让UltraEdit_17.30.0支持Verilog HDL

【问题描述】如何让UltraEdit_17.30.0支持Verilog HDL语法着色显示？

【软件版本】

UltraEdit_17.30.0.1014_XiaZaiBa

【实现效果】

如图1所示，用UltraEdit_17.30.0打开一个Verilog HDL文件，实现语法着色：

图1 语法着色效果

 

 

【步骤】

1 打开UltraEdit_17.30.0，点击高级->配置

2 在编辑器显示->语法着色->文档的完整目录名称中，查看wordfiles的路径，如图2所示。

图2 查看wordfiles的路径

3 本人的完整路径为：

C:\Documents and Settings\Administrator\Application Data\IDMComp\UltraEdit\wordfiles

 

4 切换至该目录(默认为隐藏，利用文件夹工具->文件夹选项显示隐藏的文件夹)，如图3所示。

图3 显示隐藏的文件夹

4 在wordfiles目录中，添加verilog.uew文件，文件的内容如下：

/L14"Verilog 1364-2001" Line Comment = // Block Comment On = /* Block Comment Off = */ Block Comment On Alt = (* Block Comment Off Alt = *) String Chars = " File Extensions = V VL VMD /Delimiters = ~!@%^&*()-+=|\/{}[]:;"<> , /Function String = "%[ ^t]++^(config[ ^t^p]+[a-zA-Z0-9_]+^)" /Function String 1 = "%[ ^t]++^(module[ ^t^p]+[a-zA-Z0-9_]+^)[ ^t^p]++[(;#]" /Function String 2 = "%[ ^t]++^(task[ ^t^p]+[~(;]+^)[ ^t^p]++[(;#]" /Function String 3 = "%[ ^t]++^(function[ ^t^p]+[~(;]+^)[ ^t^p]++[(;#]" /Function String 4 = "%[ ^t]++^(primitive[ ^t^p]+[~(;]+^)[ ^t^p]++[(;#]" /Function String 5 = "begin[ ^t^p]++^(:[ ^t^p]++[a-zA-Z0-9_]+^)" /Indent Strings = "begin" "case" "fork" "specify" "table" "config" /Unindent Strings = "end" "endcase" "join" "endspecify" "endtable" "endconfig" /Open Fold Strings = "module" "task" "function" "generate" "primitive" "begin" "case" "fork" "specify" "table" "config" "`ifdef" /Close Fold Strings = "endmodule" "endtask" "endfunction" "endgenerate" "endprimitive" "end" "endcase" "join" "endspecify" "endtable" "endconfig" "`endif" /C1"Keywords" always and assign automatic begin buf bufif0 bufif1 case casex casez cell cmos config deassign default defparam design disable edge else end endcase endconfig endmodule endfunction endgenerate endprimitive endspecify endtable endtask event for force forever fork function generate genvar highz0 highz1 if ifnone initial inout input instance integer join large liblist library localparam macromodule medium module nand negedge nmos none nor noshowcancelled not notif0 notif1 or output parameter pulsestyle_onevent pulsestyle_ondetect pmos posedge primitive pull0 pull1 pullup pulldown real realtime reg release repeat rcmos rnmos rpmos rtran rtranif0 rtanif1 scalared showcancelled signed small specify specparam strength strong0 strong1 supply0 supply1 table task time tran tranif0 tranif1 tri tri1 tri0 triand trior trireg use vectored wait wand weak0 weak1 while wire wor xnor xor /C2"System" ** . ** 'b 'B 'o 'O 'd 'D 'h 'H 'sb 'sB 'so 'sO 'sd 'sD 'sh 'sH 'Sb 'SB 'So 'SO 'Sd 'SD 'Sh 'SH ** $ $async$and$array $async$and$plane $async$nand$array $async$nand$plane $async$nor$array $async$nor$plane $async$or$array $async$or$plane $bitstoreal $countdrivers $display $displayb $displayh $displayo $dist_chi_square $dist_erlang $dist_exponential $dist_normal $dist_poisson $dist_t $dist_uniform $dumpall $dumpfile $dumpflush $dumplimit $dumpoff $dumpon $dumpportsall $dumpportsflush $dumpportslimit $dumpportsoff $dumpportson $dumpvars $fclose $fdisplayh $fdisplay $fdisplayf $fdisplayb $ferror $fflush $fgetc $fgets $finish $fmonitorb $fmonitor $fmonitorf $fmonitorh $fopen $fread $fscanf $fseek $fsscanf $fstrobe $fstrobebb $fstrobef $fstrobeh $ftel $fullskew $fwriteb $fwritef $fwriteh $fwrite $getpattern $history $hold $incsave $input $itor $key $list $log $monitorb $monitorh $monitoroff $monitoron $monitor $monitoro $nochange $nokey $nolog $period $printtimescale $q_add $q_exam $q_full $q_initialize $q_remove $random $readmemb $readmemh $realtime $realtobits $recovery $recrem $removal $reset_count $reset $reset_value $restart $rewind $rtoi $save $scale $scope $sdf_annotate $setup $setuphold $sformat $showscopes $showvariables $showvars $signed $skew $sreadmemb $sreadmemh $stime $stop $strobeb $strobe $strobeh $strobeo $swriteb $swriteh $swriteo $swrite $sync$and$array $sync$and$plane $sync$nand$array $sync$nand$plane $sync$nor$array $sync$nor$plane $sync$or$array $sync$or$plane $test$plusargs $time $timeformat $timeskew $ungetc $unsigned $value$plusargs $width $writeb $writeh $write $writeo /C3"Operators" ! % & * + , - // / : ; < = > ? @ ^ { | } ~ /C4"Directives" ** ` `accelerate `autoexepand_vectornets `celldefine `default_nettype `define `default_decay_time `default_trireg_strength `delay_mode_distributed `delay_mode_path `delay_mode_unit `delay_mode_zero `else `elsif `endcelldefine `endif `endprotect `endprotected `expand_vectornets `file `ifdef `ifndef `include `line `noaccelerate `noexpand_vectornets `noremove_gatenames `noremove_netnames `nounconnected_drive `protect `protected `remove_gatenames `remove_netnames `resetall `timescale `unconnected_drive `undef `uselib /C5"DelaysParametersEscaped" # ** \

5 重启UtraEdit，再次打开Verilog HDL就可以实现图1所示语法着色效果了。

 

【参考】

http://www.cnblogs.com/oomusou/archive/2008/07/01/verilog_ultraedit.html

转载于:https://www.cnblogs.com/J2EEPLUS/archive/2012/03/09/2487956.html