ubuntu搭建局域网dns服务器
局域网dns服务器搭建
服务器系统：虚拟机中的ubuntu，nat模式网络，ubuntu系统内ip是dhcp模式
安装bind9
apt-get install bind9
如果报错The following packages have unmet dependencies
bind9 : Depends: libbind9-160 (= 1:9.11.3+dfsg-1ubuntu1) but 1:9.11.3+dfsg-1ubuntu1.1 is to be installed
一堆is to be installed
大概是因为版本的问题，一个个卸载本机已有的依赖库
apt-get remove libbind9-160
...
假如想新增一个域名testj.com
1.
进入/etc/bind目录
编辑named.conf.default-zones,添加如下文本
zone "testj.com" {
type master;
file "/etc/bind/db.testj.com";
};2.
然后新增file对应的文件，即在/etc/bind目录下新增db.testj.com文件
里面文本如下
;
; BIND data file for local loopback interface
;
$TTL 604800
@ IN SOA testj. root.testj. (
2 ; Serial
604800 ; Refresh
86400 ; Retry
2419200 ; Expire
604800 ) ; Negative Cache TTL
;
@ IN NS testj.
testj.com IN NS 192.168.235.129
www IN A 192.168.235.129
aaa IN A 192.168.235.129
其实就是从db.local赋值过来，修改部分配置,www是主机名，安装了www服务的主机。testj.com是主机，www是主机名
3.
编辑named.conf.options，主要添加listen-on
options {
directory "/var/cache/bind";
listen-on port 53 {192.168.235.129;0.0.0.0;};
allow-transfer {none;};
// If there is a firewall between you and nameservers you want
// to talk to, you may need to fix the firewall to allow multiple
// ports to talk. See http://www.kb.cert.org/vuls/id/800113
// If your ISP provided one or more IP addresses for stable
// nameservers, you probably want to use them as forwarders.
// Uncomment the following block, and insert the addresses replacing
// the all-0's placeholder.
// forwarders {
// 0.0.0.0;
// };
//========================================================================
// If BIND logs error messages about the root key being expired,
// you will need to update your keys. See https://www.isc.org/bind-keys
//========================================================================
dnssec-validation auto;
auth-nxdomain no; # conform to RFC1035
listen-on-v6 { any; };
};4.重启服务
service bind9 restart
5.指明bind9服务器地址
编辑/etc/resolv.conf
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# This is a dynamic resolv.conf file for connecting local clients to the
# internal DNS stub resolver of systemd-resolved. This file lists all
# configured search domains.
#
# Run "systemd-resolve --status" to see details about the uplink DNS servers
# currently in use.
#
# Third party programs must not access this file directly, but only through the
# symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a different way,
# replace this symlink by a static file or a different symlink.
#
# See man:systemd-resolved.service(8) for details about the supported modes of
# operation for /etc/resolv.conf.
nameserver 192.168.235.129
search DHCP HOST
一堆注释，其实就是最后两行有用
nameserver 192.168.235.129
search DHCP HOST
这个文件可能随时被还原，被还原后就不能识别www.testj.com了，或者执行第6步。
6.编辑ip地址配置文件
ubuntu的路径是/etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
auto ens33
iface ens33 inet dhcp
address 192.168.235.129
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameserver 192.168.235.129
dns-search testj.com更多的名称是lo和eth0、eth1，这里是ens33
重要的是dns-nameserver一行，以免/etc/resolv.conf还原，或者失效
第5步、第6步得试，配置过程中轮流换着配置，重启。才能持久生效
end.
ping www.testj.com
浏览器输入www.testj.com就可以了（前提是配置了服务器访问目录，详情自行了解nginx、apache）
本机是可以访问的，但是真实主机访问却失败了，虚拟机中的其他系统访问正常。没有更多的真实设备，先这样吧，以后有空，有需求再研究
ubuntu重启网络服务
/etc/init.d/networking restart
或者service networking restart
ubuntu ip配置文件的路径是/etc/network/interfaces