我们都知道RocketMQ的消息是持久化到文件的，具体的消息的刷盘策略是什么，是发送一条消息就直接持久化到文件中吗？作为一款高性能的消息中间件这样做肯定不行，至少性能上不允许这样操作，那么具体策略是啥我们具体分析下。
1、刷盘策略
RocketMQ提供了两种刷盘策略同步刷盘、异步刷盘
同步刷盘：在消息到达MQ后，RocketMQ需要将数据持久化，同步刷盘是指数据到达内存之后，必须刷到commitlog日志之后才算成功，然后返回producer数据已经发送成功。
异步刷盘：，同步刷盘是指数据到达内存之后,返回producer说数据已经发送成功。，然后再写入commitlog日志。
| 复制方式 | 优点 | 缺点 | 适应场景 |
|---|---|---|---|
| 同步刷盘 | 保证了消息不丢失 | 吞吐率相对于异步刷盘要低 | 消息可靠性要求较高的场景 |
| 异步刷盘 | 系统的吞吐量提高 | 系统断电等异常时会有部分丢失 | 对应吞吐量要求较高的场景 |
下面我们从源码的角度分析其实现的逻辑
2、同步刷盘
CommitLog.putMessage()方法中的刷盘的核心方法handleDiskFlush()
public void handleDiskFlush(AppendMessageResult result, PutMessageResult putMessageResult, MessageExt messageExt) {
// Synchronization flush 同步刷盘
if (FlushDiskType.SYNC_FLUSH == this.defaultMessageStore.getMessageStoreConfig().getFlushDiskType()) {
final GroupCommitService service = (GroupCommitService) this.flushCommitLogService;
//客户端确认要等待刷盘成功
if (messageExt.isWaitStoreMsgOK()) {
//封装刷盘请求对象 nextoffset : 当前内存写的位置 + 本次要写入的字节数
GroupCommitRequest request = new GroupCommitRequest(result.getWroteOffset() + result.getWroteBytes());
//添加刷盘请求（后台定时任务进行刷盘，每隔10毫秒批量刷盘。10毫秒中如果有多个请求，则多个请求一块刷盘）
service.putRequest(request);
//等待刷盘请求结果（最长等待5秒钟，刷盘成功后马上可以获取结果。）
boolean flushOK = request.waitForFlush(this.defaultMessageStore.getMessageStoreConfig().getSyncFlushTimeout());
if (!flushOK) {
log.error("do groupcommit, wait for flush failed, topic: " + messageExt.getTopic() + " tags: " + messageExt.getTags()
+ " client address: " + messageExt.getBornHostString());
putMessageResult.setPutMessageStatus(PutMessageStatus.FLUSH_DISK_TIMEOUT);
}
} else {
service.wakeup();
}
}else {// Asynchronous flush 异步刷盘
if (!this.defaultMessageStore.getMessageStoreConfig().isTransientStorePoolEnable()) {
//唤醒FlushRealTimeService服务线程
flushCommitLogService.wakeup();
} else {
//唤醒CommitRealTimeService服务线程
commitLogService.wakeup();
}
}
}
查看同步刷盘的核心类GroupCommitService中的核心属性
private volatile List
我们查看其run()方法
public void run() {
CommitLog.log.info(this.getServiceName() + " service started");
while (!this.isStopped()) {
try {
//等待通知，如果数据过来，提前结束等待执行onWaitEnd()方法交换读写swapRequests（）
//刷盘请求的requestsWrite->requestsRead
this.waitForRunning(10);
//执行刷盘
this.doCommit();
} catch (Exception e) {
CommitLog.log.warn(this.getServiceName() + " service has exception. ", e);
}
}
//省略代码...
}
waitForRunning方法中执行了swapRequests()方法
private void swapRequests() {
List tmp = this.requestsWrite;
this.requestsWrite = this.requestsRead;
this.requestsRead = tmp;
}
GroupCommitService接收到的刷盘请求通过putRequest()方法加入到requestsWrite集合中，swapRequests()方法将requestsWrite请求集合交换到requestsRead集合中供刷盘使用，我们重点查看doCommit()方法
private void doCommit() {
synchronized (this.requestsRead) {
if (!this.requestsRead.isEmpty()) {
//循环每一个刷盘请求
for (GroupCommitRequest req : this.requestsRead) {
// There may be a message in the next file, so a maximum of
// two times the flush
boolean flushOK = false;
for (int i = 0; i < 2 && !flushOK; i++) {
//判断是否已经刷盘过了，刷盘的位置和当前消息下次刷盘需要的位置比较
flushOK = CommitLog.this.mappedFileQueue.getFlushedWhere() >= req.getNextOffset();
if (!flushOK) {
//0代码立刻刷盘，不管缓存中消息有多少
CommitLog.this.mappedFileQueue.flush(0);
}
}
//返回刷盘的结果
req.wakeupCustomer(flushOK);
}
long storeTimestamp = CommitLog.this.mappedFileQueue.getStoreTimestamp();
//设置刷盘的时间点
if (storeTimestamp > 0) {
CommitLog.this.defaultMessageStore.getStoreCheckpoint().setPhysicMsgTimestamp(storeTimestamp);
}
//清空requestsRead对象
this.requestsRead.clear();
} else {
// Because of individual messages is set to not sync flush, it
// will come to this process
CommitLog.this.mappedFileQueue.flush(0);
}
}
}
mappedFileQueue.flush(0)立刻刷盘
public boolean flush(final int flushLeastPages) {
boolean result = true;
MappedFile mappedFile = this.findMappedFileByOffset(this.flushedWhere, this.flushedWhere == 0);
if (mappedFile != null) {
long tmpTimeStamp = mappedFile.getStoreTimestamp();
//刷盘，返回刷写到磁盘指针
int offset = mappedFile.flush(flushLeastPages);
//计算当前的刷盘指针，之前的所有数据已经持久化到磁盘中
long where = mappedFile.getFileFromOffset() + offset;
result = where == this.flushedWhere;
this.flushedWhere = where;
if (0 == flushLeastPages) {
this.storeTimestamp = tmpTimeStamp;
}
}
return result;
}
mappedFile.flush(0);保证立刻刷盘后面异步刷盘时也会调用mappedFile.flush()方法
3、异步刷盘
if (!this.defaultMessageStore.getMessageStoreConfig().isTransientStorePoolEnable()) {
//唤醒FlushRealTimeService服务线程
flushCommitLogService.wakeup();
} else {
//唤醒CommitRealTimeService服务线程
commitLogService.wakeup();
}
我们发现异步刷盘的时候有两种方式，一种是堆外内存池开启时启动CommitRealTimeService服务线程，另一个是默认执行的FlushRealTimeService服务线程进行刷盘操作，关于TransientStorePoolEnable在《RocketMQ内存映射》章节中的**“创建映射文件MappedFile”**中有介绍
图3-1
1、FlushRealTimeService
查看其run()方法
public void run() {
CommitLog.log.info(this.getServiceName() + " service started");
while (!this.isStopped()) {
// 每次刷盘的间隔时间，默认 200ms
int interval = CommitLog.this.defaultMessageStore.getMessageStoreConfig().getCommitIntervalCommitLog();
// 每次commit最少的页数 默认4页
int commitDataLeastPages = CommitLog.this.defaultMessageStore.getMessageStoreConfig().getCommitCommitLogLeastPages();
// 如果上次刷新的时间+该值 小于当前时间，则改变flushPhysicQueueLeastPages =0 默认为200
int commitDataThoroughInterval =
CommitLog.this.defaultMessageStore.getMessageStoreConfig().getCommitCommitLogThoroughInterval();
long begin = System.currentTimeMillis();
//距离上一次刷盘时间超过200ms则立刻刷盘，commit最少的页数置为0
if (begin >= (this.lastCommitTimestamp + commitDataThoroughInterval)) {
this.lastCommitTimestamp = begin;
commitDataLeastPages = 0;
}
try {
//刷盘
boolean result = CommitLog.this.mappedFileQueue.commit(commitDataLeastPages);
long end = System.currentTimeMillis();
if (!result) {
this.lastCommitTimestamp = end; // result = false means some data committed.
//now wake up flush thread.
flushCommitLogService.wakeup();
}
if (end - begin > 500) {
log.info("Commit data to file costs {} ms", end - begin);
}
this.waitForRunning(interval);
} catch (Throwable e) {
CommitLog.log.error(this.getServiceName() + " service has exception. ", e);
}
}
boolean result = false;
for (int i = 0; i < RETRY_TIMES_OVER && !result; i++) {
result = CommitLog.this.mappedFileQueue.commit(0);
CommitLog.log.info(this.getServiceName() + " service shutdown, retry " + (i + 1) + " times " + (result ? "OK" : "Not OK"));
}
CommitLog.log.info(this.getServiceName() + " service end");
}
}
这种方式和同步刷盘一样就是mappedFileQueue.commit(commitDataLeastPages)参数有限制，数据达到一定量的时候才进行刷盘操作提高数据的刷盘性能。
2、CommitRealTimeService
查看其run()方法
public void run() {
CommitLog.log.info(this.getServiceName() + " service started");
while (!this.isStopped()) {
// 每次刷盘的间隔时间，默认 200ms
int interval = CommitLog.this.defaultMessageStore.getMessageStoreConfig().getCommitIntervalCommitLog();
// 每次commit最少的页数 默认4页
int commitDataLeastPages = CommitLog.this.defaultMessageStore.getMessageStoreConfig().getCommitCommitLogLeastPages();
// 如果上次刷新的时间+该值 小于当前时间，则改变flushPhysicQueueLeastPages =0 默认为200
int commitDataThoroughInterval =
CommitLog.this.defaultMessageStore.getMessageStoreConfig().getCommitCommitLogThoroughInterval();
long begin = System.currentTimeMillis();
//距离上一次刷盘时间超过200ms则立刻刷盘，commit最少的页数置为0
if (begin >= (this.lastCommitTimestamp + commitDataThoroughInterval)) {
this.lastCommitTimestamp = begin;
commitDataLeastPages = 0;
}
try {
//刷盘
boolean result = CommitLog.this.mappedFileQueue.commit(commitDataLeastPages);
long end = System.currentTimeMillis();
//返回的是false说明数据已经commit到了fileChannel中
if (!result) {
this.lastCommitTimestamp = end; // result = false means some data committed.
//now wake up flush thread.
flushCommitLogService.wakeup();
}
if (end - begin > 500) {
log.info("Commit data to file costs {} ms", end - begin);
}
this.waitForRunning(interval);
} catch (Throwable e) {
CommitLog.log.error(this.getServiceName() + " service has exception. ", e);
}
}
boolean result = false;
for (int i = 0; i < RETRY_TIMES_OVER && !result; i++) {
result = CommitLog.this.mappedFileQueue.commit(0);
CommitLog.log.info(this.getServiceName() + " service shutdown, retry " + (i + 1) + " times " + (result ? "OK" : "Not OK"));
}
CommitLog.log.info(this.getServiceName() + " service end");
}
}
我们发现其刷盘方法不一样mappedFileQueue.commit()调用MappedFile.commit()方法
public int commit(final int commitLeastPages) {
if (writeBuffer == null) {
//no need to commit data to file channel, so just regard wrotePosition as committedPosition.
return this.wrotePosition.get();
}
//如果提交的数据不满commitLeastPages则不执行本次的提交，待下一次提交
if (this.isAbleToCommit(commitLeastPages)) {
if (this.hold()) {
commit0(commitLeastPages);
this.release();
} else {
log.warn("in commit, hold failed, commit offset = " + this.committedPosition.get());
}
}
// All dirty data has been committed to FileChannel.
if (writeBuffer != null && this.transientStorePool != null && this.fileSize == this.committedPosition.get()) {
this.transientStorePool.returnBuffer(writeBuffer);
this.writeBuffer = null;
}
return this.committedPosition.get();
}
查看其核心刷盘方法
protected void commit0(final int commitLeastPages) {
int writePos = this.wrotePosition.get();
int lastCommittedPosition = this.committedPosition.get();
if (writePos - this.committedPosition.get() > 0) {
try {
//创建writeBuffer的共享缓存区
ByteBuffer byteBuffer = writeBuffer.slice();
//将指针回退到上一次提交的位置
byteBuffer.position(lastCommittedPosition);
//设置limit为writePos
byteBuffer.limit(writePos);
this.fileChannel.position(lastCommittedPosition);
//将committedPosition指针到wrotePosition的数据复制（写入）到fileChannel中
this.fileChannel.write(byteBuffer);
//更新committedPosition指针为writePos
this.committedPosition.set(writePos);
} catch (Throwable e) {
log.error("Error occurred when commit data to FileChannel.", e);
}
}
}
commit0（）只是将缓存数据加入到fileChannel中，我们在CommitRealTimeService.run()方法中看到唤醒flushCommitLogService线程需要将fileChannel中的数据flush到磁盘中，我们发现两种方式都需要走flushCommitLogService.run()方法最后都执行MappedFile.flush(int)
public int flush(final int flushLeastPages) {
if (this.isAbleToFlush(flushLeastPages)) {
if (this.hold()) {
int value = getReadPosition();
try {
//We only append data to fileChannel or mappedByteBuffer, never both.
if (writeBuffer != null || this.fileChannel.position() != 0) {
this.fileChannel.force(false);
} else {
this.mappedByteBuffer.force();
}
} catch (Throwable e) {
log.error("Error occurred when force data to disk.", e);
}
//设置刷盘后的指针
this.flushedPosition.set(value);
this.release();
} else {
log.warn("in flush, hold failed, flush offset = " + this.flushedPosition.get());
this.flushedPosition.set(getReadPosition());
}
}
return this.getFlushedPosition();
}
两种缓存方式走的刷盘逻辑也不同，可以查看**“图3-1”**两种方式的处理流程图
我们还发现一个方法isAbleToFlush()判断是否需要刷盘
private boolean isAbleToFlush(final int flushLeastPages) {
int flush = this.flushedPosition.get();
int write = getReadPosition();
if (this.isFull()) {
return true;
}
if (flushLeastPages > 0) {
return ((write / OS_PAGE_SIZE) - (flush / OS_PAGE_SIZE)) >= flushLeastPages;
}
return write > flush;
}
同步刷盘时flushLeastPages=0立刻刷盘
异步刷盘时flushLeastPages=4 ,默认是4，需要刷盘的数据达到PageCache的页数4倍时才会刷盘，或者距上一次刷盘时间>=200ms则设置flushLeastPages=0立刻刷盘
同步刷盘时无论消息的大小都立刻刷盘，线程阻塞等待刷盘结果
异步刷盘有两种方式但是其逻辑都是需要刷盘的数据OS_PAGE_SIZE的4倍即（1024 * 4）*4=16k或者距上一次刷盘时间>=200ms时才刷盘，提高数据的刷盘性能