devices/f9924000.i2c/i2c-2/2-0038/input/input0


<6>[    3.955667] ft5x06_ts 2-0038: Device ID = 0x8


<3>[    3.958978] ft5x06_ts 2-0038: ft5x06_ts_probe:Unsupported controller


<6>[    3.965631] ft5x06_ts 2-0038: report rate = 200Hz


<6>[    3.970297] ft5x06_ts 2-0038: Firmware version = 0x5


<4>[    3.975097] author  uc_host_fm_ver=0x7  uc_tp_fm_ver=0x5 


<4>[    3.980262] author  firmware Update  begin ! 


<3>[    3.984498] ft5x06_ts 2-0038: Cannot get upgrade information!


<3>[    3.990246] ft5x06_ts 2-0038: fts_ctpm_fw_upgrade_with_i_file:upgrade failed. err.


<3>[    3.997797] [FTS] upgrade failed ret=-22.


<6>[    4.002396] using rtc device, qpnp_rtc, for alarms


<6>[    4.006419] qcom,qpnp-rtc qpnp-rtc-f614a600: rtc core: registered qpnp_rtc as rtc0


<6>[    4.014226] i2c /dev entries driver


<6>[    4.019035] ocmem: Notifier registered for 1


<7>[    4.022360] msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree


<7>[    4.022365] msm_vidc: 1: no elements in frequency table


<7>[    4.022370] msm_vidc: 1: Failed to read qcom,reg-presets from device tree


<7>[    4.022428] msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree


<7>[    4.022438] msm_vidc: 1: Q6 hfi device probe called


<7>[    4.022627] msm_vidc: 1: debugfs_create_file: fail


<3>[    4.024589] msm_cci_probe: pdev f612bc00 device id = -1


<6>[    4.032872] imx135_init_module:141


<3>[    4.035551] msm_sensor_platform_probe called data c0fa24b0


<3>[    4.040696] msm_sensor_platform_probe pdev name (null)


<3>[    4.045884] msm_sensor_get_dt_data qcom,sensor-name imx135, rc 0


<3>[    4.051809] msm_sensor_get_dt_data qcom,sensor-mode 0, rc 0


<3>[    4.057382] msm_sensor_get_dt_data qcom,sensor-position 0, rc 0


<3>[    4.063266] msm_sensor_get_dt_data qcom,mount-angle 270, rc 0


<3>[    4.069013] msm_sensor_get_dt_data qcom,cci-master 0, rc 0


<3>[    4.074466] msm_sensor_get_sub_module_index qcom,actuator cell index 1, rc 0


<3>[    4.081513] msm_sensor_get_sub_module_index:86 eeprom src_node NULL


<3>[    4.087765] msm_sensor_get_sub_module_index:115 src_node NULL


<3>[    4.093477] msm_sensor_get_sub_module_index csiphy_core[0] = 0


<3>[    4.099309] msm_sensor_get_sub_module_index csid_core[0] = 0


<3>[    4.104934] msm_sensor_get_dt_csi_data qcom,csi-lane-assign 4320, rc 0


<3>[    4.111460] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 1f, rc 0


<3>[    4.117623] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 4


<3>[    4.123770] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig


<3>[    4.129602] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vio


<3>[    4.135314] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vana


<3>[    4.141147] msm_sensor_get_dt_vreg_data reg_name[3] = cam_vaf


<3>[    4.146877] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0


<3>[    4.152501] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 1


<3>[    4.158162] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 0


<3>[    4.163785] msm_sensor_get_dt_vreg_data cam_vreg[3].type = 0


<3>[    4.169446] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1225000


<3>[    4.176216] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 0


<3>[    4.182448] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 2850000


<3>[    4.189237] msm_sensor_get_dt_vreg_data cam_vreg[3].min_voltage = 3000000


<3>[    4.196009] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1225000


<3>[    4.202762] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 0


<3>[    4.209028] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 2850000


<3>[    4.215799] msm_sensor_get_dt_vreg_data cam_vreg[3].max_voltage = 3000000


<3>[    4.222554] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 105000


<3>[    4.228906] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 0


<3>[    4.234792] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 80000


<3>[    4.241059] msm_sensor_get_dt_vreg_data cam_vreg[3].op_mode = 100000


<3>[    4.247433] msm_sensor_get_dt_data gpio count 2


<3>[    4.251903] msm_sensor_get_dt_data gpio_array[0] = 15


<3>[    4.256960] msm_sensor_get_dt_data gpio_array[1] = 90


<3>[    4.261966] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 15


<3>[    4.268664] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 90


<3>[    4.275333] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1


<3>[    4.282031] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0


<3>[    4.288717] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK


<3>[    4.296220] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET1


<3>[    4.303632] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[0].gpio = 90


<3>[    4.310331] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[1].gpio = 90


<3>[    4.317016] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[0].flags = 0


<3>[    4.323682] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[1].flags = 2


<3>[    4.330383] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[0].delay = 1000


<3>[    4.337327] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[1].delay = 30000


<3>[    4.344344] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 90


<3>[    4.349924] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22


<3>[    4.356947] msm_sensor_get_dt_data qcom,misc_regulator (null), rc -22


<3>[    4.363353] msm_sensor_power_up:972


<3>[    4.366851] msm_sensor_power_up index 0


<3>[    4.370642] msm_sensor_power_up type 2


<3>[    4.374789] msm_sensor_power_up index 1


<3>[    4.378214] msm_sensor_power_up type 2


<3>[    4.382257] msm_sensor_power_up index 2


<3>[    4.385766] msm_sensor_power_up type 2


<3>[    4.391184] msm_sensor_power_up index 3


<3>[    4.393971] msm_sensor_power_up type 2


<3>[    4.397980] msm_sensor_power_up index 4


<3>[    4.401524] msm_sensor_power_up type 1


<3>[    4.407281] msm_sensor_power_up index 5


<3>[    4.410069] msm_sensor_power_up type 1


<3>[    4.445428] msm_sensor_power_up index 6


<3>[    4.448217] msm_sensor_power_up type 1


<3>[    4.453970] msm_sensor_power_up index 7


<3>[    4.456776] msm_sensor_power_up type 1


<3>[    4.495427] msm_sensor_power_up index 8


<3>[    4.498215] msm_sensor_power_up type 0


<3>[    4.504003] msm_sensor_power_up index 9


<3>[    4.506809] msm_sensor_power_up type 3


<3>[    4.511183] msm_sensor_match_id: read id: 135 expected id 135:


<3>[    4.516357] msm_sensor_power_up exit


<3>[    4.519898] msm_sensor_platform_probe imx135 probe succeeded


<3>[    4.525730] msm_sensor_platform_probe rc 0 session_id 1


<3>[    4.530806] msm_sensor_platform_probe:1878


<3>[    4.534830] msm_sensor_power_down:1142


<3>[    4.538614] msm_sensor_power_down index 9


<3>[    4.542555] msm_sensor_power_down type 3


<3>[    4.546517] msm_sensor_power_down index 8


<3>[    4.550454] msm_sensor_power_down type 0


<3>[    4.556391] msm_sensor_power_down index 7


<3>[    4.559353] msm_sensor_power_down type 1


<3>[    4.595427] msm_sensor_power_down index 6


<3>[    4.598388] msm_sensor_power_down type 1


<3>[    4.604316] msm_sensor_power_down index 5


<3>[    4.607295] msm_sensor_power_down type 1


<3>[    4.645427] msm_sensor_power_down index 4


<3>[    4.648387] msm_sensor_power_down type 1


<3>[    4.654317] msm_sensor_power_down index 3


<3>[    4.657295] msm_sensor_power_down type 2


<3>[    4.661402] msm_sensor_power_down index 2


<3>[    4.665178] msm_sensor_power_down type 2


<3>[    4.669341] msm_sensor_power_down index 1


<3>[    4.673078] msm_sensor_power_down type 2


<3>[    4.677215] msm_sensor_power_down index 0


<3>[    4.680976] msm_sensor_power_down type 2


<3>[    4.685171] msm_sensor_power_down exit


<3>[    4.688637] msm_sensor_platform_probe:1881


<6>[    4.692713] ov5648_init_module:160


<3>[    4.696411] msm_sensor_platform_probe called data c0fa2830


<3>[    4.701549] msm_sensor_platform_probe pdev name (null)


<3>[    4.706692] msm_sensor_get_dt_data qcom,sensor-name ov5648_oty5f03, rc 0


<3>[    4.713357] msm_sensor_get_dt_data qcom,sensor-mode 1, rc 0


<3>[    4.718929] msm_sensor_get_dt_data qcom,sensor-position 1, rc 0


<3>[    4.724815] msm_sensor_get_dt_data qcom,mount-angle 90, rc 0


<3>[    4.730478] msm_sensor_get_dt_data qcom,cci-master 1, rc 0


<3>[    4.735945] msm_sensor_get_sub_module_index:69 src_node NULL


<3>[    4.741569] msm_sensor_get_sub_module_index:86 eeprom src_node NULL


<3>[    4.747838] msm_sensor_get_sub_module_index:115 src_node NULL


<3>[    4.753549] msm_sensor_get_sub_module_index csiphy_core[0] = 2


<3>[    4.759382] msm_sensor_get_sub_module_index csid_core[0] = 2


<3>[    4.765007] msm_sensor_get_dt_csi_data qcom,csi-lane-assign 4320, rc 0


<3>[    4.771539] msm_sensor_get_dt_csi_data qcom,csi-lane-mask 7, rc 0


<3>[    4.777608] msm_sensor_get_dt_vreg_data qcom,cam-vreg-name count 3


<3>[    4.783755] msm_sensor_get_dt_vreg_data reg_name[0] = cam_vdig


<3>[    4.789588] msm_sensor_get_dt_vreg_data reg_name[1] = cam_vana


<3>[    4.795386] msm_sensor_get_dt_vreg_data reg_name[2] = cam_vio


<3>[    4.801169] msm_sensor_get_dt_vreg_data cam_vreg[0].type = 0


<3>[    4.806776] msm_sensor_get_dt_vreg_data cam_vreg[1].type = 0


<3>[    4.812400] msm_sensor_get_dt_vreg_data cam_vreg[2].type = 1


<3>[    4.818060] msm_sensor_get_dt_vreg_data cam_vreg[0].min_voltage = 1500000


<3>[    4.824813] msm_sensor_get_dt_vreg_data cam_vreg[1].min_voltage = 2850000


<3>[    4.831601] msm_sensor_get_dt_vreg_data cam_vreg[2].min_voltage = 0


<3>[    4.837853] msm_sensor_get_dt_vreg_data cam_vreg[0].max_voltage = 1500000


<3>[    4.844604] msm_sensor_get_dt_vreg_data cam_vreg[1].max_voltage = 2850000


<3>[    4.851394] msm_sensor_get_dt_vreg_data cam_vreg[2].max_voltage = 0


<3>[    4.857644] msm_sensor_get_dt_vreg_data cam_vreg[0].op_mode = 105000


<3>[    4.863963] msm_sensor_get_dt_vreg_data cam_vreg[1].op_mode = 80000


<3>[    4.870229] msm_sensor_get_dt_vreg_data cam_vreg[2].op_mode = 0


<3>[    4.876196] msm_sensor_get_dt_data gpio count 3


<3>[    4.880637] msm_sensor_get_dt_data gpio_array[0] = 17


<3>[    4.885697] msm_sensor_get_dt_data gpio_array[1] = 18


<3>[    4.890720] msm_sensor_get_dt_data gpio_array[2] = 89


<3>[    4.895755] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 17


<3>[    4.902418] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 18


<3>[    4.909119] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 89


<3>[    4.915804] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1


<3>[    4.922469] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0


<3>[    4.929172] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0


<3>[    4.935856] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK


<3>[    4.943304] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET1


<3>[    4.950788] msm_sensor_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_STANDBY


<3>[    4.958343] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[0].gpio = 18


<3>[    4.965004] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[1].gpio = 18


<3>[    4.971707] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[0].flags = 0


<3>[    4.978389] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[1].flags = 2


<3>[    4.985058] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[0].delay = 1000


<3>[    4.992018] msm_sensor_get_dt_gpio_set_tbl cam_gpio_set_tbl[1].delay = 30000


<3>[    4.999052] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 18


<3>[    5.004590] msm_sensor_init_gpio_pin_tbl qcom,gpio-reset 89


<3>[    5.010167] msm_sensor_get_dt_actuator_data qcom,actuator-cam-name 0, rc -22


<3>[    5.017194] msm_sensor_get_dt_data qcom,misc_regulator qcom,vdd-cx, rc 0


<3>[    5.023861] msm_sensor_power_up:972


<3>[    5.027361] msm_sensor_power_up index 0


<3>[    5.031149] msm_sensor_power_up type 2


<3>[    5.035175] msm_sensor_power_up index 1


<3>[    5.038720] msm_sensor_power_up type 1


<3>[    5.048456] msm_sensor_power_up index 2


<3>[    5.051245] msm_sensor_power_up type 1


<3>[    5.061001] msm_sensor_power_up index 3


<3>[    5.063789] msm_sensor_power_up type 2


<3>[    5.075255] msm_sensor_power_up index 4


<3>[    5.078062] msm_sensor_power_up type 1


<3>[    5.087800] msm_sensor_power_up index 5


<3>[    5.090588] msm_sensor_power_up type 1


<3>[    5.105343] msm_sensor_power_up index 6


<3>[    5.108150] msm_sensor_power_up type 1


<3>[    5.117887] msm_sensor_power_up index 7


<3>[    5.120675] msm_sensor_power_up type 1


<3>[    5.135430] msm_sensor_power_up index 8


<3>[    5.138218] msm_sensor_power_up type 0


<3>[    5.153001] msm_sensor_power_up index 9


<3>[    5.155806] msm_sensor_power_up type 3


<3>[    5.160176] msm_sensor_match_id: read id: 5648 expected id 5648:


<3>[    5.165529] msm_sensor_power_up exit


<3>[    5.169070] msm_sensor_platform_probe ov5648_oty5f03 probe succeeded


<3>[    5.175570] msm_sensor_platform_probe rc 0 session_id 2


<3>[    5.180680] msm_sensor_platform_probe:1878


<3>[    5.184694] msm_sensor_power_down:1142


<3>[    5.188479] msm_sensor_power_down index 9


<3>[    5.192421] msm_sensor_power_down type 3


<3>[    5.196344] msm_sensor_power_down index 8


<3>[    5.200320] msm_sensor_power_down type 0


<3>[    5.215257] msm_sensor_power_down index 7


<3>[    5.218235] msm_sensor_power_down type 1


<3>[    5.233149] msm_sensor_power_down index 6


<3>[    5.236127] msm_sensor_power_down type 1


<3>[    5.246039] msm_sensor_power_down index 5


<3>[    5.249001] msm_sensor_power_down type 1


<3>[    5.263931] msm_sensor_power_down index 4


<3>[    5.266909] msm_sensor_power_down type 1


<3>[    5.276822] msm_sensor_power_down index 3


<3>[    5.279783] msm_sensor_power_down type 2


<3>[    5.289948] msm_sensor_power_down index 2


<3>[    5.292909] msm_sensor_power_down type 1


<3>[    5.302890] msm_sensor_power_down index 1


<3>[    5.305870] msm_sensor_power_down type 1


<3>[    5.315782] msm_sensor_power_down index 0


<3>[    5.318742] msm_sensor_power_down type 2


<3>[    5.322869] msm_sensor_power_down exit


<3>[    5.326402] msm_sensor_platform_probe:1881


<3>[    5.331866] __msm_jpeg_init:946] Jpeg Device id 0


<3>[    5.335648] __msm_jpeg_init:946] Jpeg Device id 1


<3>[    5.340339] __msm_jpeg_init:946] Jpeg Device id 2


<6>[    5.361781] lirc_dev: IR Remote Control driver registered, author 235 


<6>[    5.367372] IR NEC protocol handler initialized


<6>[    5.371863] IR RC5(x) protocol handler initialized


<6>[    5.376655] IR RC6 protocol handler initialized


<6>[    5.381151] IR JVC protocol handler initialized


<6>[    5.385681] IR Sony protocol handler initialized


<6>[    5.390266] IR RC5 (streamzap) protocol handler initialized


<6>[    5.395838] IR SANYO protocol handler initialized


<6>[    5.400508] IR MCE Keyboard/mouse protocol handler initialized


<6>[    5.406341] IR LIRC bridge handler initialized


<6>[    5.410820] usbcore: registered new interface driver uvcvideo


<6>[    5.416499] USB Video Class driver (1.1.1)


<6>[    5.421010] bq28400_init:  bq28400 driver rev 1.0.


<6>[    5.425366] BMS: qpnp_bms_init: QPNP BMS INIT


<6>[    5.429838] spmi qpnp-charger-f614a000: Driver qcom,qpnp-charger requests probe deferral


<6>[    5.489451] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]


<6>[    5.496961] Bluetooth: HCI UART driver ver 2.2


<6>[    5.501267] Bluetooth: HCIATH3K protocol initialized


<6>[    5.507389] cpuidle: using governor ladder


<6>[    5.510440] cpuidle: using governor menu


<6>[    5.514367] sdhci: Secure Digital Host Controller Interface driver


<6>[    5.520527] sdhci: Copyright(c) Pierre Ossman


<6>[    5.525194] sdhci-pltfm: SDHCI platform and OF driver helper


<6>[    5.534421] mmc0: no vmmc regulator found


<7>[    5.538491] Registered led device: mmc0::


<6>[    5.539663] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA


<6>[    5.549448] mmc1: no vmmc regulator found


<7>[    5.553470] Registered led device: mmc1::


<6>[    5.554623] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA


<7>[    5.560745] Registered led device: led:rgb_red


<7>[    5.560843] Registered led device: led:rgb_green


<7>[    5.560941] Registered led device: led:rgb_blue


<3>[    5.561008] qcom,leds-qpnp leds-qpnp-f614b600: Regulator get failed(-517)


<3>[    5.567066] qcom,leds-qpnp leds-qpnp-f614b600: Unable to read flash config data


<6>[    5.574348] spmi leds-qpnp-f614b600: Driver qcom,leds-qpnp requests probe deferral


<7>[    5.582493] Registered led device: wled:backlight


<7>[    5.582781] Registered led device: kpdbl-pwm-1


<7>[    5.583119] Registered led device: kpdbl-lut-2


<7>[    5.583280] Registered led device: kpdbl-pwm-3


<7>[    5.583440] Registered led device: kpdbl-pwm-4


<4>[    5.583743] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1


<4>[    5.588564] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000  


<4>[    5.595490] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc5f40000


<4>[    5.602504] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000  


<4>[    5.609637] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.


<6>[    5.616454] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000


<6>[    5.622818] qce qcedev.0: IO base, CE = 0xc5f40000


<6>[    5.622820] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3


<6>[    5.622822] IO base BAM = 0x0


<6>[    5.622823] BAM IRQ 268


<6>[    5.638677] sps:BAM 0xfd444000 is registered.


<6>[    5.642988] sps:BAM 0xfd444000 (va:0xc5e70000) enabled: ver:0x20, number of pipes:8


<6>[    5.650918] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268


<6>[    5.658865] usbcore: registered new interface driver usbhid


<6>[    5.658971] mmc0: BKOPS_EN bit = 0


<6>[    5.667190] usbhid: USB HID core driver


<6>[    5.668801] mmc0: new HS200 MMC card at address 0001


<6>[    5.676024] mmcblk0: mmc0:0001 016G92 14.6 GiB 


<6>[    5.676325] ashmem: initialized


<6>[    5.676377] logger: created 256K log 'log_main'


<6>[    5.676426] logger: created 256K log 'log_events'


<6>[    5.676486] logger: created 256K log 'log_radio'


<6>[    5.676535] logger: created 256K log 'log_system'


<6>[    5.702210] sps:BAM 0xf9304000 is registered.


<6>[    5.706288] mmcblk0rpmb: mmc0:0001 016G92 partition 3 512 KiB


<6>[    5.706310] sps:BAM 0xf9a44000 is registered.


<3>[    5.706331] usb_bam_ipa_create_resources: Failed to create USB_PROD resource


<6>[    5.706661] PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'cold' boot


<6>[    5.706878] input: qpnp_pon as /devices/virtual/input/input1


<6>[    5.707893] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm


<6>[    5.708024] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2


<6>[    5.708103] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0


<6>[    5.708316] coresight-fuse fc4be024.fuse: Fuse initialized


<6>[    5.761933] coresight-cti fc308000.cti: CTI initialized


<6>[    5.767060] coresight-cti fc309000.cti: CTI initialized


<6>[    5.768480]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20


<6>[    5.780664] coresight-cti fc30a000.cti: CTI initialized


<6>[    5.785865] coresight-cti fc30b000.cti: CTI initialized


<6>[    5.791064] coresight-cti fc30c000.cti: CTI initialized


<6>[    5.796279] coresight-cti fc30d000.cti: CTI initialized


<6>[    5.801478] coresight-cti fc30e000.cti: CTI initialized


<6>[    5.806695] coresight-cti fc30f000.cti: CTI initialized


<6>[    5.811894] coresight-cti fc310000.cti: CTI initialized


<6>[    5.817110] coresight-cti fc340000.cti: CTI initialized


<6>[    5.822320] coresight-cti fc341000.cti: CTI initialized


<6>[    5.827531] coresight-cti fc342000.cti: CTI initialized


<6>[    5.832729] coresight-cti fc343000.cti: CTI initialized


<6>[    5.837972] coresight-cti fc344000.cti: CTI initialized


<6>[    5.843147] coresight-cti fc348000.cti: CTI initialized


<6>[    5.848372] coresight-cti fc34d000.cti: CTI initialized


<6>[    5.853569] coresight-cti fc350000.cti: CTI initialized


<6>[    5.858790] coresight-cti fc354000.cti: CTI initialized


<6>[    5.863970] coresight-cti fc358000.cti: CTI initialized


<6>[    5.869533] coresight-csr fc302000.csr: CSR initialized


<6>[    5.876622] coresight-tmc fc322000.tmc: Byte Counter feature enabled


<6>[    5.881958] sps:BAM 0xfc37c000 is registered.


<6>[    5.886285] coresight-tmc fc322000.tmc: TMC initialized


<6>[    5.891871] coresight-tmc fc307000.tmc: TMC initialized


<6>[    5.902300] coresight-tpiu fc318000.tpiu: TPIU initialized


<6>[    5.907189] coresight-funnel fc31b000.funnel: FUNNEL initialized


<6>[    5.912824] coresight-funnel fc319000.funnel: FUNNEL initialized


<6>[    5.918824] coresight-funnel fc31a000.funnel: FUNNEL initialized


<6>[    5.924803] coresight-funnel fc345000.funnel: FUNNEL initialized


<6>[    5.930800] coresight-funnel fc364000.funnel: FUNNEL initialized


<6>[    5.937095] coresight-replicator fc31c000.replicator: REPLICATOR initialized


<6>[    5.944213] coresight-stm fc321000.stm: STM initialized


<6>[    5.949351] coresight-hwevent fdf30018.hwevent: Hardware Event driver initialized


<6>[    5.956938] coresight-etm fc33c000.etm: ETM initialized


<6>[    5.961609] coresight-etm fc33c000.etm: PC save enabled


<6>[    5.967024] coresight-etm fc33d000.etm: ETM initialized


<6>[    5.972024] coresight-etm fc33d000.etm: PC save enabled


<6>[    5.977435] coresight-etm fc33e000.etm: ETM initialized


<6>[    5.982438] coresight-etm fc33e000.etm: PC save enabled


<6>[    5.987866] coresight-etm fc33f000.etm: ETM initialized


<6>[    5.992858] coresight-etm fc33f000.etm: PC save enabled


<6>[    5.998467] coresight-audio-etm audio_etm0.0: Audio ETM initialized


<6>[    6.004698] coresight-modem-etm modem_etm0.1: Modem ETM initialized


<6>[    6.010951] coresight-wcn-etm wcn_etm0.2: Wireless ETM initialized


<6>[    6.017127] coresight-rpm-etm rpm_etm0.3: RPM ETM initialized


<6>[    6.022938] usbcore: registered new interface driver snd-usb-audio


<6>[    6.037919] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp


<6>[    6.044785] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa


<6>[    6.051987] platform qcom,msm-voip-dsp.48: Driver msm-voip-dsp requests probe deferral


<6>[    6.059305] platform qcom,msm-pcm-voice.49: Driver msm-pcm-voice requests probe deferral


<6>[    6.069664] ocmem: Notifier registered for 5


<6>[    6.073535] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present


<6>[    6.082555] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral


<6>[    6.091746] oprofile: using arm/armv7-krait


<6>[    6.094986] u32 classifier


<6>[    6.097594]     Actions configured


<6>[    6.100962] Netfilter messages via NETLINK v0.30.


<6>[    6.105709] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)


<6>[    6.112267] ctnetlink v0.93: registering with nfnetlink.


<6>[    6.117391] NF_TPROXY: Transparent proxy support initialized, version 4.1.0


<6>[    6.123962] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.


<6>[    6.129980] xt_time: kernel timezone is -0000


<6>[    6.134478] ip_tables: (C) 2000-2006 Netfilter Core Team


<6>[    6.139703] arp_tables: (C) 2002 David S. Miller


<6>[    6.144071] TCP: cubic registered


<6>[    6.147335] Initializing XFRM netlink socket


<6>[    6.152101] NET: Registered protocol family 10


<6>[    6.158375] Mobile IPv6


<6>[    6.159798] ip6_tables: (C) 2000-2006 Netfilter Core Team


<6>[    6.165308] IPv6 over IPv4 tunneling driver


<6>[    6.169829] NET: Registered protocol family 17


<5>[    6.173812] Bridge firewalling registered


<6>[    6.177773] Ebtables v2.0 registered


<6>[    6.181505] Bluetooth: RFCOMM TTY layer initialized


<6>[    6.186199] Bluetooth: RFCOMM socket layer initialized


<6>[    6.191285] Bluetooth: RFCOMM ver 1.11


<6>[    6.195019] Bluetooth: BNEP (Ethernet Emulation) ver 1.3


<6>[    6.200332] Bluetooth: BNEP filters: protocol multicast


<6>[    6.205540] Bluetooth: HIDP (Human Interface Emulation) ver 1.2


<6>[    6.211704] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1


<5>[    6.219184] Registering SWP/SWPB emulation handler


<6>[    6.242673] gdsc_oxili_gx: disabling


<6>[    6.245219] gdsc_mdss: disabling


<6>[    6.248463] gdsc_venus: disabling


<6>[    6.252244] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral


<6>[    6.252332] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present


<6>[    6.252659] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral


<3>[    6.253395] qcom,leds-qpnp leds-qpnp-f614b600: Regulator get failed(-517)


<3>[    6.253401] qcom,leds-qpnp leds-qpnp-f614b600: Unable to read flash config data


<6>[    6.253417] spmi leds-qpnp-f614b600: Driver qcom,leds-qpnp requests probe deferral


<6>[    6.254004] 8941_smbb_otg: 


<6>[    6.254032] 8941_smbb_otg: supplied by 8941_boost


<6>[    6.254412] 8941_smbb_boost: 5000 mV 


<6>[    6.255479] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 7


<6>[    6.255657] usb2_otg_sw: 


<6>[    6.255680] usb2_otg_sw: supplied by 8941_boost


<6>[    6.256051] ethernet_phy: 


<7>[    6.329286] gpio_set_debounce: gpio-412 status -22


<7>[    6.329365] gpio_set_debounce: gpio-409 status -22


<6>[    6.329577] input: gpio-keys as /devices/gpio_keys.80/input/input2


<6>[    6.335194] qcom,qpnp-rtc qpnp-rtc-f614a600: setting system clock to 1970-01-01 00:00:12 UTC (12)


<6>[    6.344625] clock_late_init: Removing enables held for handed-off clocks


<6>[    6.345576] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5


<3>[    6.345661] qcom,qpnp-bsi qpnp-bsi-f6149600: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5


<6>[    6.345778] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5


<3>[    6.345860] qcom,qpnp-bsi qpnp-bsi-f6149600: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5


<6>[    6.345975] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5


<3>[    6.346057] qcom,qpnp-bsi qpnp-bsi-f6149600: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5


<6>[    6.346172] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5


<3>[    6.346253] qcom,qpnp-bsi qpnp-bsi-f6149600: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5


<6>[    6.346369] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5


<3>[    6.346448] qcom,qpnp-bsi qpnp-bsi-f6149600: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5


<3>[    6.346454] bif_add_all_slaves: BIF bus_transaction failed, rc=-5


<6>[    6.346477] bif_ctrl_register: Battery pack present = Y


<6>[    6.350863] bif_ctrl_register: Battery pack type = unknown (Rid=327 ohm)


<6>[    6.351093] 8941_mvs1: 


<6>[    6.351116] 8941_mvs1: supplied by 8941_smbb_otg


<6>[    6.351613] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present


<6>[    6.352011] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral


<7>[    6.352513] Registered led device: led:flash_0


<7>[    6.352865] Registered led device: led:flash_1


<7>[    6.353086] Registered led device: led:flash_torch


<6>[    6.353343] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral


<6>[    6.353634] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present


<6>[    6.353914] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral


<4>[    6.502341] dsi_pll_disable: mdss GDSC disabled before disabling DSI PLL


<6>[    6.512507] ALSA device list:


<6>[    6.514434]   No soundcards found.


<6>[    6.518532] Freeing init memory: 88K


<6>[    6.525594] msm-dwc3 msm_dwc3: DWC3 in low power mode


<7>[    6.530865] SELinux: 512 avtab hash slots, 1320 rules.


<7>[    6.531537] SELinux: 512 avtab hash slots, 1320 rules.


<7>[    6.531560] SELinux:  1 users, 2 roles, 288 types, 1 bools, 1 sens, 1024 cats


<7>[    6.531572] SELinux:  84 classes, 1320 rules


<7>[    6.532910] SELinux:  Completing initialization.


<7>[    6.532916] SELinux:  Setting up existing superblocks.


<7>[    6.532944] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts


<7>[    6.532971] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts


<7>[    6.533136] SELinux: initialized (dev bdev, type bdev), not configured for labeling


<7>[    6.533152] SELinux: initialized (dev proc, type proc), uses genfs_contexts


<7>[    6.533199] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs


<7>[    6.533229] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts


<7>[    6.554045] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs


<7>[    6.554081] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs


<7>[    6.554105] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling


<7>[    6.554126] SELinux: initialized (dev devpts, type devpts), uses transition SIDs


<7>[    6.554169] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts


<7>[    6.554354] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs


<7>[    6.554407] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts


<5>[    6.569399] type=1403 audit(12.730:2): policy loaded auid=4294967295 ses=4294967295


<4>[    6.576469] SELinux: Loaded policy from /sepolicy


<5>[    6.583123] type=1404 audit(12.740:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295


<6>[    7.341527] msm-dwc3 msm_dwc3: DWC3 exited from low power mode


<3>[    9.865269] init: init.target.rc: 236: ignored duplicate definition of service 'ppd'


<4>[    9.872215] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.


<3>[    9.884411] init: invalid uid 'fm_radio'


<3>[   10.258356] init: cannot open '/initlogo.rle'


<7>[   10.425637] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts


<7>[   10.425992] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs


<7>[   10.427859] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs


<7>[   10.428019] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs


<7>[   10.429678] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts


<6>[   10.507115] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1,discard


<7>[   10.515220] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr


<6>[   10.622678] EXT4-fs (mmcblk0p13): recovery complete


<6>[   10.627209] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro


<7>[   10.637143] SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr


<6>[   10.645664] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata


<4>[   10.692029] e2fsck used greatest stack depth: 5392 bytes left


<6>[   10.696804] e2fsck: e2fsck 1.41.14 (22-Dec-2010)


<6>[   10.701374] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 933/655360 files, 94255/2621440 blocks


<6>[   10.720696] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard


<7>[   10.730214] SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr


<4>[   10.730516] init used greatest stack depth: 5364 bytes left


<6>[   10.747669] EXT4-fs (mmcblk0p15): recovery complete


<6>[   10.752152] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1


<7>[   10.759950] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr


<6>[   10.771433] EXT4-fs (mmcblk0p14): recovery complete


<6>[   10.775919] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1


<7>[   10.783696] SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr


<7>[   10.790499] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts


<6>[   10.793469] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x05a00000 to 0x06e00000


<6>[   11.126784] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset


<6>[   11.183450] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received


<6>[   11.206163] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up


<6>[   11.215111] apr_tal:Q6 Is Up


<3>[   11.217201] diag: In diag_send_msg_mask_update, invalid status 0


<6>[   11.217225] adsp-loader qcom,msm-adsp-loader.40: adsp_loader_do: Q6/ADSP image is loaded


<6>[   11.217792] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present


<6>[   11.218852] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral


<3>[   11.248415] diag: In diag_send_log_mask_update, invalid status 0


<6>[   11.249718] taiko-slim taiko-slim-pgd: Platform data from device tree


<6>[   11.249954] taiko-slim taiko-slim-pgd: cdc-vdd-buck: vol=[2150000 2150000]uV, curr=[650000]uA, ond 0


<6>[   11.249981] taiko-slim taiko-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0


<6>[   11.250004] taiko-slim taiko-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0


<6>[   11.250028] taiko-slim taiko-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0


<6>[   11.250054] taiko-slim taiko-slim-pgd: cdc-vdd-a-1p2v: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0


<6>[   11.250078] taiko-slim taiko-slim-pgd: cdc-vddcx-1: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0


<6>[   11.250103] taiko-slim taiko-slim-pgd: cdc-vddcx-2: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0


<6>[   11.250127] taiko-slim taiko-slim-pgd: cdc-vdd-spkdrv: vol=[5000000 5000000]uV, curr=[1250000]uA, ond 1


<3>[   11.305475] ngd_msm_ctrl fe12f000.slim: ADSP slimbus not up yet


<3>[   11.350536] init: Detected MSM SOC ID=218 SOC VER=65536 BOARD TYPE=Surf


<3>[   11.357181] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'


<3>[   11.367355] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'


<6>[   11.380431] Slimbus QMI NGD CB received event:2


<6>[   11.386019] slim_clk_pause: txn-rsp for 0 pending


<5>[   11.389792] type=1400 audit(17.540:4): avc:  denied  { entrypoint } for  pid=197 comm="init" path="/sbin/healthd" dev="rootfs" ino=5710 scontext=u:r:healthd:s0 tcontext=u:object_r:rootfs:s0 tclass=file


<6>[   11.394982] SLIM SAT: Received master capability


<6>[   11.395048] sps:BAM 0xfe104000 (va:0xc8c80000) enabled: ver:0x13, number of pipes:31


<6>[   11.395055] sps:BAM 0xfe104000 is registered.


<3>[   11.403131] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'


<3>[   11.436613] healthd: wakealarm_init: timerfd_create failed


<4>[   11.442347] healthd: BatteryStatusPath not found


<4>[   11.446009] healthd: BatteryHealthPath not found


<6>[   11.449582] warning: `qrngd' uses 32-bit capabilities (legacy support in use)


<4>[   11.457759] healthd: BatteryPresentPath not found


<4>[   11.462358] healthd: BatteryCapacityPath not found


<6>[   11.463187] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0


<6>[   11.466348] slimbus:1 laddr:0xca, EAPC:0x0:0xa0


<4>[   11.476152] healthd: BatteryVoltagePath not found


<6>[   11.477294] taiko-slim taiko-slim-pgd: wcd9xxx_check_codec_type: detected taiko_codec, author 0x102, minor 0x1, ver 0x2


<6>[   11.477306] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4


<6>[   11.481440] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present


<6>[   11.483054] taiko_codec taiko_codec: taiko_codec_probe()


<4>[   11.507937] healthd: BatteryTemperaturePath not found


<4>[   11.512074] healthd: BatteryTechnologyPath not found


<6>[   11.516224] 'opened /dev/adsprpc-smd c 243 0'


<6>[   11.557632] pil-q6v5-mss fc880000.qcom,mss: mba: loading from 0x0d100000 to 0x0d139000


<4>[   11.558461] getprop used greatest stack depth: 5308 bytes left


<3>[   11.572043] init: cannot find '/system/bin/mm-gesture-daemon', disabling 'qgesturesvr'


<7>[   11.593497] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts


<7>[   11.601835] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts


<6>[   11.604385] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok


<6>[   11.605335] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok


<6>[   11.610323] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok


<6>[   11.611752] asoc: snd-soc-dummy-dai <-> VoIP mapping ok


<6>[   11.613285] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok


<6>[   11.617059] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok


<6>[   11.618543] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok


<6>[   11.619790] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok


<6>[   11.620981] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok


<6>[   11.622705] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok


<6>[   11.630505] pil-q6v5-mss fc880000.qcom,mss: mba: Brought out of reset


<3>[   11.636907] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'


<3>[   11.644065] init: powerctl: cannot expand '${sys.powerctl}'


<6>[   11.649654] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok


<6>[   11.650683] asoc: snd-soc-dummy-dai <-> SLIMBUS1_HOSTLESS mapping ok


<3>[   11.652849] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'


<6>[   11.662970] asoc: snd-soc-dummy-dai <-> SLIMBUS3_HOSTLESS mapping ok


<6>[   11.666645] pil-q6v5-mss fc880000.qcom,mss: modem: loading from 0x08000000 to 0x0d100000


<6>[   11.667153] asoc: snd-soc-dummy-dai <-> SLIMBUS4_HOSTLESS mapping ok


<6>[   11.668196] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok


<3>[   11.669309] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'


<6>[   11.675645] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok


<6>[   11.688941] asoc: snd-soc-dummy-dai <-> LSM mapping ok


<3>[   11.690050] init: untracked pid 235 exited


<6>[   11.695318] alarm_set_rtc: Failed to set RTC, time will be lost on reboot


<4>[   11.702635] QSEECOM: qseecom_release: data: released = false, type = 1, data = 0xf373b380


<6>[   11.711715] wcnss_wlan triggered by userspace


<6>[   11.714971] msm_thermal: enabled = 0


<3>[   11.716706] enable_store: android_usb: already disabled


<6>[   11.730196] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok


<6>[   11.731117] asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok


<6>[   11.731917] asoc: snd-soc-dummy-dai <-> MultiMedia8 mapping ok


<6>[   11.733704] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok


<6>[   11.734567] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok


<6>[   11.735544] asoc: snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok


<6>[   11.736523] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok


<6>[   11.737210] asoc: taiko_vifeedback <-> msm-dai-q6-dev.16393 mapping ok


<6>[   11.737862] asoc: taiko_rx2 <-> msm-dai-q6-dev.16388 mapping ok


<6>[   11.738553] asoc: taiko_tx2 <-> msm-dai-q6-dev.16389 mapping ok


<6>[   11.739581] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok


<6>[   11.740718] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok


<6>[   11.741372] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok


<6>[   11.741984] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok


<6>[   11.742590] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok


<6>[   11.743229] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok


<6>[   11.743952] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.1 mapping ok


<6>[   11.744573] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.1 mapping ok


<6>[   11.745245] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.2 mapping ok


<3>[   11.746032] wcnss_trigger_config:  adc get failed


<6>[   11.751007] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.2 mapping ok


<6>[   11.751740] msm_audrx_init(), dev_namemsm-dai-q6-dev.16384


<6>[   11.772108] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x06e00000 to 0x0743e000


<4>[   11.782864] QSEECOM: qseecom_release: data: released = false, type = 1, data = 0xf3761700


<6>[   11.811399] EXT4-fs (mmcblk0p12): re-mounted. Opts: (null)


<6>[   11.963285] EXT4-fs (mmcblk0p12): re-mounted. Opts: (null)


<6>[   12.018182] asoc: taiko_rx1 <-> msm-dai-q6-dev.16384 mapping ok


<6>[   12.020337] asoc: taiko_tx1 <-> msm-dai-q6-dev.16385 mapping ok


<6>[   12.021045] asoc: taiko_rx1 <-> msm-dai-q6-dev.16386 mapping ok


<6>[   12.021984] asoc: taiko_tx1 <-> msm-dai-q6-dev.16387 mapping ok


<6>[   12.022912] asoc: taiko_rx1 <-> msm-dai-q6-dev.16390 mapping ok


<6>[   12.026781] asoc: taiko_tx1 <-> msm-dai-q6-dev.16391 mapping ok


<6>[   12.034830] asoc: taiko_rx1 <-> msm-dai-q6-dev.16392 mapping ok


<6>[   12.037178] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok


<6>[   12.037982] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok


<6>[   12.039022] asoc: taiko_mad1 <-> msm-dai-q6-dev.16395 mapping ok


<6>[   12.039775] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok


<6>[   12.040675] asoc: msm_hdmi_audio_codec_rx_dai <-> msm-dai-q6-hdmi.8 mapping ok


<6>[   12.068053] input: msm8974-taiko-cdp-snd-card Button Jack as /devices/fe02c000.sound/sound/card0/input3


<6>[   12.068334] input: msm8974-taiko-cdp-snd-card Headset Jack as /devices/fe02c000.sound/sound/card0/input4


<6>[   12.219179] pil_pronto fb21b000.qcom,pronto: wcnss: Brought out of reset


<6>[   12.505100] pil_pronto fb21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received


<6>[   12.533695] pil_pronto fb21b000.qcom,pronto: Subsystem error monitoring/handling services are up


<6>[   12.533855] adb_open


<3>[   12.536066] diag: In diag_send_msg_mask_update, invalid status 0


<3>[   12.540913] diag: In diag_send_log_mask_update, invalid status 0


<6>[   12.554090] mdss_hw_init: MDP Rev=10020001


<3>[   12.562317] msm_sensor_config:1292 imx135 cfgtype = 8


<3>[   12.570879] msm_sensor_config:1304 sensor name imx135


<3>[   12.575333] msm_sensor_config:1306 session id 1


<3>[   12.582833] msm_sensor_config:1309 subdev_id[0] -1


<3>[   12.586670] msm_sensor_config:1309 subdev_id[1] -1


<3>[   12.591405] msm_sensor_config:1309 subdev_id[2] 1


<3>[   12.596150] msm_sensor_config:1309 subdev_id[3] -1


<3>[   12.600841] msm_sensor_config:1309 subdev_id[4] -1


<3>[   12.613126] msm_sensor_config:1309 subdev_id[5] -1


<3>[   12.616930] msm_sensor_config:1309 subdev_id[6] 0


<3>[   12.621578] msm_sensor_config:1309 subdev_id[7] -1


<3>[   12.626415] msm_sensor_config:1309 subdev_id[8] 0


<3>[   12.631060] msm_sensor_config:1309 subdev_id[9] -1


<3>[   12.636087] msm_sensor_config:1292 imx135 cfgtype = 9


<3>[   12.642149] msm_sensor_config:1319 init params mode 0 pos 0 mount 270


<6>[   12.642616] dwc3 f9200000.dwc3: Avail curr from USB = 2


<6>[   12.642641] android_work: android_work: did not send uevent (0 0   (null))


<6>[   12.645895] wcnss_wlan_ctrl_probe: SMD ctrl channel up


<6>[   12.646617] wcnss: version 01050102


<6>[   12.646642] wcnss: schedule dnld work for pronto


<6>[   12.646651] wcnss: NV download


<6>[   12.646910] wcnss: build version 00348


<3>[   12.648093] msm_sensor_config:1292 ov5648_oty5f03 cfgtype = 8


<3>[   12.653293] msm_sensor_config:1304 sensor name ov5648_oty5f03


<3>[   12.660398] msm_sensor_config:1306 session id 2


<3>[   12.663898] msm_sensor_config:1309 subdev_id[0] -1


<3>[   12.668733] msm_sensor_config:1309 subdev_id[1] -1


<3>[   12.673458] msm_sensor_config:1309 subdev_id[2] -1


<3>[   12.678265] msm_sensor_config:1309 subdev_id[3] -1


<3>[   12.682999] msm_sensor_config:1309 subdev_id[4] -1


<3>[   12.687810] msm_sensor_config:1309 subdev_id[5] -1


<3>[   12.692546] msm_sensor_config:1309 subdev_id[6] 2


<6>[   12.695596] wcnss: NV bin size: 29812, total_fragments: 10


<3>[   12.695735] wcnss: no space available for smd frame


<3>[   12.702158] msm_sensor_config:1309 subdev_id[7] -1


<3>[   12.706973] msm_sensor_config:1309 subdev_id[8] 2


<3>[   12.711565] msm_sensor_config:1309 subdev_id[9] -1


<3>[   12.716400] msm_sensor_config:1292 ov5648_oty5f03 cfgtype = 9


<3>[   12.722058] msm_sensor_config:1319 init params mode 1 pos 1 mount 90


<3>[   12.725709] wcnss: no space available for smd frame


<3>[   12.745510] wcnss: no space available for smd frame


<3>[   12.776225] wcnss: no space available for smd frame


<3>[   12.784838] hdmi_tx_get_audio_edid_blk: failed. HDMI is not connected/ready for audio


<3>[   12.806648] wcnss: not setting up vbatt


<3>[   12.862944] hdmi_tx_get_audio_edid_blk: failed. HDMI is not connected/ready for audio


<6>[   12.876223] dwc3 f9200000.dwc3: Avail curr from USB = 0


<3>[   12.893706] hdmi_tx_get_audio_edid_blk: failed. HDMI is not connected/ready for audio


<3>[   12.941670] MSM-CPP msm_cpp_poll:449 Poll failed: expect: 0x1


<6>[   12.954376] android_work: android_work: did not send uevent (0 0   (null))


<3>[   12.989580] MSM-CPP msm_cpp_poll:449 Poll failed: expect: 0x1


<4>[   12.998627] iptables used greatest stack depth: 5216 bytes left


<3>[   13.042989] MSM-CPP msm_cpp_poll:449 Poll failed: expect: 0xabcdefaa


<3>[   13.043096] msm_routing_get_dolby_dap_param_to_get_control, port_id not set, returning error


<3>[   13.043188] APR: Wrong parameters


<3>[   13.043194] adm_get_params: Failed to Get Params on port 16385


<3>[   13.043199] msm_routing_get_rms_value_control: get parameters failed


<6>[   13.074080] MSM-CPP cpp_load_fw:838 MC Bootloader Version: 0x3e646d63


<6>[   13.087629] MSM-CPP cpp_load_fw:850 CPP FW Version: 0x1002000a


<6>[   13.089571] ft5x06_ts 2-0038: Already in awake state


<3>[   13.123320] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=20 handle=f3293700


<6>[   13.130723] android_work: android_work: sent uevent USB_STATE=CONNECTED


<6>[   13.132181] android_work: android_work: sent uevent USB_STATE=DISCONNECTED


<6>[   13.316210] ft5x06_ts 2-0038: Already in awake state


<6>[   13.316292] hdmi_tx_sysfs_enable_hpd: 1


<6>[   13.317907] hdmi_tx_hpd_on: HDMI HW version = 0x30000001


<6>[   13.376563] android_work: android_work: sent uevent USB_STATE=CONNECTED


<6>[   13.396074] android_usb gadget: high-speed config #1: fe8050c8.android_usb


<7>[   13.396149] diag: USB connected


<6>[   13.396503] dwc3 f9200000.dwc3: Avail curr from USB = 500


<6>[   13.455571] android_work: android_work: sent uevent USB_STATE=CONFIGURED


<3>[   13.608127] hdmi_tx_get_audio_edid_blk: failed. HDMI is not connected/ready for audio


<7>[   13.645222] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs


<6>[   13.701924] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset


<3>[   13.775614] Notify: smsm init


<6>[   13.817497] pil-q6v5-mss fc880000.qcom,mss: mba: Power/Clock ready interrupt received


<6>[   13.817546] pil-q6v5-mss fc880000.qcom,mss: Subsystem error monitoring/handling services are up


<3>[   13.819469] msm_ipc_router_send_control_msg: xprt_info not initialized


<3>[   13.819504] msm_ipc_router_send_control_msg: xprt_info not initialized


<3>[   13.831565] msm_ipc_router_send_control_msg: xprt_info not initialized


<3>[   13.853872] msm_ipc_router_send_control_msg: xprt_info not initialized


<3>[   13.873411] msm_ipc_router_send_control_msg: xprt_info not initialized


<6>[   14.046104] apr_tal:Modem Is Up


<3>[   14.052993] diag: In diag_send_msg_mask_update, invalid status 0


<3>[   14.059143] diag: In diag_send_log_mask_update, invalid status 0


<6>[   14.332605] sps:BAM 0xfc834000 is registered.


<6>[   14.341068] sps:BAM 0xfc834000 (va:0xc5a08000) enabled: ver:0x20, number of pipes:6


<4>[   16.082064] QSEECOM: qseecom_release: data: released = false, type = 1, data = 0xf4ab9f00


<6>[   17.184596] alarm_set_rtc: Failed to set RTC, time will be lost on reboot


<6>[   18.505818] lowmem_shrink: convert oom_adj to oom_score_adj:


<6>[   18.505826] oom_adj 0 => oom_score_adj 0


<6>[   18.505831] oom_adj 1 => oom_score_adj 58


<6>[   18.505835] oom_adj 2 => oom_score_adj 117


<6>[   18.505840] oom_adj 3 => oom_score_adj 176


<6>[   18.505844] oom_adj 9 => oom_score_adj 529


<6>[   18.505848] oom_adj 15 => oom_score_adj 1000


<6>[   18.790898] acc_open


<6>[   18.790918] acc_release


<6>[   20.446370] calling msm_rng_bus_scale(LOW)


<6>[   20.460470] msm_thermal: Core control disabled


<6>[   20.465128] cpubw-krait: Enabling CPU BW monitoring


<6>[   20.477286] msm_thermal: Core control enabled


<3>[   20.741028] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit


<4>[   21.920726] QSEECOM: qseecom_release: data: released = false, type = 1, data = 0xf2178200


<6>[   22.645599] wcnss_post_bootup: Cancel APPS vote for Iris & WCNSS


<6>[   26.043151] BIN_TOUCH fingerdown=0 


<6>[   26.051363] BIN_TOUCH fingerdown=1 


<6>[   26.059926] BIN_TOUCH fingerdown=1 


<6>[   26.068471] BIN_TOUCH fingerdown=1 


<6>[   26.077254] BIN_TOUCH fingerdown=1 


<6>[   26.085816] BIN_TOUCH fingerdown=1 


<6>[   26.094172] BIN_TOUCH fingerdown=1 


<6>[   26.102742] BIN_TOUCH fingerdown=1 


<6>[   26.111473] BIN_TOUCH fingerdown=1 


<6>[   26.120023] BIN_TOUCH fingerdown=1 


<6>[   26.128494] BIN_TOUCH fingerdown=1 


<6>[   26.137248] BIN_TOUCH fingerdown=1 


<6>[   26.145653] BIN_TOUCH fingerdown=1 


<6>[   26.154671] BIN_TOUCH fingerdown=1 


<6>[   26.163858] BIN_TOUCH fingerdown=1 


<6>[   26.172986] BIN_TOUCH fingerdown=1 


<6>[   26.182320] BIN_TOUCH fingerdown=1 


<6>[   26.191081] BIN_TOUCH fingerdown=1 


<6>[   26.200271] BIN_TOUCH fingerdown=1 


<6>[   26.209168] BIN_TOUCH fingerdown=1 


<6>[   26.218220] BIN_TOUCH fingerdown=1 


<6>[   26.227283] BIN_TOUCH fingerdown=1 


<6>[   26.236450] BIN_TOUCH fingerdown=1 


<6>[   26.245469] BIN_TOUCH fingerdown=1 


<6>[   26.254507] BIN_TOUCH fingerdown=1 


<6>[   26.263618] BIN_TOUCH fingerdown=1 


<6>[   26.272630] BIN_TOUCH fingerdown=1 


<6>[   26.281858] BIN_TOUCH fingerdown=1 


<6>[   26.290858] BIN_TOUCH fingerdown=1 


<6>[   26.300021] BIN_TOUCH fingerdown=1 


<6>[   26.309025] BIN_TOUCH fingerdown=1 


<6>[   26.318085] BIN_TOUCH fingerdown=1 


<6>[   26.327191] BIN_TOUCH fingerdown=1 


<6>[   26.336202] BIN_TOUCH fingerdown=1 


<6>[   26.345375] BIN_TOUCH fingerdown=1 


<6>[   26.354145] BIN_TOUCH fingerdown=1 


<6>[   26.363635] BIN_TOUCH fingerdown=1 


<6>[   26.372515] BIN_TOUCH fingerdown=1 


<6>[   26.381396] BIN_TOUCH fingerdown=1 


<6>[   26.390178] BIN_TOUCH fingerdown=0 


<4>[   26.717792] QSEECOM: qseecom_release: data: released = false, type = 1, data = 0xf2177880


<3>[   29.924383] mdss_dsi_isr: isr=3210202 1000000


<3>[   29.924395] mdss_dsi_fifo_status: status=cccc1000


<3>[   29.924404] mdss_dsi_timeout_status: status=1


<3>[   29.940338] mdss_dsi_isr: isr=3220202 1000000


<3>[   29.940351] mdss_dsi_fifo_status: status=dddd1000


<3>[   29.940359] mdss_dsi_timeout_status: status=1


<3>[   29.940432] mdss_dsi_isr: isr=3220202 1000000


<3>[   29.940443] mdss_dsi_fifo_status: status=88881000


<3>[   29.956999] mdss_dsi_isr: isr=3210202 1000000


<3>[   29.957010] mdss_dsi_fifo_status: status=dddd1000


<3>[   29.957018] mdss_dsi_timeout_status: status=1


<3>[   29.957051] mdss_dsi_isr: isr=3200202 1000000


<3>[   29.957061] mdss_dsi_fifo_status: status=cccc1000


<3>[   29.973672] mdss_dsi_isr: isr=3210202 1000000


<3>[   29.973683] mdss_dsi_fifo_status: status=dddd1000


<3>[   29.973690] mdss_dsi_timeout_status: status=1


<3>[   29.973729] mdss_dsi_isr: isr=3200202 1000000


<3>[   29.973739] mdss_dsi_fifo_status: status=88881000


<3>[   29.990332] mdss_dsi_isr: isr=3210202 1000000


<3>[   29.990343] mdss_dsi_fifo_status: status=dddd1000


<3>[   29.990350] mdss_dsi_timeout_status: status=1


<3>[   29.990415] mdss_dsi_isr: isr=3200202 1000000


<3>[   29.990424] mdss_dsi_fifo_status: status=cccc1000


<3>[   30.007004] mdss_dsi_isr: isr=3210202 1000000


<3>[   30.007014] mdss_dsi_fifo_status: status=dddd1000


<3>[   30.007022] mdss_dsi_timeout_status: status=1


<3>[   30.007056] mdss_dsi_isr: isr=3200202 1000000


<3>[   30.007066] mdss_dsi_fifo_status: status=cccc1000


<3>[   30.023674] mdss_dsi_isr: isr=3220202 1000000


<3>[   30.023685] mdss_dsi_fifo_status: status=dddd1000


<3>[   30.023692] mdss_dsi_timeout_status: status=1


<3>[   30.023721] mdss_dsi_isr: isr=3220202 1000000


<3>[   30.023730] mdss_dsi_fifo_status: status=88881000


<3>[   30.040331] mdss_dsi_isr: isr=3210202 1000000


<3>[   30.040342] mdss_dsi_fifo_status: status=cccc1000


<3>[   30.040349] mdss_dsi_timeout_status: status=1


<3>[   30.040393] mdss_dsi_isr: isr=3200202 1000000


<3>[   30.040401] mdss_dsi_fifo_status: status=cccc1000


<3>[   30.057007] mdss_dsi_isr: isr=3210202 1000000


<3>[   30.057018] mdss_dsi_fifo_status: status=dddd1000


<3>[   30.057026] mdss_dsi_timeout_status: status=1


<3>[   30.057065] mdss_dsi_isr: isr=3200202 1000000


<3>[   30.057075] mdss_dsi_fifo_status: status=88881000


<3>[   30.073674] mdss_dsi_isr: isr=3210202 1000000


<3>[   30.073686] mdss_dsi_fifo_status: status=dddd1000


<3>[   30.073693] mdss_dsi_timeout_status: status=1


<3>[   30.073728] mdss_dsi_isr: isr=3200202 1000000


<3>[   30.073737] mdss_dsi_fifo_status: status=88881000


<3>[   30.090349] mdss_dsi_isr: isr=3210202 1000000


<3>[   30.090358] mdss_dsi_fifo_status: status=dddd1000


<3>[   30.090364] mdss_dsi_timeout_status: status=1


<3>[   30.090412] mdss_dsi_isr: isr=3200202 1000000


<3>[   30.090421] mdss_dsi_fifo_status: status=88881000


<3>[   30.107005] mdss_dsi_isr: isr=3210202 1000000


<3>[   30.107015] mdss_dsi_fifo_status: status=dddd1000


<3>[   30.107023] mdss_dsi_timeout_status: status=1


<3>[   30.107069] mdss_dsi_isr: isr=3200202 1000000


<3>[   30.107079] mdss_dsi_fifo_status: status=cccc1000


<3>[   30.123673] mdss_dsi_isr: isr=3210202 1000000


<3>[   30.123683] mdss_dsi_fifo_status: status=dddd1000


<3>[   30.123690] mdss_dsi_timeout_status: status=1


<3>[   30.123727] mdss_dsi_isr: isr=3200202 1000000


<3>[   30.123737] mdss_dsi_fifo_status: status=cccc1000


<3>[   30.140339] mdss_dsi_isr: isr=3210202 1000000


<3>[   30.140348] mdss_dsi_fifo_status: status=cccc1000


<3>[   30.140355] mdss_dsi_timeout_status: status=1


<3>[   30.140385] mdss_dsi_isr: isr=3200202 1000000


<3>[   30.140394] mdss_dsi_fifo_status: status=cccc1000


<3>[   30.157008] mdss_dsi_isr: isr=3210202 1000000


<3>[   30.157018] mdss_dsi_fifo_status: status=dddd1000


<3>[   30.157025] mdss_dsi_timeout_status: status=1


<3>[   30.157061] mdss_dsi_isr: isr=3200202 1000000


<3>[   30.157071] mdss_dsi_fifo_status: status=cccc1000


你可能感兴趣的:(qualcomm msm8974ab bring up kernel log)