# wrls1.tcl
# A 3-node example for ad-hoc simulation with DSDV

# Define options
set val(chan)           Channel/WirelessChannel    ;# channel type
set val(prop)           Propagation/TwoRayGround   ;# radio-propagation model
set val(netif)          Phy/WirelessPhy            ;# network interface type
set val(mac)            Mac/802_11                 ;# MAC type
set val(ifq)            Queue/DropTail/PriQueue    ;# interface queue type
set val(ll)             LL                         ;# link layer type
set val(ant)            Antenna/OmniAntenna        ;# antenna model
set val(ifqlen)         50                         ;# max packet in ifq
set val(nn)             5                          ;# number of mobilenodes
set val(rp)             AODV                       ;# routing protocol
set val(x)              500                        ;# X dimension of topography
set val(y)              400                        ;# Y dimension of topography  
set val(stop)           150                        ;# time of simulation end

set ns            [new Simulator]
set tracefd       [open simple.tr w]
set windowVsTime2 [open win.tr w]
set namtrace      [open simwrls.nam w]    

$ns trace-all $tracefd
$ns namtrace-all-wireless $namtrace $val(x) $val(y)

# set up topography object
set topo       [new Topography]

$topo load_flatgrid $val(x) $val(y)

create-god $val(nn)

#
#  Create nn mobilenodes [$val(nn)] and attach them to the channel.
#

# configure the nodes
        $ns node-config -adhocRouting $val(rp) \
             -llType $val(ll) \
             -macType $val(mac) \
             -ifqType $val(ifq) \
             -ifqLen $val(ifqlen) \
             -antType $val(ant) \
             -propType $val(prop) \
             -phyType $val(netif) \
             -channelType $val(chan) \
             -topoInstance $topo \
             -agentTrace ON \
             -routerTrace ON \
             -macTrace OFF \
             -movementTrace ON
             
for {set i 0} {$i < $val(nn) } { incr i } {
    set node_($i) [$ns node]    
    $node_($i) set X_ [expr ($i+1)*200.0]
    $node_($i) set Y_ 250.0
    $node_($i) set Z_ 0.0
}

# Set a TCP connection between node_(0) and node_(1)
set tcp [new Agent/TCP/Newreno]
$tcp set class_ 2
set sink [new Agent/TCPSink]
$ns attach-agent $node_(0) $tcp
$ns attach-agent $node_(4) $sink
$ns connect $tcp $sink
set ftp [new Application/FTP]
$ftp attach-agent $tcp
$ns at 10.0 "$ftp start"

# Printing the window size
proc plotWindow {tcpSource file} {
global ns
set time 0.01
set now [$ns now]
set cwnd [$tcpSource set cwnd_]
puts $file "$now $cwnd"
$ns at [expr $now+$time] "plotWindow $tcpSource $file" }
$ns at 10.1 "plotWindow $tcp $windowVsTime2"  

# Define node initial position in nam
for {set i 0} {$i < $val(nn)} { incr i } {
# 30 defines the node size for nam
$ns initial_node_pos $node_($i) 60
}

# Telling nodes when the simulation ends
for {set i 0} {$i < $val(nn) } { incr i } {
    $ns at $val(stop) "$node_($i) reset";
}

# ending nam and the simulation
$ns at $val(stop) "$ns nam-end-wireless $val(stop)"
$ns at $val(stop) "stop"
$ns at 150.01 "puts \"end simulation\" ; $ns halt"
proc stop {} {
    global ns tracefd namtrace
    $ns flush-trace
    close $tracefd
    close $namtrace
}

$ns run