windows防火墙命令详解（程序启用命令行执行即可）

netsh firewall set portopening protocol = TCP port = 9998 name = ssssssssssssssssssssssss mode = ENABLE scope = SUBNET profile = CURRENT



netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = localsubnet profile = DOMAIN

 

Old command 针对win7以下版本<包含win7>

Example 1: 启用一个程序

 

Old command	New command
netsh firewall add allowedprogram C:\MyApp\MyApp.exe "My Application" ENABLE	netsh advfirewall firewall add rule name=”My Application” dir=in action=allow program=”C:\MyApp\MyApp.exe” enable=yes
netsh firewall add allowedprogram program=C:\MyApp\MyApp.exe name="My Application" mode=ENABLE scope=CUSTOM addresses=157.60.0.1,172.16.0.0/16,LocalSubnet profile=Domain	netsh advfirewall firewall add rule name=”My Application” dir=in action=allow program=”C:\MyApp\MyApp.exe” enable=yes remoteip=157.60.0.1,172.16.0.0/16,LocalSubnet profile=domain
netsh firewall add allowedprogram program=C:\MyApp\MyApp.exe name="My Application" mode=ENABLE scope=CUSTOM addresses=157.60.0.1,172.16.0.0/16,LocalSubnet profile=ALL	Run the following commands: netsh advfirewall firewall add rule name=”My Application” dir=in action=allow program=”C:\MyApp\MyApp.exe” enable=yes remoteip=157.60.0.1,172.16.0.0/16,LocalSubnet profile=domain netsh advfirewall firewall add rule name=”My Application” dir=in action=allow program=”C:\MyApp\MyApp.exe” enable=yes remoteip=157.60.0.1,172.16.0.0/16,LocalSubnet profile=private

 

Example 2: 启用端口

 

Old command	New command
netsh firewall add portopening TCP 80 “Open Port 80”	netsh advfirewall firewall add rule name=”Open Port 80” dir=in action=allow protocol=TCP localport=80

 

Example 3: 删除已启用的程序或端口

 

Old command	New command
netsh firewall delete allowedprogram C:\MyApp\MyApp.exe	netsh advfirewall firewall delete rule name=rule nameprogram=”C:\MyApp\MyApp.exe”
delete portopening protocol=UDP port=500	netsh advfirewall firewall delete rule name=rule name protocol=udp localport=500

 

Example 4: ICMP配置

 

Old command	New command
netsh firewall set icmpsetting 8	netsh advfirewall firewall add rule name=”ICMP Allow incoming V4 echo request” protocol=icmpv4:8,any dir=in action=allow
netsh firewall set icmpsetting type=ALL mode=enable	netsh advfirewall firewall add rule name=”All ICMP V4” protocol=icmpv4:any,any dir=in action=allow

 

Example 5: 设置日志

 

Old command	New command
netsh firewall set logging %systemroot%\system32\LogFiles\Firewall\pfirewall.log 4096 ENABLE ENABLE	Run the following commands: netsh advfirewall set currentprofile logging filename %systemroot%\system32\LogFiles\Firewall\pfirewall.log netsh advfirewall set currentprofile logging maxfilesize 4096 netsh advfirewall set currentprofile logging droppedconnections enable netsh advfirewall set currentprofile logging allowedconnections enable

 

Example 6:启动防火墙

 

Old command	New command
netsh firewall set opmode ENABLE	netsh advfirewall set currentprofile state on
netsh firewall set opmode mode=ENABLE exceptions=enable	Run the following commands: Netsh advfirewall set currentprofile state on netsh advfirewall set currentprofile firewallpolicy blockinboundalways,allowoutbound
netsh firewall set opmode mode=enable exceptions=disable profile=domain	Run the following commands: Netsh advfirewall set domainprofile state on netsh advfirewall set domainprofile firewallpolicy blockinbound,allowoutbound
netsh firewall set opmode mode=enable profile =ALL	Run the following commands: netsh advfirewall set domainprofile state on netsh advfirewall set privateprofile state on

 

For more information, run the following command:

netsh advfirewall set currentprofile ?

Example 7: 恢复默认防火墙策略

 

Old command	New command
netsh firewall reset	netsh advfirewall reset

 

查看更多的信息,运行以下命令

netsh advfirewall reset ?

Example 8: 启用特定的服务

 

Old command	New command
netsh firewall set service FileAndPrint	netsh advfirewall firewall set rule group=”File and Printer Sharing” new enable=Yes
netsh firewall set service RemoteDesktop enable	netsh advfirewall firewall set rule group="remote desktop" new enable=Yes
netsh firewall set service RemoteDesktop enable profile=ALL	Run the following commands: netsh advfirewall firewall set rule group="remote desktop " new enable=Yes profile=domain netsh advfirewall firewall set rule group="remote desktop " new enable=Yes profile=private